Can't kill a job in Reports Server 9i
i have installed Oracle 9ias release 2 patch 3 under winnt.
i review the current jobs queue of my report server and i have a job started since two day ago. i try to kill that job use a command like this
http://servername/reports/rwservlet/killjobid1281?server=servername
and i recieved the following error
can't kill the job with id 1281REP-50125: Excepción obtenida: org.omg.CORBA.UNKNOWN: minor code: 0 completed: No
anybody can help me? i want to kill this job without have to restart the Report service
time for process identification and pskill I think
Similar Messages
-
Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.
Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh -
Can we have more than one report server ?
Hi ,
We have some products( built on oracle 10G and forms 10G) running and for it to run we have 5 application servers .
The OS is Solaris
Oracle version is 10G R1.
We had till now one dedicated Report server .
But now we need to have more than one report server .
Can we have more than one report server attached at same time and in working condition ?
Kindly advise .
Regards
SHUBHSee Oracle® Application Server High Availability Guide
http://download.oracle.com/docs/cd/B32110_01/core.1013/b32201/toc.htm
Oracle® Application Server Enterprise Deployment Guide
http://download.oracle.com/docs/cd/B32110_01/core.1013/b32125/toc.htm -
How to find the jobs in reports server queue
Hi All,
I am using oracle forms & reports 10g and Oracle application server is 10g.
Here we have 100 reports servers, so using this URL we can able to find a particular report server.
http://dhabiapp1.dof.ae:8080/reports/rwservlet/showjobs?server=auh_1
Is there any possibilities to find all the reports server in a single page.
Thanks & Regards
Srikkanth.MHi ccortez,
Thanks for you reply.
I have executed the command and its listing all the report servers, but my requirement is to list all the reports server with queue. Is there any possibilities from the front end screen to see all the report server in a single screen.
Thanks & Regards
Srikkanth.M -
Request response code 503 when try to view failed jobs on report server
I have application server 11. From enterprise manager I get a list of completed jobs and failed jobs for the report server. When I try to click on failed jobs I get
Error in request response code 503.
I am new to weblogic server and I don't know where to look for this problem.Mike,
how do you access Reports from Forms and can you run a stand-alone Reports from the browser URL (using the Reports Services and the Reports Services servlet rwservlet).
if you can't run a Reports directly then the problem is in teh confoguration itself and you should contact customer support via metalink.oracle.com
Frank -
Hi,
Any budy please help me that how can i kill a background job in BW
Cheers,
KGBhi u can kill job in SM 37 also.
also u can cancel in SM50.also use tis link
How to stop scheduled job in bw.
Hope it solves your query
Thanks,
pathak
Edited by: npathak on Aug 2, 2010 9:09 PM -
Track & log failed jobs on Report Server 9.0.4
Hi
Oracle Reports Services 9.0.4 on Windows
i'm trying to figure out how to log failed jobs , so i can automate it and send it to developers
the problem is , how dose showjobs display the job ids with the ohs logs info
http://localhost:7777/reports/rwservlet/showjobs?
i can collect the job IDs with the "Terminated with error" from the rwserver.trc
but how do i connect these jobs with the actual RDF, pdf entries in the apache log
or maybe logs
for example , so i can track the failed requests with their respective parameters
any ideas ?
thanksthanks desgard
that info is totally great and all , i even found this link that may help others with Notification
http://www.oracle.com/technology/products/reports/apis/plugNotification/NOT_3.html
but i don't want to send a msg for each run & i need to alter the URL format to use this feature in the rwservlet
but that's not what i want , i want to filter the trace log (rwserver.trc) & extract the History of failed jobs for the past month or so
i can get the list of jobs , example
"Job 104870 status is: Terminated with error:"
how can i connect the job IDs with their URL Requests -
Can't create a new SQL Reporting Server
I am trying to create a new reporting server. I was able to create one earlier in the day but it was tied to the wrong subscription (not the one my databases were in).
So I tried to create another one attached to the right subscription and I am unable to I get the following error no matter what I put in for Username/password.
