Can't label files in bridge, and problem with starred files

I'm working with CS3 on saving raw files to jpegs, and I usually organize them by 5 starring my favorites as well as labeling them, and just in the last 2 days Bridge has been acting up and won't label the files. Also, it will 5 star them, but only about a 1/4 of them show up in the filter as being starred. Any ideas? I already checked my access, and I can read and write to them.... the only thing I can think of is that I ran a few updates a day or two ago.... help! this is getting really frustrating and slowing down my workflow...

http://forums.adobe.com/community/bridge/bridge_macintosh

Similar Messages

SFTP MGET of large files fails - connection closed - problem with spool file

I have a new SFTP job to get files from an FTP Server. The files are large (80mg, 150mg). I can get smaller files from the ftp site with no issue, but when attempting the larger files the job completes abnormally after 2 min 1 sec. each time. I can see the file is created on our local file system with 0 bytes, then when the FTP job fails, the 0 byte file is deleted.
Is there a limit to how large an ftp file can be in Tidal? How long an ftp job can run?
The error in the job audit is Problem with spool file for job XXXX_SFTPGet and an exit code of 127 (whatever that is).
In the log, the error is that the connection was closed. I have checked with the ftp host and their logs show that we are disconnecting unexpectedly also.
Below is an excerpt from the log
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.055 : Send : Name=SSH_FXP_STAT,Type=17,RequestID=12
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.055 : Transmit 44 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.055 : Remote window size decreased to 130808
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.071 : RepeatCallback received 84 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.071 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.071 : Received message (type=105,len=37)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.071 : AddMessage(12) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Reply : Name=SSH_FXP_ATTRS,Type=105,RequestID=12
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Send : Name=SSH_FXP_OPEN,Type=3,RequestID=13
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.071 : Transmit 56 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.071 : Remote window size decreased to 130752
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.087 : RepeatCallback received 52 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.087 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.087 : Received message (type=102,len=10)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.087 : AddMessage(13) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Reply : Name=SSH_FXP_HANDLE,Type=102,RequestID=13
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Send : Name=SSH_FXP_READ,Type=5,RequestID=14
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.087 : Transmit 26 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.087 : Remote window size decreased to 130726
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.118 : RepeatCallback received 0 bytes
DEBUG [SFTPChannelReceiver] 6 Feb 2015 14:17:33.118 : Connection closed: (code=0)
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : Disconnected unexpectedly ( [errorcode=0])
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : EnterpriseDT.Net.Ftp.Ssh.SFTPException: [errorcode=0]
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.CheckState()
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.GetMessage(Int32 requestId)

I believe there is a limitation on FTP and what you are seeing is a timeout built into the 3rd party application that tidal uses (I feel like it was hardcoded and it would be a big deal to change but this was before Cisco purchased tidal) there may have been a tagent.ini setting that tweaks that but I can't find any details.
We wound up purchasing our own FTP software (ipswitch MOVEit Central & DMZ) because we also had the need to host as well as Get/Put to other FTP sites. It now does all our FTP and internal file delivery activity (we use it's api and call from tidal if we need to trigger inside a workflow)

IPod shuffle and problem with Audible files

I just fought for about 8 hours with my new Shuffle because it would not play my Audible files even though I read everything available about how to do it correctly and I updated/reset/upgraded/reinstalled/redid everything repeatedly and was about to send it back for an exchange.
Whenever I tried to play an Audible file, the Shuffle would just die and then the (newly charged) battery would instantly drain to nothing and I'd have to recharge it before trying it all again. (I was NOT trying to play the files in shuffle mode, and I was NOT trying to play Audible type 1 files, so this was not the problem. Also, the Audible files played just fine in iTunes.)
The problem was that I had downloaded the audiobook files from Audible when I bought them, and then had stored them on a CD. Then, when it was time to put the files on the Shuffle, I just pulled them off the CD back into iTunes. I did this, of course, because I didn't want those large audiobook files stored on my hard drive.
I eventually tried downloading FRESH FILES from Audible, instead of using the files I had stored on CD. The Shuffle was able to play these FRESH, NEWLY DOWNLOADED FILES from Audible.
Seems like there'd be some mention of this somewhere in all of the troubleshooting guides I've been through. What a pain.

Lawrence,
Why don't you buy the audiobooks from Audible and then archive them until you want to download and listen to them. Then once you've listened you can delete them from your iTunes Library and no hard disk space is needlessly occupied on your machine. And, if you want the book again in the future, just download it again -- the download time is probably considerably less than the time you take burning CDs, plus you save the cost of the CDs, plus the "fresh" downloads work on your Shuffle and the CDs don't.
Roger

N9 and problem with pdf-files

The problem is: I download an pdf file from internet. Filename is containg skandinavian characters which are converted as "%D6 etc." When I try to open the file with N9 I get an error similar to: "file is corrupted, can not open the file". Yet the same file works fine with Nokia C5-00 and with my Macbook laptop. Any idea how to fix this problem?

is the device actually sold in your country of origin, or was it imported.
not that it should really matter, but sometimes could be an issue.
you could also try to rename the file and then try to open it.

