CAN'T INSTALL TIME CAPSULE UPDATE

I get an invalid password / user id when I attempt to install the time capsule update.

use the utility that does have some utility.. verb not just noun.
http://support.apple.com/kb/DL1482

Similar Messages

HT1178 Can I install Time Capsule strictly as a back-up to my local devices?

Can I install Time Capsule strictly as a back-up to my Windows laptop and Apple devices without using it as an Airport Extreme Base Station? I do not want to use my Time Capsule as my access to the Internet, just as a back-up. I have U-verse voice and data services and am using their wireless router to connect to the Internet.

You are asking multiple questions..
The setup of the TC can have a whole bunch of variations. If you followed the instructions to plug in by ethernet and turn off wireless, then all connection is via the uverse modem router.
TerrenceV wrote:
Thank you. Since I am not using my TC to connect to the Internet - I have U-verse, so I installed AT&T's wireless router - it was recommended that I put the TC into bridge mode and connect it to the router using the ethernet. Without wireless, how do I send my backups to the TC?
If you don't use wireless then you use ethernet.. it can be plugged into either the uverse router or the TC..makes no difference.
Should I disconnect the ethernet, re-establish wireless, and let all my Apple and Windows 7 devices use their active wireless connections to backup to the TC? If so, how do I direct the backups to TC? I have Airport installed on my Windows 7 primary computer. Again, thanks for the help.
Why do you want to use wireless if you have ethernet? Ethernet is much better and faster.
If ethernet is not available you can use wireless.. if you turned off wireless in the TC.. then all connections will be via the uverse .. TC .. nothing wrong with that.
If you leave the TC wireless on.. then you can connect to TC instead and use TC. That is also fine.. makes no difference .. use what works.
I think you need to play some more.. you questions show you are not understanding the fundamentals..
In bridge the TC is a dumb hard drive.. plus switch.. plus wireless AP.
Plugged into the uverse router.. it is like the uverse router now has more switch ports.. a secondary wireless AP and a hard disk.. they are effectively one unit. Any connection to uverse is connection to TC.. any connection to TC is connection to uverse..

First timer. Just installed Time Capsule. The first backup looks like it will take two days at the pressent speed. Can I close MacBook Pro and have first back up continue, and can I unplug and plug in at work without affecting the backup?

I'm a first timer on this (or any) help site. I just installed Time Capsule. The first backup looks like it will take two days at the present speed. Can I close MacBook Pro and have first back up continue, and can I unplug tomorrow and plug in at work without affecting the backup?

Hi Oneinspirit,
Time Machine backups can be paused by choosing "Stop Backing Up" from the Time Machine icon on the right hand side of your menu bar ( ). Once you're ready to resume the backup, you can choose "Back Up Now" from the same icon.
Start a backup: Click the Time Machine icon in the menu bar, then choose Back Up Now.
Pause a backup: Click the Time Machine icon in the menu bar, then choose Stop Backing Up.
OS X Yosemite: Start, pause, and resume a Time Machine backup
http://support.apple.com/kb/PH18851
All my best,
Allen

I can't see my network Printers when i installed Time Capsule

I'm hoping someone can help me with this. I had a wireless network using my NetGear router so i can share internet and two network printers. The network printers are connected to the router using ethernet wires. Now that i installed Time Capsule i can't get the Network Printer to print.

I did what you said, made sure that both network printers where turned on connected to TC and ready to print, then i opened my system Preference, Print & Fax, i removed my two printers that where there before and working, then hit the plus sign, add printer, here's what's different, my MacBook Pro, under AppleTalk and one of my printers can up and it now works but the other didn't. So on my iMac i tried the same thing but no printer showed up under AppleTalk, i did find the two printers under "Default" and Bonjour was under "kind" i said install to both and it did. I just tried printing to both printers and now i have two bouncing printer icons on my doc with a massage " Attempting to connect to host 192.168.1.10" for one of the printers and the second "Attempting to connect to host XRX92CABD.local." i'm starting to think that i didn't set up the TC correctly or i have some option in TC setup wrong.

