Can't join movies split with HJ Split using chunk joiner

I have a movie that was split into 2 clips using HJ Split. First I tried to use Imovie to join the 2 but only the first clip is highlighted in the list of files (the second is there but the name is muted). Also, I can't open the second clip by itself. Someone suggested using Chunk Joiner to recombine the 2. I downloaded chunkjoiner22.bin, expanded it and tried to open the application but got a message saying it was not supported on my system. Does anyone know if there is a different version or another piece of freeware that will do the trick?
IMac Mac OS X (10.4)
IMac   Mac OS X (10.4)  

That program is probably to old/not compatible for Tiger.
Here's a Java version from the same page where it recommends using Chunk-joiner for the MAC platform.
HJSplit for Java
JAxe is a Java clone of the HJSplit program; it allows you to split a large file into smaller pieces and then join them back into the original file. JAxe is a Java clone of the HJSplit program. Being written in Java, JAxe runs on any platform which supports it, such as Windows, Linux, Mac, Solaris, freeBSD.
Note: It says you gotta have Java Virtual Machine installed & enabled on your Mac.
http://www.geocities.com/JAxe02/
Here's the original page that your friend probably downloaded his PC version of HJ Spilt
http://www.freebyte.com/hjsplit/#hjjoin
Split&Concat
Here's another app that states it works with OS 10.3.9 and higher
http://www.xs4all.nl/~loekjehe/Split&Concat/index.htm
Hope this helps.

Similar Messages

  • I suddenly can't watch .mov files with the QuickTime Player x?

    I suddenly can't watch .mov files with the QuickTime Player x? There is always the message, i should look after new software! Can you help me?

    Handy-dandy cut and paste to the rescue!
    you need to install some other stuff to get the full file functionality back.
    Here's the list.
    Start with QT 7.6.6. - http://support.apple.com/kb/DL923
    Get Perian, and install it. - http://perian.org
    then VLC, - http://videolan.org
    DivX - http://divx.com - and the
    Flip4Mac package from Telestream - http://www.telestream.net/flip4mac/
    A52/AC3 downloader: https://www.macupdate.com/app/mac/21875/a52codec - In this installer package there is an audio A52Codec.component. DO NOT USE IT! Throw it out and use the one that is linked below.
    This is what I've put into my system and so far I've gotten every file to run fine, even my oldest videos.
    These are codecs you should see.
    In System/Library/QuickTime
         AppleIntermediateCodec.component
         AppleMPEG2Codec.component* (*optional if you've bought it)
         DivX Decoder.component
         Flip4Mac WMV Advanced.component
         Flip4Mac WMV Export.component
         Flip4Mac WMV Import.component
    In your Home/Library/QuickTime/
         AC3MovieImport.component (you may or may not want this component, in some instances it causes conflicts. In my system, it doesn't. Who knows why? I don't.)
         Perian.component
    For AC3 sound that is in most .mkv files, you need the A52Codec.component, this is the one you want, here: https://code.google.com/p/subler/downloads/detail?name=A52Codec.component.zip - unzip the file and put the component into the System/Library/Audio/Plug-ins/Components
    Go back to your Perian settings and in the Audio Output button, set it to 'Multi Channel Sound' - Ignore the message Perian puts up and select it.
    By doing a 'Get Info' on your files and where it says 'Open With' - default them to the QuickTime 7 program. Perian no longer will work with QuickTime Player so you must have QT 7.6.6 and set it so it is the default for all the filetypes you use.
    It works perfectly with QT7. So far I've gotten ALL my old videos to play.
    .avi, .mov (with the AC3 sound), .wmv, .flv, .mp4 and .m4v. all run fine as do all the older formats.
    Good luck!
    Deb.

  • IPod touch can't synch .mov files with iTunes.

    My iPod touch can't synch .mov files with iTunes. The error message says that the files were not transfered because they can't be read on my device.  I'm not able to transfer any mp4 files, either.  These are my own short animations, small files (under 2MB). Home sharing is on.  I'm trying to synch with the latest version of iTunes on a Windows 7 64-bit machine.  Thanks.

