Can't Launch Integration Builder, help me.

I downloaded Full ABAP Edition of SAP NetWeaver Sneak Preview and Trial, after install, I wanna develop XI-CONTENT, but cann't Launch Integration Builder, always open 'SapWorkDir' directory, but no error message showed, status bar print "starting browser...". And I did not using J2ee Server, only ABAP edition, of course J2SE 1.4.2.12 has been installed.
I do not known why , thanks for any help.
by the way I looked Syslog, there always a "Communications data: Service initialization failed" message each time I start NSP instance, but every things seems ok.

Hi,
Just adding on to what Michal said,
SDN has recently released 2 Sneak Preview products:
- SAP NetWeaver 04 SP15 Full Java Edition
- SAP NetWeaver 04s Full ABAP Edition (with Web Dynpro for ABAP)
But for XI we need both the Java and Abap stacks and not just having them individually, because of which you cannot use it for XI.That is, the Sneak Preview products contain either the JAVA or the ABAP stack but not both together.
The link below i guess will also help you learn more about the Sneak Preview products and get a clear idea on the same:
http://www.howforge.com/news/sneap-prevew-sap-netweaver-04-sp15-java-abap
And incase you had installed XI or PI has Michal suggested then probably the solution provided by Ben will be useful..
I hope this clears your doubt....
Regards,
Abhy

Similar Messages

How to launch integration builder with IE proxy?

Hi,gurus:
Our XI server is in remote side, so we have to set the IE proxy while launching integration server.But as you know,the integration builder woud not be launched successfully with IE proxy.So how can we deal with it?
Any help will be appreciated!

Hi,
The error message is "unable to launch integration builder" ,which all of us might have ever met.
I think it is the cause of IE proxy,but we have to set the proxy to get the environment from remote XI server.
I have referenced note 800267,but it seems of no avail.
Any ideas?

Can't open Integration Builder Repository in SAP XI 7.0 after CodeMigration

We had Communication Channel code change , for which the cache in the adapter engine was failed up update automatically. I rebounced the Web AS SAP Server ( Java stack only) and after than point I cannot launch Integration Builder Tool( Repository) in SAP XI 7.0.All other message are processing fine.Only we cannot open the Integration Buildter tool using URL
http://<hostname>:58900/rep/start/index.jsp
500 Internal Server Error
Exception
An internal error occurred. Contact you XI administrator
java.lang.NoClassDefFoundError: com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl (initialization failure)
Error Details, Error History, Build Info, Generic Application Info
Any take on this one?Please help. This is our Production Server.
Thanks
Satpal Singh

Praveen,
Restarted both ABAP and JAVA , but did not helped.We did that as first step.
We are unable to launch the Integration Server Repositorty Tool.
We get following detail on the Error info of the page that shows up.
500 Internal Server Error
Exception Details
Exception class: java.lang.NoClassDefFoundError
Message
java.lang.NoClassDefFoundError: com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl (initialization failure)
Stacktrace
Thrown:
java.lang.NoClassDefFoundError: com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl (initialization failure)
 at java.lang.J9VMInternals.initialize(J9VMInternals.java:130)
 at com.sap.aii.ibrep.server.transport.api.RepTransportServiceStartup.startupIbrepTransportServices(RepTransportServiceStartup.java:22)
 at com.sap.aii.ibrep.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:442)
 at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
 at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
 at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
 at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
 at jsp_Main1203628046558._jspService(jsp_Main1203628046558.java:21)
 at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(AccessController.java:215)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Problem Launching Integration Builder

Hi XI Gurus,
I am getting Problem with Launching Integration Builder
I Installed XI SP15, I am able to launch IB from server where I installed XI, but not able to launch IB from different machines in my network, I tried different possible scenarios which are available in sdn . like setting webstart preferences ,clearing cache of webstart, playing with Administration tool by Re-Initialization, Re-Initialization and force-signing, and delete lock, added Sysetem IP in dispatcher services binding,I tried, tried ............. now I am tired.
Please help me now I am struck.
Thanks!
Kindest Regards
Srinivas Ayyala

