Can't launch i movie or Google Earth since leopard installed.

Keep getting IMovie and Google Earth message "quit unexpectedly". Added Leopard and Ilife o8 since last night.
Also are all the updates being offerd by Apple because of Leppard.

Upgraded the OS? This is usually an installation issue. There is an easy fix. Do a forum search for ProKit.

Similar Messages

Can't find my photos on my iPad since I installed revel

Can't find my photos on my iPad since I installed revel

Can you give a few more details? Are you not finding photos in Revel that were migrated there or are you unable to see photos that were in your ipad photos?
Pattie

Where can I find a version of Google Earth that I can download using OS X 10.5.8?

Google Earth says it requires OS X 10.6. Where can I find a download that will work with OS X 10.5.8? Thanks!

Force quit Google Earth if it is open. Then, if there is a copy of Google Earth in your Applications folder, drag the Google Earth on your desktop to the trash. Don't empty the trash yet.
Open the Google Earth from the one in the Applications folder. If this is the first time you used it from the Applications folder, you might get the message, "this is an appliaction you downloaded from the internet. Do you want to open it?" Open it, let load completely, quit it, and open it again. The message should not reappear.
Now empty the trash.
Restart your computer. Does Google Earth reappear on your desktop? If so, there is probably a LaunchAgent for it in your Macintosh HD> Users> your user name> Library> LaunchAgents folder. You can remove it. It could be under the Macintosh HD> Library> LaunchAgents or Launch Daemons or StartupItems folders.
I can't remember exactly where it was, but I hated it appearing on my desktop, and I removed from one or more of these locations.
Good luck.

How do I export an album from the iPhone Photos app in a form that retains location information so I can import it to ArcMap or Google Earth?

I have an iPhone 4S with OS 5.1 installed and I have taken several hundred photos that are geotagged and that show up in the Places page in the Photos app. These were taken for field work and have data in them that we want to use to tie information in the photos to locations in a GIS application. Therefore I would like to be able to export the mapped locations along with the photos in a way that would allow me to upload the locations to ArcMap or to Google Earth. I know that the individual photos have location information but the process of uploading them to Panoramio one at a time is labor-intensive, whereas I can take an entire album in the Photos application and quickly display locations tied to photos on the screen.
Also these photos were taken before I enabled iCloud on my iPhone and I'm wondering how to upload them even though they were taken previously. When I go into the "share" menu my only options are email, tweet, message, and print. I'd like to send the whole album to iCloud so I can at least bring it back into applications on my Macbook Pro.
Does anyone have a recommendation as to how I can go about doing either of these things?

This is something that I want to do as well. I'm new to applescript, but I found this script:
http://www.bagelturf.com/aparticles/tips/tipprint/index.php
Go to about half way down the page. The script works well, but I'd like to change it so that I only export Versions w/ a specified "main rating" (or greater than a minimum rating)
If you look at the script, there's a line:
"set theimages to every image version as list"
FYI: "image version" is an Aperture class that represents an image version. "main rating" is a property of "image version"
Is there a way to modify this applescript statement to spec only those "image versions" that meet a min "main rating"? I tried a bunch of things, and none of them compiled. (I need to learn Applescript)
If not, then how could this be done w/ a little loop in Applescript?
Thanks for your help!