IPhone 4S Can't see Time Capsule Wireless after IO6 update

My iphone can't see my Time Capsule wireless network after upgrading to IO6. My iPad3 works fine after upgrade.
I determined that if I change settings on the TC to 802.11N(b/g) compatible it can see/connect.
Seems to be a problem with the 802.11 5GHz band that the iPhone can't see after the IOS6 update.
Not sure if this is the same issue that others are seeing but could be worth a try to change your router's radio config.
Hopefully Apple sorts this out soon.
Very annoying to upgrade and have existing networking break!!!!
Bad Karma and I just ordered 2 new iPhone 5's

Still having this issue - used to be able to connect prior to this update - The iPhone has no problem auto joining the local Cable WiFi - but still doesn't show the Time Capsule WiFi SSID's in the list. iPad and three other Macs see and can join the Time Capsule WiFi.

Many problems after installing Time Capsule

I am not sure if this is the correct forum. I posted it on the iCloud forum, but think it belongs here. I wasn't able to move it.
Here is my story:
Where do I start!
MacBook Pro ~2009
Software Mac OS X Lion 10.7.4 (11E53)
About the time I installed Time capsule, I started to have the following problem. At fist, i thought the problem as iCloud.
Here is my problem:
1. Can't get iCloud email on my Mac [I can ob my iPhone 4S]
2. I keep getting an error accessing any website: Safari can't verify the identity of the website... This includes Apple.com
3. In my Key Chain, the passwords for Me.com are long apparently random numbers.
4. I can't access any iCloud email from my iCloud that was associated with my ME account. I hahe a secondiCloud account which appears fibe.
5. I can't even open iCloud on Safari. As soon as iCloud shows up on the screen, It says that iCloud had unexpectidly stopped.When i hit the reload option, the error message returns... over and over.
6. When i tried to opem iCloud on Google Chrome, I get a HUGE error message on a red page saying "The server's certificate is no valid!"
There are probably more symptoms that occured, but I am so frustrated I may have forgotten.
Oh yeaf, a week ago I got a new Apple Time Capsile 2T
Maybe it's not iCloud?!?
EDIT: THis did not happen when I first got the TIme Capsule. It started 2 days ago. I also got a message about setting up Back To My Mac, but I only have one Mac [I don't mean that having multiple Macs is an asperation, because I am thourily pleased having "just one Mac", and an iPhone 4S and an iPad 3; That's quite a blessing!]
MacBook Pro, iOS 5.1.1

Easy like beauty when it comes to Networking is in the eye of the beholder.
Your issue is probably double NAT.. the TC should have thrown up warning messages.
On lion
Step one.. install 5.6 utility. And use that exclusively.
http://support.apple.com/kb/DL1482
It will be familiar if you used any previous version of airport utility.
Open the manual setup.. go to Internet tab.. go to connection sharing at the bottom..
The TC must be set to off bridge mode. If not, select that and update the TC.
Now everything is going to totally mess up.. don't worry.. start again by rebooting the entire network.. ie everything off.. not sleep.. not semi-consious.. off. Restart in order.. with 2 min wait.. Modem.. router.. TC.. other network rubbish.. (if you have switch and the like).. clients.
Now try again with emails etc.
I am hopeful.

