Can't launch an URL with a .pdf extension fron 7.0.1 as i could in earlier version 3.5.x?

The website target is dropbox.com. One can access a saved pdf file
directly using the format:
dropbox.com/u/1536975/Schedule_2011.pdf
where the all numeric is a filename. This worked from version
3.6.3 but not in 7.0.1 . When l try to launch the URL, FF momen-
tariley starts to process it then stops. There is no further action on it by FF and it continues to run normally.

Thanks for this mha007 - I can now open FF with a new profile. Can I copy my settings from the old profile or will this bring over the same problem, maybe a corrupt file. If it would bring the same problem, is there any way I can check which file is corrupt, apart from taking them over one by one?

Similar Messages

Captivate 8 : the PDF export created a file with a PDF extension.. but it's actually a video. Shouldn't it export the slides as a proper PDF document ?

In Adobe Captivate, there is a "PDF export" checkbox available when you publish your project.
It checked the box, and the project pulication created a file with a PDF extension.. but it's actually a video. Shouldn't it export the slides as a proper PDF document ?

Thanks for the quick answer. I did not know about interactive PDFs..
I just found how to export as a Word document. I would have expected to find that option in "Publish" or "Export", not "Print".. Anyway, I now have what I needed

How can I redirect a URL with aliases or redirect?

Hi all,
I have this partially working on my servers, but am not 100% sure I am doing this corerectly.
Basically I have a Web site domain, let's call it product.com
In server admin I have a site set up called www.product.com under port 80 and another under port 443 for my SSL pages.
Here is my problem: If a customer types "product.com" in their favorite Web browser address bar, I would very much like the server to automatically redirect them (if that's the correct term) to "www.product.com" Currently they would end up on http://product.com/index.html when they key in the URL without the "www" I am concerned this is hurting my SEO and Google analytics as well as being an issue internally for PHP pages that are coded to the "www" addresses.
I also have a sign-in page for my clients at the address: http://www.product.com/lib/app/auth/authenticate.php. When a client types "signin.product.com" I want them to go to that long URL for the sign-in page. I have gotten this to work by setting up a new Site in Server Admin > Web > Sites named "signin.product.com" which then has a single entry on the redirect tab with the URL of the signin page above. Not sure if that could have been done on the core Web site (www.product.com) or if that was the way I should do it under Server Admin or if there is an easier way to do it.
Primarily I want to be able to handle redirecting any type of subdomain "xxx.product.com" to another address. The primary one I want to deal with now is the "product.com" redirecting to "www.product.com"..... Should I just set up another Web site in Server Admin with a redirect like I did for "signin.product.com"?
Any advice on doing proper redirection appreciated.
-- Jon

There are so many ways you could do this. You need to pick what's right for you.
Some of the options are available through the GUI. Many more are available once you get under the hood and drive Apache directly. Your skill and comfort level will undoubtedly influence which path you take.
At the first level, Apache groups sites together by the hostname used to access the site.
If you want 'www.product.com' to go to the same place as product.com you could create one site with an alias, so that Apache uses the same 'site' configuration for both hostnames.
If you want the two hostnames to do different things then you could create two sites - in this case 'www.product.com' has the full, normal site and 'product.com' has a redirect to the equivalent page on 'www.product.com'.
Within www.product.com you can also setup selective redirects to the HTTPS site. This will ensure that things like the login form are accessed securely. In this way your HTTPS site is another 'site' in Apache with the SSL configuration.
One caveat in your post is the use of 'signin.company.com'. You don't describe your network, but if you have only 1 public IP address then this is going to be an issue since you cannot easily run multiple SSL sites on a single IP address - you'll need a different public IP address for each SSL site. This is because the SSL negotiation occurs before Apache knows what site the request is for, and therefore it doesn't know which SSL certificate to use for the connection.
So, in general, you'll create one site for each variation in your web setup - one for 'www.product.com/port 80', one for 'www.product.com/port 443', one for 'product.com/80' (which redirects to 'www.product.com'), and so on.

Can you save print settings with a PDF?

I have an 8.5"x14" PDF. Is there anyway to save default print settings with this PDF so if a user opens it on their machine it defaults to printing to 8.5"x14" paper? Right now it always defaults to the standard 8.5"x11". I'm not sure this can be done because it seems like more of a specific users machine thing. I don't think you can save print settings with a PDF can you?
Thanks!

The "auto-formatting" of a hardcopy print format is generally the realm of the output device, in this case the printer. Printer software gereally includes an auto-format feature that selects the proper bin. For those who only have a "letter" tray, it usually asks to feed the right format manually, or switch trays. This is not a PDF feature but an output device feature.
Hope this helps.

Can InDesign recognise a URL from a PDF within a picture box?