No ping / traceroute / google earth since Pacman Syu today

Hello,
I did a pacman -Syu this morning as I do most days. To be honest I can't recall precisely what was updated (kernel headers, glibc not sure what else - sorry). I am now finding that while I can surf the web / be on IRC / dowload my e-mails - some things are broken. I am not sure if they are related, but they were all working very recently. I use pan for usenet and it is giving me "no such process" when trying to contact my news server. whois is giving "Temporary failure in name resolution", ping and traceroute are is giving "unknown host" on everything, and google earth "cannot contact authentication server".
I have not done anthing to my network settings or router, and other boxes using it can still (eg) ping out.
I am nervous about trying a reboot in case I lose the connectivity I have, because I really need this box functional on the net at the moment.
I am baffled. Any ideas please?
Added by way of edit : - I had both Firefox and Opera open. I tried closing Opera and on restarting it cannot connect to the net. I suppose that I will lose connectivity with other applications if I close them.
Second edit : So I got my head out of my rear sufficiently to read the pacman.log. Todays upgrades were :
[2008-12-16 10:15] starting full system upgrade
[2008-12-16 10:28] upgraded kernel-headers (2.6.26.3-1 -> 2.6.27.6-2)
[2008-12-16 10:28] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2008-12-16 10:28] Generating locales...
[2008-12-16 10:28] en_GB.UTF-8... done
[2008-12-16 10:28] en_GB.ISO-8859-1... done
[2008-12-16 10:28] Generation complete.
[2008-12-16 10:28] upgraded glibc (2.8-3 -> 2.9-2)
[2008-12-16 10:28] upgraded binutils (2.18-9 -> 2.19-1)
[2008-12-16 10:28] upgraded bison (2.3-4 -> 2.4.1-1)
[2008-12-16 10:28] upgraded dhcpcd (4.0.4-1 -> 4.0.7-1)
[2008-12-16 10:28] upgraded gcc-libs (4.3.2-1 -> 4.3.2-2)
[2008-12-16 10:28] upgraded gcc (4.3.2-1 -> 4.3.2-2)
[2008-12-16 17:16] synchronizing package lists
I don't know what could cause this apart from glibc.
I am also wondering whether this is the related to the issue metalforever reported earlier today with his "transient resolver failure"
It makes no difference to run as root btw.
Last edited by perseus (2008-12-16 17:56:35)

I found that the problem was a DNS one. ping etc worked if I fed it IP addresses instead of domain names. I am using pdnsd, which seemed to be working so far as I could tell. The daemon was running and "pdnsd-ctl dump" output the contents of what seems to be a valid cache. I changed /etc/resolv.conf to stop using pdnsd temporarily and my DNS came back.
I still don't have the faintest idea why this problem has arisen. I am too busy to try taking it any further at the moment. Maybe I should cross-post this in the networking forum.

Can't launch iTunes due to previous version of QuickTime installed

I installed an older version of QuickTime, now I can't launch iTunes anymore. In Control Panel, I have QuickTime 32--version 2.11.57 listed. I did everything in the document http://discussions.apple.com/thread.jspa?messageID=3366434&#3366434
but nothing has worked. I can't seem to uninstall the old version of QuickTime. When I run QTInstaller713.exe I get an error message about "Can't install because a newer version is already installed"
Sony Vaio VGN-S260 Windows XP

There are no QuickTimes listed in the Add/Remove list. I see it listed in the Control Panel where there is a QuickTime and a QuickTime 32 (v2.11.57). I also see it in Start > Programs > QuickTime. When I click on that I get the message: "This action is only valid for products that are currently installed."

Failure to Launch since Leopard install

Since installing leopard 10.5.2 I can't launch idvd (version4). I am constantly given the error message "failure to launch" Any suggestions? Are there any downloads that may be able to fix it?

Hi
NO - there is no solution.
You need a version more modern than iDVD 5 to be able to run under Mac OS X.5 !
No there are no download-fixes.
alt. Partioning the hard disk or use another FW external one with an older Mac OS
and start (boot) from this when doing DVDs.
Yours Bengt W

Where can I buy a 15" Macbook pro with Snow Leopard installed

I would appreciate knowing where can I buy a 15" Macbook pro with Snow Leopard installed

http://store.apple.com/us/browse/home/specialdeals/mac/macbook_pro/15

I can't delete anything (movies or songs) from iTunes, after installing Lion

When I select a song or movie and go to edit at the top the delete choice is grayed out and I can't delete anything?

Try using the Delete key on the keyboard.
At least, thats what others are suggesting here -> Can't delete files in iTunes 10.4 (80) OS 10.7 Delete in the edit menu is not hi-lighted?

Why can't I play movies on my iPad since updating to ios7

I have recently updated my ipad mini, to ios7 and now movies that played before updating wont play, although they show in movie menu, when play is clicked, they just open and then close back to menu ?

First, try resetting your phone: Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release.