Hi Aravind and Michal,
thanks for your timely reply, I tried with IP Address in browser too and i forgot one more thing I did in my POST
when i tried with wrong userID and password I am getting message stating that not authenticated
now i configured my webstart for log
I Got this message in my log file
Logging to file: C:\WebStartLog\webstartproblem
INFO: using logging implementation "Dual SAP/AII Logging"
INFO: log configuration file "C:\Documents and Settings\vsshetty\Desktop\log.properties" could not be read
INFO: using simple log configuration
<<< frog.jar: version 5.1.4 08/20/04 sap.theme: Streamline >>>
java.lang.NoClassDefFoundError: com/sap/engine/services/security/server/AuthenticationContextImpl
 at com.sap.engine.services.security.login.SecuritySession.expire(SecuritySession.java:236)
 at com.sap.engine.services.security.login.SecuritySession.setExpirationPeriod(SecuritySession.java:316)
 at com.sap.engine.services.security.login.TicketGenerator.getSecuritySession(TicketGenerator.java:127)
 at com.sap.engine.services.security.login.SecurityContext.load(SecurityContext.java:234)
 at com.sap.engine.services.rmi_p4.Message.loadContextObject(Message.java:343)
 at com.sap.engine.services.rmi_p4.Message.parseMessage(Message.java:239)
 at com.sap.engine.services.rmi_p4.Message.getByteArrayInputStream(Message.java:314)
 at com.sap.engine.services.rmi_p4.Call.getResultStream(Call.java:183)
 at com.sap.engine.services.security.remote.login.RemoteLoginContextHelper_Stub.login(RemoteLoginContextHelper_Stub.java:126)
 at com.sap.engine.services.security.remote.login.RemoteLoginContext.login(RemoteLoginContext.java:140)
 at com.sap.aii.ib.clsif.login.EJBHomeFactory.logonWithoutTicket(EJBHomeFactory.java:503)
 at com.sap.aii.ib.clsif.login.EJBHomeFactory.connect(EJBHomeFactory.java:354)
 at com.sap.aii.ib.clsif.login.EJBHomeFactory.initRemoteFactory(EJBHomeFactory.java:117)
 at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.initRemoteFactory(LoginServiceProvider.java:314)
 at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:216)
 at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:172)
 at com.sap.aii.ib.clsif.login.LoginServiceProvider$LoginServiceImpl.login(LoginServiceProvider.java:166)
 at com.sap.aii.ib.gui.login.SplashLoginImpl.doLogin(SplashLoginImpl.java:165)
 at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:440)
 at java.awt.event.InvocationEvent.dispatch(Unknown Source)
 at java.awt.EventQueue.dispatchEvent(Unknown Source)
 at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.run(Unknown Source)

Launch Integration Builder

Hi,
I am new to XI Having problem in launching INTEGRATION BUILDER which I am getting message 'web pages not found'.
My web address is like "http://pi71server1:50000/dir/start/index.jsp".
But my configuration settings in 'SXMB_ADM' > Integration engine configuration> parameters: IS_URL current value dest://SAPISU_XID.
I know I am missing some thing here. And also I have taken care on JAVA WEB START.
But I coundnt stat 'Integration Builder'.
Could some one please let me know where exactly I am missing.
Thanks,
Deepak.

Hi Deepak,
I think the problem with JAVA Version,which version of jre installed on your machine,use 1.5 version,it wl work fine.
Are you able to access ABAP Stack?? if yes then the problem with JRE only.
Regards,
Raj

Unable to Launch Integration Builder: Java Web Start problem

Hi,
I am unable to launch the integration builder. I am using JDK 1.4.2_05. The java Web Start gives the following error:
Unsigned application requesting unrestricted access to system
Unsigned resource: http://<XIHostName>:50000/rep/repository/aii_util_rb.jar
I have tried deleting the Java web start cache, and even reinstalling the JDK.
Can someone suggest a workaround this problem ?
thanks,
Manish

The Java Web Start cannot accept unsigned jars. If the jars are signed, it will ask in a dialog box if it should allow unrestricted access to this jar.
In my case, I upgraded XI SP0 to SP4, which included updating the Adapter Core, Adapter Framework, and the XI TOOLS to SP4.
On launching the Web start, it seemed that the jars were not getting signed. JWS cannot allow unsigned jars to the client.
These jars are maintained in:
\usr\sap\<SID>\SYS\global\xi\directory_server\javaws\directory
I am having problems with my XI upgrade to SP4, and it is probably not signing the jars.
Do you know why this may be happening ...
thanks,
Manish

Launch Integration Builder - Checking version

I have recently received a new laptop at work.
When I launch the Integration Builder: Design and Integration Builder: Configuration from the web page, it says checking for latest version before actually launching the application and this takes ages.
Is there anyway to stop this happening. It didn't do this on my old machine.
We are on XI3.0 (sp12), I am have JAVA 1.4.2_08 on my machine.

hi,
try moving content of 2 folders from:
C:\Documents and Settings\youruser\Application Data\Sun\Java\Deployment\javaws\cache\http\DXISERVER\PJ2eeport
to some other location
when next time you'll log to IB java will be loaded again
and this may help you
Regards,
michal

Unable to open/launch Integration Builder.

