Can't install Zen 3.2 sp3 on a NW5.1 sp7 Tree!!!

I was never able to install 3.2 sp2 under NW5.1 sp5, so I hoped by going to
sp7 and then finding the new Zen 3.2 sp3 I would actually get this **** sp
installed. But no, yet again I get the message at the Tree screen saying:-
ZfD 3.2 (ZENworks for Desktops 3.2) has not been installed on the selected
tree.
This support Pack must be installed on a tree that has ZENworks for Desktops
3.2 installed.
Please choose a tree that has ZENworks for Desktops 3.2 installed.
I followed the instructions as before but no difference. I shut down java, I
ran the install on a clean PC with no Consoleone installed, I removed the
Novell folder from the common files folder. I even installed the latest
client just for the install and it still gets stuck. Any ideas?
Thanks.

How do you run a 'custom install' of sp2?
Thanks.
<[email protected]> wrote in message
news:NUUwc.7866$[email protected]..
> "Jason" <[email protected]> schreef in bericht
> news:g_1wc.6375$[email protected]..
> > I was never able to install 3.2 sp2 under NW5.1 sp5, so I hoped by going
> to
> > sp7 and then finding the new Zen 3.2 sp3 I would actually get this ****
sp
> > installed. But no, yet again I get the message at the Tree screen
saying:-
> >
> > ZfD 3.2 (ZENworks for Desktops 3.2) has not been installed on the
selected
> > tree.
> > This support Pack must be installed on a tree that has ZENworks for
> Desktops
> > 3.2 installed.
>
> Try a custom install of ZfD 3.2, and select only the Schema Extensions to
be
> installed. I think the SP is looking at these to determine if ZfD is
> installed in your tree.
>
> Arjan
>
>

Similar Messages

  • Can´t install ZEN 8 GB on Win-XP-

    Hello,
    I can't install my ZEN on the PC. If I have installed the software from the CD, I have to connect the ZEN with the PC. The automatc Hardware-Installation begins, but then I got this message: Hardware Installation failed. During Installation is a mystake. A Serviceinstallationpart in this INF-File is bad.
    Or in german:
    W hrend der Ger teinstallation ist ein Fehler aufgetreten.
    Ein Dienstinstallationsabschnitt dieser INF-Datei ist ung ltig.
    What can I do? This message I see on 3 different PCs!
    With greetings
    Profi58

    Hi Kok Choy,
    thank you for your answer. I've installed the Microsoft-USB-Beta-Driver, and than I could install the ZEN without a problem. I'm very glad! Installing of ZEN Media Explorer, Sync Manager and so on has gone without problems. Now I'm searching for a manual in german language as a PDF-File. Unfortunally I found only Help-Files.
    With greetings
    Profi58

  • HELP. can't install zen mic

    I bought a zen micro a few months ago and had no trouble installing it.
    then i accidently uninstalled it, and had to reinstall it. when i connect it to the computer it says "Found New Hardware - Creative Zen Micro" and instructs me to insert the CD. i do, but it says that it can't find the software.
    i have also tried just putting in the cd and reinstalling everything, but Real Player still won't detect it.
    Please Help.

    well... i dont know about your setup... but the zen micro is automatically detected when you have playsforsure firmware installed. The playsforsure firmware is designed to work specifically with windows media player 0... I don't know about realplayer... but if you were using it with realplayer previously... then that might be a valid setup. I don't know why it won't detect your micro after the installation and reinstallation...

  • Can't install zen micro on vi

    It says that there is a nati've driver but vista can't find and i don't which one to choose do any of youns know how to?

    Hi Kok Choy,
    thank you for your answer. I've installed the Microsoft-USB-Beta-Driver, and than I could install the ZEN without a problem. I'm very glad! Installing of ZEN Media Explorer, Sync Manager and so on has gone without problems. Now I'm searching for a manual in german language as a PDF-File. Unfortunally I found only Help-Files.
    With greetings
    Profi58

  • Can't install AIR on XP SP3.

    As soon as I try to run it in installastion, it gives me an error and closes. I'm not sure if there's anything I need enabled or change. There's only one account on this computer, so, of course, I'm the administrator. Other than that, I don't know why it just closes.
    Can anyone help? If you need me to post something, tell me how to find it and I will.
    Thanks!