Can't find Time Capsule or Time Machine

I just installed Time Capsule and am using it as a router and a Time Machine. Using Lion.
Install went well and all worked fine. Both my iMac and husband's MBA backed up fine.
However, we are now both having problems seeing the Time Capsule and automatic backup is failing.
We are connected to our wireless network (via Time Capsule), and internet connection is fine.
When I choose "Back Up Now" I get the message "Time Machine could not complete backup. Backup disk not found."
When I choose "Open Time Machine Preferences" and "Select Disk" the Time Capsule does not appear.
When I go into Airport Utility, the Time Capsuel is not showing. When I click Rescan, it is still unable to find the Time Capsule.
Any ideas?
Suellen
p.s. I'm new to Mac to be gentle

I've been encountering the same problem with a USB hard disk attached to an Airport Extreme Base Station.
(This is effectively what a Time Capsule is anyway, so I think we're talking about the same issue.)
What I've noticed is that the Airport unit gets quite hot to the touch, the light goes out (although occasionally
it remains on) and the Airport is no longer visible to the Airport utility.
The cause is also predictable: a long sustained period of Airport disk activity. For example, two or more
simultaneous Time Machine backups (from different machines), or multiple podcast updates to the same
Airport disk. This is not particularly unusual, especially when downloading video podcasts. Apparently,
Apple engineers did not provide protection for this scenario, because the Airport just overheats and crashes.
In case you're wondering, my units are operating at normal room temperature with no obstructions around
their vent openings.
The only way to recover from this is to remove power from the Airport (or Time Capsule) and then plug it
back in. If there are pending backups, just postpone them for awhile until the unit has cooled off.
If you were downloading podcasts, then iTunes probably crashed anyway. At any rate, you'll need to restart
iTunes if you were using it with a remote library on the affected Airport disk.
I first found this on an Airport Extreme generation 2, but then upgraded to a generation 5 in the hopes that
the problem had been fixed. No such luck. I suspect that the problem also applies to all of the Airports and
Time Capsules. I can hardly wait to see what a Thunderbolt disk does to heat things up!
Apple, if you're paying attention, this should hopefully be fixable with a firmware upgrade. In the long term,
a better worst-case thermal analysis is needed for generation 6 Airport devices, please. These products
should NOT be overheating with what I consider to be normal use.
Now, I never had any problems until I hooked a USB disk drive directly to the Airport Extreme. Having
already had one Airport Express actually go up in smoke (literally), I'm not inclined to see the same thing
happen to my more expensive Airport Extremes. Until Apple offers a remedy, then I expect my solution
will require more expensive hardware connected via an ethernet cable to the Airport device. As wireless
devices, the Airport products work just fine, so I will continue to use them for that purpose at least.
In summary, don't overload these devices with too much sustained high traffic. If they fail the way described,
just unplug them and plug them back in. Let them cool off.
Anyway, I hope this helps others that have run into the same problem. And I hope that Apple engineers
take notice and come up with a remedy.
Thanks for reading.

Vista can't see time capsule

Hi everyone
Just got a new time-capsule. Set it up within minutes on our 4 macs, but the Vista PC can't see it. Installed the airport utility software, but to no avail. It just does not show up in the available networks list.
Any ideas?

I was having similar problems with an XP machine - could not see the time capsule via Airport Utility. I just finished a call with Apple support and they suggested it had to do with the security settings - but that was as much as they could offer at the time ... but they were right!
Via the macbook, I started by knocking down the security to nothing at all (I had previously configured the access by MAC address so didn't feel all that vulnerable for the few minutes I'd be making changes). Originally, it was WPA2 and the XP machine could see the network but never get an address.
After the time capsule updated and, I was able to rescan and see it for the first time on the XP machine. From there, I configured the time capsule via the XP machine using Airport Utility (and if this works for you, via the Vista machine). I set it up for WPA/WPA2 personal. I tried WPA from the start and for the first time, I got a message indicating that the card in my XP machine didn't support WPA2.
Anyway, after updating those settings and letting the time capsule recycle, I was all set and secure on the XP machine. From there, all I had to was go back and connect and supply a password on the macbook to re-establish a connection there.
Message was edited by: atticwalker

How do I turn on SMB Sharing so I can access my Time Capsule remotely via iPad w/FileBrowser app?

I know I can share the time capsule, but I don't want to have to have my computer on, I just want to enable sharing and then access the files via File Browser on my iPad and Stream my movies and music stored at home.

