Can't install Thinkpad System update 3.14

Hi everybody
I own a T60 with the latest Windows SP3. I tried to install the latest version of the Thinkpad system update and when it nearly finished, i had this error:
-There is a problem with this Windows Installer package. A problem run as part of the setup did no finish as expected, Contact your support personnel or package vendor. Action StartSuService.EXE, location: C:\Program Files\Lenovo\...\startupservice.exe
After that, i can start anyway the system update but it never install sucessfully my update.
Does anybody know any tricks to get over this problem?
Thank you
JM
Solved!
Go to Solution.

I tried reinstall 4 to 5 times and redownload it 3 times so it was not that.
Anyway i found the problem. It was the services who had been( for unknown reason) desactivate:
So in services.msc i putted "System Update" to Automatic, then Start the services and it work.
Sorry for trouble and thank for the help !!

Similar Messages

  • Can't run Thinkpad System Update

    I have a Thinkpad X230 tablet.  I get a message to run Thinkpad system update.  When I do so, I get a message "unable to connect to proxy server."  I tried downloading and installing the newest version of the software, but when I run it I get the same message.  I do not have trouble connecting to the internet in general.  My firewall is set to allow Lenovo system update.

    Help? Anyone? Please?

  • I've installed a system update as requested, 10.6.7 but mail is not working now.

    I've installed a system update yesterday as requested, all software works fine, except Mail - I get the following message You have mail version 4.5 (1084/1082), it cant be used on Max OSX Version 10.6.7 (Build 10J869).  I've done a complete reinstall of my imac too, but this has not cleared the problem.
    Please help

    Please do this:
    Repair the Hard Drive and Permissions
    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and quit the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Upon satisfactory completion boot from your Snow Leopard DVD and resinstall Snow Leopard. Upon completion you may wish to update it to Mac OS X 10.6.8 Update Combo v1.1.

  • Can't install Win 8 updates - Failure Configuring Windows

    Win 8, 32bit
    There is no way I can go through an update I keep getting a "failed "message after attempting installation. On reboot the comp hangs when trying to configure and I have to reboot which ultimately gives the message "failure configuring windows update, reverting
    changes, do not turn off your computer. I also tried to install multiple updates manually and I get the same problem every single time.
    My Win 8 install was an upgrade from Win7.
    I'm really stuck and would appreciate your help.Arturo
    Arturo

    Hi,
    Also you can try these tests:
    1
    Download and install the System Update Readiness tool: http://support.microsoft.com/kb/947821
    2 Reset Windows Update components:
    http://support.microsoft.com/kb/971058
    Hope that helps.
    Regards,
    Leo  
    Huang
    Leo Huang
    TechNet Community Support

  • Can I stop a system update on my phone once it has started

    Can I stop a system update on my phone once it has started

    You could switch to airplane mode or shut off if in the middle of the download.
    But you don't want to interrupt the install.

  • Can't install EFI Firmware Update

    Hello,
    i can't install the Firmware Update (EFI 1.1) on my MacBook (Core 2Duo, OS X Version: 10.4.10).
    My System is on an GUID partition scheme.
    I get a white screen after the "long beep" and after a few minutes the cpu fan start to run.
    I disconnected all my peripherals but this does not work either.
    Any suggestions?
    Regards,
    jan

    Welcome to Apple Discussions!
    This article explains the firmware more in depth and what to do if there is an issue:
    http://docs.info.apple.com/article.html?artnum=303364

  • R60 died after run BIOS Thinkpad System Update

    Once I got it booting I did some Windows updates, then did the Thinkpad System Update to update drivers as per what Lenovo was saying needed updating. It included a BIOS update which along with the drivers was done. Now the notebook will not boot. It will turn on, the AC, battery and Power lights come on and thats it, the screen stays black and there is no post.
    What can I do to make this notebook work again?

    Hi Yusufbalash,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with No POST on your ThinkPad R60.
    Have you checked with performing power drain by removing the power adapter and battery from the system, hold the power button for 15 to 20 seconds do this process for 2 to 3 times and connect only power adapter and check.
    If you find the issue still persists, then I suggest you to contacts Lenovo technical support of your region and if the system is under warranty please approach any nearby service center.
    Please click here to contact Lenovo customer support for your region to get the detail of service centers.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue.  all other devices here are connecting normally.  any ideas?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

    I installed the system update to 10.7.3. After re-booting, my mail file was missing from the dock.  Looked in applications and the mail application is missing. Any thoughts?

    Thanks Paul; but, taking your suggestion didn't solve the problem.  As mail is part of the OS, the updates don't have the capacity to reinstall applications; so, I had to reinstall the OS.  I now have my mail back (although it didn't appear on the dock--I had to go to applications and activate it and then put it back in the dock.  Thanks again for trying.

  • HT1222 I can't upload the system update in my IPad 2.....

    I can't upload the system updates in my iPad 2. An error massage appears.

    And the error message is ... ?

  • Hi, i have question about my macBook pro.  I have a somehow managed to delete a driver or no, so I can not install new software updates. I have tried for several hours to fixe it on OS X tools-Disc Tools. anyone has a clue about this more than I have.

    I have a somehow managed to delete a driver or no, so I can not install new software updates. I have tried for several hours to fixe it on OS X tools-Disc Tools. anyone has a clue about this more than I have about Mac´crack that **** formatted and has really nothing to the HD. what do I do??
    <Edited by Host>

    Cami87,
    which model MacBook Pro do you have, and which version of OS X is installed on it?

  • Can't Install (Nokia Software Updater) Software

    Can't Install (Nokia Software Updater) Software
    i try to install this software.but they will be come out this error
    [Error 1935.An error occurred during the installation of
    assembly component
    {303994BA-6487-47AE-AF1D-7AF6088EEBDB}.
    HRESULT:0x80070057.]
    some one can help me?

    There are already so many discussions about installation of NSU and PCSuite, that is better for you do a little search and see if you find your solution. But, just my guess, could be a registry problem...

  • I can't install itunes; the update crashed error 7 Windows error 126

    I can't install itunes; the update crashed error 7 Windows error 126
    PC with Windows 7
    I have been using itunes for many years

    I have the same problem as yours too. It always says ''The older version of Apple Software Update cannot be removed. Contact your technical support group''.

  • Can't install apps or update them, can't listen to music from the iphone,siri doesn't work

    Can't install apps or update them, can't listen to music from the iphone,siri doesn't work

    Doesn't matter I rebooted the iphone and now everything works fine.

  • Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

    Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

    Check your Network control panel and turn off Auto-Proxy setting.
    This is one of the top #4 "how can they do this' pet-peeve errors.
    The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
    Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
    If auto proxy isn't it, router/modem and DNS settings.

Maybe you are looking for