Can't leave voicemail for users on some servers but not others

We have 3 Exchange 2010 servers and 3 Exchange 2013 servers (we are in the process of moving everyone over to Exchange 2013.)
When we enable UM on a mailbox that is on one of the Exchange 2013 servers, everything works. However when we enable UM on a mailbox on the other 2 servers, we receive the message "sorry, you have
a mailbox that is not supported by this unified messaging server."
We've re-checked the dial plans, gateways, etc. and are completely stumped. Any assistance or pointers would be greatly appreciated.
Thanks,
Robert

Can you describe your architecture in detail?
Are the 2010 Mailboxes UM enabled? What are you using for the "phone system"? Lync? Something else?
Are you moving over Um enabled mailboxes or only UM enabling once move to 2013?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

My iPhone4 docks correctly with some devices but not others, please help!

Hi,
Firstly spologies if this is old news but sometimes its easier to 're-ask' than trawl thousands of pages!.....
I have a 3-year old iPhone 4 that has developed a problem which i'm trying hard to solve;
*Phone used to dock fine with anything and everything - this was about 1 year ago.
*for no apparent reason it ceased docking with my Bose Soundock and a Logic3 accessory dock (connected to a hi-fi) at home
*symptoms were; it would charge and operate as normal whilst docked but would not play music through either (the Logic3 dock did not acknowledge it was docked). Otherwise it would sync and connect normally with iTunes, etc. and connected fine when plugged into my car.
*I reset it, restored it from back-up, updated/reinstalled iOS (this has since updated at least twice) with no other effects. Also checked and reset all settings.
*I subsequently bought a Pure Contour dock as I was able to try it in the shop and my phone worked with it, plus it has Airplay anyway. I have since, in an attempt to find a bedside DAB radio/alarm dock that works with it, found that it works fine with some devices but not others with no rhyme or reason as to which.
*2 days ago I changed out the docking port myself using a cheap replacement bought from Amazon, to see if it would cure.
* now the problem is reversed! The Bose and Logic3 docks I have, that it wouldn't work on before, it now DOES....and the Pure dock and my car, which it DID work with before now fail to connect with it!
*just to reiterate this, my wife's gen3 and gen5 iPods dock and work faultlessly with all devices mentioned....and mine had done previously.
to my knowledge it is NOT;
- a compatibility issue. The phone used to work fine on everything I had. Then it stopped. How's that?!
- a connector issue. The male connectors on all docks haven't changed.......and the female connector in my phone has changed from liking selected devices to then liking the others!! (it is female after all ;-) !)
-a software issue. iOS has been updated and the phone wiped and restored and all sorts so many times I can;t see how it can be!
could it be a problem with the data exchange between phone and device when it is docked??
or do I really need to try changing the port for an 'official' one??
or is it just broken and that's that?!

It's either a problem with the connector on your phone (dirt, lint, bent pin, corrosion) or with its connection to the motherboard inside. Cleaning the connector is a good place to start; either a dry toothbrush, air blast can or wood toothpick. Next inspect it carefully with a good magnifying glass or jeweler's loupe. If nothing turns up it is probably damage inside, which will be difficult to fix. Aren't you due for an upgrade about now? Your iPhone 4 is 3 generations out of date!

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Why does new 60g ipod download some songs but not others?

I have a lovely new ipod and have inherited my son's itunes library on my XP user account. I removed all the stuff of his that I didn't want and was all set to download 600-odd tracks on to my new ipod. Unfortunately it only transfers about a third of the tracks on each album and unaccountably skips some altogether. Also, it will only transfer 50 or so songs and then "freezes" on a particular track. I then have to close down using Windows Task Manager, re-start the computer and delete the track in question before the repeating the whole miserable process. There must be a better way mustn't there?

Thanks for the suggestions, but I ran updater and installed the latest itunes yesterday to no avail. Also I think it's unlikely to be an unsupported file type problem as some tracks and not others are transferred from the same album.

Podcast has downloaded for some people but not others

hello
i have an established podcast we have been running for 3 years now. We've just reached our 54th episode and after i uploaded it the podcast it went through to the itunes store... i refreshed my podcast directory and it didnt download to my imacs itunes it also didnt download to my laptops itunes BUT it has downloaded to other subscribers. Ive asked a few people and some have the podcast others dont, the server may have gone downwehn i uploaded it but since then ive deleted of our website and server and reuploaded and i still have the same problem. the podcast is on our website fine and the direct download link is working... its in the itunes store and you can listen to it through the store on itunes but it doesnt seem to be downloading to everybody who has subscribed
i really cant work out what has happened here?
some people have tried subscribing from fresh and it seems to work for them, its just so random!?
episode 54 is the issue. we havent uploaded anymore since as were worried it wont work again but are now getting a backlog of podcast and really need to get them out asap
heres the link to our podcast in itunes> http://itunes.apple.com/gb/podcast/louche-podcast/id318794737
the podcast on our website> http://www.louchemusic.com/podcast/Bicep/
if you need any more info or links to figure it out please let me know?
any help would be massively appreciated!!
thanks : )
Brinsley