I want to find out if InDesign can recognise a URL from a PDF which I have pulled into a picture box?
We are using InDesign and DPS to create magazine apps from PDF pages, a lot of these pages have a lot of URL's which we need live in the app. At the moment we create a hyperlink box, open the pdf from the links window and cut and paste each URL into each hyperlink box.
Is this the only way or are we missing something??
Thanks,
B

Is there any sort of workaround?
I was thinking, is there a way to pull the URL's from the pdf's (before importing into InDesign) and then adding them into some sort of list in InDesign, then use the Hyperlinks panel to select the correct URL for the correct Hyperlink box??

Can't "Print" to disk with Adobe PDF 8.0 Printer

If I want to create a PDF, I select "Print" from the File menu.
In the Print Dialog box I select "Adobe PDF 8.0" as the printer.
Then click on the "Print" button and the "Save As" dialog appears.
Select "Desktop" and click "Save" button.
It acts like its "printing" but nothing happens, and the "printed" pdf never appears on the desktop.
Results are similar regardless of the application I start in.
I'm using:
Mac OS 10.6.5
Adobe Acrobat Pro 8.2.5
I've uninstalled and re-installed a fresh copy of Adobe Acrobat Pro 8.0 (then did all of the upgrade patches to 8.2.5)
Where do I start to troubleshoot this?
Thanks.

FIXED IT!!!<br /><br />I worked out that all the problems came down to a single file in my preferences: ~/Library/Preferences/com.adobe.print.AdobePDF8/com.adobe.print.AdobePDF8.Defaults.xml<br /><br />now I opened it up and compared it to a version that was working...<br /><br />>** Excerpt from not working version **<br /><br />><dict><br /> <key>com.adobe.print.AdobePDF.PrintSettings.PDFJobOptionsPath</key> <br /> <string>/Library/Application Support/Adobe/Adobe PDF/Settings/Test(1).joboptions</string><br /><br />>** Excerpt from working version **<br /><br />><dict><br /> <key>com.adobe.print.AdobePDF.PrintSettings.PDFJobOptionsPath</key> <br /> <string>default</string><br /><br />I think what was going on was that the printer was trying to print to job options that either dont exist or dont work... It would stop the queue and also the printer didnt even have any PDF setting in the print dialog box. Now it works fine.<br /><br />So all you would have to do is delete the file, delete the printer from the print manager and then repair the printer from Acrobat and I should work fine!

HT1386 I can't synchronise phone 5s with mac book pro. mac message me : the i phone could not be synchronised because this computer is no longer authorised for purchased items that are on this i phone. then go and authorised mac but keep send me the same

I can't synchronise phone 5s with i tunes . mac message me : the i phone could not be synchronised because this computer is no longer authorised for purchased items that are on this i phone. then go and authorised mac but keep send me the same message.

Hi john,
Follow the troubleshooting steps in this article:
http://support.apple.com/kb/ts1389
Cheers,
GB

PDF report saving with double .pdf extension

Hi Team,
SR Ref: SR 3-5640054491
We came across an issue where in the .pdf report generated out of our BI publisher process is
showing a double .pdf (<xyz>.pdf.pdf) extension, when trying to save from the browser on a MAC - this is reproducible and consistent.
However the data inside the file is proper .
We don't see this issue on a windows machine.
Can someone help us on understanding this behavior and resolving this.
Regards,
Koduri S Chandra Prabhu
Oracle HRMS Payroll
Edited by: user13587486 on Aug 13, 2012 11:57 PM

You do not need to provide file extension since it's already added. Mac OS X hides file extensions by default, you can choose to show all file extensions, overriding the "Hide extension" setting in the "Get Info" window. To do this, click on the desktop to activate the Finder if is not already active and select "Preferences..." from the Finder menu. Then click on the Advanced tab in the Finder Preferences window. Finally, check the "Show all file extensions" box. All file extensions will now be visible both on the desktop and in open windows. If you want to hide file extensions again, simply open the Finder Preferences window and uncheck the box.
Edited by: hidekoji on Aug 14, 2012 9:52 AM

Have AirPort Utility ver 6.1. Can't see printers or external hard drives. I could in earlier version. What gives?

With Airport Utility ver 6.1 can't see printers or hard drives. Dont' even see where to go for those screens. Was much easier in earlier versions. Question: How do I setup ext hard drives and printers in ver 6.1?

You don't need to "see" the printer for it to operate correctly using AirPort Utilty 6.1. If the printer was previously installed, it should continue to operate correctly. If you have a new printer, just install the device according to the manufacturers's instructions.
As far as being able to "see" a disk in AirPort Utility 6.1. Try the following:
Open AirPort Utility, click on the AirPort device, then click Edit in the next box that appears.
Click the Disks tab at the top of the setup window.

