Can't install W10 on MX200 - Toshiba Satellite Pro R50-B-165

I've recently purchased this disk but I can't see it in the W10 installer. The BIOS sees the disk. I can install W7 correctly, but I can't install neither W8/W8.1/W10. Both the laptop BIOS and the disk firmware are up to date. I've tried providing the IRST drivers at installation time with no luck at all.  Any idea?

This is caused by windows 10 not including a controller driver for the storage controller your SSD is attached too. Something i noticed is that the windows 10 upgrade will pass preinstall checks if a device has a working driver on it, even if windows 10 has no qualifiable driver to support the device - Quite annoying considering the fact that it actually removes functioning drivers for a storage driver with a boot device in the event 10 has no compatible drivers for that device =_=  The F6 ahci driver needs to be signed and include a signed cat file which has been created with windows 10 support or the driver will fail to load.

Similar Messages

  • Can not instal Win7 WLAN Driver for Satellite C660-168

    I can't install WLAN driver on my Satellite C660-168 after Windows 7 installing.
    What's the problem?

    Hi Admiral,
    And why you cant install it? Do you get an error message or what happens exactly?
    As PauPau wrote you have Broadcom WLAN card so you have to download Broadcom WLAN driver that can be downloaded on Toshiba WLAN portal.
    Before installing the driver make sure you are logged in as Administrator or with Administrator rights. ;)

  • Can I install Windows XP on a Satellite A300D-14P

    Can I install Windows XP on a Satellite A300D-14P?
    ...thx for any info and/or help...

    Hello
    Just to clarify something:
    - if you want to install WXP but not changing BIOS settings (leave it to AHCI mode) at the beginning of installations procedure you must load SATA driver pressing F6. Thats only way to install WXP successfully
    - you can install WXP without SATA driver but you must change the settings to Compatibility. Everything will work well but if you change the settings to ACHI back you will get BSOD every time when you try to start WXP
    If you want to install SATA driver please install WXP using SATA driver before the WXP installation starts.

  • Upgrading Toshiba Satellite Pro A10 hard drive

    Hi
    I have a Toshiba Satellite Pro A10. It is an old laptop, but rather than change it, I would like to install a new hard drive. I have previously put in new RAM to this laptop, but I know the Hard drive change is more complex, so I need as much help as I can get
    The laptop is running well, but the 20GB HDD is obviously too small. I have an external USB hard drive for multimedia stuff etc, but the main HDD, even with just the Windows XP and other software on it is always near to the 20GB and the time has come to change
    I know I can handle the 'hardware' changeover without much problem. I am intending to get a USB enclosure to allow a clone of the old drive to be copied to the new one, so that when I do install it, the only difference to the laptop will be the larger storage capacity on the internal HDD
    I have read extensively about the variety of issues and I am still quite confused. The main issues for me seem to be
    -Whether the BIOS affects the type of internal HDD I can install
    -I am fairly sure the interface I need is ATA-100/IDE. So does this mean I cannot use SATA?
    -What size of HDD can I install? Is there a limit?
    -Does the current internal HDD have partitions? I am not sure? It is the same as it was when I bought it, so would Toshiba have put a partition on it containing OS or software? I don't know. I have 'recovery discs' but no Specific windows disc, as one did not come with the laptop. So considering this, how do I go about 'cloning' the old drive onto the new, and then installing it 'seamlessly'?
    -Do I need specific software for a 'clone'? Otherwise, how do I do it?
    -What do I need to look for in a HDD, when buying? Some sellers seem to see potential issues to do with the capacity, others do not. Im confused
    So, as I say, all I want, is to get a larger internal HDD and install it without problems. Im willing to do the work involved, but only when Im confident I have all the necessary information and 'boxes ticked'. Otherwise I fear it may be a disaster.
    I am not able to afford to buy a new laptop, so all help is very much appreciated
    All advice welcome. Also, if you have any questions just ask
    Thanks in advance
    Jason