Hi,
I am unable to open Integration Builder.
Once I click on the link "integration directory", User Id and Password screen appears and when I enter the correct user ID and Password, Nothing happens, only the" Wait" icon appears for ever.
I understand that itu2019s something to do with our access in my machine. We have stiff security policies.
In internet explorer setting --> I have "Accept all Cookies" and also Pop-ups are not blocked (as Privacy setting)
Please help me to resolve this issue.
Regards,
Rehan

Nothing happens, only the" Wait" icon appears for ever.
Please check with your basis if there in any space issue in the server.Also check if your other mates can open the Builder or not.
Go to control panel->java->general->delete temp internet files and try lauching.
If there is any issue with java webstart the
Check /people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support .
Go to integration Builder ->Administration tab ->Java webstart administration.>Reinitialize
Regards,
Srinivas
Edited by: Srinivas on May 5, 2010 11:58 AM

Can not use integration builder,when i start integration builder....

hei,dear guys:
 i intalled the xi3.0 according the installation guid, and there is no error occurs in my instalation process, but when i excute the post intallation task, i found i can not assign application roles to user gruops. and the follow task i can not excute also. when i use http://<J2EE_host>:<J2EE_Port>/exchangeProfile or http://<J2EE_host>:<J2EE_Port>/SLD to access my j2ee application,the error occurs: 404 not found
 the requested resource does not exist
 but i can access the main page http://<J2EE_host>:<J2EE_Port>/ and can use the web service navigator .......
 by the way i use an local sLD option when i installed the SAP component.
 when i start integration builder, my operation system open the sapworkdir filefolder.......
 what should i do now.
thanks!
Message was edited by:
 zhiyong Chen

if you are using the correct host name and port (5<SYSNO>00)
try and go to home page@
http://host.fqdn;5<SYSNO>00/index.html
try and add the /rep/start/index.jsp instead of index.
Also maybe worth trying to run the RSXMB_ACTIVATE_ICF_SERVICES from se38.

Can't launch Acrobat 9 - HELP!

Can anyone help:
I have just installed a legal, purchased copy of Acrobat 9 Standard, but after I accept the user agreement, the program shuts down... no error messages or anything.
Here is my history:
I initially downloaded the trial version of Acrobat 9 Pro, but I had the same problem. I uninstalled and tried again. Same result.
I got the Acrobat DVD with license and installed it... same result.
I uninstalled and ran ccleaner to clean the registry. I also manually removed a few Adobe Acrobat entries from the registry.
I reinstalled from the Acrobat DVD... same result.
Any thoughts on what is keeping me from launching this product? I have spent way too much time for what should be a simple task.
Many thanks!

Try the licensing repair tool:
http://www.adobe.com/support/contact/licensing.html

How can I launch Flash Builder 4.7 without it launching the workspace?

I renamed the project by right-clicking and renaming. Now everytime I run flash builder, I get a script error. I can restore from backup if I can launch without it trying to load the difault project. Any ideas?

Window>Preferences>General>Startup>Workspaces>Prompt for workspace on startup
and/or
Window>Preferences>General>Workspace>BUild automatically (deractivate)

CS6 subscription expired. I had to use a different email to renew it and I still can't launch it. HELP!

I cannot access my Photoshop CS6. I got a message that my subscription had expired and I had to renew it. I don't have the email anymore that I used to buy the subscription last year so I used a different email to purchase a subscription to CS6 but I still get a message saying I need to renew it. HELP! I need to use my CS6 as I am way behind in editing.

You cannot send using iCloud's outgoing server with anything other than your iCloud address. You can perfectly well send from Mail using your ISP's server.

I can not launch the Elements help online in Elements 11.

I keep getting this message> There was an error launching the default browser. You may need to re-install the application and the help component. I checked online at the adobe website and followed instructions on how to get it to work, with no luck. So I de-activated Elements and did a uninstall/reinstall and STILL have the same problem. How do I get this fixed?

http://forums.adobe.com/thread/992825?tstart=0

The launching time of integration builder is extremely longer

Dear XI experts
I will tell you our story.
When I execute Demo examples (Chapter 5.1.3 Executing and Testing XI 3.0 Demo Examples Configuration)
We got the error STRING_BAD_REF dump when starting BSP application, I found out the solution : SAP Note Number : 869197
We did upgrade to a 6.40 kernel patch level 48 as mentioned in the SAP note.
After that, whenever I launch (start) the integration builder, it takes for ages.
Between [login screen]
http://static.flickr.com/56/117541396_db88ce7101_o.jpg
And [integration builder launching screen]
http://static.flickr.com/35/117541397_4bc79529e8_o.jpg
Ironically the websites related to Java engine pop up as usual, such as SLD, Java start page and so on. Also after few minutes I can get the integration builder in front of my eyes. However, whenever I try to create objects or call some information from the server it also takes time.
Which part do I need to look at in details?
Thank you for your reading.
I will appreciate your any comment.
Regards,
David