CS2, Vista, and problems with raw files

Hello everyone. I have recently installed CS2 with RAW updates 3.6 on my new computer, which happens to have Vista on it. The RAW files I created with my Nikon D80 are not showing in Bridge either as thumbnails or when I click on them to enlarge them.
Does Adobe plan to address this problem through future downloads?
Any suggestions? I may be slow to respond since I will be out of town this weekend.
Thanks!

I've seen some strange things happen with Photoshop Elements on Vista. Some of it worked some didn't.
The security features of Vista are a bit too much at times and I got Elements to work by running the program with Administrator Priviledges.
It might be worth a try. Right click on the desktop icon and select Run as Administrator ( or something similar - I'm not on a Visa PC right now)
Colin

My laptop can't read any cd/dvd and problem with LHS shift key

My laptop (HP Pavilion dv6-2005tx Entertainment Notebook PC) can't read any cd/dvd's when i put them in the drive and also my LHS shift key does not work while pressing it for writing/using capital letters. please help me at the earliest.

Quote from: eftos
In control panel the Primary Ide chanel (the hard-disk) is working in UDMA mode 6, and the secondary Ide chanel (the DVDRW) is working in UDMA mode 4.
When i want to burn any CD or DVD with Nero, Roxio or anything else, i have this nice message :
DMA driver error. CRC error. Burn failled.
Solved !
I change the IDE cable with one of 80 wires.
This is MAGIC !!!
The 80-conductor cable was first defined with the original Ultra DMA modes 0, 1 and 2, covering transfer speeds up to 33.3 MB/s.
The cable is considered "optional" for those modes.
However, for any Ultra DMA modes above mode 2, the 80-conductor cable is mandatory.
cheers

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

[SkyDrive] Files can't be uploaded because there's a problem with a file or folder.

On Windows 8.1 RTM, the SkyDrive metro client shows a message that "Files can't be uploaded because there's a problem with a file or folder." and lists one particular file. When I installed the PC, I have switched then Access all files offline
option to On.
The file resides in a directory I have deleted from the disk. When attempting to get rid of this "problem" (as there are no hints nor UI available) I have manually checked that the directory does not exists on the disk any more, as well as deleting
the directory from cloud storage using a web browser. However, the message is still there.
Restarting the computer several times nor keeping it idle for a significant amount of time did not help.
How to get rid of that "problem" / how to fix it?

Hi
Let’s try to redirect the skydrive folder and sync again to see what’s going on:
1. Open regedit and find following key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\SkyDrive
2. Change “UserFolder” to another location.
3. Open the SkyDrive Metro app to confirm your files and new directory.
Then check the issue again.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem with m3u files and Quicktime

Hello:
I have made one update with Quicktime software (version 7.6.9 1680.9). The problem is that Quicktime player reproduces mp3 files but when I try to play m3u files the sound is very bad. It sounds like gargling.
For example: This files play ok:
http://www.telefonica.net/web2/sevarra/Sarabande.mp3
It plays ok when the previous link is introduced as URL address in Quicktime player, but the corresponding m3u files sounds like gargling
http://www.telefonica.net/web2/sevarra/list0.m3u
I think there a problem with m3u files and Quicktime.
Tank you very much and best regards.

I have discovered that when the URL is playing (with gargling sound) if I open the A/V controls in QT menus and I move the Jog Shuttle or the Speed level then the sound becomes good.
Yes! Great catch, ttfrank. I can replicate that too.
Interesting ... if (after getting the sound working properly again) you then pause play of the m3u, and start it again, you get the gargling/dalekish sound quality back again.
Bug reporting ... there's a couple of ways you can go about doing this. You can use the QuickTime product feedback form:
http://www.apple.com/feedback/quicktime.html
... but if you want to track progress on the bug, try instead registering as an Apple Developer (for free):
http://developer.apple.com/programs/register/
... and then you'll be able to submit the bug via the Apple Bug Reporter:
http://developer.apple.com/bugreporter/
In the meantime, there's also a restricted forum available to level 4 and 5 members ("Notable New Technical Issues") where we can report this sort of thing. I'll try to get a post written up on the topic there later today.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

One Computer has Premiere 2014.1 and the other has 2014 - I can't download the 2014.1 and i have a file i need to edit. Help...

I have an iMac that has Creative Cloud - it has downloaded Premiere cc 2014.1 and i have a project started on it. I would like to be able use another computer and it has Creative Cloud - same account. and it has Premiere CC 2014.0 I can't get the second to download an up date. I event unistalled and reinstalled with no success.
Please help.
Brent

Brent I would recommend reviewing the installation log files to the update that is failing to apply. You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

I can't comment on foxnews. Same problem with IE, FF and Chrome.

I can't comment on foxnews. Same problem with all three browsers IE, FF and Chrome. The login does not appear on the right hand corner and the comment link does not appear on any article. I already checked to ensure cookies and 3rd party cookies were enabled. I've gone to DISQUS, but it won't let me login there either...doesn't recognize my ID or email addy. Suggestions?.

It appears they've shut down all commenting due to the troll antics on the site. The pornographic images they were posting and the racial attacks (among other things) when posing as conservatives may well have caused this. The Disqus filter wasn't effective in that it is easy to get around. Too bad as it was a great place to vent.

Can't label files in bridge, and problem with starred files

Similar Messages

Maybe you are looking for