    Can you provide the COMPLETE model number and the part number for that model?  I don't want to give you any incorrect information.  The part number would look like this.  PSA10U-3V1JG8
    But based on what you have stated so far I would say you need an EIDE or ATA hard drive.  Due to bios limitations that I am 95% certain will be in place with your model you will be limited to a 120GB or smaller 9.5mm thick 2.5" ATA/EIDE hard drive.  I recommend Western Digital Scorpio BLue drives for their combination of price, performance, and reliability. 
    Once you post the model and part number I can verify this so you can order the correct drive for you system.
    Western Digital has a free version of Acronis True Image that you can download that you can use to clone your old drive to your new drive if you purchase a WD drive.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Toshiba Satellite Pro A10,Windows XP Service Pack 2

    Hi everyone,
    I have a "Toshiba Satellite Pro A10: P4-M 2.2 GHz/XP Pro/15" TFT/40 GB/768 MB".
    I installed the Windows XP Service pack-2 in my notebook.
    After updating to winXP SP2, the only way to start up my comp after putting it in "standby mode" or "hibernation mode" is to witch power off and then start up.
    I reinstalled "Toshiba Power Saver" but nothing came of it.
    What can i do about it?
    Kind regards,
    Krasteff

    Hi Krasteff
    Your problem is difficult. If I had it, I'd try to make the status of the OS as clean as possible.
    Try killing as many of the funny SYSTRAY applications as possible - means the small icons in the SYSTRAY. Some of them will not be killed that easily. Don't spend hours trying...
    Then also try killing any, as You mentioned, antivirus or other services that are not necessary for the system. Check also that You do not have any USB / PC Card devices attached to the system.
    Then try again.
    Works better? Then "walk backwards" means try attaching the devices / starting the applications one by one and retry Hibernating. Keep track of what You reconnect/restart so You know what You did last when the system fails to start up again. There You have the cause of the problem and then You also know where to look for the solution.
    Hope it helps!
    BR Tom

  • Toshiba Satellite PRO A60DU - CPU Features Disable execute bit - Firmware updates?

    Hello everyone,
    I have a problem with a laptop that i've recently gotten. It's a rather old model Toshiba Satellite PRO A60DU / Model #: PSA65E- 01K033DU.
    I wanted to install a new operating system on the laptop (the latest Ubuntu desktop version) and after going through the entire setup, and reboot. I got into the front screen for login and it was giving me the following errors.
    Your CPU appears to be lacking expected security protections. Please check your BIOS settings or for more information run: /usr/bin/check-bios-nx --verbose
    0 packages can be updated.
    0 updates are security updates.
    To run a command as administrator (user "root"), use "sudo <command>".
    See "man sudo_root" for details.
    tjuky@tjuky-laptop:~$ /usr/bin/check-bios-nx --verbose
    This CPU is family 15,model 4, and has NX capabilities but is unable to use these protective features because the BIOS is configured to disable the capability. Please enable this in your BIOS for more details, see: https://wiki.ubuntu.com/Security/CPUFeatures
    After a bit of research i figured out that i had to change the NX settings of my device by going into the setup... and according to all the data that i've found out it's suppose to have the options yet it isn't anywhere in there yet.
    So i reckon a Firmware update would do the trick. However, wherever i look i can't find any firmware updates. So my ultimate questions are;
    1) Is it possible for me to change the NX settings in a way without upgrading my firmware?
    2)Are there any actual firmware upgrades for the device? and so yes, where can i find them?
    I'm quite desperate as you can see, i hope someone is able to help me.
    Kind regards,
    Chuck Smits

    Hello everyone,
    I have a problem with a laptop that i've recently gotten. It's a rather old model Toshiba Satellite PRO A60DU / Model #: PSA65E- 01K033DU.
    I wanted to install a new operating system on the laptop (the latest Ubuntu desktop version) and after going through the entire setup, and reboot. I got into the front screen for login and it was giving me the following errors.
    Your CPU appears to be lacking expected security protections. Please check your BIOS settings or for more information run: /usr/bin/check-bios-nx --verbose
    0 packages can be updated.
    0 updates are security updates.
    To run a command as administrator (user "root"), use "sudo <command>".
    See "man sudo_root" for details.
    tjuky@tjuky-laptop:~$ /usr/bin/check-bios-nx --verbose
    This CPU is family 15,model 4, and has NX capabilities but is unable to use these protective features because the BIOS is configured to disable the capability. Please enable this in your BIOS for more details, see: https://wiki.ubuntu.com/Security/CPUFeatures
    After a bit of research i figured out that i had to change the NX settings of my device by going into the setup... and according to all the data that i've found out it's suppose to have the options yet it isn't anywhere in there yet.
    So i reckon a Firmware update would do the trick. However, wherever i look i can't find any firmware updates. So my ultimate questions are;
    1) Is it possible for me to change the NX settings in a way without upgrading my firmware?
    2)Are there any actual firmware upgrades for the device? and so yes, where can i find them?
    I'm quite desperate as you can see, i hope someone is able to help me.
    Kind regards,
    Chuck Smits

