Can't Install Windows 7 on 2011 MacBook Pro with WD HDD

When I install windows 7 vía boot camp the instalation geoes well until the compueter restarts, then it is stuck on "completing installation" it is weird because I was able to install windows 8 and it worked perfectly but I just had issues with programs mado for windows 7 that do not run on windows 8.

Post here:
https://discussions.apple.com/community/windows_software

Similar Messages

I can't install Windows 7 on my Macbook Pro with Retina disaply

Hello,
I'm having a issue installing Windows 7 on my Macbook Pro with Retina (mid 2012), it has no CD drive so I'm able to use Disk-On-Key only.
I've create a partition of 35GB in BootCamp for installing the Windows, then the Bootcamp is restart my machine, and bring me to the windows installer
I got errors that the machine doesent recognize my hard drive.
I would add some pics, but my installer is in Hebrew lang.
please help me guys!

Post here:
https://discussions.apple.com/community/windows_software

Can't install windows XP to a macbook pro with an Intel X25-M SSD

It's a strange problem:
We just bought some new unibody macbook pro 2.8Ghz machines, (4GB ram)etc. We also obtained some of the new Solid State Drives (SSDs) from Intel, the X25M-80GB.
(part number: SSDSA2MH080G1C5)
After installing the SSD into the macbook pro, everything works.....in OSX. Installation of 10.5.5 went without problem, all updates/firmware applied, everything works fine.
The problems start when you try to install XP. We used the boot camp assistant, and created a 32GB partition, put in a XPSP2 disk, and start the installation.
Everything starts up nicely and goes to the blue/white text based installer for XP. It loads drivers, and then reaches the point where it would ask you to select a disk to install to (where you would normally see the three partitions, 1 being the FAT32 you select as C:).
However, what you get instead is an error message that: +"Setup did not find any hard disk drives installed in your computer...."+ and then you have to exit.
If you use the original 320GB drive, everything works as expected, (nothing wrong with the laptop hardware, or the installation CD). If you stay in OSX, everything works as expected. (nothing wrong with the Intel SSD either)
To further add information, we also installed the Intel SSD into a Mac Pro (2008) as a second drive, booting to a windows installation (through boot camp) on the first disk. Windows boots fine, but there is no sign of the other drive AT ALL. (not a driver issue here - there simply isn't any hardware here as far as windows is concerned.)
That brought us to our conclusion that there is something awry in the BIOS/EFI
being presented to Windows, that doesn't support the Intel X25M drive at all.
However, there is no user customisation (or even access) to the settings or what's happening at that point in the boot cycle, so I'm unable to diagnose further.
Given the Intel SSDs are using their SOC (system on a chip), (I believe - but I could be wrong on that one) perhaps that just isn't supported by the EFI?
Would appreciate some advice on where to go from here? These SSDs cost about 1400AUD+ each, so we'd rather like to actually use them....
I suspect we're asking/requiring for an EFI update.
(to head off some questions: Yes, we've used different discs, and also different computers...The disk and hardware themselves are just fine. Also, the drive WAS formatted with a GPT paritition.)
Thanks!

From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
http://discussions.apple.com/thread.jspa?messageID=8482110
http://news.cnet.com/8301-13924_3-10026010-64.html
http://www.intel.com/design/flash/nand/mainstream/index.htm
http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
That won't solve performance issues, but should work.
http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
"My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista

How can i install windows games in my macbook pro

I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

HT3986 can i install window 7 for 13" macbook pro

can i install windows 7 for 13" macbook pro ? I got that in august 2012.

Welcome to the Apple Support Communities
You can install Windows 7 on your computer without any problem. First, determine if you need Boot Camp or a virtual machine > https://discussions.apple.com/docs/DOC-3321
If you need Boot Camp, get a Windows 7 retail DVD, open Boot Camp Assistant and follow the steps to install Windows. If you want all the steps to install it, you can print this PDF file > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf. Windows 8 support will come with a OS X update.
If you need a virtual machine, you can use Parallels, VMware Fusion or VirtualBox. All of them are paid except VirtualBox, and they work well with Windows

Can't install Windows 7 on my Macbook pro.

Hi, I've been trying to install Windows 7 on my Macbook pro, with no luck. I have been able to create a Windows Partition via Bootcamp. And after the Windows 7 installation guide started to expand my Windows files, my Windows 7 CD suddenly stopped spinning. And after a while, the installation guide said that Windows couldn't be installed. And I had to turn off my Mac.

Post here:
https://discussions.apple.com/community/windows_software

Can't install windows 8 on new macbook pro retina display.

I spent my afternoon trying to install Windows 8 Pro on my new Macbook Pro with retina display. I get fairly deep into the installation process using bootcamp when I get a windows message that says something to the effect that windows can't be installed because the hard drive is not formatted in NTSF format. And that is the end of the line.

Welcome to Apple Support Communities
It's normal. Boot Camp Assistant formats the Boot Camp volume in FAT32 because in the past it supported Windows XP and it could use FAT32. This changed with Windows Vista.
The only thing you have to do is to choose the BOOTCAMP partition in this step, and select "Drive options (advanced)". Then, press "Format" and it will be formatted into NTFS, so press Next and the installation will start.
See the Apple's guide > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

HT1338 Can I install Windows 2000 onto my macbook pro

Can I install Windows 2000 or newer on my Macbook Pro. OS x 10.8.5??

Boot Camp supports Windows 7 and 8. There are no hardware drivers for older versions.

Can I install Windows 2000 onto my macbook pro

Can I install Windows 2000 or newer on my Macbook Pro. OS x 10.8.5??