Can't launch Final Cut Pro 7 on Snow Leopard

Guys,
I have succesfully installed FCP on my MacBook but anytime I start it I get the following error:
Process: Final Cut Pro [3227]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCutPro
Version: ??? (???)
Build Info: FCPApp-906181654~22
Code Type: X86 (Native)
Parent Process: launchd [82]
Date/Time: 2010-07-03 16:06:05.310 +0200
OS Version: Mac OS X 10.6.4 (10F569)
Report Version: 6
Interval Since Last Report: 332243 sec
Crashes Since Last Report: 15
Per-App Crashes Since Last Report: 11
Anonymous UUID: A669B700-2A79-46C5-8E92-0030869EA871
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
Referenced from: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Reason: no suitable image found. Did find:
/System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit: unknown file type, first eight bytes: 0x31 0xED 0x25 0xF2 0x20 0x3E 0xDD 0x0F
Model: MacBook5,2, BootROM MB52.0088.B06, 2 processors, Intel Core 2 Duo, 2.13 GHz, 2 GB, SMC 1.38f5
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.3f8, 2 service, 19 devices, 1 incoming serial ports
Serial ATA Device: ST9500325AS, 465,76 GB
Serial ATA Device: HL-DT-ST DVDRW GS22N, 7,24 GB
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0x24400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x022a, 0x04600000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: USB MFP, 0x04b8 (Seiko Epson Corp.), 0x0818, 0x04100000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000
Does anyone know a solution for this?
Thanks for your help

Upgraded the OS? This is usually an installation issue. There is an easy fix. Do a forum search for ProKit.

Can you update iPhone to ios5 with only Snow Leopard installed on mac?

I know iCloud requires Lion but will it be possible to update to ios5 without signing up for iCloud?

Yes, you can.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Can't get some websites to work after snow leopard install, java maybe?

I'm a day trader. I use TD Ameritrade every day to work on. I believe the real time streamer and level 2 quotes are all java based.
This past weekend I did the Snow Leopard install on my computer. Until this morning it seemed like all was well.
I go to ameritrade and try to log in and it keeps saying it doesn't recognize my log in. I called them and they are able to log into my account so its my computer. I went to the java preferences and there use to be a lot of java types there now there are just 2, could that some how be it?
Any suggestions?
Susan

Safari is a 64 bit application, is it worth starting the app in 32 bit mode and testing if it is any better.
use finder and highlight Safari in the applications directory, do a get Info (cmd i) and tick the 32 bit mode box and restart Safari.
If it does not help remember to revert back to 64 bit mode.

Nokia 6680 can't be added in iSync 3.0 - fresh Leopard install

In Leopard (10.5), the Bluetooth setup assistant only gives me the option to use my Nokia 6680 as a modem. No options to sync it with the address book or the calendar. iSync finds the device, but says 'iSync cannot connect to this device'.
I have been able to sync my address book and calender in Tiger for some time now (I don't remember in which minor version update it was introduced).
The phone is still listed as supported on Apple's web pages. It is also mentioned in /Applications/iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/ PlugIns/PhoneModelsSync.phoneplugin/Contents/Resources/MetaClasses.plist
However, it does not have its own folder under /Applications/iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/ PlugIns like many other phone models.
The Nokia software on my phone is (no vendor lock etc.)
V 5.04.07
15-02-06
RM-36
Nokia 6680
Any idea of what I might be doing wrong?
Thanks! Any answer would be greatly appreciated.
Best regards,
Lars Nummedal

Thanks, man!
I didn't think of deleting the old iSync agent on the phone - being used to the Mac just working out of the box
Mine also hung on 33 % progress for five minutes, but then it progressed and finished; importing all my contacts and calendars from the phone.
The 33 % for five minutes progress hang happened only on the first sync.
Best regards,
Lars Nummedal

