Can't install window xp (disk error)
i want to install my window. but after i install it and it say disk error and tell me to press any key to restart.But i can't press any key,the keyboard is frozen.
what should i do.any advice?
1) The installation works fine on a separate internal empty disk drive. Just insert a SATA drive format it -Mac OS Extended (Journaled)- partition it with Boot Camp and install windows xp pro w/sp2 - OEM. It works. Windows evidently needs lots of uncluttered space with no competition. The more disk space it has the better this works. Obviously you need to have a computer that will accept more than one disk drive like a Mac Pro.
2) The answer I am looking for, however, is how to successfully install windows xp on a partition of the main hard drive that is the Boot drive for OSX.
3) There are two softwares on Version Tracker (Paragon NTFS 7.0.2 & NTFS-3G 2009.4.4) that can format the drive in NTFS but I have had no success in making the Windows start up after installing on the NTFS formatted partition.
4) The answer needs to be either a utility that creates the right atmosphere for windows much like Parallels and VMWare do or a way to enter a couple lines of code that would direct windows to reformat the Boot Camp Partition in NTFS rather than immediately loading windows onto a FAT32 drive that will not boot. I'm not smart enough to create either of these. ----HELP----
5) I am disappointed that Apple was not more specific in their "Boot Camp Setup and Installation Guide" by telling the user what versions of Windows will not work. I have one piece of software that has never been written for an Apple computer in the last ten years or longer and it is not going to happen in the foreseeable future so I need to run windows. ---Come on Apple solve the problem.----
Similar Messages
-
using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro 10.6.8)
Have a read here http://support.apple.com/kb/TS1722 for solution.
Stefan -
I have MacBook Pro 13-inch with retina early 2013 can I install windows on it because I tried but an error appear ( an error occurred while copying files)
If you are on Yosemite, and have a CoreStorage volume (the default), it is not visible on the Windows side. The Apple HFS driver cannot read CS volumes.
You can verify this by running the following command in OSX Terminal.
diskutil cs list
If you get any output, such volumes will not be visible.
As a work around, if you really need it, check the 'Revertible' value. If it is yes, you can revert it to HFS+ by using the following command
diskutil cs revert
Here is the syntax for the command. The LVUUID parameter can be seen as a long string for your Logical Volume. Do not use the Logical Volume Group or any disk UUIDs. If you need the exact command, please post the output from the diskutil cs list command?
diskutil cs revert
Usage: diskutil coreStorage revert
MountPoint|DiskIdentifier|DeviceNode|lvUUID
[-stdinpassphrase | -passphrase [passphrase] | -recoverykeychain file]
Convert a CoreStorage logical volume back to its native type.
The file system must be mounted and resizable (i.e. Journaled HFS+).
Ownership of the affected disk and a passphrase (if encrypted) is required. -
Please help.. I have just tried to install lion on my iMac and it can't complete because of 'disk error'.. can i delete lion and go back to leopard as there was no problem there?? can't get past grey screen
Just restore your bootable backup/clone or Time Machine backup.
-
Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?
I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?
-
Can't install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR.
I can’t install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR, and attempting to format the bootcamp disk does nothing. I have read up on this issue, and the only solution seems to be to make a backup of my computer and reformat all disks via 8.1 setup terminal. I REALLY do not want to do that, is there any way to fix this? I’m on OS X Yosemite, if that pertains to the thread.
Interesting. It wouldn’t install because I had FileVault enabled. Huh. Disabling it saved the day.
-
I can´t install windows 8.1 because boot camp can't partition the disk. I´ve follow many tips but they did´t work (backup, reinstall os, erase space, etc.)
Macbook pro retina
os x yosemite 10.10.2
ThanksThere are several possibilities.
