Can't launch PSE 11 Organizer from Welcome Screen

I was trying to see if there was an easier way to scan my photos directly into PSE 11. i found this on the Adobe site. http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html (See Windows 64 bit) I went into the Program File... Optional Plug-In and right clicked and copied. Then I went to the Program File... Plug In file and was going to copy it but didn't. I really didn't know what I was doing so I stopped and closed out of the Program Files. I was able to scan my files on my Epson scanner and get them into the Organizer without doing this.
I can't remember if I had the Organizer open at the time I was doing the above or opened it afterwards. Anyway I was scanning and organizing, backed up my pictures on a flashdrive and all was good and closed the Organizer. I then connected an External hard drive I hadn't used for a while to see what photos were on it. Then I went to open the Organizer as I wanted to do a backup on the External hard drive. Now as stated above, I can't open the Organizer from the Welcome Screen or from the Editor.
Did I screw something up from what I was doing in the first paragraph or what. Help!!

See if this link helps:
http://psekb.blogspot.in/2013/03/pse-organizer-is-not-launching.html
Regards,
vaishali

Similar Messages

PSE8 winxp Can't start Organizer from welcome screen

I click on organizer in welcome screen and the welcome screen goes away and organizer screen doesn't show. There is an icon on the taskbar indicating the status of Backup/Schronize which says that is is on 164 of 839 photos. A few minustes later it was updated to 179 of 839. Also although I paid for addional space the screen says that it is updated 0-2 G instead of 22G. I can't get to Editor either from Welcome screen. I thought backup was in background and shouldn't affect me running Organizer.

Organizer should get launch even though the Sync is running in the background. Was the PhotoshopElementsOrganizer.exe running in task manager when you face this issue ?
~Sourabh

IPad Air: Can't launch Safari or YouTube from the link in emails. Any idea?

Can't launch Safari or YouTube from the link in emails. Any idea?

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

How can I move an icon/file from one screen of my ipad to another?

How can I move an icon/file from one screen on my ipad to another?

Press and hold the icon until they start to wiggle. Then while holding it, drag it to the edge of the screen and wait for the page to switch, then let go of the app

Edit and organization not open from welcome screen!!!??

i have problem setup Adobe Photoshop Elements 9 and no any problem in the setup when i open welcome screen i click on the edit or organization it's make loading and nothing so i go to source folder .
when i go to source folder i try to open PhotoshopElementsEditor.exe file it give me message say" unable to continue because of hardware or system error.sorry,but this error is unrecoverable". what i must to do i have win7 and 1.9Gb Ram and 700MB Graphics Memory and processor pentium dual-core 2.20GHz

I DO IT MANY TIME'S BUT I CAN OPEN ORGANIZER FROM THE SOURCE FOLDER AND I TRY DO ANY THING TO OPEN EDIT FROM THE ORGANIZER
BUT ....NOT WORK

Can't launch PSE 7

Why would I not be able to launch PSE 7 after installing from a purchased CD? (No error msg)
(thread title edited by forum host)

Thanks for getting back. I'm running Windows XP on a desktop PC and Windows 7 on a laptop. I bought the PSE disk new about 2009 from Walmart for my laptop. It worked fine there (Windows 7) for a couple of years but now won't launch. I used an older PSE version on my PC until trading recently but after what appeared to be a successful installation of PSE 7 it will not launch there either. The hour glass appears briefly and then disappears when I try to launch from either the desktop or from windows explorer. So no PSE on either the laptop of desk top PC now. If I remember correctly, I installed Norton Anti-virus after the PSE 7 installation on both...are there compatibility issues? I hadn't associated the two as a problem for PSE.
Nick Ide

[SOLVED] pekwm - can't launch certain applications outside from termin

I'm currently using pekwm and I'm experiencing a strange issue.
I can't launch certain, random applications by keyboard-shortcut, the pekwm-command-launcher, the start file (pekwm start file and .xinitrc) and the menu.
But it works if I open a terminal and launch the application there.
The applications that don't open include chromium, tint2 and mpc.
Does anybody know how to make these applications launch everywhere?
Last edited by x0rg (2010-08-08 11:19:01)

I couldn't get tint2 to work at all in PekWM. I hope a PekWM guru takes notice of this thread...

