Can't join tables.query dependency not found "" in EUL

hi ALL,
i created one report in disco 3.1.38 and its' running fine but after storing it in database and then again trying to open it from database it gives me error "can't join tables."name of query folder" dependency not found "" in EUL"
if any one has come across such problem and has solution for it ..please reply back.
thanks in anticipation
manish

Manish,
I have not run into this error before and maybe one of the oracle consultants could answer this better. But I here it goes. I would first try a refresh on the folders that the report in question is using. Is it possible that the under lining tables have changed? Do you have another copy of the same report outside of the database and does it still work?
Christopher

Similar Messages

Cannot join tables .item dependency not found in EUL

cannot join tables.item dependency "a04 currency->b27 exchange rate 1" not found in EUL
I am not able to open a workbook in discoverer in user edition.
It seems I unwittingly deleted a join in the end user layer. I have tried to redo the join but I have not been able to replicate the join required. Is there any way I can work around this join without having to scrap my workbook? Rebuilding the workbook took a long time.
Any suggestions would dig me out of a deep hole

Hey,
I got this Error after our environment was cloned from APPS Production (PRD) instance to Development (DEV). I saved my workbooks that were 'under construction' as *.DIS files as local copies to the network.
After the clone was finished I imported the latest Business Areas back onto DEV, but there was no way I could open my saved local workbooks due to the error "cannot join tables .item dependency not found in EUL".
After some hours of rage, by accident we found out that one of our Functional Consultants was able to open these workbooks! It turned out that when I logged on to APPS under the user_name (from FND_USER) of this person I could indeed open the workbooks and save them to the database after which I could open them again with my own user.
So -in this case- I solved the problem by using a different user to open the workbooks. But who knows next time...
Good luck, you'll need it.

Cannot join tables.item dependency "" not found in the EUL

Hi,
Can anyone help me?
I have recently exported and imported my business area into my (SYS)database but some of the workbooks from (DEV) have produced the message above.
Is there anyway of solving this? I have had to recreate the workbooks but would like to still use the previous database (DEV). Do I need to export and import the current working environment into the old BA.
Also do I need to remove the existing BA before I import it?
regards,
Paul.

It sounds like you are using some sort of reporting tool. Are you using Oracle Reports? Or are you using something else (Crystal Reports, Business Objects, etc)?
Can you capture the SQL that the report generates and try to run that against the database via SQL*Plus?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Discoverer 4.1.33 report fails Item dependency not found in EUL for 1 user

I support Discoverer 4.1.33 installed on number of Windows XP sp3 PCs.
Oracle database on Server is 10g.
We have a number of Discoverer programs/reports that have been running for years.
A particular program sales order report works fine for several users of Discoverer 4.1.33
but for one user the report fails with "Item dependency not found in EUL " error.
I matched the Discoverer settings for that 1 user with the others such as
Disable FanTrap Detection, disk cache and Memory cache big - 40 gig,
connect to standard EULs, and other similar settings. Standard TNSnames.ora.
The report fails on the one user's PC. It is a larger report maybe a thousand lines
but not huge. I uninstalled Discoverer 4.1.33 and legacy Oracle 8.0.6 on users PC.
Re-installed all. Curiously the Discoverer settings did not not go back to default but
stayed as previously set and reports fails.
Question: Is Windows Users profile folders used at all? I didn't think it was.
Why did the Discoverer settings not go back to default?
I cleared and deleted the entire Oracle folder with Discoverer in it!
May be the key to why Discoverer program/report fails.
Any help appreciated,
Edited by: 933518 on May 10, 2012 2:41 PM

Hi,
The reason the report fails with "Item dependency not found in EUL " error is most likely because the user does not have access to one of the business areas in the EUL or user in the database does not have access to a table/view or function used in the EUL. Is the EUL a database or Apps EUL? Check that the user can access all the EUL folders and items that are used in the report.
The users' settings such as fan trap detection are held in the PC registry and so usually not overwritten by a re-install.
Rod West

Item Dependency "" not found in EUL

Hi,
We are migrating from Discoverer 3i to 4i then to 10g. While doing so I get the following error while importing one such workbook.
Item Dependency "" not found in EUL followed by Atempt to open work book failed
I did check all the permissions for the workbook/folder/user but no luck ... ne pointers on what the issue could be
Thanks in Advance

Figured out the reason. It is missing a Function in the calculations. This is a Database Function (sheet--> edit sheet --> calculations --> new --> select functions radio button --> Database). There are functions available here in 3i but not present in the migrated 10g version.
how can i get these functions when i migrate ?