  • Issue Restoring Toshiba Satellite Pro C50-A, Windows 8.1 Pro

    The hard drive that came with my laptop was full so i purchased a new hard drive and i was using the system restore disks that came with my laptop to load windows onto the hard drive, it was working fine up until when i put the third disk in and the disk
    drive didn't activate and it was stuck on the copying files screen, i left it be for half the day when i went to school and when i got back nothing had changed so i hard restarted it and tried again from disk one. same thing happens it worked fine up until
    disk 3 when it just did nothing i had a solid white light (power) and i solid orange light (wifi) and the disk drive light would blink when i inserted the 3rd disk like it was reading it but then it just turned off ( no more light on disk drive)
    Please help
    Win 8.1 Toshiba Satellite Pro C50 - A

    I would suggest you to use some disk checking tool and see if the reading/writing of data is working fine from all the disks. 
    If its fine then you should talk to Toshiba Support on this. 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.
    If you are talking about the hard drive it works fine, i was running Ubuntu on it before this and i never had a problem, and if you are talking about the actual disks they work fine to i have used them before and they are from manufacturer, but to make sure
    i put my old hard drive back in and made a recovery flash disk and its been stuck at 26% for like an hour now...

  • No Warranty for LCD Pixel dead for a new Laptop Toshiba Satellite Pro L300-EZ152​3

    Hey,
    I bought a Toshiba Satellite Pro L300-EZ1523 Laptop in Oct 2009. In January 2010 My motherboard went dead so I have sent the laptop to the Toshiba Depot Center initially they said they will repair it and send it within 3 - 5 Business day but they took nearly 15 days to ship it back.
    Once I have received there is the big surprise. One of the pixel on my screen is dead and I tired calling the Toshiba customer care at 1-800-457-7777 and the transfer the call to Depot center which takes nearly 40 to 50 mins to get an engineer on the call for which we need so much of patients.
    Today I requested to transfer the call to the Case Manager and when I told her about the problem she again tells me to call the depot and file a case with them and the UPS for the damage and she also mentioned that there is no warranty covered for the LCD Screen.
    But when I shipped the laptop to the Toshiba Depot I don't had any dead pixels. Im tired calling Toshiba can anyone help me out.
    Regards,
    Prem.

    I got problem with my Toshiba tecra A9 laptop. There is thick black line at the corner of LCD, I contacted 2 toshiba service centers but they paased me to the Toshiba support. They said that Toshiba will not pay us for LCD repair and asked me to call toshiba support and ask for their autorisation. I also called toshiba support several times, but they just make me confused. They said randomly some bizzare phrases: the service centers should aks us for autorisation no., LCD did not coverd by warranty, You made a physical damage, contact another service center, we will contact you within this business day...
    The reason I have bought Tecra model was that toshiba called it as bussiness class, and offered a 3 years limited warranty!!! But the warranty is a whole fake to cheat with the clients. They even do not care about business and dont understand how our professional life is depends to our laptop. such a shame for them.
    They pay some employees to talk with you several hours, just to deny their warranty and don't give you a good service!
    I wonder how they calculate the repaire cost of LCD. I already find wensite which offer the LCD just for 95$. There are lots of replacement guide all over internet. I will suggest toshiba that I can service them for LCD replacement for as low as 150$. That would be a good business for me and a big deal for toshiba! At least Toshiba will not loose their clients.
    From my side, I will start to aware all student around me at university to never trust Toshiba quality and warranty services and do not risk their professional life with the toshiba product and services! It seems that Dell is going to be the leader in customer services and hence in future market!