Photoshop Elements 8 crashes when "EDIT" opens from Welcome screen

When Photoshop Elements 8 is launched from the shortcut on the desktop, welcome screen opens and at the bottom it shows "gathering user info....". It keeps doing it as long as I don't click on edit button. When I click on edit button, the edit windows opens with my name and soon it crashes and closes the program. After the program closes, it opens a crash report window which I submitted to Adobe three days ago. I am still awaiting for the response. Sometimes, instead of closing the program, it crashes my computer and a blue screen shows up. In this case, I have to shut down the computer and restart again.
I thought I can reinstall the proram but this software would not allow me uninstall either. When I click on "remove" button on the program in the control panel, a window pops up with a message " this action is only valid for products that are currently installed".
Any help from Adobe technician is highly appreciated. Thanks in advance

Following could be the possible workarounds :
1)      On the drive on which you have installed PSE,on my machine it is on C:
         Go to c:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
            Now launch PSE and check if it works.
2) Try resetting the PSE preferences by
   1. Close Elements.
   2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Edit.
   3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
3) In case any network printer is attached try to launch without network or printer uninstall.

Crashing if opening from welcome screen

Hello,
I have this issue pretty often. I will open Premiere Pro CS6, select the project(Project A), it loads and opens the premiere screen. The media is currently yellow at this point and then it crashes. Sometimes premiere crashes at a different point, such as before I see the yellow media screens. However if I open premiere and open a new project, or a less intense project(Project B) that doesn't have any effects - that project loads. Then once inside premiere I can open the project(Project A) that was previously crashing. But to add more mystery, if I get project A to load using that method and then close premiere. Open premiere to the welcome screen and try loading Project A again, instead of it crashing with a crash report and no prompt, I get the prompt "Premiere pro has encountered a serious error and will attempt to save your project." All of these seem to happen if opening the project from the welcome screen. And this has happened on two different projects.
To give a little background on the projects, they are multicam projects - I am unsure if that has an effect. And the crashing only seems to happen on projects I have applied effects to. Typically just 3 (2x three-way color and RGB Curves) effects per clip.
Lastly: this might be completely unrelated, I have gotten the corrupt project file 2 or 3 times now. These have all happened randomly where I have worked on the project for an hour or so, save it - and close everything down safely. Come back the next day and it's corrupt. I've started to just save all my .proj files to dropbox to combat this. But this amount corrupt projects and crashing when opening projects is frustrating.
I have reinstalled premiere as well. I have deleted my preferences and I have started premiere holding combinations of Shift, Alt, and Control.
Here is a crash report I get after recieving the prompt "Premiere pro has encountered a serious error and will attempt to save your project." If you need a crash report where I don't recieve that prompt at all, I'm sure I can get it to crash again lol.
http://pastebin.com/MWUzBTn6
Here is a crash report from when the program crashes with no prompt :
http://pastebin.com/BN6QNMib

What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).6.0.2
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)Yes
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".10.8.2
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".Apple ProRes (Proxy)
If you are getting error message(s), what is the full text of the error message(s)?Multiple Error Messages, See above
What were you doing when the problem occurred? See Above, Full Description
What other software are you running? These errors occur when running other software or just freshly booting into the machine
Do you have any third-party effects or codecs installed? None
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).iMac (Late 2009), 3.06 ghz Intel Core2Duo, 8GB DDR3 1066mhz Ram, nVidia 9400 256mb, 500gb HD. No third part hardware
Are you using Mercury Playback Engine GPU Acceleration? I believe so
Does the problem only happen with your final output, with previews, or both?No
Here is another crash from recently. I can pretty much make Premiere crash whenever I want. For example if I just switch back and forth between a project (Without changing a single thing), it will cause the "A serious error has occured, we will attempt to save your project". This is an error report from that.
http://pastebin.com/6B7eUhia

Installing PSE 11 on new computer. How do I bring PSE 10 organizer from old computer?

