Can't install with 64 bit XP, service pack 2

If I try the 64 bit installer, it says I need Vista or later. If I try the 32 bit installer, it doesn't install correctly.
What can I do?

Many thanks.
I think you've got two different types of problem going on at once here. Let's try clearing this second error out of the way first.
the second is "Error writing to file: C:\ Program Files(x86)\Common Files\Apple\Apple Application Support\Webkit.resources\inspector\Images\timelinePillGreen.png. Verify that you still have acess to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through without that particular error message afterwards? (Whether this works or not, we still might have to deal with the system services message.)

Similar Messages

Can't install a 32 bit driver on my new 64 bit server

I have a windows 2008 R2 server runing the print server. I have a HP Laserjet 4345 MFP Printer and can't install the 32 bit driver. I have installed the 64 bit but when I try to add the 32 bit driver is states that it is not the correct driver? I have downloaded the PCl 5 Driver (HP_LJ_M4345MFP_PCL5_32bit) But it states it the wrong driver. Please Help
Thanks,
Dave
David Babbel
System Admin

Hi broadwater,
Could you please re-download the package from this link and then install
http://www.adobe.com/go/tryphotoshop_elements/
Regards,
Sandeep

How many IDE drives & CDrom can be installed with SATA drives??

How many IDE drives & CDrom can be installed with SATA drives??
i have 2 IDE hard disks & 2 CDROM drives: can install SATA hard disk added to these drives or do i have to remove some???
& if it can be added, can i install 2 SATA drives???
THX in advance

The 3 versions of this board that are available are:
875P Neo-FISR (PCB 2.0)
875P Neo-LSR (PCB 1.0)
875P Neo-FIS2R (PCB 1.0)
All of these boards will have the following ports provider by the chipsets ICH5R south bridge.
2 x SATA (Supporting 2 SATA HDD drives)
2 x PATA (Supporting 4 IDE devices)
All 6 of these can be used at the same time (provided you are using win XP or 2K) you just need to make sure yor BIOS is set right.
->INTEGRATED PERIPHERALS
->ON-CHIP IDE CONFIG
ATA CONFIG: S-ATA ONLY or P-ATA ONLY
S-ATA/P-ATA KEEP ENABLED: YES
OPERATE MODE:
If you set to "legacy mode" S-ATA are set to channel 1 and 2 and P-ATA to channel 3 and 4. If you set to "native mode" P-ATA are channel 1 and 2 and S-ATA 3 and 4. You can only use the raid functionfon SATA in native mode.
If you have the 875P Neo-FIS2R (PCB 1.0) you will also have the following ports provided by the Promise PDC20378 PCI controller:
2 x SATA (Supporting 2 SATA HDD drives)
1 x PATA (Supporting 1 Master IDE HDD drive)
The PATA port is limited to 1 Master HDD by the lite BIOS. This can in theory be upgraded to the full BIOS supporting a master and a slave, but this may obviously void your warranty.
So the answer to your origional question is:
2 x SATA HDDs and 4 x IDE HDD/CDROM if you have 875P Neo-FISR (PCB 2.0) or 875P Neo-LSR (PCB 1.0)
or
4 x SATA HDDs, 1 x IDE HDD (2 if you modify the BIOS) and 4 x IDE HDD/CDROM if you have 875P Neo-FIS2R (PCB 1.0)

TS3988 This product can not proceed with the activation process, service errors go I want you entered will appear this error I am a Korean. Failed to resolve service center in South Korea Please e-mail response iPad2 32GB Cellular Version

This product can not proceed with the activation process, service errors go I want you entered will appear this error
I am a Korean.
Failed to resolve service center in South Korea
Please e-mail response
iPad2 32GB Cellular Version
<Email Edited by Host>

I'm same. Any Update or News?
Message was edited by: koreasaram

Please help me!!!!!!! what can I do with the message " no service " I have already updated for 5.0.1 (9A406) and nothing happened. Please Help me!!!!! I´m thinking to came back to my nokia. It´s work at least!!!!