Are you saying that your new Extreme no longer needs for you to enter the terminal script to enable TM backups to an AirDisk?
Yes, exactly that ... although since it is the Mac that runs Time Machine & uses its own system preferences, I don't think it is the new Extreme itself that makes the difference but instead some update to the OS (10.5.5, maybe?). As I understand it, so many users expected that in this respect an Extreme with a USB-connected drive would be the functional equivalent of a Time Capsule that Apple updated the code to support it, even without setting a hidden system preference for Time Machine to show (& use) "unsupported" drives.
IOW, I suspect the key is no longer necessary for anyone running up-to-date system software. If you want to check this, you can use the "defaults" terminal command to do so. For background info, see the Mac OS X Manual Page For defaults(1) for its purpose & options, but briefly its three major modes are "read," "write" & "delete." Using the "read" option as I did in my earlier post should tell you if the preference key/value pair exists & if so, how it is set. If you replace "read" in that command with "delete" it will delete the 'show unsupported' key:
<pre> defaults delete com.apple.systempreferences TMShowUnsupportedNetworkVolumes</pre>
You can also leave the key in place but set it to ignore the volumes:
<pre> defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 0</pre>
All I know for sure is that I never entered any 'defaults write' command for this on either of my Macs that run Leopard, & both do show the volumes attached to the Extreme in the Time Machine "Choose Disk" system preference -- but only after the volumes are mounted on those Macs in the Finder.

Hi can I use Time Capsule 4th generation as a back up at the same time between my iMac and HP PC

HI Just bought a 4th generation Time Capsule and after a bit of trouble, I was able to do the following...
1. Connect TC to my modem via ethernet cable
2. Set up my first time Machine from my iMac to Time Capsule
3. Set up my HP PC via ethernet cable to Time Capsule
4. Set up HP Printer Scanner to USB port in Time Capsule, can now print from my PC and iMac using the same printer.
Here is the question...
Can I use Time Capsule (2TB version, not that this should matter, I think) as an external back up for my HP PC, running Windows 7?
I asked this question at Apple Store and they said YES, now I have my doubts as I cannot see Time Capsule as an external drive when I check my PC and computer part there, can see my C drive, D drive (internal backup drive in my PC), E drive (DVD drive) and that is it.
Installed AirPort utility for Windows, have version 5.5 something. I can see TIme Capsule using this at my PC but can I somehow save my HardDrive to Time Capsule, even manually?
Or is the problem that as I started Time Capsule with Time Machine Backup first, it has formatted Time Capsule to support only Apple version, and this is why I cannot see Time Capsule as an external harddrive?
Any help would be appreciated!
I have already an external HD for my Windows PC, just thought this way I could potentially have all the data in one place and also able to use 1 printer...
Many Thanks

Remember Apple Names are not fully SMB compatible..
Reset the TC and do the setup with all SMB naming.. ie.. short, no spaces, pure alphanumeric.
That means TC name eg TC
Wireless name (different for 5ghz) eg TC24ghz and TC5ghz
And hard disk share name.. eg Data
Make sure all passwords also match that convention.. but you can use more characters.. up to 20 or more if you are paranoid. Pure alphanumeric though.
In the file sharing area. set the right workgroup. And it makes life easier turning on the guest account to read and write.
Then in windows explorer simply type
\\TCname or \\TCIPaddress .. obviously you change the names with the actual name or IP.

After installing Time Capsule internet connection slow

Since I installed Time Capsule on my Mac, my internet connection started acting up. The web browsing is VERY SLOW, and applications that are web-based no longer work properly. For instance, I have an EyeFi Wireless Explore SD card and the related EyeFi Manager software that allows me to wirelessly transfer my photos on the eyefi card to the eyefi website, as well as my photo service (Kodak Gallery or Flickr) and also transfers the photos to my Mac. Before I set up my Time Capsule, the eyefi system worked flawlessly. Now the uploads hang up and do not complete. I also have very slow progress trying to use my webmail, or loading webpages in general. I use the Safari browser.
My Time Capsule is set up as a separate wireless network, so I access the internet thru my original home wireless network. Is anyone having the same issues after installing Time Capsule, and does anyone have a solution?