Firefox 5 won't connect with the internet. I had to uninstall and go to an earlier version. Now I have these annoying "update Firefox" messages.

Firefox 5 won't access the internet. I had to uninstall and reinstall an earlier version. Now I'm annoyed by "update firefox" messages.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
Also make sure that the firewall isn't blocking Firefox if you've used system restore.
Note that using System Restore can cause your Firefox installation to get corrupted because not all files are restored (only files in a white-list), so be cautious with using System Restore.<br />
You may need to (re)install software that was affected.<br />
Delete the Firefox program folder before reinstalling to be sure that all files get updated.

Using Windows 7 tried to upgrade to Firefox v4.0. Computer must be restarted to complete the upgrade. Done that 6 times. Same result. Can't even uninstall Firefox to reinstall. What to do? Wish I had stuck to earlier version.

The icon on the taskbar is not the usual Firefox one. It is like an installation one. In short, I cannot open Firefox (I am having to use Internet Explorer to gain access to the Internet), I cannot get it to install properly and I am unable to uninstall it to start again with an earlier version. Every time that I attempt to open Firefox, I get the following message: "Your computer must be restarted to complete a previous upgrade [v4.0] of Firefox. Do you want to reboot now?" I have tried that half a dozen times with the same result. I have also used system restore to get back to an earlier status. that, too failed to resolve the Firefox problem.

It is probably because you are not properly closing Firefox. Restarting your system would make sure that Firefox had terminated, but you do not have to do that.
To properly close Firefox on Windows systems, use
:File > Exit or "Firefox:" button > Exit
When you get the message "Firefox is already running" it is too late, and you must force termination of Firefox through the Windows Task Manager before restarting Firefox. Windows 7 has a keyboard shortcut to save you a step "Ctrl+Shift+Esc" then on "Processes" tab, select "firefox.exe" and use the "End Process" button. More thorough would be to right-click on the "firefox.exec" and choose "End Process Tree".
You would find firefox.exe in a Mozilla folder in your program files, but y0u would not want to delete it there, you would need to use the Control Panel which you have already identified and do it from there -- but generally you would not need to do that, and there is nothing in what you have posted to indicate that you should. But if you did do that, then don't let the install start Firefox for you as you would want to use you existing desktop icon or method of starting Firefox, and should decline having Firefox install start Firefox for you. When the install starts then invoke Firefox in your normal manner. This should eliminate problems of creating a new profile rather than using your old profile.

Do the Premiere templates come with 2014 install or do I have to get them from an earlier version of Premiere?

I teach at a high school and my IT person just installed CC 2014, but I do not see Premiere templates. Do I have to install them off of an earlier version?

There are no template files for Creative Cloud, so the "workaround" is to use the files from the CS6 version. You can manually copy the content across into the CC folders:
COPY these three folders:
C:\Program Files\Adobe\Adobe Premiere Pro CS6\presets\Styles
C:\Program Files\Adobe\Adobe Premiere Pro CS6\presets\Templates
C:\Program Files\Adobe\Adobe Premiere Pro CS6\presets\Textures
into:
C:\Program Files\Adobe\Adobe Premiere Pro CC\presets\
There are instructions at http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html to get the CS6 files if you have deleted them from your system.