Error Code: InternalServerError; Error Message: Log on failed. Ensure the user name and password are correct. Tracing
ID is: f472bbc5-aa4b-4af8-b12e-72a7746db9f1. Machine name is SQL0ABAA615. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. Ensure the user nam
I removed the bad one and still get the same message. I have tried using the admin account, the account that was used to create the initial server my account (which is an admin account) and also just creating a new login/pwd combination nothing works.
Any ideas or help would be greatly appreciated.
ChuckThanks for your question. Unfortunately we are in the process of deprecating SQL Reporting services. Full details are available at http://msdn.microsoft.com/en-us/library/gg430130.aspx
Thanks Guy -
How can I keep a newly created reports server running?
I have had to create a second reports server under 9ias Rel.2. This server is in addition to the out-of-the-box server installed with 9ias Rel. 2. I created the new server logged on to a Solaris session using the command rwserver.sh server=<new name>. The creation went just fine. I am able to use the new server just fine, EXCEPT if I log off the Solaris session used for the startup of the new server.
I know this sounds similar to the problem of the default server going down if the unix session is logged off. However, I solved that problem by installed XVFB, using a DISPLAY of other than 0, and changing the opmn.xml file. All that works great. But, it does not seem to have an effect on the new reports server I created.
Does anyone have any ideas how to get around this issue for reports servers other than the default?I had similar prob. but with vnc instead of xvfb.(similar product)
I put the startup of vnc in the same script as the start of the rwserver.. it looks like :
export DISPLAY=servername:12.0
vncserver startup
wait 5 secs
set oracle homes etc..
rwserver.sh server=myrepserver
I start this script using the unix nohup command :
nohup startrepserver.sh &
the vnc server starts and the reports server starts..
I use a different port (12, 13,..) for reports/discoverer/forms compilation -
Can I use Reports Server Queue PL/SQL Table API to retrieve past jobs ?
Hi all,
Can I use Reports Server Queue PL/SQL Table API to retrieve past jobs using WEB.SHOW_DOCUMENT from Forms ?
I have reviewed note 72531.1 about using this feature and wonder if i can use this metadata to retrieve past jobs submitted by a user.
The idea would be to have a form module that can filter data from the rw_server_queue table, say, base on user running the form, and be able to retrieve past jobs from Report Server Queue. For this, one would query this table and use WEB.SHOW_DOCUMENT.
Is this possible ...?
Regards, Luis ...!Based on that metalink note and the code in the script rw_server.sql, I am pretty sure that by querying the table you would be able accomplish what you want... I have not tested it myself... but it looks that it will work... you have the jobid available from the queue, so you can use web.show_document to retrieve the output previously generated...
ref:
-- Constants for p_status_code and status_code in rw_server_queue table (same as zrcct_jstype)
UNKNOWN CONSTANT NUMBER(2) := 0; -- no such job
ENQUEUED CONSTANT NUMBER(2) := 1; -- job is waiting in queue
OPENING CONSTANT NUMBER(2) := 2; -- opening report
RUNNING CONSTANT NUMBER(2) := 3; -- running report
FINISHED CONSTANT NUMBER(2) := 4; -- job has finished
TERMINATED_W_ERR CONSTANT NUMBER(2) := 5; -- job has terminated with -
Dear all,
I have an envirnment that have Both of the Database (11g) and the Application Server (10gR2) are installed in the same machine. i installed only forms and reports components from the application server and the forms are working well through the web. my problem is that i can't make the in process report server up and runing as it's alwlyes dowen and when i chose it from the web and choose start, the job finished but it still down.
in addition to that i failled to use the comand RWSERVER to create new report server and aloyes the message "Consult the installtion guide for how set up an run this program, so, how can i make the report server up and running as my reports not working.
Thanks,The EM Console is not the best way to find out if your reports server is up and running, I sugest you use the command rwdiag -findall it will show you the reports servers up in your server, as well if you want to create a new reports server, you have to use *$ORACLE_HOME/bin/addnewservertarget.sh new_servername* as well this command will create an entry in opmn.xml in a way that you can check the status of this using opmnctl status command.
Hope this helps.
Greetings.