I purchased a new laptop. Yay me! I want to install PSE 11 on the new computer. I have PSE 10 on my old computer. How do I bring the organizer for PSE 10 to the new computer without installing PSE 10 on the new computer?
Thanks for any help!

What you need to transfer is the catalog, not the program.
The correct way to transfer it is to create a backup from your old computer on an external media (external USB drive for instance). That will save your catalog and the catalogued picture files in a format that PSE11 can read to restore both pictures and catalog on the new PC.
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
You have to run the backup from the old computer and the restore from the new one. In a first stage, all your pictures will be recovered on your new PC, then the PSE10 catalog will be converted to the PSE11 format automatically.

How can I launch an external app from a keynote presentation?

I'm trying to launch a Prezi presentation ("Prezi.app") from a keynote presentation, but don't know how to do it.
Links in keynote can only refer to websites or slides within the presentation, but not to start another App, like in - I hate to say it - Powerpoint.
Any ideas?
Thanks
Juergen

Keynote is specifically prevented from opening applications.
In Keynote 09 (the previous version), hyperlinks can:
Jump to a slide in the same presentation
Open a webpage in the computer’s default web browser
Open another Keynote document
Open an email message
Exit the slideshow
in Keynote 6 (the latest version) hyperlinks can:
Jump to a Slide in the same presentation
Web page
Mail opens a pre-addressed email message
Exit the presentation

How can I move PSE 7.0 from one computer to another without a disc?

I had PSE 7.0 on an old laptop. I bought a new one and cannot find my old installation disc. How can I move it from one PC to another? I have not been able to get to the Adobr support center.

You do not want to move Adobe applications between machines. Download and install the application.
PSE 7, 8, 9 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html

How do I stop PSE 13 organizer from quitting unexpectedly when working with the PSE editor

Every time I'm working in the editor I get the error message "the organizer has quit unexpectedly" I have uninstalled and reinstalled as per chat supports recommendation with no improvement. I have studied the Adobe support information and don't see anyone else having the same issue. Would love to hear from someone who may have an idea for me! Thanks in advance

Hi,
Please give the instructions mentioned in the article: http://helpx.adobe.com/elements-organizer/kb/organizer-crashes-launch-does-not-start.html
a try.
Thanks,
Anwesha

Can you launch an android app from an android app built with air?

Hi I might a have project coming up soon where one of the requirements is that the android air application can launch another application on the device...
In pure java this would look something like this....
Intent LaunchIntent = getPackageManager().getLaunchIntentForPackage("com.rpg.rbar");
startActivity(LaunchIntent);
Does anyone no if I can perform a similar method using as3
Thanks
Aidan

Try the below. Found this at the below link.
http://www.blogbyben.com/2013/04/launching-android-app-from-adobe-air-app.html
var url:String = ("intent:#Intent;" + "action=android.intent.action.MAIN;" + "category=android.intent.category.LAUNCHER;" + "component=com.android.settings/.Settings;" + "end"); navigateToURL(new URLRequest(url));
Question I have is, is there any way to get a list of currently installed apps?

PSE 12 - Can't open catalog - some internal programming error. Can NOT open PSE 12 organizer

Can not pass Catalog manager - Can't open catalog - sez an internal programming error occurred?????

Yes, it seems like a problem with the main catalog. I haven't seen a failed conversion before that didn't write a conversion log. So there aren't many clues to go on. I have just one more suggestion -- run the utility psedbtool on your PSE 6 catalog:
http://www.johnrellis.com/psedbtool/
Because you have both PSE 6 and 8 installed, you'll have to run it specially:
1. Start PSE 6 and do Help > System Info to find the folder path of your PSE 6 catalog folder.
2. Start a command prompt.
3. Type these two commands:
cd c:\psedbtool
.\psedbtool -printVolumeTable > output.log
4. Copy and paste the contents of c:\psedbtool\output.log here.

Can't launch PSE 11 Organizer from Welcome Screen

Similar Messages

Maybe you are looking for