Can't install USB Labelwriter

Hi I have a problem installing a dymo labelwriter 330 turbo on three iMac G5's (powerpc) running 10.3.9. After I install the print software a I go into Print Setup Utility and one of two things happen;
1. I choose "USB" and it will find new drivers and want to reload them. I say ok then it will say driver not installed.
2. I choose "Dymo Labelwriter" from the printer list. This will cause the Utility to crash and give this error:
"The application irtnreS tepuU itilyt has unexpectedly quit."
This exact scenario happens on all three machines. I've tried three different versions of the printer software, deleted the print pref's and ran a utility to repair the print utility with no success. Any idea's?

Hi jcm98
Welcome to Discussions.
Have you used the latest driver, which can be down loaded from here;
DYMO Label Software Application Version 7.7 for PowerPC AND Intel based Mac OS X
Click on drivers and download and find the one for your Mac.
The instuctions at that site say:
+NOTE: Do not connect the USB cable to your computer or USB hub until instructed to do so during the software installation. If you have a label printer already installed, disconnect the USB cable from your computer before running this installer and reconnect the cable when instructed to do so.+
1. Make sure your label printer is plugged in and turned on before continuing.
2. Open the Printer Setup Utility.
3. In the Print Center/Printer Setup Utility, click Add
4. Select the label printer from the list of choices in the Printer List and click Add
The printer is added to the printer list.
5. Close the Printer Setup Utility
Message was edited by: roam

Similar Messages

Z87-GD65 Can't install USB 3.0 Driver from MSI Site

I have windows 8.1 64bit and i can't install the usb 3.0 driver from the site. It says i do not meet the minimum requirements but after reading them i actually do. This board has so many problems with windows 8/8.1 i just might rollback to windows 7 to rid myself of the issues but shouldnt have to. Is there anything i might be missing?? drivers, software etc..

hmmm, sounds like windows 7 is the way to go with this board for stability. Looks like a future format is in order haha. I went to windows 8 for the boot time which is impressive over 7 but other then that...i hate it haha. Might format the old beast tonight and see what breaks next

No usb ports work, can't instal usb 3 driver

I received an HP Elitebook 8540w laptop from work, the hardrive was wiped with just the OS installed (windows 7 pro 64bit). I downloaded and installed all applicable drivers from here. Everything seems to work except the usb ports. There are three usb 2.0 ports on the left and two usb 3.0 ports on the right. None of them will recognize devices installed in them. My usb optical mouse's laser will flash for a second when it's plugged in and my external drive (1TB Passport) will spin up but never shows in nMy Computer as a accessible drive. Device Manager shows 2 Generic USB Hubs, 2 Standard Enhanced PCI to USB Host Controllers, and 2 USB Root Hubs. Comparing this to my other Elitebook 8540w it is missing a Renesa USB 3.0 Host Controller Hub. THis was one of the drivers installed with the others above but it's not showing anywhere. I've since removed and reinstalled this driver several times with no changes. Runing the USB 3.0 Host Controller Uitility that installs with this driver gives a "USB 3.0 Host Controller not found error." Please help!

Hi, Please check your IT deparment, they may disable USB ports elsewhere. My working laptops (all of them) have same "problem", my IT department even disabled C: drive, optical drive I can't see them anywhere. I can't see Devive Manager. I can only use USB ports to charge my phone or tablet. Regards.

HP laptop can't install usb cable

hi guys i have my HP laptop and i tried to connect lmy iphone using usb cable into it .. but then it doesn't workand said FAILED what tips can u advice ..also i see my device manager under other devices >iphone with an yellow exclamation point then i tried to updated that driver but it says access is denied .your help will be very much appreciated ..

Hello ramziman,
Thank you for posting on the HP Forums!
I understand the iPhone is not properly connecting to the computer. Please try the following troubleshooting steps to resolve the issue:
Go to the Start menu (or Start screen), and type "services.msc" in the search bar (without the quotes). When it appears as an option, right-click and select "Run as administrator". Look for the "Apple Mobile Device" which should be near the top. Ensure it is "Started" and "Automatic". If it is, stop the service. Then, close all Apple programs (iTunes) and unplug the iPhone and any other Apple devices. Then, go back and start the service. At that point, open iTunes and then plug in the iPhone.
Please try this and let me know what happens.
Have a wonderful day!
Mario
I worked on behalf of HP.

