Can't Launch Oracle 9IFS Domain Controller

I had installed Oracle IAS 9.02 and Oracle IFS 9.02.
And i had followed the instruction to startup IFS from
the setup and administration documentarion.
But still i cannot get it startup.
I try to launch it from the IAS web admin menu but it can't launch.
I try manually by doing this action :
1. starting up emctl.bat
2. running launchdc.bat (it hang)
3. running launchnode.bat (it hang)
4. running ifsstartupdomain.bat (err:cannot connect to ifs)
I dunno what else i can do, because i had installed oracle IFS8 and it worked just fine. Setting and tuning is easier than Oracle 9IFs.
Is anybody got a clue why cant i get it to start.
Thank you

I do have the same problem.
I read in one of the messages here that we need to run a specific patch file to get iFS 9.0.2 running against Database R2. Don't have the patch name, still searching.

Similar Messages

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!.

Can't make a Backup Domain Controller

I have one Open Directory Master and three replicas. The Master is also set to be the Windows Primary Domain Controller. But none of the replicas can join the domain or join as the Backup Domain Controller.
When I search the logs on the Master, I see:
could not find new user/computer luca$ in passdb
luca (a replica) is in Workgroup Manager. I even added a Kerberos entry for it.
Any help is greatly appreciated.

Solved my own problem...
Turns out that some users on the network took it upon themselves to join a Workgroup with the same name as our Domain. Samba doesn't seem to like that at all. So make sure your workgroup names are never the same as your domain names.

After a successfull install, I can not launch oracle DB XE

hello,
I installed oracle db XE 10.2.0.1.0 on a centos 6.2 (~redhat) but I can't start it.
I succeeded in launching it after the installation but after a reboot it is not launched (apex on my web browser gives me an error : page not found or similar).
I logged in the oracle account but it didn't worked.
(more infos if you want)
when I enter "su - oracle" in a terminal, I have this :
-bash-4.1$ su - oracle
Mot de passe :
-bash-4.1$ export DISPLAY=new-host-3:0
-bash-4.1$ /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/startdb.sh
xsetroot: unable to open display 'new-host-3:0'
xsetroot: unable to open display 'new-host-3:0'
-bash-4.1$ export DISPLAY=new-host-3:0.0
-bash-4.1$ /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/startdb.sh
xsetroot: unable to open display 'new-host-3:0.0'
xsetroot: unable to open display 'new-host-3:0.0'
-bash-4.1$ export DISPLAY=:0.0
-bash-4.1$ /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/startdb.sh
No protocol specified
xsetroot: unable to open display ':0.0'
No protocol specified
xsetroot: unable to open display ':0.0'
-bash-4.1$ export DISPLAY=:0
-bash-4.1$ /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/startdb.sh
No protocol specified
xsetroot: unable to open display ':0'
No protocol specified
xsetroot: unable to open display ':0'
and with my account (in which xclock works) :
[olivier@new-host-3 ~]$ /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/startdb.sh
[olivier@new-host-3 ~]$
...seems ok yet the cursor appears only one second after the entering of the command, and the database does not have the time to be launched.
can you help me?
I can give you more informations if you want.
thanks,
olivier
Edited by: 895233 on 30 janv. 2012 12:06