It works perfectly well for me, both in the Store and in iTunes when subscribing, so I can't see any reason why it shouldn't work unless you server is sometimes failing to answer requests, or is sometimes so slow that iTunes is timing out.
Your feed is at
http://www.louchemusic.com/wp-content/themes/Louche/rssfeed/louchepodcast.xml
There's nothing in the feed to cause this problem, but it doesn't contain the 'iTunes declaration' at the top or any itunes tags: so though it takes the information from the 'description' tag you will get no image (there is no 'itunes:image' tag) - as you've been running OK for three years you may not feel bothered about this.

Thunderbird "eating" emails on some accounts, but not others

Greetings.
I'm currently playing tech support for my mother, who has been having issues with Thunderbird that I can't wrap my head around.
She has numerous email addresses all connected into Thunderbird. However, recently two of them have decided that once an email comes in, after a random period of time it will delete that email, removing it from existence entirely.
I tried moving a spam email (which is automatically moved to the trash) from the trash, into the inbox, but by the time I got to the inbox to check how long it lasted, it had disappeared into nothingness. It hadn't moved back into the trash, but instead was jut removed.
Considering one of these accounts is a customer support account, it's kind of important to be able to view emails for longer than the 15 or so seconds they're allowed.
I've gone through the settings/properties for Thunderbird and both accounts but was unable to find anything obvious that could be causing this.
Any and all help on this matter would be appreciated.
Thanks in advance,
All best.

http://kb.mozillazine.org/Disappearing_mail

My hp 1660 will print some websites but not others

my new hp 1660 prints off of some websites but there are many that will not print. What can I do to correct this and be able to print everythin I want to

It seems to be accessible, yes. It's listed as
HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.9\CLSID. I can give
you the data string if you like. I've really never edited my system
registry so I'm not sure what I'm doing.

How do I get all of the music on my computer to transfer to my Iphone? For some reason, itunes has picked up some songs but not others. example, I have several CD's loaded in which only 1 or 2 songs from the CD shows up in itunes.

I have about 70 Cd's loaded on my computer as I had previously owned another MP3 device before I got enamored with the Ipad and Iphone. My problem is itunes will not recognize all of this music. To give a specific example, I have an old Bon Jovi Cd "crossroads" , itunes only recognizes 2 songs off the Cd. How can I get itunes to recognize these songs? They do not show up on itunes anywhere but if i go to my music folder I can locate the songs and it even shows the itunes logo but, the songs will not play with itunes. I've got a few hours of music i would like to have on my iphone. Can anyone please help me with this?

It has always been very basic to always maintain a backup copy of your computer for this very occasion.
Use your backup copy to put everything on the computer, then sync.
If for some reason you have failed to maintain a backup, not good, then you can transfer itunes purchases from your iphone to your computer - File>Devices>Transfer Purchases

Hidden comments for users of Word 2013, but not earlier versions

I have a Word document that was probably originally created with Word 2000. We continuously work with this document and have made many changes over the last 15 years. We've made changes to the document using Word 2003, 2007, 2010 and 2013.
Now, when users of Word 2013 use the document, most of the comments do not appear in balloons. A few of the comments do appear in balloons. Users of earlier versions of Word see all of the comments in balloons. All users can see all comments in the
reviewing pane.
Show Markup is set for display of all information. I.e., there are checkmarks by "Comments", "Ink", "Insertions and Deletions", "Formatting", "Balloons/Show Revisions in Balloons", and "Specific People/All
Reviewers".
We had been saving the document as a Word 97-2003 Document. I converted it to a "Word Document" and the behavior is the same.
Thanks.

Try this in Word 2013: Copy the document content, minus the final paragraph mark, into a new file. Does that make a difference?
Stefan Blom, Microsoft Word MVP

Why does Proxy Authentication prompt for user/pass on Win7 but not XP?

Trying to use NTLM authentication for our proxy through Firefox 7.0.1. It works great in Windows XP - the user doesn't ever get prompted for his username or password when going to the internet. However, when using the same settings with Windows 7 machines going to the same internet sites, they always get prompted for username and password. Is there a workaround for this? Is this a bug?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Can video chat with Aim users on a PC but not with Ichat users on Mac!

Hello
I am having the odd problem of being able to video chat with someone when they are using their pc running aim, but I cant chat with the same person when he on his Mac!
I am running as DMZ behind a Linksys WRT54G wireless router.
The problem is on my side because I cant chat with the test accounts either.
I tried this after bothe forwarding and triggering all the ports that were suggested.
I am stumped!