Edited by: Roberto Barrera on Dec 9, 2009 12:42 PM
As Paul Mentioned! -
Report server run problem (urgent plz)
i am using developer9i, xp opereting system but i am not able to run report server . infact i dont know where report server reside and how configure report server. otn discussion forum gave me below instructions but i need step by step detail to run report server.
pls help me.
i want to see (Please reffer to Note:204538.1 on
Metalink ) but i could not access metalink.
registration does not alow me. i have no country on
country list and no Support Identifier (CSI, SAC,
Access Code etc.) . but i need access.
please help me. access with path
thanks
mostafizDear see this information this is metalink information
Note:204538.1
Subject: Common Reasons & Troubleshooting: "Unable to communicate with the Reports Server"
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 22-JUL-2002
Last Revision Date: 08-MAR-2005
PURPOSE
========
The main purpose of this document is to list the known causes of the "Unable to
communicate with the Reports Server" error. The terms Reports Server, CGI,
Reports Servlet are also described briefly for a better explanation of this error scenario.
This document includes the following sections :
I. Brief summary on the architecture of Reports Server, CGI and Reports
Servlet
II. Sources of errors encountered when running a report with Reports Server
III. How the CGI (or the Reports Servlet) communicates with the Reports
Server
IV. Possible reasons which lead to "Unable to communicate with the Reports
Server" error.
1) Reports Server is up and running
2) tnsnames.ora and sqlnet.ora problems
3) Effect of parameter "ORACLE_HOME"
4) Effect of parameter "maxconnect"
5) Passing very large parameters to reports server
6) A case specific to OAS 4.0.8.2
7) A case specific to WEBDB version 2.1.0.9.3
V. References
I. Brief summary on the architecture of Reports Server, CGI and Reports Servlet
=================================================================================
In order to understand the causes of the error "Unable to communicate with the
Reports Server", let's first briefly review the Reports Runtime Engines, Reports
Server, the Reports CGI, and Reports Servlet architecture.
There are 4 important layers in Reports Server architecture which should be
understood in order to clearly understand the error "Unable to communicate with
the Reports Server" :
1) The Runtime Engines : This is the main layer where the reports are actually
executed. On unix systems there are "rwrun60" and on NT systems there are
"rwrun60.exe" processes.
2) The Reports Server : The Reports Server recieves the job request and queues
it. When one of its runtime engines becomes available, it sends the
command line to that runtime engine for execution. On Unix systems it is
the "rwmts60" executable and on NT systems it is "rwmts60.exe".
3) The Reports CGI : The Reports Web CGI passes the request to the Reports Server.
The Reports CGI or Servlet converts the request to a command line that can be executed by the Reports Server and
submits it to the specified Reports Server. On Unix platforms this executable
is "rwcgi60" and on NTs it is "rwcgi60.exe.
4) The Reports Servlet : Its functionality and function is just the same as "Reports CGI", but it is
a program written in Java as difference to the CGI program (which is
written in C programming language).
The Reports Server may be running on the same server with the CGI program (or
servlet) OR may reside totally on another machine which does not necessarily have
the same Operating System. For instance CGI may reside in a Windows NT machine
while the Reports server may reside on a Unix box, or any other combination with
Unix-Linux-NT-2000, etc.
The reports are called with a URL similar to below with the CGI :
http://fully.qualified.server.name:PORT/dev60cgi/rwcgi60.exe?server=<REPSERVER>&other_parameters=...........
where fully.qualified.server.name is the name of the server where the Reports CGI
reside, and <REPSERVER> is the name of the server.
II. Sources of errors encountered when running a report with Reports Server
============================================================================
The Reports Web CGI (or the Reports Servlet) makes a call to the Reports Server
and asks it to place the output into some destination (defined by DESTYPE and
DESNAME parameters), then gives back the necessary response to the calling
program. For example if the DESTYPE is "cache", then the Reports server generates
the report to a file in a temporary place and gives it back to CGI and the CGI gives
it back to the calling program. Otherwise, if the DESTYPE is "file", the Reports Server
generates the report output to the requested file and the CGI replies back the
following message : "Report output was successfully written to requested
destination.".