Hello
thanks!
I tried the commands you gave me and here is the result :
[olivier@new-host-3 ~]$ su - oracle
Mot de passe :
-bash-4.1$ . /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
-bash-4.1$ lsnctl start
-bash: lsnctl : commande introuvable
-bash-4.1$ whereis lsnctl
lsnctl:
-bash-4.1$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-JANV.-2012 23:32:49
Copyright (c) 1991, 2005, Oracle. All rights reserved.
TNS-01106: Le processus d'écoute LISTENER a déjà été lancé
-bash-4.1$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Lun. Janv. 30 23:33:00 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect /as sysdba
Connecté.
SQL> startup;
ORA-01081: impossible de lancer ORACLE déjà en cours - fermer d'abord le thread
SQL> exit
Déconnecté de Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
-bash-4.1$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-JANV.-2012 23:33:57
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connexion à (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUT du PROCESSUS D'ECOUTE
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Date de départ 30-JANV.-2012 18:20:03
Durée d'activité 0 jours 5 heures 13 min. 54 sec
Niveau de trace off
Sécurité ON: Local OS Authentication
SNMP OFF
Service par défaut XE
Fichier de paramètres du processus d'écoute /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Fichier journal du processus d'écoute /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Récapitulatif d'écoute des points d'extrémité...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Récapitulatif services...
Le service "PLSExtProc" comporte 1 instance(s).
L'instance "PLSExtProc", statut UNKNOWN, comporte 1 gestionnaire(s) pour ce service...
La commande a réussi
-bash-4.1$
it's in french, but you can see there is nothing about the HTTP port... and apex does not work.
could you help me, or tell me where it could come from?
the best thing I could do would be a script which would be launched at the startup of the OS.
olivier

Oracle.jbo.domain.Number to int and back

I have a database field that comes back as a oracle.jbo.domain.Number.
I want to increment this by one so was trying to convert it to an int, apply the increment then turn it back into a number.
2 questions :
1) Can I increment oracle.jbo.domain.Number directly
2) If not how to I turn it to an int and back
Many thanks,
Richard

Convert oracle.jbo.domain.Number to int with the intValue method.
oracle.jbo.domain.Number var;
int intValue=var.intValue();Convert int to oracle.jbo.domain.Number with the Number (int value) constructor.
int intValue;
oracle.jbo.domain.Number var=new oracle.jbo.domain.Number(intValue);

Default Domain Controller Policy

Hello All,
We will be starting promotion of Windows Server 2012 R2 Domain Controller in our organisation. For that we are trying to implement the Default Domain Controller Policy for 2012 r2 related.
We already have Account Policies, Password policy, Audit Policy and Security Option Firewall Settings
But would like your advice about any new features which we can applied in our Default Domain Controller
policy.
Thanks.
Thanks HA

Hi,
>>But would like your advice about any new features which we can applied in our Default Domain
Controller policy.
Regarding this point, the following articles can be referred to as reference.
Chapter 4: Strengthening Domain and Domain Controller Policy Settings
https://technet.microsoft.com/en-us/library/cc773205(v=ws.10).aspx
Applying Selected Domain and Domain Controller Policy Settings
https://technet.microsoft.com/en-us/library/cc773164(v=ws.10).aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Adding second domain controller in Windows server 2012 R2

Hello, our primary domain controller is currently on a machine that has Windows Server 2008 R2 Standard. We are planning to setup a second domain controller as a failover to our primary domain controller. My question is, can we have a secondary domain
controller on a Windows Server 2012 R2 even if our primary domain controller is on a machine that has Windows Server 2008 R2?

I think I found the answer to my question.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx
"In Windows Server 2012, Adprep.exe is integrated into the AD DS installation process and runs automatically as needed. For example, when you install the first domain controller that runs Windows Server 2012 into an existing domain and forest, then adprep
/forestprep and adprep /domainprep automatically run and report the results of the operations.
Some organizations may prefer to run Adprep.exe separately in advance of an AD DS installation. For this reason, Adprep.exe is also included in the \Support\Adprep folder of the operating system disk.
In Windows Server 2012, there is only one 64-bit version of Adprep.exe. It can be run remotely from any server that runs a 64-bit version of Windows Server 2008, Windows Server 2008 R2, or Windows Server 2012. The computer where you run it can be either
domain-joined or in a workgroup.
The version of Adprep.exe in Windows Server 2012 includes new syntax and parameter options in order to run it remotely. For more information, see
Adprep."
For more information about the objects and containers that are created when the schema is extended to support Windows Server 2012, see
Windows Server 2012: Changes to Adprep.exe.

Can Hyper-V host join a domain of a virtual machine domain controller on that same host?