Please help me!!!!!!! what can I do with the message " no service " I have already updated for 5.0.1 (9A406) and nothing happened. Please Help me!!!!! I´m thinking to came back to my nokia. It´s work at least!!!!

Please DO go back to your Nokia. I'm sure people on their support forums will love your whining and idle threats just as much as we do.

Is the Oracle apps R12 can be installed with domain name like xyz .co.nz

Dear all,
I am installing R12 on Linux AS-4
I need to know the Oracle apps can be installed with domain name like <xyz>.co.nz on Linux AS-4 environment.
if so please discuss anything other than normal procedure I have to take care?
Till now I have installed much with Domain name as <xyz>.com
Thanks and regards
Vasu

If your domain name has two characters, then you may run into the Microsoft IE 6 bug "Internet Explorer Does Not Set a Cookie for Two-Letter Domains" described in Microsoft article Q310676. The fix for this issue is described in the Microsoft article.
Internet Explorer does not set a cookie for two-letter domains
http://support.microsoft.com/default.aspx?scid=kb;en-us;310676
Apart from the above, you should not have any issue.

Is there any latest ifilter present for 32 bit which can be installed in 64 bit

I have to install 32 bit ifiter for pdf in windows server 2008 64 bit.Becuase I had not any ifilter and also I was not getting any Ifilter link so that I installed Acrobat Reader setup which is 32 bit application.But It has installed in windows server 64 bit perogram files(x86) dir.
Requirement:- I don't have to install complete setup.I need any installer which is 32 bit but can be installed on 64 bit machine program files ( x86 ) folder.