If there is any error in this process, the related error message is returned. The
possible sources of errors can be categorized as follows :
1) The errors that are returned from Reports Server; like the Reports Server can
not find the requested RDF file or the report may be run to file and the
directory where the reports output is asked to be placed does not occur or
similar errors. (Usually the REP-XXXX errors)
2) Another possible cause of error is the errors returned by the RDBMS to the
Reports Server, for example a table not found error or things like that. Of
course from the CGI point of view these errors are again transmitted from the
Reports Server but in fact the error originates from the RDBMS. (Usually the
ORA-XXXX errors)
3) Another possible cause of errors is the CGI itself, for example when the CGI
executable can not connect to the requested Reports Server, then we get the
famous "Unable to communicate with the Reports Server". In this document we will
diagnose the common reasons of this last error.
III. How the CGI (or the Reports Servlet) communicates with the Reports Server
===============================================================================
Having said that "Oracle Reports Server CGI - Unable to communicate with the
Reports Server." error is returned back from the CGI itself, let's discuss the
issue of how the Reports CGI connect to the Reports Server. The name of the
Reports Server given in the URL with "server=....." parameter is, in fact, just
a special tnsnames alias, similar to aliases for database connect strings. As it is
important for the CGI to resolve the alias, the CGI needs to know the HOST name (or the
IP) of the machine where the Reports Server is running and the port on which the
Reports Server is listening. So a typical Reports Server alias is defined as follows :
REP60_<MACHINE>=(ADDRESS = (PROTOCOL = tcp)(HOST = <MACHINE>)(PORT = <PORT>))
This is defined in tnsnames.ora file, and the sqlnet.ora file is also used in
the name resolving operation.
IV. Possible reasons which lead to "Unable to communicate with the Reports Server" error.
==========================================================================================
The possible reasons for the "Unable to communicate with the Reports Server" error :
1) Reports Server is up and running :
Make sure that the Reports Server is really running on the specified server
and listening on the specified port. For details have a look at above
explanations for tnsnames alias of the reports server. And because of this the
CGI could not establish a connection to the Reports Server.
2) tnsnames.ora and sqlnet.ora problems :
As described above, the CGI resolves the details for the reports server using
the "tnsnames.ora" and "sqlnet.ora" files. There may be a problem with them,
here are the possible configuration problems :
a) There is no alias in the tnsnames.ora file for this Reports Server
b) The CGI looks into the wrong directory for the "tnsnames.ora" and "sqlnet.ora"
files. By default the CGI checks the $ORACLE_HOME/net80/admin directory for
these scripts, where the $ORACLE_HOME is the home of the Forms & Reports
installation. Please note that in a typical 9iAS 1.0.X installation there
are two ORACLE_HOME's, one is for the iAS and the other is for the tools,
usually the home for the tools is a directory with name "806" on NT and
"6iserver" on unix systems. By defining TNS_ADMIN in the environment, one
can override the search path for these two files.
The TNS_ADMIN variable can be defined in one of the following places :
i) In the environment : On MS Windows platforms check the "Settings
--> Control Panel --> System". On NTs check the environment TAB and in
Win2K systems check the "Environment Variables" button on Advanced tab.
ii) In "6iserver.conf" file. Details are as follows : The main configuration
file for Apache server is "httpd.conf" file which resides in
$IAS_HOME/Apache/Apache/conf directory. In this file there is a line to
include "oracle_apache.conf" and in this "oracle_apache.conf" file
there is a line to include "$ORACLE_HOME/conf/6iserver.conf" file. And
in this file the TNS_ADMIN variable could be defined as follows :
SetEnvIf Request_URI "rwcgi60" TNS_ADMIN=c:\orant\network\ADMIN
Please note that by defining it this way, the TNS_ADMIN will only be defined
for "rwcgi60" calls, so the other parts of the 9iAS will not be affected by
this setting.
c) In sqlnet.ora the "names.default_domain" is set but in tnsnames.ora the
domain is not defined in the alias description. For example if the
"names.default_domain=world" is present and active in "sqlnet.ora" file
then in the "tnsnames.ora" the alias of the reports server should also have
the ".world" extension appended at the end. And another cause is of course
the vice versa for this. If there is no "names.default_domain" is defined
in the "sqlnet.ora" then the alias in "tnsnames.ora" should not have the
domain extension.