1. You do not have contiguous free disk space.
2. BCA has failed, or you may have a Fusion drive which is causing problems.
3. You have incorrect permissions on the disk.
4. Can you boot in OS X Safe Mode - OS X: What is Safe Boot, Safe Mode? - Apple Support? -
Keep getting error message "FCE" can't install on this disk. A newer version of this software already exists on this disk. Have remove all FCE elements with no success.
http://www.digitalrebellion.com/fcsremover/
-
I get the following error message upon start-up or reboot for Audigy SE:?Windows-No Disk?c0000003 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c.... I have the option to Continue-Cancel-Retry??The sound card seems to work otherwise, but this error is annoying and I would like to resolve it. I tried uninstalling and reinstalling the install CD as this is a new install, but the error persists. Can someone suggest a Fix-It?Thanx!?Lawrence
I have found the Windows No Disk error message to be caused by having a card reader installed in your system in some cases. If you change the dri've letters of the readers from i.e. F: and G: to for example O: and P: (as I did on my machine) the error message will stop. Worth a try.......worked for me. Hope you find this reply useful, unlike the previous wise a$$ replies.
-
I can't install Windows 8.1 on my Imac with Mavericks using Bootcamp. Why?
I can't install Windows 8.1 on my Imac 27" with Mavericks using Bootcamp. Why? I first did all the software updates needed, downloaded the driver software to a 32Gb flash drive formatted as FAT32, fired up Bootcamp Assistant, inserted the Windows 8.1 Full version 64 bit installation DVD as requested, and got as far as partitioning (tried this at 82 Gb for the Windows partition), then the MAC rebooted but halted before getting to the login page. Then a black screen came up with the error message: 'non-system disk - Press any key to reboot'. I did this and nothing happened. I was forced to shut down forcibly then restart with my finger held down on the option key. Then a screen came up with two icons: the macintosh HD icon and the Windows DVD icon. I double-clicked on the Windows DVD icon and the MAC came up with another black screen and error message: 'CDBoot: Couldn't find BOOTMGR'. Had to shut down forcibly again and restart as before, this time ejecting the Windows DVD first. Then I repartitioned my MAC back to all OSX. What the **** do I do now? Applecare couldn't help me beyond this point. They said to contact Microsoft. I notice a lot of other MAC owners have had similar problems.
Please help? tagjsmith.bootcamp does not currently support windows 8.1
-
HELP! iTunes won't load, gives Windows - No Disk error
This is so aggravating!
Last week I purchased $100 worth of audio books to put on my iPod for a vacation. Immediately iTunes wanted me to upgrade to 5.0, so I did. That's where the nightmare began.
With both versions, when I click on the iTunes icon (or the menu item), I get the license agreement, click "agree", then wait a moment before getting the Windows - No Disk error telling me to put a disk in "the drive" (it doesn't specify which drive). The message doesn't go away no matter how many times I click, or how fast, (I've gone into the hundreds). The only way I can get rid of it is to go into control/alt/delete and cancel the iTunes.exe process.
I have now spent about 20 hours trying everything I've seen on all the boards. I have uninstalled using Windows uninstaller; I've reinstalled standalone quicktime; I've installed with the ethernet cord disconnected and the USB's disconnected (including external hard drive); I've made sure all firewalls, etc. were off (McAfee, not Norton). I've done everything but voodoo.
I can roll back to iTunes 4.9 but it won't let me access my very expensive iTunes music and books - it just tries to take me to the music store and tells me to upgrade to 6.0!!!!!
Can someone please help?!hi scottymac!
header; iTunes.exe - No disk
There is no disk in the drive. Please insert a disk into drive \Device\Harddisk\DR5.
hmmm. actually, i've had
b mixed
results when trying to fix this one, and you're actually the first person who's reported only getting it
b some
of the time (that i'm aware of).
so if you don't mind, let's try doing some basic research.
(1) head into your "My Computer" while you've got the ipod plugged in. what drives are being assigned to what drive letters? for reference purposes, here's a screenshot of my "My Computer" window:
http://www.pixentral.com/show.php?picture=1HtsRhQOZw6zixPuie63kEUx4RNKvP0
(your ipod may not show up in this window. don't panic.)
do you get the message when you're in this configuration?