  • TS3212 I have a problem with running the itunes download on my new toshiba satellite pro laptop,

    I have downloaded the iTunes software no problems, but when i come to run it a windows pop up comes up saying,
    "This installation package could not be opened. Verify that the package exists and that you can access it, or contact
    the application verifier to verify that this is a valid window installer package"
    as i mentioned it is a brand new Toshiba satellite pro running windows 7 professional,
    any ideas????????????
    mark

    A lot of people have found this works for them:
    Settings/General/Date and Time   Turn OFF Set Automatically
    Set the date to several years in the future
    Try to update again - you will get a different error message
    Go back and turn ON Set Automatically

  • Toshiba Satellite Pro A100 PSAAPE Need Device Drivers

    Hi, I was wondering if anyone may be able to help. My father has been given a Toshiba Satellite Pro A100 (Model Num PSAAPE-00T00KEN) that someone has tried to do a fresh install of windows XP Professional sp2 on. The problem is all the device drivers have been written over and there is no driver disc with the laptop. After looking on the Toshiba website I'm having trouble locating the drivers for this exact model. Could anyone point me in the direction of said drivers or a link to them and also in what order I should download them.
    Thanks for you help, Mick

    Satellite Pro A100-03R (PSAAPE-00T00KEN)
    Mick, the Toshiba drivers and utilities for that European model are here.
    Be sure to follow the order of installation recommended.
       Installation Instructions for Windows XP
    -Jerry

  • Toshiba Satellite Pro A60 Celeron 2.8GHz 256MB sound volume?

    Hi,
    I've recently bought a Toshiba Satellite Pro A60 and am happy with item, but despite turning the volume full music and even the windows event sounds are very quiet? To me it does seem to be significantly quieter that other notepads I've used. Is this the way the item should be working or could it be a possible issue?
    Thanks for any help or advise you can give.

    Hi again
    Do you have this problem using all players or just using DVD player? Is this situation since you bought notebook or it occur later? Everything is possible but I dont think that something is faulty.
    At the end you can contact Service partner and let them check it up.

  • How can i install windows games in my macbook pro

    I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

    As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
    As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

  • Can I install Mountain Lion in my Mac Pro

    Can I install Mountain Lion in my Mac Pro?  This is my main computer and i only wnt to move forward if I know that it is 100% compatible with OS 10.8.  They tell you to look to see when it was built but there is no date that I can see. I'm pretty sure I got it in early 2008 ...  Here's the Hardware overview, without the serial number:
      Model Name:          Mac Pro
      Model Identifier:          MacPro3,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          3.2 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per processor):          12 MB
      Memory:          16 GB
      Bus Speed:          1.6 GHz
      Boot ROM Version:          MP31.006C.B05
      SMC Version (system):          1.25f4
      Serial Number (system):
      Hardware UUID:          449CFA37-8EAE-5A08-9027-1236BC17C747
    Thanks much.

    Yes, you can.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • Can I install Virtual Box on my macbook pro safely if filevault is enable? Lion w 8 g memory.

    Can I install Virtual Box on my macbook pro safely if filevault is enabled? Lion w 8 g memory.

    You are going to have to install Windows first.

  • Can I install Windows 7 on Microsoft Surface Pro 3?

    Hi,
    I want to install Windows 7 on my Microsoft Surface 3 Pro, I want to know that can I install Windows 7 on MS Surface Pro 3 or if I will install Windows 7 on Surface then what features will not be available in Windows 7 Pro ? What will the issues I will face
    after that? Please advise.
    Regards.
    Kashif 

    http://windowsitpro.com/microsoft-surface/can-i-install-windows-7-surface-pro
    I'm glad your page mentioned the Hyper-V alternative but wish it would elaborate on the potential deficiencies or necessary workarounds.  E.g. regarding mouse pointer or Pen, I have W10TP installed as a Hyper-V guest in my Surface Pro 2 and a silly
    thing with it is I need to use Mouse Sonar (e.g. press a Ctrl- key) to find out where the pointer is before clicking.  After that it works fine.  Heh.  Right now I'm not having that problem symptom but I can't get on fully to test this recollection
    because I have forgotten its password.   ; }
    Robert Aldwinckle

Maybe you are looking for