You could also have a look at: http://www.ifilter.org/links_pdf.htm

An error occurred attempting to install SQL Server 2008 Express Service Pack 1

i have Setup application with complete prerequisite requirement package create from Visual Studio 2010 setup application.And yes this setup working fine in windows 7 and windows vista but not working in windows xp service pack 3.and getting error when install "An error occurred attempting to install SQL Server 2008 Express Service Pack 1"Give me solution as soon as possible.I have listed summery.txt and log.txt. please refer it.Summery.txt
===============================================================Component SQL Server 2008 Express has failed to install with the
following error message:
"An error occurred attempting to install SQL Server
2008 Express Service Pack 1."
The following components were successfully
installed:
- Microsoft .NET Framework 4 Client Profile (x86 and
x64)
The following components failed to install:
- SQL Server 2008
Express
See the setup log file located at
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\install.log' for more
information.Install.log
==========================================================================The following properties have been set:
Property: [AdminUser]
= true {boolean}
Property: [InstallMode] = HomeSite {string}
Property:
[ProcessorArchitecture] = Intel {string}
Property: [VersionNT] = 5.1.3
{version}
Running checks for package 'Windows Installer 3.1', phase
BuildList
The following properties have been set for package 'Windows
Installer 3.1':
Running checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running
operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1':
true
Result of checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is
'Bypass'
'Windows Installer 3.1' RunCheck result: No Install
Needed
Running checks for package 'Microsoft .NET Framework 4 Client Profile
(x86 and x64)', phase BuildList
Reading value 'Version' of registry key
'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Client'
Unable to read
registry value
Not setting value for property
'DotNet40Client_TargetVersion'
The following properties have been set for
package 'Microsoft .NET Framework 4 Client Profile (x86 and x64)':
Running
checks for command 'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe'
Result of
running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite':
true
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe' is 'Bypass'
Running checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running
operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Running checks for package 'SQL Server 2008 Express', phase
BuildList
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotExists' on property 'VersionNT': false
Result of running operator
'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of
running operator 'VersionEqualTo' on property 'VersionNT' and value '5.2.0':
false
Result of running operator 'VersionEqualTo' on property 'VersionNT' and
value '5.2.1': false
Result of running operator 'ValueEqualTo' on property
'AdminUser' and value 'false': false
Result of running operator
'ValueEqualTo' on property 'SQLExpressChk' and value '-1': false
Result of
running operator 'ValueEqualTo' on property 'SQLExpressChk' and value '-2':
false
Result of running operator 'ValueEqualTo' on property 'SQLExpressChk'
and value '-3': false
Result of running operator 'ValueEqualTo' on property
'SQLExpressChk' and value '-4': false
Result of running operator
'ValueLessThan' on property 'SQLExpressChk' and value '-4': false
Result of
running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value
'Intel': false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '1': true
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
Running checks for
command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
'SQL Server 2008 Express' RunCheck result: Install Needed
EULA
for components 'Microsoft .NET Framework 4 Client Profile (x86 and x64)' was
accepted.
EULA for components 'SQL Server 2008 Express' was
accepted.
Copying files to temporary directory
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
Downloading files to
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
(11/15/2014 3:59:51 PM)
Downloading 'DotNetFX40Client\dotNetFx40_Client_setup.exe' from 'http://go.microsoft.com/fwlink/?linkid=182804'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 3:59:53 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
(11/15/2014 3:59:53 PM) Downloading
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' from 'http://go.microsoft.com/fwlink/?LinkID=153228&clcid=0x409'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 4:00:22 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Running checks for package 'Microsoft .NET
Framework 4 Client Profile (x86 and x64)', phase BeforePackage
Reading value
'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Unable to read registry value
Not setting value for
property 'DotNet40Client_TargetVersion'
The following properties have been
set for package 'Microsoft .NET Framework 4 Client Profile (x86 and
x64)':
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe'
and parameters ' /q /norestart /ChainingPackage ClientX64ClickOnce /lcid
1033'
Process exited with code 0
Running checks for package 'Microsoft
.NET Framework 4 Client Profile (x86 and x64)', phase AfterPackage
Reading
value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Read string value '4.0.30319'
Setting value
'4.0.30319 {string}' for property 'DotNet40Client_TargetVersion'
The
following properties have been set for package 'Microsoft .NET Framework 4
Client Profile (x86 and x64)':
Property: [DotNet40Client_TargetVersion] =
4.0.30319 {string}
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Result of running operator 'VersionGreaterThanOrEqualTo' on property
'DotNet40Client_TargetVersion' and value '4.0.30129': true
Result of checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe' is
'Bypass'
'Microsoft .NET Framework 4 Client Profile (x86 and x64)' RunCheck
result: Install Succeeded
Running checks for package 'SQL Server 2008
Express', phase BeforePackage
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
'SQL Server 2008 Express'
RunCheck result: Install Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
and parameters '/q /hideconsole /action=Upgrade /instancename=SQLEXPRESS
/skiprules=RebootRequiredCheck'
Process exited with code
-2068578302
Status of package 'Microsoft .NET Framework 4 Client Profile (x86
and x64)' after install is 'InstallSucceeded'
Status of package 'SQL Server
2008 Express' after install is 'InstallFailed'
S S Manne

Hi Manne,
As your description, you come across an error when trying to install SQL Server 2008 express Service Pack 1 on windows XP Service Pack 3 machine. From your error log, I get the error(unable to read registry value). As my analysis, the issue could be due
to that your account doesn't have access to registry. Below are the recommendations for troubleshooting the issue.
1. Make sure that you log in as an administrator of the machine.
2. Please follow the steps below to make sure that you have granted the right permission to registry.
a. Located HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server in registry.
b. Right click and go to Permission, then you could see user accounts or groups. If your user account is not in the list, you could click Add to add your account there.
c. Select your account and Click on Advance.
d. Check on both check box ('Include inheritable permissions from this object's parent'.
and 'Replace all child object permissions with inheritable permissions from this object'), click OK.
e. Click OK again.
Regards,
Michelle Li

Get error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)

I keep getting error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)
Operating System is Windows 2008 R2 64 bit

Hi JamesRead,
According to your description, when you install SQL Server 2008 R2 service pack 1, we need to verify if
you must have administrative rights on the computer.
There are multiple files available for the download, you will be prompted to select the files you need. We need to verify if you run the SQLServer2008R2SP1-KB2528583-x64-ENU.exe. Or you can install SQL server updates from the command
prompt and check if it can install successfully.
You can prepare an installation of database engine instance to include product update:
setup.exe /q /IAcceptSQLServerLicenseTerms /ACTION=PrepareImage /UpdateEnabled=True /UpdateEnabled=True /UpdateSource=<path where the update is downloaded> /INSTANCEID=<Instance ID> /FEATURES=SQLEngine
For more information, you can review the following article about installing Updates from the Command Prompt.
http://technet.microsoft.com/en-us/library/dd638066.aspx
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