Another important point that should be checked is, if TNS_ADMIN is defined
as described above then the search path is as follows, first the directory
defined by TNS_ADMIN is searched, if the "tnsnames.ora" file is not found in
this directory then $ORACLE_HOME/net80/admin is checked. (And on unix systems
/var/opt/oracle is also checked). These directories are only checked if the file
is not present, so if the "tnsnames.ora" file is present in TNS_ADMIN directory
but the alias is not present, then the other directories are not checked at all.
Let us assume that the tnsnames.ora file is present in the TNS_ADMIN directory but
there is no "sqlnet.ora" files here, then the sqlnet.ora file is checked in
$ORACLE_HOME/net80/admin directory, which could cause the same problem if the
"names.default_domain" is defined in this file.
All the above will result in, CGI to unable to resolve the alias in tnsnames.ora
file so it will not be able to establish a connection to the Reports Server.
3) Wrong "ORACLE_HOME" setting :
Wrong ORACLE_HOME setting. This is usually the case for Reports Servlet,
because the environment settings are defined in "jserv.properties" file for the
servlets and the setting here will effect both the Reports Servlet and the
setting for Oracle JSP and other servlets. So the other servlets or Oracle JSP
may need to set ORACLE_HOME to home of HTTP server while the reports server needs
it to be set to the TOOLS_HOME directory. In this case the best alternative is
not to set ORACLE_HOME in this directory and leave it to registry or defined the
ORACLE_HOME in "6iserver.conf" file just like the TNS_ADMIN defined above. For
details please have a look at the following document :
Note 179609.1 "Getting an error Unable to communicate with the Reports Server
using RWSERVLET"
4) Effect of parameter "maxconnect" :
Another common case for this error is that the CGI request reaches the Reports Server but
the Reports Server refuses connection. The main cause for this case is, that the Reports Server
configuration parameter "maxconnect" is defined too low, there are long running reports on the
server or the server is too busy at that time. Usually a second try some
later time results in a successful connection. If this is the case, the end user
may think that the problem is occasional. For details on this case please
have a look at the following document :
Note 125265.1 "Unable to communicate with the Reports Server"
5) Passing very large parameters to reports server :
Another known reason for this error is, if you are passing large parameters
to the Reports Server which exceeds sqlnet transmission blocks then the request may
end up with this error. To test it try with small parameter values. If you hit
this case, the solution is to increase the SDU (Session data unit size) and the TDU
(Transport unit data size) parameters in tnsnames.ora file, for details please
have a look at the following document :
Note 197358.1 "Passing large parameters to Reports show up a Reports Server
error"
6) A case specific to OAS 4.0.8.2 :
If you are using OAS instead of iAS, and the error appeared after
upgrading to 4.0.8.2 then this is caused because the 4.0.8.2 is using RSF
(Required Support Files) version 8.1.6 and the Reports 6i is using 8.0.6 and the
two could not reside in the same ORACLE_HOME directory. So the solution for this
problem is to create a new batch file and use it from which the actual CGI
executable is called. For details please see the following document :
Note 116754.1 "After applying OAS 4.0.8.2 CGI and Cartridge cannot communicate
to report server"
7) A case specific to WEBDB version 2.1.0.9.3 :
Another known case for this error is with WEBDB version 2.1.0.9.3 or less.
If you are using these old versions of WEBDB as HTTP listener, please have a
look at the following document :
Note 95426.1 "URL Not Found When Calling Oracle Developer Report from WebDB Site"On Windows you can create a Report Services:
rwserver -install server=repserverYou have to choose different names for all servers, like your collegue cannot create a server with the same name. You can start/stop this Report server in Services (control panel). Configuration files can be found under $ORACLE_HOME/reports/conf
Martin -
Report not run inexplorer and report server not start
sir
i install dev suit 10g and
1. create new form and test that run in explorer
2. create report and test in report builder that run and give right result, but when i test in explorer that not run and no error and report server OC4J not start i try but window appear and hide
please give me idea how run report in explorer
regard
fahimThe normal procedure for the Developer Suite is:
1. Start OC4J instance via Windows Start menu.
2. Run a report:
http://127.0.0.1:8889/reports/rwservlet?module=....
That doesn't work?
Can you see the in-process report server?
http://127.0.0.1:8889/reports/rwservlet/showenv?