    See:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos
    Yo may have to use a third-party computer program like HandBrake to convert the format to one compatible withthe iPod

  • How can i create  excel sheet with multiple tabs using utl file?

    how can i create excel sheet with multiple tabs using utl file?
    any one help me?

    Jaggy,
    I gave you the most suitable answer on your own thread yesterday
    Re: How to Generating Excel workbook with multiple worksheets

  • How can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

    how can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

    Hi,
    This is currently not supported by iOS for any devices. Rumour is that iOS 5 will finally add this function, until then I'm afraid you are stuck with the good old cable.
    Jamie

  • How can I  get System dates  with time scheduler using threads

    how can I get System dates with time scheduler using threads.is there any idea to update Date in my application along with system Date automatic updation...

    What the heck are you talking about and whatr has it to do with threads?
    Current time: System.currentTimeMillis. Date instances are not supposed to be updated.

  • I have a Mac Laptop and want to buy an iphone.  Can I sync my iphone with my laptop using outlook 2010

    I have a Macbook about 2 years old.  Want to get an Iphone.  Can I sync the iphone with the Macbook using Outlook 2010. 

    See this previous discussion:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Can't view .mov file with quicktime

    Hello. I need help viewing a .mov file with Quicktime 7.5. It was recorded on a Canon Vixia HV30 camcorder and given to me on a dvd. But when I try to view the .mov file with Quicktime, I can hear the audio but the screen is black. Sometimes, it asks me to continue to the following link:
    http://www.apple.com/quicktime/resources/components.html?os=Windows&ctype=696d64 63&csubtype=69636f64
    I'm not that computer savvy - what is wrong? Any advice would be greatly appreciated. Thanks in advance!

    Sorry. My "then" (above) should have been "they".
    They sent you a data DV containing the "source" from the camera and the HDV codec isn't available on your PC so you can't view the file.
    Ask the authors to convert the file using H.264 Video codec (or others) so your Windows version of QuickTime can play the file.

  • How can I mass move symbols with their motion paths without creating new keyframes?

    I want to move a lot of symbols all at once if they are off centered or just need to be moved around to see differenr styles across the document, but I can't seem to move a lot of the symbols at once, only one at a time slexting their motion paths. It's rather annoying when I have items coming in at different times and have to re line everything up one by one if I want to move things even over by 1 px. Every time I slecect all my symbols and try to move them it just creates a new keyframe that they follow. Is there any tool or certian way to select the symbols and/or thier motion paths and move them without creating new key frames?

    Hi,
    There's no direct way of moving all the symbols/ motion tweens begining at different frames altogether, but the following steps should help you do it -
    1. Select a motion path on stage, goto Properties panel > Options menu (top left corner) and enable - Always show Motion Paths.
    2. Enable - Edit Multiple Frames option in the Timeline.
    3. Adjust the frame-markers in Timeline to show all your symbols, motion paths etc.
    4. Now that you see all your symbols and motion paths together, Select-all and Move them together. Or, use Shift + click to selectively select the Motion paths/objects and move them.
    Let me know if you have any doubts..
    Regards,
    Nipun

  • How can i add movement type with newly created warehouse

    Dear expart
    In my SAP below messgae is showning at the time of pass the
    transaction code :MIGO
    "WM movement type 101 not allowed foe warehouse ABC"- How can i sovle the problem .Plz tell me the SPRO.
    Yeasin

    Hi,
    You can define WM movement type in V_T333:
    SPRO > LE > WM > Activities > Transfers > Define Movement Types - here you have to define WM mvt 101 for your WH ("ABC").
    LE-WM Interface
    SPRO > LE > WM > Interfaces > IM > Define Movement Types - here you can connect WM reference movement type to IM mvt and then WM mvt to WM reference mvt.
    Regards,
    Csaba

  • Can I sync my ipod with multiple computers using home share?

