Can't join wifi after upgrading to mavericks

After I upgraded my MacBook Air's OS from mountain lion to mavericks, I'm not able to join any wifi connection. What should I do for now. Plz help me.

Information from Eric Root
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About

Similar Messages

  • I5 can not connect wifi after upgraded to IOS 6.1.2

    i5 can not connect to my laptop share-wifi after upgraded to IOS 6.1.2, while it's ok before upgrade. How can I solve it?

    FIXED!!!!
    I have iPhone 4s running 6.1.2 Everything worked great before the lovely update. My wifi did the same thing that everyone else's seems to be doing. It would not recognize my home router.
    Evidently, in the update, Apple changed how the "Ask to Join Networks" button operates. Previously, I didn't have to have the button toggled to on, my phone would just automatically lock onto my router. I have fought and fought with this update. I have done several "network settings resets". I have even restored my phone twice. I have tried every crackpot, and not so crackpot, suggestion on these forums and NOTHING has worked. I could go to settings and connect to the router each time I used the phone, but it would only stay connected for a few minutes.
    Today, I toggled the "Ask to Join Networks" button to "on", then opened Safari. My phone then asked if I wanted to join the network, I responded with "join". My phone has been on wifi all day! I left home and came back several hours later, and FINALLY... my phone locks on automatically.
    Go to settings>, Wi-Fi>, toggle "Ask to Join Networks" button to "on". Then click on your router/network in the list.
    I realize that everyone's problems are not the exact problems I had, but maybe this will help some of you having problems.
    Good Luck!

  • Can't log in after upgrading to mavericks

    After upgrading to Mavericks, I at first seemed to lose the 2nd HD (all data), then list the ability to log in
    Help!

    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. In the window that opens, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

  • Can I revert back after upgrading to Mavericks operating system? Can't get my Adobe software to run properly.

    Can I revert back to a previous operating system after upgrading to Mavericks? Since installing Mavericks I can't get my Adobe software to run properly.

    Thanks, for your replies. I've got a late 2012 iMac (2.7 GHz Intel Core i5). I was previously running Snow Leopard - Not sure exactly what version but it was right up to date.
    The Adobe software I'm using is the Creative Cloud. Specifically InDesign cc. Whenever I try to browse folders through the InDesign software the browser window closes before I can do what I need to do. So I cant place images into my InDesign document or save documents properly.
    On the Adobe website it says that they worked with apple to fix any bugs before the Mavericks release but there's lots of complaints on the forums. I've left a bug notification with Adobe but I don't expect that they will be offering any solutions or software updates any time soon.
    I really just want to revert back without too much trouble.

  • App store can't be opened after upgrading to Mavericks

    After I upgraded to Mavericks, the app store was still working but the next day, it can no longer be launched. Tried rebooting but it still does not work

    I Reinstalled mavereicks and worked great for one day... now i am back to how it was... If only my time capsule worked.
    Do we know if this a nown apple issue or is there some software conflicting with this?
    I can´t reinstall every week...

  • Can't Access Safari after upgrading to Mavericks

    I upgraded to Mavericks the other day and since then I have not been able to get on Safari or open any .pdf files. In addition, windows keep popping in asking for passwords that I have never seen before. I need my computer to work! Any suggestions?

    You can spend a lot of time troubleshooting your problems, or you can cut to the chase and re-install Mavericks. Reboot from the Mavericks Recovery Drive by holding down Command+R or the option key when you reboot. Then from the Recovery Drive you can download and install Mavericks (OS X 10.9.10). Hopefully that will restore full functionlity to Safari and PDF files. As to the password requests can you be more specific in what passwords are requested?

  • I can't update iPhoto after upgrading to Mavericks

    I have searched everywhere for my iLife '11 disc and can't find it.  App Store says I must update iPhoto, iMovie etc, but won't accept my Apple id.  Can't talk to apple support without first agreeing to pay $60!!. Can someone tell me what to do next??

    App Store says I must update iPhoto, iMovie etc, but won't accept my Apple id.
    If your versions of iPhoto, etc have been installed using a different AppleID, then you have to ask the person who installed it to authorize the update.
    Or uninstall the current versions and buy the updatetd versions.
    If you are sure, that the versions have been accepted to your current AppleID, there may be aproblem with your AppleID. Sometimes an AppleID will be disabled for use with the AppStore for security reasons. Do you get an error message, that indicates a problem with your AppleID?

  • Can't open iPhoto after upgraded to mavericks

    After I updated to 10.9, the fan of my Macbook Pro keep spinning at high speed.
    Secondly, I cannot open iPhoto which said I need to update the iPhoto to the latest version.
    However, the app store does not have the update when I clicked the update button…
    Now , I cannot use iPhoto… even I re-install it from CD...

    it was the most up-to-date iphoto 11 before I up to 10.9..
    It woundnt open
    so I uninstalled it and re install it from iphoto 11 CD then it direct me to update to the latest version which does not exist in app store..

  • Wifi problem with Mac after upgrade to Mavericks

    I just upgraded to Mavericks but something wrong with my wifi.
    i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
    i tried connect to hotspot with my iphone5s and it works.
    Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
    In conclusion,
    Airport should be fine because my other devices works.
    Mac wifi should be fine too because i can connect using hotspot.
    so why it's not working when i connect Mac to Airport?