JSP PRECOMPILER IS NOT WORKING WITH WEBLOGIC 6.1 SERVICE PACK 5

          When i compile JSPs using JSP PreCompiler in weblogic 6.1
          ( Service Pack 4 ) , compilation is perfect.
          But when i precompile the same JSPs with weblogic 6.1 (Service Pack 5 )
          , i get compilation error.
          Variable Not Found error comes in service pack 5. But the same code works
          well with service pack 4.
          Could anyone help me ?
          [java] C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          NF\classes\jsp_servlet\_secure\__confirmation.java:280: cannot resolve symbol
          [java] symbol : variable yesLinkPageText
          [java] location: class jsp_servlet._secure.__confirmation
          [java] htmllink0.setPage(yesLinkPageText); //[ /secure/co
          rmation.jsp; Line: 32]
          [java] ^
          [java] C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          NF\classes\jsp_servlet\_secure\__confirmation.java:378: cannot resolve symbol
          [java] symbol : variable noLinkPageText
          [java] location: class jsp_servlet._secure.__confirmation
          [java] htmllink0.setPage(noLinkPageText); //[ /secure/con
          mation.jsp; Line: 37]
          [java] Error: compilation of jsp file /secure/confirmation.jsp (java file C
          VSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WEB-INF\classes
          p_servlet\_secure\__confirmation.java failed):
          [java] ^
          [java] null
          [java] 2 errors
          [java] Error: [jspc]: 1 file(s) failed:
          [java] /secure/confirmation.jsp
          [java] java.io.IOException: Compiler failed executable.exec(java.lang.String


Can you post the jsp page or a example which doesnt compile in sp5. It seems
          difficult to guage what the problem could be from looking at the error.
          --Nagesh
          "george vargeese" <[email protected]> wrote in message
          news:40c56502$1@mktnews1...
          >
          > When i compile JSPs using JSP PreCompiler in weblogic 6.1
          > ( Service Pack 4 ) , compilation is perfect.
          >
          > But when i precompile the same JSPs with weblogic 6.1 (Service Pack
          5 )
          > , i get compilation error.
          >
          > Variable Not Found error comes in service pack 5. But the same code
          works
          > well with service pack 4.
          >
          > Could anyone help me ?
          >
          >
          > [java]
          C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          > NF\classes\jsp_servlet\_secure\__confirmation.java:280: cannot resolve
          symbol
          >
          > [java] symbol : variable yesLinkPageText
          > [java] location: class jsp_servlet._secure.__confirmation
          > [java] htmllink0.setPage(yesLinkPageText); //[
          /secure/co
          > rmation.jsp; Line: 32]
          > [java] ^
          > [java]
          C:\CVSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WE
          > NF\classes\jsp_servlet\_secure\__confirmation.java:378: cannot resolve
          symbol
          >
          > [java] symbol : variable noLinkPageText
          > [java] location: class jsp_servlet._secure.__confirmation
          > [java] htmllink0.setPage(noLinkPageText); //[
          /secure/con
          > mation.jsp; Line: 37]
          > [java] Error: compilation of jsp file /secure/confirmation.jsp (java
          file C
          >
          VSMessageRouter\platform-apps\2notify\webapp\consoleapp\.\web\WEB-INF\classe
          s
          > p_servlet\_secure\__confirmation.java failed):
          > [java] ^
          > [java] null
          > [java] 2 errors
          > [java] Error: [jspc]: 1 file(s) failed:
          > [java] /secure/confirmation.jsp
          > [java] java.io.IOException: Compiler failed
          executable.exec(java.lang.String
          >
          >