Item Dependency "" not found.

When opening workbooks in Discoverer ver.4.1.37, receive the error Cannot join tables. Item Dependency "" not found.
The two workbooks in question had minimal changes and no new joins were introduced or removed.
However I did notice that it works in the Development environment but not in the Production envioronment.
How can this problem be resolved?
Please reply ASAP...

I have the same message "cannot join tables.item dependency '"' not found in EUL" and havent been able to open a workbook. But I dont know what you are talking about when you mention
a development environment and a production environment
Please give me specific instructions on how to retrieve my workbook???
Very much appreciated
diarmuid
Hi,
It looks like you have exported the EUL in the development environment to the production environment.
When creating the EUL there are a some grants are not given by default.
From the Admin edition you have to give the access to the Business area to the user.
After this you have to share the workbook to the user ( if the user is not the owner of the workbook ).
Also check whether the select privilege on the underlying tables have been given to the user.
Regards.

OBIEE 11g : query log not found

Hi,
I am not able to see the query log in 11g answers manage session throwing error query log not found.
I am using obiee 11g. 11g admin client is installed in local machine and I upload the rpd through enterprise manager. But I can not able to open the rpd in online mode that's why cannot change the query log level=2 (as in obiee 10g) for seeing the query log in Answers. Usually after making changes in 11g rpd, I upload that in server via enterprise manager console.
Can anyone please tell me what should be correct option to see the query log and how I can open the rpd in online mode and how I can set the query log level in obiee 11g????
Please help.
Thanks
Titas

Hi,
Its known bug and it can be done by below methods,
Method1:
If you enabled loglevel for each users wise it may be override with below place also can you confirm both places.
enabled Tools-->Options-->Repository-->
System log level by default will be 0 just try to increase to 2 or 3 and save it.
Method1:
by each report wise enabling loglevel
try putting the below syntax in prefix section of advanced tab.
SET VARIABLE LOGLEVEL=2,DISABLE_CACHE_HIT=1;
It should generate the log with database sql as well.
Method 3:
Create Session variable(LOGLEVEL) with initblock
in your init block --> datasource place put it like below query
select 3 from IW_POSITION
Note:just point any existing physical table from u r RPD.
Then try to save it and test it.
Refer screen
http://bidevata.wordpress.com/2012/03/03/no-log-found-error-in-obiee-11g/
Thanks
Deva
Edited by: Devarasu on Oct 11, 2012 11:44 PM

Table or View Not Found Problem

Hi all,
I am facing a strange problem where-in I am calling a query from a normal SQl window which works but the same in Procedure gives me an error.
User A...This runs this statement
Select * from B.emp which gives results. The same statement when I compile in a procedure it gives an error saying Table or View not Found.
User A has a select on B.Emp where B is the owner of table Emp.
I am not able to get to the solution of the same. Is it apossibility of a synonym conflict? Can someone help in what ways this error can come?
Thanks and Regards,
Kapil Uppal

