Can't install Windows 7 on my Macbook pro.

Hi, I've been trying to install Windows 7 on my Macbook pro, with no luck. I have been able to create a Windows Partition via Bootcamp. And after the Windows 7 installation guide started to expand my Windows files, my Windows 7 CD suddenly stopped spinning. And after a while, the installation guide said that Windows couldn't be installed. And I had to turn off my Mac.

Post here:
https://discussions.apple.com/community/windows_software

Similar Messages

Can I install Windows 8 on MacBook Pro retina?

I need to install Windows 8 or 7 in Boot Camp in order to run my embroidery software. What specific form of Windows do I need to install a full version (not an upgrade, since I do not have Windows on the MacBook Pro)? Also, I understand that Boot Camp 5 will not run Windows 8.1. Should I buy Windows 7 and steer clear of 8 altogether?
My Bernina and Floriani embroidery software will run on either Windows 7 or 8.
Many thanks in advance,
Joanna

Yes but with that version, style, it is tied to the first set of hardware, computer, it is installed on. So in theory it can't be moved to another set of hardware, computer.
Message was edited by: LowLuster

How can I install Windows 7 on Macbook Pro 17' (2009 model)?

I cannot Install, neither enter on the setup screen.
When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
Pease help ?

Let me get this - because the title misled me as to what you are asking, ie:
I cannot Install, neither enter on the setup screen.
When I go to Bootcamp (3.0.1) and do everything then at the end when it says to done & restart my Macbook Pro 17' Inch (2009 model (MacbookPro 5,2)).
I get into a white screen (bootscreen) then it goes into a blackscreen. I am in the Setup screen because I hear my DVD reading when I press enter.
When I restart I get back to the Windows Setup but to enter back to Mac OS X I had to reset my PRAM and NVRAM.
Does the above really tell the story?
The issue isn't "How can I install Windows" but more like "I am trying to get past " an issue with Boot Camp 4.01.
Some people that already had BC 4.x installed had trouble after March's "Patch Tuesday" which was a critical number of security patches and updates. They had to rollback, uninstall an update/driver, before they could move forward.
The trouble with "had to zap pram to get back to Mac OS" is more to do with the health of the partition table and nvram, and you could try using both Windows control panel to set the default OS, and set Startup Disk control panel in Mac OS (click OFF the volume name, then back to the volume, too).
Sometimes there are problems with 3rd party NTFS for OS X that people use as well.
Boot into Lion Recovery - that should be first step if there are problems with Mac, and you don't sound like you tried boot Windows DVD (which I asked above, which can fix errors).

How can i install windows 7 on macbook pro lion from usb?

hello am sorry to disturb you
i would like to know the above question since i have looked almost everywhere and i have received no answer
i have a macbook pro i5 with lion
i have been trying for month to install windows 7 as a secondary boot to my mac
but i haven't been able to
things that i have done
-i had downloaded win7 iso
-using another computer i installed win7 on the usb { win to flash }
-i have used bootcamp assistant but apparently i need a dvd of win7 which i currently don't have
-i have installed Reffit but i always get a flashing screen when try to load windows
please i hope you can reply me back if possible
my thoughts are
is that apple disabled the efi on lion to not be able to boot from usb flash drive
my reasoning to this is that is used to work on leopard but not lion
again am trying to boot from usb not burn a disc
please help att alcidio

Rule #1 that TP missed: ISO have to be burned at SLOWEST 2X burn speed to work.
There is/was a long thread but booting Windows from USB-DVD or flash is hit or miss, it may work. USB-DVDs often do not but it is possible to edit the plist to add the Mac ID string to it.
Boot Camp Assistant -
create a partition (done)
download Windows Support Software (drivers to install after Windows is running) (done)
Start the install and boot process - not really needed or essential
And you can use Paragon, you can use Windows 7 or later DVD and do entire install (but on a dedicated 100% Windows hard drive).
Flash drive: has to be MBR and FAT or NTFS (I think, sounds right) same for putting Apple drivers on flash card for which there is an Apple Tech Article.

Can't install Windows on 2013 MacBook Pro

I'm attempting to install 64-bit Windows 8.1 Pro on my 2013 Retina MacBook Pro (15", high end) and running into the same issues that I've seen others have in the past. The main issue is that I get the error "Windows could not prepare the computer to boot into the next phase of the installation. To install Windows, restart the installation." after the installation completes. I've tried other suggestions that I've found online:
Don't use Boot Camp Utility at all, partition the disk with Disk Utility
Format with Windows diskpart
Assign a letter to the EFI partition (B:) to make sure Windows can see it
Partition the disk with gdisk
Use USB 2.0 and 3.0 flash drives
Use both USB ports
Nothing I've done seems to work. Even just wiping the entire drive and trying to install Windows entirely on it's own fails with the same error. I can't even install Windows in BIOS mode (not that I'd want to) because the disk is GPT formatted. I know I could use something like gdisk to force the disk to have a hybrid MBR, but that's a hacky workaround for an inferior solution.
I've read (and tried) the solutions in the 40-page thread from the end of last year, but it doesn't seem to have been updated in a few months. Is there a special method to install Windows on these new MacBooks?