Can't install usb

Hello , I apologize in advance for my bad english.
I have a problem with my macbook pro : Several times in the past , I took off some usb without ejecting it , and now I tried to connect a usb key for 3g but nothing appears on the dock to install it but when i connect it on my friend's macbook a window appears. I tried to repair the disk in disk utility but i didn't work. Thank you for your help.

Resetting an Apple portable's System Management Controller (SMC)
http://docs.info.apple.com/article.html?artnum=2238

Mac can't install USB/Ethernet extension Officejet Pro 8610

For some reason I keep getting this error, "The system extension /System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update." during the driver install from my Mac to my new Officejet Pro 8610.
I installed the drivers for my new Officejet Pro 8620 on a different computer and had no issues. Any ideas?
This question was solved.
View Solution.

Hi,
Please try repairing the disk permissions as following:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
Next, go to Computer (click on Finder, then select Go > Computer)
Select your active boot volume (will more likely be listed as Macintosh-HD)and then navigate to System > Library > Extensions. locate the AppleUSBEthernetHost.kext file, copy it to your desktop (for bakcup porpuses) and then delete it from the extensions folder.
Next reinstall the latest software below and check for any change, if the issue been resolved you may delete the backup file from the desktop.
Please let me know if that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

Hi.
You simply can't. Snow Leopard is compiled in Intel binary only.
Good Luck.

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
I can't install using DVD R/W because it's not working.
Please help me.
Thank you.

unlocked by myself
thanks

Can I install os on a hard drive conected through usb

Can I install a OS on a hard drive conected through usb On my macbook pro?
Thanks:)

Will not work.
Mac is not capable of running older version then it shipped with originally.
Allan

Can i install mictodoft on a usb key

I wont to install windows on my laptop but I don't wont it on my hard drive can I install it on a USB key

No, only on the internal drive.

Can I install windows 7 to an external USB 3.0 drive via bootcamp?

with the new airport extremes supporting USB 3.0, can I install windows 7 to an external USB drive via bootcamp?
i'm not willing to sacrafice any of the limited space on the SSD, but i'm very willing to get a good performing USB 3 drive, and use it as necessary with windows.
if this wouldn't work via bootcamp, can it be done on a windows PC and plugged in subsequent to the install to work on the road?

Installing Windows on an external drive is not supported.

I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

1. can i install a SSD? 2. can i upgrade (install new) usb 3 hardware to replace current USB2.0?

Currently running macbook pro 2.4Ghz intel core i7 15'' Late 2011. Wanted to know if and how so (if so), 1. can i install a SSD? 2. can i upgrade (install new) usb 3 hardware to replace current USB2.0?

To installing a SSD, yes, it is possible. See this link to read more.
There are also quite a few YouTube videos on the process.
To the second, no, it's not possible to replace USB 2 with 3 without replacing the system.
Regards,
Gnomish8

How can I install Windows 7 by USB? MacBook late 2008 10.6.8 Boot Camp 3.0.4

Someone please help...
I have tried software update and no luck. I think my Boot Camp on Mac 3.0.4 is not showing me the right option on creating a USB installation. It asks me to load Windows 7 CD when I don't have it, I bought it online... Every download I tried from Apple is .exe and I am losing hope on this one...

You can only install Windows from a USB with one of these Macs:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and later).
- iMac (Late 2012).
- MacBook Air.
If you bought Windows in Internet and you got it in a ISO image, you can burn it into a DVD. Simply double-click the ISO image, open Disk Utility, right-click the ISO image in the sidebar and burn it

Can I install windows 7 on a MBA using a USB flash drive?

I do not have an external DVD drive. Can I install windows 7 on a MBA using a USB flash drive? If so, what's is the procedure?

Hi,
have a look/read here http://www.intowindows.com/how-to-create-bootable-windows-7-usb-to-install-windo ws-7-from-usb-flash-drive-using-windows-7-dvdusb-tool/
Regards
Stefan

Can't install USB Labelwriter

Similar Messages

Maybe you are looking for