    Great news I was finally able to resolve my problem...It was related to an older version of Adobe Air still being installed on the system under (All users).
    Here is a step by step fix that I used to get the Air Player installed.
    Step 1. Download the Windows Installer Cleanup utility here: http://www.softpedia.com/progDownload/Windows-Installer-CleanUp-Utility-Download-18442.htm l
    Step2. Install the program from step one.
    Step3. You will need to run the cleanup utility program by doing the following:
    Step4.Go to Start=>All Programs=>Then find Windows Install Cleanup ...Double click the icon to launch the utility program.
    You should see this window open:
    Step5. When the window opens...look for a file named Adobe Air [1.?.?] as the version. (Mine has the new version installed so you can see it at the very top entry.
    Step6. If you see Adobe Air listed with a previous version...select it and the remove button will become active. Click Remove.
    Step7. The utility will remove all the previous version of Adobe Air.
    Step8. Grab the latest version of the Adobe Air runtime and Install it. In my case, the new version of Adobe Air installed right away with no problems.
    Summary: I think that my mistake was assuming that the installation of the windows cleanup utility was the actual cleanup process. It's not...you have to install the utility and then go to Step3 and actually run the utility after you have selected the outdated version of the Adobe Air.
    Hope this helps...Kerry

  • Can i install oracle BI enterprise edition on windows xp sp3?

    hi, i downloaded oracle BIEE 10.1.3.4 for windows x86, can i install it on windows xp sp3. must it be on a server operating system?
    thanks

    Read the "System Requirements and Supported Platforms" document:
    http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_1.htm

  • Can't Install Adobe Air on Windows XP SP3

    Every time I attempt to Run the AbodeAIRInstaller, it gives me an error, saying that it has encountered a problem and needs to close.
    I have SP3, and am the administrator since this is the only account on the computer.
    I'm not sure if there's anything I need to do prior to downloading this. This is the first time I've attempted to download AIR. I have all other free products but this one.
    Performed all the troubleshooting steps like Uninstalling through Windows Installer Clean Up Utility , again getting the same error on installing.
    When I right-clicked the installer for Adobe AIR, I noticed there was an "unblock" option at the bottom that most newly downloaded i
    tems have to "protect" your computer. After clicking unblock, I can't even "run" the program. As soon as I double-click the installe
    r, it gives the Windows Error (crash) saying that the program needs to close and I can Send or Don't Send the error report. Before u
    nblocking, I was able to actually press "Run" or "Cancel".
    I have absolutely no idea why I can't install Adobe Air, of all programs... If there's a possible conflicting program, or if I need
    to have all current Windows updates (I haven't updated in a long time, but it's all security things, so I don't think that matters),
    or if I need the Flex program for you to troubleshoot, I'll do it. This whole thing is just really frustrating me.

    I hear ya. that's on an existing system with an upgrade. i've solved (well, resolved) a remote desktop problem with a rollback to sp2.
    but on the clean xp pro sp3 system (1st app install after anti-virus and firewall), the cs3 install took about 10 minutes. very fast very smooth.

  • Can't install Photoshop CS3 on Windows XP SP3

    Hello, I recently have reformated my machine and installed XP SP3
    sadly now, I can't install Photoshop CS3, when I double-click on Setup.exe, it show me a small bar/dialog which tells me it's extracting files, but after that, NOTHING HAPPENS
    I left it for an hour, and again, nothing happens. I checked my Task Manager and I found that Setup.exe and Msiexec.exe are running but with completely 0% of system resource.
    I tried everything possible, nothing worked for me, I really need Photoshop CS3 for my work.
    thanks advance
    JohnX

    I hear ya. that's on an existing system with an upgrade. i've solved (well, resolved) a remote desktop problem with a rollback to sp2.
    but on the clean xp pro sp3 system (1st app install after anti-virus and firewall), the cs3 install took about 10 minutes. very fast very smooth.