Learning about Failover Clustering with Hyper-V. I have two hyper-v nodes(servers). I want to add them to a failover cluster, but it said that the nodes must be in a domain to join failover cluster.
Can I create a domain controller role on a virtual machine hosted on that same node and join that node to the domain?
Can I just create a role on one of the two nodes along with hyper-v role and join the second node to the domain?

You can create
an AD VM and join the Hyper-V host to it in Server 2012 (or Hyper-V Server 2012, the preferred OS for running a Hyper-V Cluster). This did
not work in any previous version of Windows.
This would be a really horrible idea for a production environment, but suitable for a lab/training.
Also, you only need one host/node to form a cluster (though it probably throws errors/warnings if you do)

Windows Server 2012 Foundation, in a Workgroup - "The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller"...

Every few days we see two dialogs with the following messages:
Dialog 1, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
Dialog 2, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
down in 8 day(s) 23 hour(s) 0 minute(s).
The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
adapter properties.
I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
not an option for this scenario.
I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
DNS server configured.
I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.

Thanks for your response Vivian.
I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
never displayed these messages.
The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
There are only 2 user accounts configured on this server. The local admin account and another local admin user.
The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
server will shut itself down again in 3 days.
The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
on its new network and this is what is triggering the messages?
Am I clutching at straws here?

Issue with Installing Oracle 10g R2 on a Windows 2008 Domain Controller

I'm assigned a evaluation task for my company. The task invoke to install oracle in my Domain Controller Server.
I got "ORA-12560: TNS:protocol adapter error" when I installed ORACLE 10g R2 for Win2K8 on my Windows 2008 (a Domain Controller Server). It happened in the create predefined database period.
I tried to google and noted that there are some RUMOS say "We cannot deploy ORACLE on a Domain Controller, It's impossible"
Is this true? Please, Please advise!
Thansk,

This is a link to a same issue
Creating instance oracle 10.2.0.4 on Windows 2008 32bit

How can i compare: java.util.Date oracle.jbo.domain.Date?

I have made a ViewObject wich contains a date column.
I want to check if this date is smaller/greater than sysdate:
i get following error:
Error(45,24): method <(java.util.Date, oracle.jbo.domain.Date) not found in class Class4
code:
SimpleTimeZone pdt = new SimpleTimeZone(-8 * 60 * 60 * 1000, ids[0]);
// set up rules for daylight savings time
pdt.setStartRule(Calendar.APRIL, 1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
pdt.setEndRule(Calendar.OCTOBER, -1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
// create a GregorianCalendar with the Pacific Daylight time zone
// and the current date and time
Calendar calendar = new GregorianCalendar(pdt);
Date trialTime = new Date();
calendar.setTime(trialTime);
(VO_ULNRow)singleRow = null;
while(vo.hasNext()){ // ViewObject vo;
singleRow = (VO_ULNRow)vo.next();
if(calendar.getTime() < singleRow.getEO_ULN_BORROWFROM()); //singleRow returns oracle.jbo.domain.Date
etcetera
how can i compare those 2?

Hi,
oracle.jbo.domain.Date has two methods which suit your needs
longValue() which returns a long (though I'm not sure if returns a long comparable to the long returned by java.util.Date)
and dateValue() which returns a java.util.Date
I hope it helps,
Giovanni

Java.util.Date oracle.jbo.domain.Date how can i compare?

I have made a ViewObject wich contains a date column.
I want to check if this date is smaller/greater than sysdate:
i get following error:
Error(45,24): method <(java.util.Date, oracle.jbo.domain.Date) not found in class Class4
code:
SimpleTimeZone pdt = new SimpleTimeZone(-8 * 60 * 60 * 1000, ids[0]);
// set up rules for daylight savings time
pdt.setStartRule(Calendar.APRIL, 1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
pdt.setEndRule(Calendar.OCTOBER, -1, Calendar.SUNDAY, 2 * 60 * 60 * 1000);
// create a GregorianCalendar with the Pacific Daylight time zone
// and the current date and time
Calendar calendar = new GregorianCalendar(pdt);
Date trialTime = new Date();
calendar.setTime(trialTime);
(VO_ULNRow)singleRow = null;
while(vo.hasNext()){ // ViewObject vo;
singleRow = (VO_ULNRow)vo.next();
if(calendar.getTime() < singleRow.getEO_ULN_BORROWFROM()); //singleRow returns oracle.jbo.domain.Date
etcetera
how can i compare those 2?