How can we hide the URL with Webdispatcher after SSO redirect

Repost in correct forum
We have setup SSO with Kerberos and SPNEGO for NWBC and now we want to expose it to the internet via SAP Webdispatcher.
NWBC is on a singelstack ABAP system on server1 and we have configured a standalone J2EE system on server 2 for isuing the saplogon ticket.
This works fine with the redirect from icf NWBC -> Error Pages -> Logon Error -> Redirec to URL (Form Fields) http://server2:port/redirect/redirect.jsp
on server2 we have a java application (redirect/redirect.jsp) witch has %response.sendRedirect("http://server1:port/nwbc")%
Problem is that when the webdispatcher calls http://server1:port/nwbc the URL in the browser is hidden with MYDOMAIN.COM/nwbc but when the Logon-error (no saplogon ticket yet) is redirecting to http://server2:port/redirect/redirect.jsp the browser is showing the actual URL http://server2:port/redirect/redirect.jsp and also when returning to NWBC the browser is showing http://server1:port/nwbc.
And we don't wan't to expose hostnames (server1 and server2) to the internet.
I got this answer:
This question belongs to the SAP NetWeaver Application Server space, this space is for NWSSO topics only, the separately licensed product from SAP.
Regarding your question you have to configure Web Dispatcher for both AS JAVA and AS ABAP and refer to Web Dispatcher URLs only. That includes ICF node configuration and the redirect servlet. The URL generation in AS ABAP needs to be configured so that URLs are generated to point to the Web Dispatcher. Use table HTTPURLLOC for that.
But how do I set up webdispatcher for both ABAP http://server1:port/nwbc (this is working fine before SSO config.) and JAVA http://server2:port/redirect/redirect.jsp?
This is my profile on webdispatcher:
SAPSYSTEMNAME = SID
SAPGLOBALHOST = LOCALHOST
SAPSYSTEM = XX
INSTANCE_NAME = INS
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_CT_RUN)
#SAP Cryptolib
DIR_INSTANCE = D:\usr\sap\SID\INS
ssl/ssl_lib = D:\usr\sap\SID\INS\sec\sapcrypto.dll
ssf/ssfapi_lib = D:\usr\sap\SID\INS\sec\sapcrypto.dll
sec/libsapsecu = D:\usr\sap\SID\INS\sec\sapcrypto.dll
ssf/name = SAPSECULIB
wdisp/ssl_encrypt = 0
icm/HTTPS/verify_client=0
wdisp/add_client_protocol_header = true
wdisp/auto_refresh = 120
wdisp/max_servers = 100
ssl/server_pse = D:\usr\sap\SID\INS\sec\sid2SSL.pse
rdisp/mshost = <ip for abap server1
ms/http_port = <ms http port for abap server1
# Configuration for large scenario
icm/max_conn = 16384
icm/max_sockets = 16384
icm/req_queue_len = 6000
icm/min_threads = 100
icm/max_threads = 250
mpi/total_size_MB = 500
mpi/max_pipes = 21000
# SAP Web Dispatcher Ports
is/HTTP/default_root_hdl = abap
icm/HTTP/j2ee_0 = PROT=HTTP,HOST=Server2,PORT=5xxxx
icm/server_port_1 = PROT=HTTP,HOST=localhost,PORT=xxxxx
icm/server_port_0 = PROT=HTTPS,HOST=mydomain,PORT=xxx
icm/HTTP/mod_0 = d:\usr\sap\SID\SYS\profile\filter_rules.txt
icm/HTTP/admin_0 = PREFIX=/sap/admin,DOCROOT=$(DIR_DATA)$(DIR_SEP)icmandir,AUTHFILE=$(icm/authfile),PORT=xxxxx,HOST=LOCALHOST
and this is the filter_rules.txt
# Rules
if %{HTTP_HOST} RegIMatch MYDOAMIN.COM*
RegIRewriteUrl ^/$ /sap/bc/nwbc?sap-client=200
if %{HTTP_HOST} RegIMatch mydomain.com*
RegIRewriteUrl ^/$ /sap/bc/nwbc?sap-client=200
if %{HTTPS_HOST} RegIMatch MYDOMAIN.COM*
RegIRewriteUrl ^/$ /sap/bc/nwbc?sap-client=200
if %{HTTPS_HOST} RegIMatch mydomain.com*
RegIRewriteUrl ^/$ /sap/bc/nwbc?sap-client=200
I am new to this area

You can use Web Dispatcher for multiple systems, in your case one AS ABAP and one AS JAVA. See the documentation, Implement one webdispatcher for multiple systems - Basis Corner - SCN Wiki and Name-based virtual hosts and one SAP Web Dispatcher to access multiple SAP systems.

I can't send a message with a PDF attachment using Earthlink with Firefox It works with IE and Earthlink

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/937363]]</blockquote>
I can send JPEG and .doc files, but cannot send PDF files. It has just happened again. it is a random occurrence.
If I open Earthlink e-mail in IE, all is OK. If I use hotmail with Mozilla, I can send PDF files. It is apparently a problem only between Mozilla and Earthlink

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Can a webpage with a URL with an added extension be opened with the short URL??

I want to have my website's basic URL: http://www.mousenstein.com open in the browser with the full content; ie the manually added /mousecliks.swf movie using the basic URL only, rather than http://www.mousenstein.com/mousecliks.swf ? Is that possible? If so, how?
Thanks

I'm not totally familar with swf code but try the below. Copy and paste to a new Dreamweaver document, save it to your site root folder and see what happens.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Home Page</title>
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
</head>
<body bgcolor="#000000">
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','nam e','Splashpage','width','550','height','400','id','Splashpage','movie','mousecliks.swf','q uality','high','loop','false' ); //end AC code
</script>
<object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="550" height="400">
<param name="movie" value="mousecliks.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" />

<param name="expressinstall" value="Scripts/expressInstall.swf" />


<object type="application/x-shockwave-flash" data="mousecliks.swf" width="550" height="400">

<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="9.0.45.0" />
<param name="expressinstall" value="Scripts/expressInstall.swf" />

<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>

</object>

</object>
<a href="/mousecliks.swf"></a>
</body>
</html>

Can't launch an URL with a .pdf extension fron 7.0.1 as i could in earlier version 3.5.x?

Similar Messages

Maybe you are looking for