ODAC driver 11.2.0.2.1 compatible with windows xp profession service pack 3

Dear all, I am looking at the online system requirement for ODAC driver 11.2.0.2.1 and bascially it says it is compatible with windows xp, but it doesnt specific whether it is compatible with windows xp service 3. Can we assume it is equally compatible with windows xp professional service pack 3.
Thank you

user13328581 wrote:
Dear all, I am looking at the online system requirement for ODAC driver 11.2.0.2.1 and bascially it says it is compatible with windows xp, but it doesnt specific whether it is compatible with windows xp service 3. Can we assume it is equally compatible with windows xp professional service pack 3.
Yes, you can assume that

Cannot download iTunes to PC with Windows XP and service pack 3. When I hit "download" it goes straight to the thank you screen but does not download anything!

Cannot download iTunes to PC with Windows XP and service pack 3. When I hit "download now" it goes stright to the "thanks for downloading" screen but downloads nothing.

I can't answer that. I'm just a user. Apple makes it decisions and does not share that with anyone here as you well know. Apple has also stopped supporting syncing contacts and calendar with the latest version of OS X, Mavericks. Users have to use iCloud. Many are not happy about that. Let Apple know how you feel here: www.apple.com/feedback and click on the appropriate link.

Having problems downloading itunes 10.5.2; box states windows installer issue. I have a 2005 with windows XP and service pack 2. Any ideas?

Just bought a new ipod touch for my daughter. It won't sync without itunes 10.5.2 loaded on our computer (a 2005 HP with Windows XP and service pack 2.) When I've tried to load 10.5.2, I get an error message box stating there is a problem with my Windows installer. I've tried loading the windows installer hot fix KB942288-v3-x86, but it didn't help. Any suggestion?

Hi Lorheak,
thanks for the quick reply. I had the same idea already yesterday. I use Norton Internet Security for a long time now without any problems. I think this a Apple or Microsoft problem, because the popup window which appear come from Windows DEP. I got no message from the firewall with any problem. I check the log files from Norton and Windows already but find nothing. This is a very strange problem. In the past I have had a lot of other problems with iTunes upgrades. Everytime I accept the installation of the newest version I got errors regarding missing "msi" files.
Greetings Gert

Installed Windows 7 64 bit in Error - Can I replace with 32 bit Version?

Hello, last night I installed Windows 7 via bootcamp on my 20" iMac. All went well until I tried to install the Boot Camp support software and had a message saying that Boot Camp 64 bit is not supported on this machine. I did think for a while that I was stuck in my new Windows partition without a way of getting back to OSX as I hadn't been able to install the Boot Camp software but luckily this morning when holding the relevant key on the keyboard during start up I had the option of selecting my mac HD (phew!).
My question is what is the best workaround for this? Can I boot in to the Windows partition and install the 32 bit version over the 64 bit version or should I delete my new partition and start again from scratch? The 64 bit version didn't seem completely stable (there was no sound and the screen resolution didn't seem quite right) but I did have a multitude of updates waiting to install. Thanks for any help.

Boot from 32-bit version and do a clean install.
You can even begin while in Windows.
But before you do that, copy the contents of your OS X DVD's Boot Camp to a folder.
Find the file BOOTCAMP64.msi
Run as administrator and use "troubleshoot compatibility mode" via control + click.
Then that should run.
At least give it a try. I was/am in same boat (unsupported, does not support 64-bit version) like MANY others. And it does work. Otherwise I would be stuck with only using 1.9GB RAM and other limitations.

How can I install the 32-bit version of Lightroom 4.4 on my 64-bit Windows 7 system?

I need to install the 32-bit version of LR 4.4 on my 64-bit Windows 7 system because, for some reason, LR 64-bit is not compatible with something in my computer system.
How can I make this happen?
Thanks,
Mary

The first stage of the installation process for a download is to extract all the installation files into an "Adobe" folder. Go find that folder and look inside, and down at the bottom level of the folder hierarchy are two files: Setup32.exe and Setup64.exe. So uninstall the 64bit version and double-click on "Setup32.exe" to install the 32 bit version.
BTW, what problems are you having with the 64 bit version?

Can't install with 64 bit XP, service pack 2

Similar Messages

Maybe you are looking for