Can't launch audio or video clips on CNN on Firefox

Can't lauch audio and/or clips when on Firefox and the CNN website

Hi Smaeer,
Have you opened the ports that iChat uses anywhere in the connection devices or the Mac Firewall if ON ?
See here for more info http://www.ralphjohnsuk.dsl.pipex.com/page4.html
This page is quite useful for many devices and how to set then up using Port Forwarding. (Pics and instructions including Default access names and password).
Many device also have the UPnP setting. On many a Linksys this is in the Adminstration tab.
Ralph

Similar Messages

  • In the iMovie 11 event library, how can I get the iPhoto video clips to combine with my camcorder pics listed below and in chronological order?

    In the iMovie 11 event library, how can I get the iPhoto video clips to combine with my camcorder pics listed below and in chronological order?

    Try forcing iPhoto to load the Library on the External Hard drive by launching it while holding down the Option key. Choose the Library on the External HD, and quit iPhoto, see if iMovie can see the Library with the iPhoto Videos contained inside.

  • Can I record a we video clip ?

    Can I record a wee video clip using i photo?

    Hi
    Run your mouse along the Dock. Do you see Photo Booth? If you do launch it. You should now be looking at yourself. Below the main window is a section that has 3 icons to the left. One of the icons looks like a small clip of film. Click on this. The Icon in the middle (the red one) turns into a what I think looks like a film camera icon rather than a camera icon. Click on this. You'll now get a countdown of 3 seconds. A timer display will appear to the left of the moving screen. When you've recorded enough click the middle icon again to stop recording. A file of the clip you've just captured will appear in the bottom panel.
    Click and hold this clip and drag it to the desktop. Quit out of Photo Booth. Launch your preferred mail application and add the movie clip as an attachment.
    Your only problem I can see is making sure you keep file sizes down as most ISPs will limit attachment sizes to 15MBs or less. A 1 minute video clip using Photo Booth is approx 3.5MBs.
    That's as simple as I can make it.
    Tony

  • Can't drag audio and video together?

    I have numerous assets in this dvd project. I'm setting up a button to play 10 commercials in a row, a "play all" button.
    I'm editing the 10 commercials in what looks like a mini-video editor, with the video track and audio tracks shown.
    PROBLEM:
    When I grab the video to change the order of my "play all", the audio doesn't move with it. For instance, I'm shifting commercial #3 to become commercial #1. In order for Audio from Commercial #3 to become audio for commercial #1, I have to shift audio #2-10 over to the right to create space for Audio Commercial #3 to insert there. VERY FRUSTRATING and painstaking. And if you accidentally clip a bit off the end or front of an audio portion (easy to do in these tiny little tracks), the sync' is off for the rest of the spots!
    I called Apple "tech support", and the rep' told me you can't drag audio and video together, and made up some excuse about 'this should already be done in Final Cut'. What? I'm just bringing in QuickTime files as assets. Why can't I lock audio and video together?
    Incidentally, Apple's Tech Support is useless you spend $199, or "$799 for a year". This cost was NOT made clear in the original purchase of the product. I'd prefer spending $1000 for a "PROFESSIONAL APPLICATION" and have good tech support included!
    Arrrrgh!
    G4 dual 1.25 gig - 1 gig ram   Mac OS X (10.3.8)   DVD Studio "Pro" 4

    Once in the track, A and V don't get moved together.
    I usually just rebuild the track order from scratch anyway because you can easily lose sync easilly when you are shuffling clip order.

  • Extracting audio from video clip to use as narration?

    Hi there,
    I have a video clip in which I want to take the audio of actor speaking and put it onto another video.
    I.e. he is speaking about walking in the park. I want to take him speaking about walking in the park and put it onto the clip where he is actually walking in the park.
    How do I do this in premiere elements 10?