Ok will not work without a fresh install
Restart holding down command R, use disk utility to completely erase the drive and return drive to single Mac journaled partition
Install OSX to this drive
Once OSX is running, restart and do a PRAM reset
Then open disk utility and repair permissions TWICE
Run boot camp assistant and let it do everything, create ISO, DL windows support and install Windows
If you need a clean 8.1 ISO, go http://getintopc.com/softwares/operating-systems/windows-8-1-download/
Good luck

How to install Windows 8 on Macbook Pro w/ Retina Display?

Hi,
I'm new to Macbook Pro w/ Retina Display. I'm a non-tech guy. Well, I'm familiar with Windows PCs but not familiar with Macbook Pros and OS X.
Please if you people can step me step by step that how to Install Windows 8 on Macbook Pro w/ Retina Display 15 inch.
Because recently, Apple released OS X Update 10.8.3 which includes support for Windows 8 in Boot Camp.
I will be very thankful. Please help!
Thanks

Hi Mende1,
Thanks for the fastest reply. Well, As I said I'm non tech noob on Macbook Pro.
Well, The Guide is simple but there are few questions which I'm not able to understop still.
1. How to get the copy of Windows 8? I have bought Windows 8 Ultimate and I have Genuine Key with me but I don't have files.
2. Secondly, I have Bluetooth Apple Wireless Keyboard and Magic Mouse, Is this compatible with Windows 8?
Thanks

Cannot boot from usb flash to install Windows 8 on Macbook Pro 13"

Hi! All
I have a 2011 Macbook Pro 13" and I want to install Windows 8 on it. I use bootable USB stick, which I can boot fine from on my PC, so I assume it's not the USB stick that is a problem. First of all Bootcamp didn't recognise it. Fine, I partitioned the laptop's hard drive myself. Then while rebooting I held the Option key to manually select the USB drive, but it did not appear on the list. As someone suggested on the internet I even replugged USB stick to another slot during while on that screen, but it didn't help too.

Welcome to Apple Support Communities
You can install Windows from a USB drive in one of these Macs:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and newer).
- MacBook Air.
- iMac (Late 2012).
You don't have any of these computers, so you can't install Windows through a USB disk. Its firmware doesn't allow you to start up from your Windows installation disk.
You have to buy Windows 8 on a DVD. You need a System Builder version, which you can buy at Amazon or NewEgg. Follow Apple's steps to install Windows on the MacBook Pro > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

How to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

how to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

There's not much sense in purchasing a Mac to run only Windows on it. Keep in mind that drivers for Windows are a secondary concern for Apple. While Windows will typicall run fine, things like power managment are not optimized under Windows (you'll get less time on battery while running Windows). You will also not be able to install firmware updates. Firmware updates might be necessary whether you run Windows or OS X as they are updates to the code in your hardware and are not OS-specific. You must be running OS X in order to install a firmware update. You can do this even if you boot off of an external drive with OS X installed on it. At the very least, you should keep just a small partition for OS X on your internal drive.

Install Windows 8 on macbook pro with external dvd drive

My superdrive have broken, anyone have experience installing windows 8 on macbook pro with external dvd drive?
Last night, I tried but end of with black screen.

Bguzryanto wrote:
the main point is 'anyone have exprerince install windows 8 with external dvd drive on macbook pro'
Purchase new superdrive, takes 2-3 weeks for shipping at my city.
It can't be done. If your computer has an internal optical drive, working or not, that is the drive you must use. Only computers such as the Macbook Pro Retina/Macbook Air that have no internal optical drive can install Windows from an external drive.

HT3986 I wanna install window 7 in MacBook pro...!! In that, such software like CADD,Pro-E etc will b support to this MacBook pro...???

I wanna install window 7 in MacBook pro. In that, such software like CADD,Pro-E etc will b support to MacBook pro..??

http://www.apple.com/support/bootcamp/
It is not clear what you are asking. You can install Windows 7 on Macbook Pro using Boot Camp Assistant. Follow the linked to instructions. All Windows programs will work just as they would on a Windows PC with similar specs as your Macbook Pro.

Installing Windows on a MacBook Pro

I want to use Boot Camp to install Windows on my macbook pro, is Windows 8 a good option?