Try doing a Safe Mode reboot by holding down the Shift key when you hear the start-up tone. When the progress bar appears you can release the key. A Safe Reboot will clear some of the caches, it's possible one became corrupt. If that doesn't work do both a SMC and PRAM reset, you may need to do each 2-3x.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

When I try to install Time Machine update I get this message: You cannot install Time Machine and AirPort Updates on this volume. This update requires Mac OS X 10.5.2 or newer. I have OS X 10.5.8.

When I try to install Time Machine update I get this message: “You cannot install Time Machine and AirPort Updates on this volume. This update requires Mac OS X 10.5.2 or newer.” I have OS X 10.5.8.

It's bundled with 10.5.3 and newer and can't be installed separately on those OSes.
(59310)

Mountain Lion installed Time Capsule not seen...

After installing Mountain Lion, my Time Capsule does not exist anymore... I use TC as a router, plugged directely to my MacPro, Mac Mini, and a Wi-Fi network to my 2 MacBookPro. After this instalation, I cannot "see" Time Capsule anymore... my iPhone does not accept my wi-fi... my MacBookPros too...
Please what happened? I cannot even creat a new Wi-Fi, because at the system preferences, network, it is no longer there (wi-fi)
The internet itself is working, I do not know how, because the green light in TC is on, I cannot "see" TC but the internet is there... How is it possible? Time Machine also do not exist...
Any help will be perfect.
Thanks in advance
Mario Lordeiro

Dr. Dave wrote:
Thank you but I returned the device. I was not aware that it is not possible to use unless it has an internet connection. That is not at all what I had in mind. Have a good year!
Maybe they were using imprecise terminology. Seems to happen a lot.
You can use Time Capsule without any Internet (WAN, or outside) connection. But you can only reach Time Capsule through a network (LAN, or local) connection - Ethernet or wireless. I guess a lot of people need to learn that "the Internet" and "a network" are not the same thing.

Mac can not see time capsule

i bought Time capsule over Amazon .Air port works fine , but my mac can not see time capsule,,,sometime does , but most of the time not...
It is a problem with time capsule i have 2 T new generation

You don't mention what type of Mac you have, but is there any way you can move it around to see if that affects the problem? If you hold down an "option" key while you pull down the AirPort/WiFi menu bar item, you should see a value labeled "RSSI" that is the strength of the wireless signal. A value closer to zero is stronger. For example, -30 is decent but -80 is poor.
By the way, you don't seem to have declared any of your system details in your profile or didn't select your details to be included in your post. Those can help people give you correct advice. To update that, click on "Your Stuff" near the top of a window on these discussion groups, then on "Profile". Scroll down to "My Products" and either edit an existing one or add a new one.

Installed Time Capsule, now want to delete/clean files from mac mini HD, is there an easy way to do this?

I've installed Time Capsule and using Time Machine backed up all my files from my Mac Mini (mid 2010) and verified they're there, now, as nervous as I am to do this, I want to clean/delete all the files on my mac mini hard drive, is there an easier and faster way than just moving to trash and deleting them? Looks like that can take hours.
My intention is to use the Time Capsule as a Hard drive so I can clean my Mac Mini hd since it was reaching capacity.
Thanks!

Ok, I just googled how to format my external hard drive to Mac OS extended (Journaled), no problem, understood.
Bear with me, I'm not too computer savvy, then connect to my mac mini, copy all my files to that ext. hd, then in system pref for the TC don't add to exclude?
I don't think I want to keep that also permanently connected to TC as then I'm backing two hardrives?

CAN'T INSTALL TIME CAPSULE UPDATE

Similar Messages

Maybe you are looking for