Or errors in the job queue?
http://127.0.0.1:8889/reports/rwservlet/showjobs?
(note that your port number may be different) -
Hello,
I've upgraded a Linux server from Weblogic 10.3.2 / Forms 11.1.1.2 to Weblogic 10.3.6 / Forms 11.1.1.6 and I have some problems with reports server.
I can't use jobStatusRepository on my reports server.
I've created a new one, and when I activate the Job Status Repository, server can't start.
I've added this features from Enterprise Manager and I've build a new credential (I first have tried to redefine old ones).
When I modify my rwserver.conf adding comments to jobStatusRepository section, my report server start (from opmnctl or from Enterprise Manager) but as soon I put on line the jobStatusRepository, it fails to start.
My server is an Oracle Linux 5.
I've done the same on another server (same releases) and it does the same ...
Thanks for any help.
Xavier CabantousHello,
thanks for your reply.
I've put level TRACE:32in traces but there is nothing interesting in log files :
in console~rep11_nodhos~1.log =>
12/06/09 21:02:10 Start process
9 juin 2012 21:02:13 oracle.security.jps.internal.common.util.XmlSchemaValidationUtil$StrictErrorHandler warning
ATTENTION: Echec de la validation du contenu XML. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Emplacement : line 2 column 272.
but I've seen in other topics that we don't have to care to this Warning.
in rwserver_diagnostic.log =>
no errors messages, it ends with
[2012-06-09T21:02:13.483+02:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000JVIc0PeFw000jzwkno1Fotqn000001,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] Multicast:registerReceiver Packet handler registered
[2012-06-09T21:02:13.489+02:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 10] [ecid: 0000JVIc0PeFw000jzwkno1Fotqn000001,0] ServerPacketHandler:start ServerPacketHandler started successfully
I just have opened a SR on MetaLink -
Custom Paper Size : Migrating from 6i to 10g report server engine
Hi,
pardon my bad english !!
I'm studying to migrate form/reports 6i to 10G. In report 6i we have reports with custom paper size ("A5" format that is half of "A4", 15x21cm).
In report server 6i environment (Win2000 server) we have done this configuration.
- We configure printer; one input tray has "custom" format.
- We create an OS user (es. CustRep);this user has a "default printer" that has input tray with "custom" format as default tray.
- We create a new report server (es. CustRepSrv); this report server start as service with CustRep user credentials.
- Every report (PDF format) generated and printed (destype=printer,desname="My Printer") with CustRepSrv report server get custom format as paper size and so fit with Custom tray definition on the printer.
Can I do the same in report server 10G environment ??
Thanks
AndreaUsing these and not hearing much bad
Init Engine 1
Max Engine 6
Min Engine 0
Eng Life 10
MaxIdle 30
Trace Error
Trace Replace
I set my Report Server Parameters
CACHE SIZE - 700
CACHE DIRECTORY = (you have to decide)
IDLE timeout 120
Max Connections 120
Max Queue Size 4000
trace options = trace_err
trace mode trace_replace
Maybe you are looking for
-
Hi, when i am firing below mentioned query it takes more than an hour,but when i put inner join instead of left outer join it fetches immediately can someone explain me what this query says why it is taking some much time thanks SELECT TOTAL.product_
-
How to convert julian Date into Calendar Date
Hi, I want convert julian Date to calendar Date (mm/dd/yyyy or mm/dd/yy format) in java. Can any one help me how to convert julian date to calendar Date. Thanks, Krishore.
-
Is Bluetooth really standard?
I have a wireless stereo headset (Motorola) that worked great with my iPhone 4 but won't connect to my iPhone 5. I recently bought an inexpensive "in ear" wireless device (Plantronics) that works great and even allows me to listen to music and use Si
-
Can't locate my serial numbers!
I just had my Macbook Pro repaired by Apple and now that I got it back, I have to input the serial numbers for many of programs again. For some odd reason I cannot locate my FCP 7 (Final Cut Studio) serial numbers! I checked my install discs and othe
-
I am using this code to make a screen saver that fades an image in then fades to another image. I would like to be able to set those images to full screen in case they are to large or to small for the current screen resolution. Any suggestions? Thank