Boot Camp does not support Windows 2000 - it might work sort off, might not perform well if at all.
You can run Windows 2000 in a virtual machine using something like Parallels for Mac, or VMware Fusion.
To install Windows 2000 in a virtual machine you will need the original Windows 2000 Install Media with a useable Product Key.

Install windows 7 on my macbook pro with bootcamp.

I am trying to install Windows 7 off of a dvd version of windows on my macbook pro with bootcamp. I have gotten to the installer screen of windows 7 and each time I proceed, I get an error message saying it does not recognize my drivers. I installed the drivers from bootcamp on a freshly formatted usb drive. I don't understand why it won't read the drivers.

SchafHund wrote:
the computer model is a 13" a1278 mackbook pro mid 2011 and its windows 7 premium.
32 bit or 63 bit Windows?
From the Boot Camp System Requirements page located here: http://support.apple.com/kb/HT5634, there is no mid 2011 13" Macbook Pro.
Here are your choices and the correct Windows Support software version to use:
MacBook Pro
(13-inch, Late 2011)
5
5
4
MacBook Pro
(13-inch, Early 2011)
5
5
4

TS3196 i have installed windows 7 on my macbook pro with retina display but the internet won't work in Windows, please help!!

I have the latest 13" Macbook Pro with Retina Display. I just recently installed Windows 7 through Bootcamp assistant but when I am in Windows the internet doesn't work. How can I fix this??

I found where to download it in bootcamp, I just can't find my usb drive I will need to buy a new one and then give it a shot. I am sure I will be back to ask more questions... thanks for your help.

Installing windows 7 on a macbook pro with retina display

Hi All -
I just purchased a new macbook pro with retina display and I want to install a copy of windows 7 on this machine. I've gone through numersous postings online about the proper way to do this - and I had a few questions as it is a little confusing.
What I have:
15" macbookpro with retina display
External superdrive
Physical copy of windows 7 64 bit
a burned image of the windows 7 disk (as a .CDR file)
Several postings have indicated that I need a flash drive; is this the case if I have the actual disk and the superdrive I can use for reading it?
If not and I do in fact need a flash drive - I have an 8gb with encryption software on it - if I need to make an autoboot for the windows .cdr is there a special way to do this or will the .cdr image work as it is?
I appreciate any help provided.
Thank you
Lenny

Hi - I connected my superdrive but it does not seem to be working - now all I get is a black screen with the prompt - no bootable device; insert boot disk and press any key.
Any thoughts on this? I put an ISO image on my desktop and also created an image on a USB drive - however it has encryption software on it which did not get overwritten so Im not sure if this is why that won't boot.
Does anyone know if the Superdrive can't be used?
My macbook is 3 weeks old - it is all the latest and greatest stuff...

I am trying to install windows 7 to my Macbook pro with bootcamp but every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7", any solutions ?

Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?

Was your Bootcamp info.plist manipulated to change any options?

How to Install Windows 8.1 on MacBook Pro with Retina Display Using Boot Camp?

Hello,
I own a MacBook Pro with Retina Display and was wondering how do I install Windows 8.1 without an optical disc drive? I have bought the full version of Windows 8.1 and would like to partition it on my MacBook Pro. Could someone please help me out by posting step-by-step procedure or a video on how to do it? It is my first time partitioning the Windows operating system and would like to clarify with the community on this before I install it.
Thanks in advance for those who have helped!

Windows 8.1 is not yet supported by Boot Camp. The best way currently to install Windows 8.1 is to use a virtual machine like Parallels, Fusion, or VirtualBox. Installation instructions are on the Parallels, Fusion, and VirtualBox site.

Can't install Windows 7/8 on MacBook Pro 13 Mid-2009

Hello I have a Upgraded 13-inch MacBook Pro, Mid 2009 (Core 2 Duo, 8GB RAM, 250 GB Samsung 840 EVO SSD) and I can't seem to install either Windows 7 or 8.
Windows 7:
I have tried many ISO's and Bootable USB creating methods, Including BootCamp, but once in the installation is progressing I ALWAYS get the following error:
"Windows Cannot install required files. the file may be corrupted or missing... 0x80070570"
When I use a DVD (Created on my PC using Windows 7 USD/DVD download tool) It gets to the installation screen but gets stuck at 0%, I left it for 3 Hours and it was still at 0%.
I got Windows 7 running on VirtualBox flawlessly with the same ISO's without the above error.
Windows 8:
I have created Windows 8.1 Bootable USBs on my PC using various methods, I can view the files when on OS X Mavericks but when a Restart and Hold option I can't see the USB. I can't create a Bootable USB on my mac using bootcamp, I have unlocked the "Create a windows install disk" (but it's not windows 7 OR LATER) and when I try to crate it with my 8.1 ISO I get the error:
"Boot Camp only supports Windows 7 installation on this platform. Please use an ISO file for Windows 7 installation."
And when I use the DVD I created (On my PC) It gets stuck at the Blue Windows Logo
NOTE: When I have my DVD (both windows 7/8) and they're stuck at their respective screens, I can hear the Disc spinning then stopping for a couple of seconds and then spinning for a couple of seconds repetitively.
Thank You In advanced.

Hold your "Option" key down while starting your machine. Continue to hold it down until you are presented with the boot menu which should allow you to select either OS X or Windows (provided you didn't somehow wipe your OS X partition). When you get into OS X, you can go to System Preferences / Startup Disk. Here you can select the default startup partition (OS X or Windows)... when you're installing Windows via BootCamp, it gets changed to Windows so when you finish setting up BootCamp, it automatically reboots and launches the Windows installer. Installing all of the Windows drivers from the OS X DVD should provide you with a Startup Disk option under Windows as well.

Can't Install Windows 7 on 2011 MacBook Pro with WD HDD

Similar Messages

Maybe you are looking for