Hi,
>>Well the error is Table Or View Does not exist
Interesting, what version of Oracle are you using ? As you can see below, the stored procedure does not recognized the privilege that have been granted through a role.
LEGATTI@ORACLE10> create user user1 identified by user1;
User created.
LEGATTI@ORACLE10> create user user2 identified by user2;
User created.
LEGATTI@ORACLE10> grant connect,resource to user1,user2;
Grant succeeded.
LEGATTI@ORACLE10> create table user1.emp (id number);
Table created.
LEGATTI@ORACLE10> create role user1_role_tables;
Role created.
LEGATTI@ORACLE10> grant user1_role_tables to user2;
Grant succeeded.
LEGATTI@ORACLE10> grant select on user1.emp to user1_role_tables;
Grant succeeded.
LEGATTI@ORACLE10> connect user2/user2
Connected.
USER2@ORACLE10> select count(*) from user1.emp;
COUNT(*)
0
USER2@ORACLE10> create or replace procedure my_test_procedure as
2 n_id number;
3 begin
4 select count(*) into n_id from user1.emp;
5 end;
6 /
Warning: Procedure created with compilation errors.
USER2@ORACLE10> show errors
Errors for PROCEDURE MY_TEST_PROCEDURE:
LINE/COL ERROR
4/1 PL/SQL: SQL Statement ignored
4/38 PL/SQL: ORA-01031: insufficient privilegesCheers

Table or view not found

Hello,
Please help me, I´m doing a query over a database table and it gave me the next exception:
java.sql.SQLException: [POL-5130] table or view not found Excepción Interna: java.sql.SQLException: [POL-5130] table or view not found Código de Error: -5130<
I already tried the solucion suggested in the dev guide.

Hi Raj,
could you post the fulll Oracle error Message?
Also, read up on how to grant explicit priviliges to schemas on procedures/views and tables. This may be necessary in order for a dbms_job to function as expected.
http://download.oracle.com/docs/cd/E11882_01/server.112/e10897/users_secure.htm#CHDBDBGI
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_9013.htm#SQLRF01603

Class oracle.xml.sql.query.OracleXMLQuery not found in import

I tried to perform load java using a non-sys user :
loadjava -user user1/passwd -v -o -r Archive.java
but encountered the following error:
Errors in Archive:
ORA-29535: source requires recompilation
Archive:11: Class oracle.xml.sql.query.OracleXMLQuery not found in import.
Info: 1 errors
loadjava: 3 errors
But if I use sys user I don't have any error:
loadjava -user sys/manager -v -o -r Arachive.java
initialization complete
loading : Archive
creating : Archive
resolver :
resolving: Archive
Why is this so?
ANy security setup that I missed?
Thanks in advance.
Note:
my Archive.java file contains:
// Core Java Classes
import java.io.*;
import java.sql.*;
// Oracle Java classes
import oracle.jdbc.*;
import oracle.jdbc.driver.*;
import oracle.xml.sql.query.OracleXMLQuery;
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Azman Diron ([email protected]):
I tried to perform load java using a non-sys user :
loadjava -user user1/passwd -v -o -r Archive.java
but encountered the following error:
Errors in Archive:
ORA-29535: source requires recompilation
Archive:11: Class oracle.xml.sql.query.OracleXMLQuery not found in import.
Info: 1 errors
loadjava: 3 errors
But if I use sys user I don't have any error:
loadjava -user sys/manager -v -o -r Arachive.java
initialization complete
loading : Archive
creating : Archive
resolver :
resolving: Archive
Why is this so?
ANy security setup that I missed?
Thanks in advance.
Note:
my Archive.java file contains:
// Core Java Classes
import java.io.*;
import java.sql.*;
// Oracle Java classes
import oracle.jdbc.*;
import oracle.jdbc.driver.*;
import oracle.xml.sql.query.OracleXMLQuery;
<HR></BLOCKQUOTE>
Managed to solve this problem.
Drop all xml objects owned by sys and user1.
Reload xml objcets for user1 with -force option.
null

PL/SQL Exception for ORA-00942 - Table or view not found?