i get following error:
Error(45,24): method <(java.util.Date,
oracle.jbo.domain.Date) not found in class Class4
if(calendar.getTime() <
singleRow.getEO_ULN_BORROWFROM()); //singleRow returns
oracle.jbo.domain.Date
how can i compare those 2? You cannot compare these two values directly. You must convert the oracle.jbo.domain.Date object to a GregorianCalendar object. Something like:
oracle.jbo.domain.Date dt = singleRow.getEO_ULN_BORROWFROM();
GregorianCalendar gc = new GregorianCalendar(dt.getYear(), dt.getMonth(), dt.getDay());
if (calendar.getTime() < gc.getTime())
}

Can't delete defunct domain controller

I'm the admin of a software test lab. I had an Active Directory (Windows 2008 r2) domain set up mainly for DNS use on two Hyper-V VMs on separate hosts. I have had issues in the past after power outages (I don't have the budget for a UPS for
these hosts) where one or the other domain controller would become corrupt, and restoring from backup simply wouldn't work. So, I got used to rebuilding whichever one failed. I've had to do it about a dozen or so times, but when we had a power
outage last Thursday, circumstances changed.
The first DNS server came back up just fine, but the second got corrupted, again. (Pretty typical issue. It would only boot to the recovery console. Trying to use chkdsk /f would result in it telling me there were only 44 files on the C:
drive and nothing to fix.) I tried to restore it from backup, but, as usual, the host claimed it couldn't read the restore, so I deleted the VM and started over. I created a new VM and got the OS installed and updated, but I can't delete the old
DC account from the users and computer console or the config from the sites and services console. Everything tells me "directory object not found." I wound up renaming the VM and rejoining it that way, but I still can't get that old account
deleted.
What's worse is that this VM that failed was the global catalog, and AD won't let me reassign the GC role to another DC. It just doesn't do the role assignment, no error message or event log entry at all.
Anyone else run into this? Is there a fix?

Is this the link?
http://msmvps.com/blogs/acefekay/archive/2010/10/05/complete-step-by-step-to-remove-an-orphaned-domain-controller.aspx
When you try with the GUI (possible since Windows 2008), is there an error message?
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Can I monitor the users who are logged in Domain Controller?

Can I monitor which users are logged in the Domain Controller? Is there any features or hidden in Windows Server 2008 R2?
it may be funny.but i just want to know.
Thanks in Advance

I am using a bat script assigned on the user Logon, this script will send you a notification each time user login
User Configuration --> Windows Settings --> Scripts (Logon/Logoff)
download the exe from here and save it to shared folder(\\server\folder\)
http://caspian.dotconf.net/menu/Software/SendEmail/
(make sure to save it as a .bat)
\\server\folder\sendEmail.exe -f [email protected] -t [email protected] -u User Logon -m User %USERNAME% has logged onto %COMPUTERNAME% on %DATE% at %TIME% -s smtpserver.mycompany.com:25

How to get oracle.jbo.domain.date from page to controller

Hi All,
I want to get date from my Advanced table bean to Controller. I am getting date as java.sql.Date i want to convert it to oracle.jbo.domain.Date. Any pointers in this will be helpful.
Thanks in advance.
With Regards,
Anjani.

get your date through ViewObject, you will get it in jbo.domain.date format
vo.next().getAttribute("DateAttributeXXXX");
--Prasanna

Can't Launch Oracle 9IFS Domain Controller

Similar Messages

Maybe you are looking for