I collect some posts related to my problem ( i think ).
Slow response time
Problems in RWB XI 3.0
XI Running Very Slow
XI Running Very Slow
Performance Tuning
Re: Performance Tuning
Problems after Update to SP13
Problems after Update to SP13
Server Performance Declines
Server Performance Declines
Performance Analysis with Single Message
http://help.sap.com/saphelp_erp2005/helpdata/en/42/e7bb8f7c9d3ee0e10000000a1553f6/content.htm
Problems in RWB XI 3.0
Mapping tool very slow after upgrade to SP15

How to Launch an Integration Builder under two different java versions

How to Launch an Integration Builder under two different java versions 1
1. Situation 2
2. How To Do 2
2.1 jre preparation 2
2.2 Put them into the system 2
2.3 Execute a Java Web Start under jre 1.4.x version 3
2.4 Change Java Runtime Versions 3
2.5 Launch an Integration Builder 6
1. Situation
OS: windows 2000 pro English
Java version: jdk 1.5.x was already installed. (Its not permitted to change.)
I dont have any authorization to install any software on the PC.
But I need to use an Integration Builder.
I already knew URLs of an Integration Builder (http://<hostname>:50000/rep/start/repository.jnlp).
2. How To Do
At this moment, an Integration Builder (XI 3.0) can be launch under jre 1.4.x environment (on windows).
2.1 jre preparation
I download j2re-1_4_2_10-windows-i586-p.exe from http://java.sun.com/j2se/1.4.2/download.html
I installed it on my home PC and copied all files from C:\Program Files\Java\ j2re1.4.2_10\ into my USB.
2.2 Put them into the system
I pasted j2re1.4.2_10 folder from my USB into the windows 2000 pro system.
Finally, I could list up all of javaws.exe under this system.
c:\j2re1.4.2_10\javaws\javaws.exe
c:\Program Files\Java\jdk1.5.0_05\bin\javaws.exe
c:\Program Files\Java\jdk1.5.0_05\jre\bin\javaws.exe
c:\Program Files\Java\jre1.5.0_05\bin\javaws.exe
2.3 Execute a Java Web Start under jre 1.4.x version
I executed c:\j2re1.4.2_10\javaws\javaws.exe .
2.4 Change Java Runtime Versions
Go to File-> Preferences -> Java
As you can see, it indicates 1.5 version.
Click [FIND] button.
Click [NEXT] button.
Click the j2re1.4.2_10 folder.
Click [NEXT] button.
A JRE Finder is able to find javaw.exe automatically. Or you can indicate C:\j2re1.4.2_10\bin\javaw.exe directly.
Click [NEXT] button.
Finally, there are two Java Runtime Versions. Now you need to uncheck the Enabled column of 1.5 version and check 1.4 version.
Click [OK] button.
Well, in the General tab, I selected None for Proxies.
2.5 Launch an Integration Builder
In the Location field, I typed the URL of an Integration Builder jnlp.
http://<hostname>:50000/rep/start/repository.jnlp
SAP Integration Builder comes up inside Applications area.
Select it and click [Start] button.
If you click Environment-> Integration Builder (Configuration), you can launch Integration Builder: Configuration.
[PDF file location] with screenshots
http://SDN.mobilian.org/SDN/How2LaunchIB.rar
===================Advertisement==========================
How do you search SDN?
What about [SDN Search Widget]?
SDN Search Widget
=========================================================

I am not getting anywhere with deploying my application or
applet.
I have set up my bc4j project. It contains all my VO info,
links, application module. (proj a)
I then have another project with DbInfo in it(has all my rowset
info), Multiple Frames, and my Applet.java file.
Actually I have an Applet.java file and a Application.java file
because I was seeing if both/either worked. Anyway they seem the
same, except for that extra window that comes up when you run the
applet.
I follow the steps in the oracle directions (from earlier post).
And all seems ok. But at ---->
[*] Select the subdirectory under myhtml where your applet's HTML
file
is located, and enter the directory path of the 'staging'
directory you
created in step 3 above, if different from the default.</li>
[*]Select the HTML files that JDeveloper created to run your
applet.</li>
[*]Select all of the Java source files in your project that make
up the
applet.</li>
I have no HTML file associated with my applet, at least that I
know of.
So do I need to create one, or should it of been done
automatically.
Also, I trying to figure out what will be the best way to deploy
my project. Applet or stand alone application is what my first
choices have been so far. I have read that there is some issues
with applets being served from a different server than the
database. So a stand alone application was my front runner, but
I haven't gotten either way to work yet.

Can't Launch Integration Builder, help me.

Similar Messages

Maybe you are looking for