    Hi Bill,
    Thanks for the quick response. I guess my question now is how would I do those two things?
    In terms of exporting the audio, where can I find that option when I'm on timeline?
    What do you mean by "Alt-click" and what is a "muxed file"?
    Thanks again,
    Mallory
    Date: Fri, 13 Jan 2012 19:01:51 -0700
    From: [email protected]
    To: [email protected]
    Subject: Extracting audio from video clip to use as narration?
        Re: Extracting audio from video clip to use as narration?
        created by Bill Hunt in Premiere Elements - View the full discussion
    Welcome to the forum. There are several ways to accomplish this, and your choice might well rest on how you like to work, and what you are doing, such as Deleteing Video. First, you could Export/Share just the Audio as a PCM/WAV @ 48KHz 16-bit, from your Timeline, and Import that into a New Project, where the Audio WAV file would be used. OTOH, you could Atl-click on the Video portion of the muxed file, and Delete the Video, leaving only the Audio portion. Good luck, Hunt
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4139273#4139273
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4139273#4139273. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Audio and video clip lengths differ in encore timeline

    Hi
    I have been working to build a BD-R H.263 ac3 disk.  I used AME from within Premiere Pro to export the M4V and (at the same time) AC3, using the present defualt parameters-no tweaking of any setting.  The clips appear to play great on encore's monitor--everything in sync.And on the burned BD-R
    However, I am getting the black screen between clips in the timeline when played in the standalone BD player, or (when I had one clip to a timeline) in a playlist.  a previous poster made note of different length audio and video clips.  I zoomed on the timeline and lo and behold--the  the audio and video clips are different lengths.
    This is with the timeline fully expand--each division is a frame. Note that break between the two audio clips is offset from the break between the two video clips by two frames.  This offset is after several clips.  I could find no information on what the one frame crosshatching at the end of the leading clips means.  Can anyone explain this cross hatching?  What do I do about it?  the image below is after the first clip in the timeline:
    In this image, the offset is less than a full frame??????
    I tried using the trim tools to bring these together-but, the trim tool only lets it jump a full frame and then only to a GOP boundary, which doesn't help because the boundaries are obviously different fro the video and audio track.
    I want to emphasize that these assets were created from the Premiere CS4 timeline (which had no offset between audio and video) using the default H.263 and AC3 presets in AME and the same presets selected in Encore.
    The offsets do not appear to cause the actual audio and video to go out of sync when I play the burned disk. But, I get the 1-2 second wait between menus and chapters, or with items in a playlist.
    The audio offset suggests that the player may not know what to do when faced with a chapter point that is different on the audio and video tracks, although, I will note that encore snapped to the joints in the video track not the audio track.
    You can see from this listing that several of the clips audio and video lengths that differ by one frame.  By the end of the timeline, the cummulative offset is 3 seconds (48 minute timeline)
    Can anyone shed any light on this?  Thanks

    I don't think that I had the same problem that you do, but I thought I'd throw in my two cents just in case it might help. Encore would not build the output; it said something like the inpoint and the length did not match the endpoint. Actually, I think this happened in several different situations. In one case I simply adjusted the audio and video tracks to match endpoints. In the other case I went back to Premier and found that in some cases where I had added transitions it had shifted the endpoints of the audio and video tracks so they did not match. I removed the transitions. It didn't matter that much to me since I'm doing this for personal use. Is it possible those crosshatched lines you're seeing are transitions?
    I am using CS 3 and editing HD. I have had many problems with encore. I read in the form someplace that it had a hard time handling H.264 so I changed to MPEG-2 and that fixed one problem. In another case it couldn't find some files and I found some advice not to use HD or wide menus, so I switched to standard 4:3 menus and it worked.

  • Issue - syncing Audio and Video Clips

    Hi Friends -
    Definitely, I am newbie for - editing in this application (Adobe Premier CS6) .
    My idea is to sync audio and video clip - 'based on clip markers' or 'based on Audio wave' .
    But, in my machine, I dont see option to 'add clip markers' (in Marker Menu) for these clips, which are supposed to merge. And, coming 'based on Audio wave' -  I dont even see those options, when I select (both clips to be merged) and choose merge.
    Am I missing any setting - Do I need to have any additional plugins for that? Can anyone pls. help regarding that.
    Thanks in advance.
    Regards,
    Kireeti.

    The audio option wasn't added until Premiere Pro CC.
    You can set clip markers in the Source Monitor with the M key.

  • Merge audio to video clips, end of clip loses audio

    This is driving me nuts. After merging audio and video clips, sync to slate using the in points, everything is in sync.
    The audio is longer than the video itself. But WAY before the scene ends, the audio mutes. The waveforms are visable but no audio plays. It drop out. It happens to every merged clip I create. I don't use the out points either.
    Anyone else have this issue??
    If I take an alternate method to sync them in the timeline and create a clip from there, it makes a new sequence clip losing the scene and take metadata. That's not good. Is there a workaround?