  • Which version of Windows XP (SP1, SP2, SP3?) can I install on Mac Pro 2011 using Boot camp

    I am planning to install Microsoft XP on my Mac Pro 2011 using boot-camp. Since there are multiple versions available (Home, Professional, Pro with SP1, SP2, and SP3's etc…) I am finding hard to decide which one is the tested and best available option?
    Also any other specific features to consider while purchasing this OS.
    Please advise…

    Gurleen80 wrote:
    Thank you guys for your quick response.
    However, I am not clear what you guys wanna say here, I simply want to know Which windows XP can I install on Macbook Pro (Laptop) using boot camp?
    I will repeat what I already said given that you told us that you are running Lion on a newer MacBook Pro.
    You should visit the Boot Camp forum https://discussions.apple.com/community/windows_software/boot_camp
    And you should read the Boot Camp Help documents http://www.apple.com/support/bootcamp/
    XP, regardless of version, is not going to work on a newer computer nor will it work if you are running Lion OS.

  • Can't install TCS4 on two different XP SP3 systems

    I can't install the TCS4 trial version on two different XP SP3 systems. Adobe has no solution to this problem. The Installer says "System Requirements" as error message after selection of the different applications. Then I get the link to the Adobe TCS homepage. Any idea?
    Thanks in advance
    Martin Kellner

    Have you read my sentence "Adobe has no solution to this problem" ? ;-) I'm in contact with Adobe. I have an open support issue since the 8th Feb.

  • Can not installed the Sound card driver for Windows XP SP3?(CQ40 333TU)

    my notebook model is CQ40 333TU, i downgraded from windows vista to windows xp sp3, but i can not installed the sound driver?  and i can not found the xp driver in hp web, help me.

    This might help>>>
    http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=26
    http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=230
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Can't install Acrobat 9 Pro on Windows XP Home Ed V2002 SP3

    Newbie hozer can't install Acrobat 9 Pro on Windows XP Home Ed V2002 SP4.  At end of install via CD it hangs restarting Print Spooler (spooler) and Windows Image Acquisition (stisvc) services, err 1920, and all I can do is click Cancel and it uninstalls the whole dad gum thing.  I tried kb.adobe.com/cps/403/kb403613.html.  Not fixing it.
    If I could change the permissions on those services maybe that would help but I can't do it, I don't have a login with enough permissions, I guess...
    So after the third time I just hard-crashed the hard drive when it got to the last ("can't start Windows Image Acquisition", cancel/retry) window and I did end up with the files on the HDD but... they won't install or delete now.  I'm infested.  Try to install in Normal or Vega mode, it now pops up a filled in userid/serial number box, and when you click ok or retype it, it says the s/n is invalid.  I keep having to reboot to get Windows Installer to let me start it (another permissions problem).  So I'm stuck. UpToDateTrendMicro doesn't find any evil doers...  the kb403613 sent me to this forum,
    with hopes,
    M3/   [that's MEL, or as close as the ScreenNameBouncer would let me get]

    Not sure it will help, but try it when logged in as the administrator and with anti-virus turned off. As far as error numbers, must of us have no clue (there seems to be a list at Adobe, but we don't work there.

  • Can't install the cd of my Zen microph

    Hello. I can't install the cd of my Creative ZenMicrophoto 8 Go. When I put the cd in my computer, it says that the product isn't compatible with my system. I have Windows 2000 pro. And I very don't find that funny because I li've in Quebec and I bought it in Montreal so I can't have any help. Please help me thanks!!!

    lylnesoccer6,
    The MicroPhoto is a MTP device and thus the requirements state Windows XP and above. However, it should also have shipped with a "Easy Start CD" which should give you very basic function us Windows Media Player 9. The Creative software will only work in Windows XP however as stated in the requirements.
    Daniel

  • Can't install Creative Media Lite - Clash with Windows XP Home SP

    Zen Stone GB. Firmware: .6..
    My PC: AMD Athlon 3200+, Windows XP SP3, IE7, Windows Media Player .0.572.5230
    Can't install Creative ZEN Stone Starter Pack ..08.
    When InstalShield runs I get the following message:
    >SetupDLL\SetupDLL.cpp(298)
    PAPP:Creative Media Lite
    PvVENDOR: Creative Technology Limited (www.creative.com)
    PGUID:A99CB37-AEBO-492F-A85A-8A2536D22393
    $9..0.429
    @Windows XP Service Pack 3 (2600) !E 7.0.6000.6640
    Followed by Error Code 5002.
    I've check that my system spec. meets Media Lite requirements and suspect a clash with XP SP3.
    Any suggestions on how to complete the installation of Media Lite will be much appreciated.