Hey there!
I want to create an exception my code runs into whenever it tries to select from a table that is not existent (or because of insufficient privileges).
How can I get these ORA-00942 errors and place them into a exception? Except for WHEN OTHERS, that's not concrete enough.
Regards,
Thomas

SQL> DECLARE
2   table_not_found EXCEPTION;
3   PRAGMA EXCEPTION_INIT(table_not_found, -942);
4 BEGIN
5   EXECUTE IMMEDIATE 'SELECT COUNT(*) FROM DUALX';
6 EXCEPTION
7   WHEN table_not_found
8   THEN
9      dbms_output.put_line('Table NOT found');
10 END;
11 /
Table NOT found

PCO Query: tag not found

Hi,
I am writing values to a datablock on a PLC using SAP PCO and OPC as middleware.
It is working for all tags in the datablock except for 2.
This is a screenshot of both tags in the OPC Quick client (I am using Kepware OPC server).
I can read and write the tags from here.
I have created a small test. In the MII workbench I created a PCO Query.
Next I dragged the two tags from the tag browser on the left, to the right.
For both tags I filled in a value.
When I execute the query I get following error messages.
M1 Order Dispatch/OrderQuantityTarget: Tag PoederMagazijn/ATS PLC/M1 Order Dispatch/OrderQuantityTarget not found.
M1 Order Dispatch/OrderQuantityConfirmed: Tag PoederMagazijn/ATS PLC/M1 Order Dispatch/OrderQuantityConfirmed not found.
Any other tags work fine.
Thank you for your time.

Hi Philippe,
I tested a similar tag name in Kepware with the Simulator device as I do not have a Siemens hardware connection at present. I was able to read and write DWord tags without issues on these versions:
Kepware V5.15.585.0
MII 14.0 SP5 Patch 15
PCo 2.305.2141.1051 (Patch 3)
Additional question: What is the Agent Instance Tag Query Cache Mode set for?
Regards, Steve

Can we join table with structure

Hi
i have taken fields from Plaf table and some fields from structures so now i want to join that how can i join.
Is there any option?
regards

Hi,
structure dont have any data base table associated with them so they dont have any data.
that's why we cannot join structure witha table but we can include a structure within any table.
Sytex to include structure in ztable:
fieldname data element.
.include struname
hope it will ans ur query.
Thanks
Rajesh Kumar

Can't delete printer - client-error-not-found

After messing around with the installation of a cups based network printer (via a local Suse server) I came across some strange problems with my printer setup utility. Currently, I can neither delete nor add a printer from the list for the current user. When trying to delete a previously installed network printer I get an error message that the printer could not be removed (client-error-not-found). When trying to add a new printer I won't get an error message, but the printer is not being added to the list anyhow.
I already tried to reset the printing system both with the printer setup utility and with the Printer Setup Repair Tool from Fixamac, both without success.
I have to note that for user root everything works fine!
Any suggestions?
Wolfgang
MacBook Pro Mac OS X (10.4.8)

Well, I succeeded in solving the problem by myself ...
The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

Can't update IPhoto because application not found?

I have had the latest iPhoto until yesterday when I did something dumb? then I couldn't open iPhoto anymore. I did create a new library, but discovered that the version of iPhoto I can now open is only a 2. Whenever I try to update to iPhoto 5 or 6, the screen says "you cannot install iPhoto update on this volume. An eligible iPhoto application was not found in the location / Applications/iPhoto.app" when I try to install it onto the hard drive. I'm an amateur at this and would surely appreciate some help. I don't want to be stuck with a version 2! I would also like to be able to import all my pictures back.

Hi lori,
From the beginning: We just bought this intel two months ago. I believe it came equipped with the latest iLife and therefore the latest iPhoto. The technician at the store booted up everything from our old broken iBook, which had older versions of everything (though I don't think the iPhoto was THAT early of a version.)
Recently, I set up a new user and I tried to copy (drag over) my old photo library from my iBook backup file, because this new user didn't have any pix on its iPhoto. When I tried to do that, I believe the computer asked me some questions, like I'm agreeing to certain terms of iPhoto. I thought this was required process under a new user. I really didn't pay attention to it and just clicked 'agree'. Then I couldn't open iPhoto anymore because it said I had done some changes to iPhoto and needed to reopen with a later version. I read some of your other posts and tried to create a new library, which I succeeded in doing. But now it's version 2. Really strange and frustrating.
I'm assuming that the latest iLife is on my computer already? We don't think our computer came with the CD/DVDs.
I SURE appreciate your help thus far! It's all new to me.

Can't join tables.query dependency not found "" in EUL

Similar Messages

Maybe you are looking for