Hello all,
I just bought a Macbook air 13 inch 2012, now trying to install Window 7. Since I'm more familiar with Windows, I have no idea of OSX and have a hard time to figure out things
I have tried Boot Camp, but doesn't have a Window 7 or ISO image,
Where can I download it?
Please help me
Thank you

How can I download windows onto a MAcbook Pro if it is not even in the app store?

How can I download windows onto a macbook pro if it is not even offered at the app store?

tlynch58 wrote:
How can I download windows onto a macbook pro if it is not even offered at the app store?
Am I the only one that see's the walled garden horror in that statement?
Go to a Office type store or online and buy a copy of Windows 7 Home Basic, Home or Pro (whatever) and stick the 64bit DVD into the computer.
You'll have to first learn about Bootcamp if your going to want to dual boot, it's complex and a hassle, but gives full hardware performance.
https://www.apple.com/support/bootcamp/
Another way is to first install VMFusion, Parallels or VirtualBox and then install Windows into that, Windows runs like a file in a window on OS X. You can run Windows programs in that, but it's not as powerful as BootCamp method, but more convenient for most normal (non-hardware taxing) programs.

Can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts.

can't install Snow Leopard on Macbook Pro MC700 - 3 beeps after installer starts (10.6.3 retail). Lion installer starts normally. What's a problem?

I have the same trouble, I try installing rEFI but when I try start my Pro from DVD doesn't recognize.
Can I start from USB Memory? with files from SL DVD? or have some thing else?
I have original DVD of SL 10.6.3, if I buy the latest stable version, can I install? or the EFI firmware with Lion change again?
I try to use Lion, more than one week but I can't, and some app that I use for my profession, doesn't work, I really need downgrade to SL.
Really Thanks for any help.
Pablo

How to install Windows 8 on Macbook pro with retina display ?

Hi - How to install Windows 8 on Macbook pro with retina display ?
I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
I am not interested to install it through Parallels or Fusion. Plz guide.
Thanks !

OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp

Cant install windows 8 on macbook pro 13 inch mid2010

Cant install windows 8 on macbook pro 13 inch mid2010 Mountain lion 10.8.3. When i insert the windows 8 CD and try to install it on bootcamp Version 5.0.2 it say "Windows 8 is not supported on this Mac, Boot Camp only supports installing Windows 7 on this Mac. Please insert a DVD which contains a full version of Windows 7." i saw other topics using same mac and they installed it.
Please need help

Your computer is not supported for Windows 8. Read the System Requirements here http://support.apple.com/kb/HT5634. In case you missed the table of supported systems I'll repeat it below. Please note that your computer is listed as not supported.
Mac model
Windows 8, 64-bit
Windows 7, 64-bit
Windows 7, 32-bit
Windows Vista, 64-bit
Windows Vista, 32-bit
Windows XP, 32-bit
MacBook Pro (Retina, 13-inch, Late 2012)
5
5
MacBook Pro (Retina, Mid 2012)
5
5
4
MacBook Pro (13-inch, Mid 2012)
5
5
4
MacBook Pro (15-inch, Mid 2012)
5
5
4
MacBook Pro (17-inch, Late 2011)
5
5
4
MacBook Pro (17-inch, Early 2011)
5
5
4
MacBook Pro (15-inch, Late 2011)
5
5
4
MacBook Pro (15-inch, Early 2011)
5
5
4
MacBook Pro (13-inch, Late 2011)
5
5
4
MacBook Pro (13-inch, Early 2011)
5
5
4
MacBook Pro (13-inch, Mid 2010)
4
4
4
4
4
MacBook Pro (15-inch, Mid 2010)
5
5
4
4
4
4
MacBook Pro (17-inch, Mid 2010)
5
5
4
4
4
4
MacBook Pro (13-inch, Mid 2009)
4
4
4
4
4
MacBook Pro (15-inch, 2.53 GHz, Mid 2009)
4
4
4
4
4
MacBook Pro (15-inch, Mid 2009)
4
4
4
4
4
MacBook Pro (17-inch, Mid 2009)
4
4
4
4
4
MacBook Pro (17-inch, Early 2009)
4
4
4
4
4
MacBook Pro (15-inch, Late 2008)
4
4
4
4
4
MacBook Pro (17-inch, Late 2008)
4
4
4
4
4
MacBook Pro (17-inch, Early 2008)
4
4
4
4
4
MacBook Pro (15-inch, Early 2008)
4
4
4
4
4
MacBook Pro (17-inch, 2.4 GHz)
4
4
4
MacBook Pro (15-inch, 2.4/2.2GHz)
4
4
4
MacBook Pro (15-inch, Core 2 Duo)
4
4
MacBook Pro (17-inch, Core 2 Duo)
4
4
MacBook Pro (17-inch)
4
4
MacBook Pro (15-inch, Glossy)
4
4

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Can't install Windows 7 on my Macbook pro.

Similar Messages

Maybe you are looking for