    Here's 2 messages from Creative Customer Support. Looks like there may be a clash with SP3 so, 'Come on Guys', let's get it fixed.
    I will be forwarding this to our ASG, and we will be looking more into this matter. And we would probably have a patch released for this issue in the near future. Best Regards,Creative Customer Support ServicesCreative Labs Europe
    I was able to talk to our Advanced Support Group (ASG) regarding this issue. And according to them, that it might be possible that SP3 would be the reason why you are unable to install the Creative ZEN Stone Starter Pack. According to our ASG, that the main difference between SP2 and SP3 is network security feature called Network Access Protection, which scans the integrity of a computer before connecting to a corporate network, which is absolutely useless for end users at home. As being one more security feature in Windows XP, this can possibly cause various problems with multimedia applications.
    Best Regards,Creative Customer Support ServicesCreative Labs Europe

  • Can't install Palm Desktop 4.14, 4.2 or 6.2

    Help!
    I can not install any version of Palm Desktop.  I had a working version of 6.2, but with Palm support, tried to uninstall and reinstall 4.2 (for compatibility reasons).  After several weeks everyone has given up.  I run Windows XP Pro, SP3, am the only user on my computer, have admin rights and do NOT have a handheld.  I only use the desktop for the calendar and address book.  Now I am lost without it.
    I have uninstalled using Add/Remove Programs, deleted Palm and PalmOne folders, deleted every single Palm entry in the registry over and over again.  When I try to reinstall, the install stops after the Finish window, but does not continue to the second step which continues the installation with the hotsync options.  This is where I would tell it to skip.  The Palm.exe and many dlls never get installed on my computer. 
    Obviously, there is something on my computer that is still remaining.  I've seen several posts with the same question, but not an answer that helps.  Any thought would be most appreciated.  Short of reinstalling the operating system and all software.
    TIA.
    Post relates to: None

    I am running CA (Computer Associates) Anti-Virus.  It used to be called eTrust.  Windows Defender is running also.  The case is 51395405621.  It started on one computer but ended up trying to reinstall 4.2 on mine.  I should have left 6.2 on my computer, but didn't.  We were trying to get everyone on the same version because we share the calendar.  Most of us do NOT sync to a handheld. 
    Yesterday, I tried installing in safe mode, but it didn't help.  Here's what I have tried over the past several weeks (in no particular order):  I have uninstalled using Add/Remove programs.  I have deleted every Palm, PalmOne and Palm Desktop folder.  I tried copying the .exe program from another computer.  It tried to start the program but gives and Invalid Configuration error.  I can't remember the exact error, but when I researched it, the information I found had to do with administrator rights.  But I'm the only user on the computer and I have admin. rights.  I also tried installing in safe mode as administrator.
    The closest we came is it tries to start Palm Desktop, but gives the error...Invalid Configuration...  The splash window for Palm Desktop is an old version per the tech.  I didn't look familiar to me, but it was blue and white and the date at the bottom was 2002.  He couldn't figure out where it was coming from.  So there is obviously something left on my computer that we can't get rid of.  Or find.  That is the closest we came to getting the program to start.  The tech downloaded 4.2 and 6.2 from the Palm website thinking our versions might be corrupt.  We ran several utility programs to clean the registry (USBregclean) and another one from Microsoft.  (I can't remember what it did.)  I talked to Microsoft tech support and my Windows Installer is NOT the problem.  It's working fine.  The Palm tech took over my computer, added himself as a user, installed under his login.  He and I have both deleted every single entry for Palm in the registry. This went on for over 2 weeks.  He finally gave up and said there wasn't anything more he could do.
    Right now, it's uninstalled, but there are some entries in the registry relating to Palm QuickInstall.  I would be happy with absolutely any version installed so I can get into my data again.
    Thanks.
    Post relates to: None

Maybe you are looking for