[SOLVED] Google Earth doesn't work with xf86-video-ati

Hi all,
I'm having a problem with the open-source ATI drivers. I haven't had much luck finding out anything from anywhere else, so I'm hoping someone here can help.
Whenever I start Google Earth, the graphics run EXTREMELY slowly, almost as if it's running on a system with low memory. I'm running an Acer Extensa 4420 with an AMD Athlon 64 X2 dual-core 64-bit processor with 2GB of RAM. As mentioned before, I'm running on the open-source xf86-video-ati drivers, but this is the only app that gives me problems. GL screensavers run fine, and glxgears runs without any significant input. Running Google Earth in terminal also gives no output.
And I'm not sure if this is related, but closing Google Earth also crashes X.
Here's xorg.conf:
Section "Module"
Load "extmod"
Load "dbe"
Load "record"
#Free86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
Load "drm"
Load "synaptics"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
Option "DontZap" "no"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
Option "AutoAddDevices" "False"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "acer_laptop"
Option "XkbLayout" "us,de"
Option "XkbOptions" "grp:lwin_switch,grp_led:num,eurosign:e"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "AlwaysCore" "true" # send events to CorePointer
#Option "Device" "/dev/input/mice"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "false" # configurable at runtime? security risk
Option "LeftEdge" "1700" # x coord left
Option "RightEdge" "5300" # x coord right
Option "TopEdge" "1700" # y coord top
Option "BottomEdge" "4200" # y coord bottom
Option "FingerLow" "25" # pressure below this level triggers release
Option "FingerHigh" "30" # pressure above this level triggers touch
Option "MaxTapTime" "180" # max time in ms for detecting tap
Option "VertEdgeScroll" "true" # enable vertical scroll zone
Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
Option "CoastingSpeed" "0.30" # corner coasting speed
Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
Option "MinSpeed" "0.10" # speed factor for low pointer movement
Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
Option "TapButton1" "1"
Option "TapButton2" "2"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Acer Laptop"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 57.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "ATI Radeon"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
Option "AGPMode" "4"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
Option "AGPFastWrite" "yes"
Option "EXAVSync" "yes"
Option "ForceTVOut" "true"
Option "TVStandard" "ntsc"
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ATI Radeon"
Monitor "Acer Laptop"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1200x800"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
Here's my drirc:
<driconf>
<device screen="0" driver="r300">
<application name="Default">
<option name="force_s3tc_enable" value="false" />
<option name="texture_coord_units" value="8" />
<option name="fthrottle_mode" value="2" />
<option name="disable_stencil_two_side" value="false" />
<option name="tcl_mode" value="3" />
<option name="texture_depth" value="0" />
<option name="fp_optimization" value="0" />
<option name="def_max_anisotropy" value="1.0" />
<option name="no_rast" value="false" />
<option name="command_buffer_size" value="8" />
<option name="round_mode" value="0" />
<option name="dither_mode" value="0" />
<option name="disable_lowimpact_fallback" value="true" />
<option name="texture_image_units" value="8" />
<option name="disable_s3tc" value="false" />
<option name="color_reduction" value="1" />
<option name="vblank_mode" value="1" />
</application>
<application name="Google Earth" executable="googleearth">
</application>
</device>
</driconf>
Last edited by coolpyrofreak (2009-07-03 05:56:18)

I had the same problem (slow googleearth) with ATI Technologies Inc Radeon Mobility U1 (IGP 320m).
This .drirc solves it. I don't have an xorg.conf.
- no need for the 'disable_lowimpact_fallback' option
- no need to turn off 'atmosphere'
cat .drirc
<driconf>
<device screen="0" driver="radeon">
<application name="Default">
<option name="force_s3tc_enable" value="false" />
<option name="no_rast" value="false" />
<option name="fthrottle_mode" value="2" />
<option name="tcl_mode" value="3" />
<option name="texture_depth" value="0" />
<option name="def_max_anisotropy" value="1.0" />
<option name="no_neg_lod_bias" value="false" />
<option name="texture_units" value="3" />
<option name="dither_mode" value="0" />
<option name="hyperz" value="true" />
<option name="round_mode" value="0" />
<option name="color_reduction" value="1" />
<option name="vblank_mode" value="0" />
<option name="allow_large_textures" value="1" />
</application>
</device>
</driconf>

Can't launch i movie or Google Earth since leopard installed.

Similar Messages

Maybe you are looking for