(2) could you head into your itunes "Advanced-General" subtab and take a screenshot of that for us? there's instructions on how to do that given here:
Hudgie, "Taking screenshots to help with problems.", 12:04pm Apr 19, 2005 CDT
love, b -
Hi,
I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
Anyone else had problems or success with this?
Thanks in advance.9thdoc wrote:
I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
You need the Snow Leopard installation disk or a replacement for it. -
How can I install Windows 7 on Macbook Pro 17' (2009 model)?
I cannot Install, neither enter on the setup screen.
When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
Pease help ?Let me get this - because the title misled me as to what you are asking, ie:
I cannot Install, neither enter on the setup screen.
When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
Does the above really tell the story?
The issue isn't "How can I install Windows" but more like "I am trying to get past " an issue with Boot Camp 4.01.
Some people that already had BC 4.x installed had trouble after March's "Patch Tuesday" which was a critical number of security patches and updates. They had to rollback, uninstall an update/driver, before they could move forward.
The trouble with "had to zap pram to get back to Mac OS" is more to do with the health of the partition table and nvram, and you could try using both Windows control panel to set the default OS, and set Startup Disk control panel in Mac OS (click OFF the volume name, then back to the volume, too).
Sometimes there are problems with 3rd party NTFS for OS X that people use as well.
Boot into Lion Recovery - that should be first step if there are problems with Mac, and you don't sound like you tried boot Windows DVD (which I asked above, which can fix errors). -
HELP! sata 3 ssd for hp mini 110-3118cl netbook, but i can't install windows xp on it.
Greetings, I recently bought an ocztech sata III ssd for my hp mini 110-3118cl but I can't install windows xp on it. I have the xp sp3 install version with SATA drivers pre-packed. When the setup goes through the first re-start, it stops, shuts down and re-starts. It also displayed an error at the beggining signaling something missing
SSd's are very expensive and i exclusively want XP, not 7. Any help?
hp mini 110-3118cl
windows xp 32-bitHi:
It is possible that the NM10 ACHI drivers are not part of that package though.
Please read this guide for slipstreaming drivers into a copy of your installation disk and see if that works.
http://www.mediafire.com/?z41dc9tyx4jyyys
Paul -
Windows - No Disk Error - Please help!
Windows - No Disk Error - Please help!
Hi,
I have the following set up:
* Lenovo T-61p
* Windows XP Pro, SP 3
* HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
I am getting the following error:
Windows - No Disk
Exception Processing Message 0xc0000013 Parameters 0x75CE023C
0x84C40C84 0x75CE023C
I have done a lof experimenting and thru process of elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in. In my case, this is drive E. I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
Anyone every any better, more permanent solutions? Or know what the real root of the problem is? What is scanning all the drives and being showing an error message because it found an empty drive?
Thanks and Happy Holidays/New Year!I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.
Maybe you are looking for
-
Discount in PO after final calculation
Hi, We have a requirement that Vendor offers discount after calculating the effective price. This means landed cost of the material would be (Gross Price + CST) - Discount. The discount given should not change Gross Price, Excise Duties and CST. If w
-
My question is I want to buy MacBook Pro special specifications but found several languages at the option of the keyboard I want a picture if you choose the keyboard language is Arabic as well please, I want a picture of the plate you include the k
-
How to have creative p5800 in 5.1 mode and a microphone at the same t
Hello everybody, pls, can somebody advise, how can i use my creative p5800 in 5. mode and at the same time to have microphone working properly. for the moment i have installed my creative as stereo speakers and the mic is plugged?into the sound card,
-
I presently have pc's with Windows Vista, XP, and 7. #1) With the Vista and XP, when I click and drag a photo from one folder to another, a black line appears, indicating where the photo will be dropped. I don't seem to have this handy feature on my
-
Expression must return the interface type
<b>Dear XI experts,</b> My scenario is ; The input parameter for the RFC is send through a file and the response from the RFC comes into XI which is then written into a File (dummy). Finally I want to have Transformation(Message Mapping to IDoc) and