    It happens on every project and different formats. I do use FCP Rescue and that doesn't solve it. I did figure out a work around which involves a few more steps and is more time consuming. Maybe this can help find the problem. Here is the ridiculous workaround steps. We should send this to Apple.
    The "--" are the extra steps.
    To get a good merged subclip.
    Open the audio file and add the 'in point' to the slate.
    --Drag audio clip to the timeline.
    --Drag the audio clip from the timeline to the browser window.
    Merge with video.
    Viola. Audio won't drop out. But the waveforms are completely off with the sound.
    Next step is to open the merged clips and Make Subclip so you don't have that extra media in the beginning and end. And the waveform seem normal.

  • MERGING AND SYNCING more then one audio and video clip?

    Is there are way to select a bin of video clips and a bin of audio clips (DSLR with separate audio) and have Premiere analyze and sync them in batches like Avid. I have a mountain of audio and video clips, but with no rhyme or reason to the file name, no timecode, no slates, just waveforms. But without knowing which audio files go with which video files, it’s impossible (or least time-consuming).
    Or do I have to use plural eyes or other synchronising program for doing that?
    THanks.

    Do the video clips have audio. That is, are you seeking to match A/V clips with audio-only clips? If so, then Premiere can do that. Select all the clips in both bins, right-click & select Create Multicam Source Sequence, and select Sync by Audio.
    Whenever Premiere finds that two or more clips match each other but no others in the batch, it creates a multicam source sequence of just those clips.

  • Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

    Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

    Yes.
    iMovie 11 tutorials:
    http://help.apple.com/imovie/
    http://www.apple.com/ilife/tutorials/#imovie
    and also these:
    http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
    http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#interface

  • I can not launch and play videos on my ipad

    I can not launch or play video on my I pad. I get about:blank white page.

    What website is this from? The video may be rendered in Flash which is not supported on mobile devices.

  • I just recently upgraded to iMovie 10.0.1.  Now whenever I import video longer than 30 minutes, it automatically splits it at 30 minutes.  How can I get my entire video clip at once without a break again?

    I just recently upgraded to iMovie 10.0.1.  Now whenever I import video clips that are longer than 30 minutes, it automatically splits them at 30 minutes.  How can I get my entire video clip without a break again?

    As long as you know your serial number you can download PSE from here:
    Download Photoshop Elements products | 11, 10
    If you don't know your serial number:
    Find your serial number quickly

  • Audio From Video Clip

    I want to use and save as a mp3 only the audio from a video clip. I've detached the audio and
    tried deleting the video file but both the audio and video clip is deleted.

    Pinchemac wrote:
    I want to use and save as a mp3 only the audio from a video clip. ..
    MacOs doesn't support mp3 as an export-format. so, this is a two-step process:
    • in iM, 'Export with Quicktime' your project, choose 'aiff' as Export option (=audio only)
    • import that file into iTunes, which has to be set in its Prefs to 'convert imports to mp3'
    you'll find the resulting .mp3 by ctrl-clicking on your track in iTunes, 'Reveal in Finder'.

  • How can i rewind Or forward video clip in Nokia 62...

    How can i rewind Or forward video clip in Nokia 6230i. plz help me out. thanx in advance.
    Haris

    Hello.
    Fast forwarding and rewinding video on the 6230i is not possible as far as I remember with experience with several Series 40 phones. The proprietary Nokia OS runs a multimedia player incapable of doing this feature. I also have never heard of a certain compatible Java-based media player application which can do this. Maybe the architecture of Series 40 does not support advanced software features allowing this. However if you really want to watch using your phone, you cannot be able to fast forward or rewind.
    Cheers.
    PS:I am not really sure about this though; just a quick opinion. How about some ideas from other 6230i users?
    The world might be a better place if you were I.

  • Where can I download short mp4 video clips to put into garage band for my students to put a soundtrack to?

    Where can I download short mp4 video clips to put into garage band for my students to put soundtracks to?

    Theres a program called Bluestacks app player which when installed gives you an Android enviroment to be able to download apps etc and use/play them on a Pc from this you can then install an app which can create a backup of the app in apk format for transfer to a mobile or tablet etc for installation via your file manager app
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Maybe you are looking for