    Once I homeshare all my computers, can I sync my ipod with any of them?  Or do I always have to sync using the same computer.

    What kind of iPod do you have?
    For most iPods you can click Manually manage music on the summary page in iTunes. Check out Apple's document -> Using iPad or iPod with multiple computers.
    WTH.

  • Can a dotnet application talk with unix os using Oracle SOA Suit?

    how can a dotnet application talk with unix operating system using Oracle SOA Suite? I have to automate a process on unix server like create user through dotnet application.. is it possible?
    My dotnet application is used for creating users, granting access on the servers. Some servers are 21C servers and some are legacy servers. In this dotnet application a user make certain request for the rights on those servers e.g. create user, give access rights, change password. This application is treated as user interface and maintaining tool of all this information and later on the basis of that request it generates the job-sheet. This job sheet is forwarded to responsible engineer who further provisions the request manually by going to that specific server in the request. So I want to automate this process that when user put any access or create user request then the moment he puts the request, that request should be provisioned without any human intervention i.e. automatically users must be created or password must be changed. I believe you will get an enough idea about my problem from all above information. So please help me.

    Post your query at "SOA Suite Discussion Forum"
    SOA Suite

  • Can we patch Applications(ADPATCH) with no downtime using physical standby

    Hi ,
    As I know I can user Physical standby database for upgrade database with minimal downtime . Can I use the same with patching Oracle application using adpatch.
    In other words can we patch Application (using Adpatch) with no downtime using physical standby .
    Thanks in advance .
    Best Regards,

    In other words can we patch Application (using Adpatch) with no downtime using physical standby . No.
    Business Continuity for Oracle Applications Release 11i, Database Releases 9i and 10g [ID 216212.1] -- Section 4: Applying an Applications Patch
    Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC [ID 452056.1] -- Procedure 4.4 - E-Business Suite Patch Application
    Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1] -- Section 7: Oracle E-Business Suite Maintenance with Standby Database
    Thanks,
    Hussein

  • Can't sync my iPhone with my iMac using iCloud.

    I have installed Lion (10.7.3) on my iMac.  I have attempted to enable iCloud on my iMac, my iPhone (4S), and new iPad.  I am unable to sync my iMac with my iPhone or my new iPad.  I am able to sync my iPhone with my iPad and vice versa via iCloud.

    you pick one mac, and stick with it.
    when using multiple computers you will be asked if you want to erase because the iphone is meant to be used with one library.

  • HT3775 How can I see MOV files with Quit Time Player on my Macbook?

    I have video cams in my store and htey record in a MOV format and I´m trying to look the recorded videos and I can´t, it says that is not suported. Somebody knows what can I do?

    You can try using MPEG Streamclip (free download) to see if that can handle the format. Check their website for their requirement of the MPEG2 Playback Component which you may or may not have already (please update your profile - you are not running iOS on an MBP). Are they recorded at 30 or 60 frames per second? I believe only Final Cut can deal with 60 fps.

Maybe you are looking for

  • Safari 5 and Hulu

    Safari 5 is unable to play HULU WB TV episodes. Clicking on an episode does nothing.Right clicking and choosing "open in new window" works. Works fine in Firefox. OS 10.6.4 Intel Mac Any ideas?

  • DAQmx : How to Trigger camera and AOTF

    Dear, I have a camera sCMOS and an AOTF that i want to trigger. I have attached the description of the camera acquisition sequence. I want to sent a digital pulse (only one pulse because I want to acquire one picture only) to the camera via the EXT/S

  • Help in group by function

    Hi All very simple one but i just confused by it . i just want to display the rows in group by function . example SQL> select user_full_name,last_login_date,email_address from comit_user group by company_code its giving an error . could some one plea

  • What's best way to load mutilple swfs to the stage?

    I'm trying to load 4 swfs to the stage. Think of an mp3/fm tuner/video player. I'd like to have the playlist, status bard and menu stay seperate swf files. Thanks in advance for your help

  • Language change in existing photoshop installation

    need to change the language from english to german