    I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
    I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila!  It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
    I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
    I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
    Good luck.

  • After upgrading to Mavericks and iPhoto 9.5 my shared photo streams seem to contain no photos when seen in iPhoto. From iPad the streams are fine. How can I get them to be recognized by iPhoto again?

    After upgrading to Mavericks and iPhoto 9.5 my shared photo streams seem to contain no photos when seen in iPhoto. From iPad the streams are fine. How can I get them to be recognized by iPhoto again?

    Disable Photo Stream in the System/iCloud preference pane
    and in iPhoto's Photo Share preference pane.
    Reboot and reenable both respectively. That should jump start Photo Stream.
    OT

  • How can I restore my card reader after upgrading to Mavericks?

    I have a MacBookPro that is not identifying the SD card reader since installing Mavericks. I have heard that ScanDisk has a patch but I have not been able to download it from their site. I have read that downloading the SandDisk patch on a PC and then transferring it to a Mac will fix the problem. I would sure appreciate some help restoring my Mac after uploading to Mavericks. My firewire drive does not seem to be working either. I cannot use my M-Audio firewire interface for recording and editing in ProTools. This represents a lot of down time and/or a pretty big loss of money for me. Can anybody tell me whether Apple provides support for these types of problems or is it completely up to the user to solve them? I am a relatively new Apple user. I bought the MacBook Pro shortly after they were released, about 2 1/2 years ago. Up to that time I was strictly a Windows user. I am surprised Apple did not seem to go to much, if any trouble to warn me of the difficulty I would have after upgrading to Mavericks. Apple, where are you?

    Launch the Image Capture app in your Applications folder.
    Conenct the card reader.
    Then see if Image Capture recognizes the card unde DEVICES top left side of the Image Capture window.
    BEFORE upgrading from one OS X to the next, check the websites for your third party software and hardware for compatibility.
    Apple is not responsible for third party software and hardware used with your Mac.

  • Can't to connect WiFi after upgrade to 10.7.1

    My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

    My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

  • After upgrading to Mavericks all my pdf's that were on Ibooks in Itunes library disapeared. It said they were moved to the new ibooks for mac app. but nothing is there. Can anyone help

    After upgrading to Mavericks all my pdf's that were on Ibooks in Itunes library disapeared. It said they were moved to the new ibooks for mac app. but nothing is there. Can anyone help

    Well where is your library located now if not in the iTunes folder?  See the links below on what your iTunes folder should look like and put it back together:
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

  • Cannon MP830 can't use the scanner function after upgrading to Mavericks.

    I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks.  Can someone help?

    There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

  • After upgrading to Maverick, I can no longer access iTunes Store.

    Hi,
    After upgrading to Maverick, I can no longer access to iTunes stores. The layout for Mac AppStore also doesn't display properly. Perhaps the most annoying part is when I need to access secure website (even google.com), where I need to authorize the certificate. My current connection is behind proxy, but have no issues on all this issues before upgrading to Maverick. Please assist.

    Hello segordon21,
    Thanks for using Apple Support Communities.
    To move voice memos to your computer please follow the steps from the iOS 8 Help below.
    Move recordings to your computer
    You can sync voice memos with the iTunes library on your computer, then listen to them on your computer or sync them with another iPhone or iPod touch.
    When you delete a synced voice memo from iTunes, it stays on the device where it was recorded, but is deleted from any other iPhone or iPod touch you synced. If you delete a synced voice memo on iPhone, it’s copied back to iPhone the next time you sync with iTunes, but you can’t sync that copy back to iTunes a second time.
    Sync voice memos with iTunes. Connect iPhone to your computer, then in iTunes select iPhone. Select Music at the top of the screen (between Apps and Movies), select Sync Music, select “Include voice memos,” and click Apply.
    Voice memos synced from iPhone to your computer appear in the Music list and in the Voice Memos playlist in iTunes. Voice memos synced from your computer appear in the Voice Memos app on iPhone, but not in the Music app.
    Move recordings to your computer
    Take care,
    Alex H.

Maybe you are looking for

  • How to deploy webservices in weblogic 90

    I am tryiong to find a way to deploy a set of web service endpoints represented by stateless session beans in WL9.0. I know that 9.0 best practice recommendation is using JSR181 and jwsc tool, but for various reasons I cannot use that approach. So, w

  • Re: creative cloud desktop failed to install

    I'm having the same problem on my mac.

  • Delete a Freight condition according to Price condition value

    Hello, we defined a Freight condition category  ZTRA with an access sequence, we set condition records. When we create a sale order ZTRA value comes automaticly. But if header price condition ZR00 is more than 1000 euros we delete manually header Fre

  • WebHelp TOC doesn't refresh in output

    Hi All, I'm using RH8 to generate WebHelp. The vast majority of the content is in a linked FM file. I have configured the TOC by opening the Table of Contents folder, double-clicking WebAppHelp (Default), and using the New TOC Book/Page buttons as ne

  • NSUserDefault for Ints

    I have a high score label in my game that shows, well, the high score. But when the app is closed and reopened, the high score is reset to zero. I tried saving the high score like this: This increases the high score when the player has passed it: -(v