Hi Lullah,
This is going to be down to the Staelite connection.
It has what is called latency.
This adds an unexceptable delay in the passing of data at the start of the connection.
Very few people have reported success.
The things you can try are to fool the link into passing more intense data prior to starting a chat.
If you have web pages try uploading a Pic of larger file to the site.
Just as this finishes start up iChat
You should also check that System Preferences > Quicktime > Streaming tab has the speed to match you download set.
Hopefully (But no reported success) you may get iChat to see more bandwidth as you have just had the modem busy.
Following the launch of iChat with a video chat request may be able to get that bandwidth.
Realistically the 128 k upload even if you were getting close to it is very tight to the lowest point Apple say will work.
Speed testing a 128 k service i likely to get a result of about 80% of the figure (102k) iChat will use about 80 % of what is left (you are down to about 83K). You are now below the 100k min.
With regards to your LAN there are several things that may help if not set up already.
Only have one device doing DHCP. The way routers work as compared to modems is that they pass all routing data though to the computers.
This means the computers can be sitting in two subnets (1) from Modem to computer via router and (2) from Router. The computer can only display one of these IP addresses but can get confuse info regarding iChat.
Do not use Port Forwarding or Port triggering, twice or together on the LAN. iCHAT does not like two lots of NAT (bath are forms of Network Address Translation [NAT]).
Use UPnP where you can.
IF you are trying to test this yur Mac to your PC you ahve to allow for the fact that the modem is handling two Video chats in effect. This means you need twice the minimum bandwidth (let alone the fact that ichat to AIM semms to like 50% more than Mac to Mac contacts.
Sorry to be the bearer of so much doom and gloom.
11:03 PM Tuesday; March 28, 2006

Why does my iPad recognise some contact names but not others I can send some messages but not others

When I try to send messages some names are recognised and some are not

If you are talking about iMessage... It will send messages to people that are using ios5, and have turned I message on on their device. For your other contacts, you need to send a good old fashioned e mail.

Flash works in some places, but not others....

It seems my problem has changed from what I origonally thought it was. I thought my flash player didn't work at all. Mainly because I typically use it for one thing, and that one thing wasn't working (photobucket). After trying to uninstall flash, reinstall it and getting the "getPlus+(R) installation corrupt error", I did some more reading and research.
I followed this link - www.adobe.com/software/flash/about - and it says I have ver. 10,0,32,18 installed. So that is good, it's installed but it still doesn't work everywhere.
I've tried youtube and it works just fine.
The problems I am mainly having is with Photobucket. When I go to my own Photobucket acct. and play a video from my acct. it works but it is painfully slow to load. I might wait up to 2-3 minutes for one of my own videos to load so that I can watch it. This never took more than 10-20 seconds to load before.
Now when I follow a link posted on a forum that is a video link from another persons Photobucket acct. is where the real problem is. It won't play at all. The player loads, but the screen freezes with the first image of the video. The taskbar shows it is still loading, but it never loads. After a few minutes the taskbar shows 'done', but nothing has changed. The video is still frozen at the beginning and it shows me a pause button in the bottom left, like it is playing....but of course it is not.
Also, more often than not, while the video is trying to load the web browser will be "not responding", the computer freezes, and I have to end all tasks and restart the browser. This is really driving me crazy....
I am running Vista Home Premium 64-bit SP1. I used to use IE7. I have now switched to Firefox 3.5, and there is no difference between the two web browsers as far as this problem is concerned.
TIA for any help with this.
Chris

Well, I think there are some big clues here that tell you where you should be pointing.. I haven't read any of your other posts though, so I may be missing something...
" used to use IE7. I have now switched to Firefox 3.5, and there is no difference between the two web browsers as far as this problem is concerned."
"I've tried youtube and it works just fine."
"When I go to my own Photobucket acct. and play a video from my acct. it works but it is painfully slow to load"
Here's what that says to me... you do not have a problem. Flash Player is installed and running. It's Photobucket that has the problem, and that problem lies in their code and/or their network. In this scenario there is virtually nothing we can do for your from the Adobe side of the equation. The fact that both the Flash Player activeX control in IE AND the Flash Player plugin behave the same way indicates to me that this is something Photobucket needs to look into.
So, what can you do?
1. Gather a bit more info. Get a list of similar sites that work fine (Flicker, for example, would be good becuase it's similar)
2. Uninstall Flash Player 10 and get an old Flash Player 9 install from the Archived Players technote:
"Archived Flash Players available for testing purposes" http://kb2.adobe.com/cps/142/tn_14266.html
(This assumes that Photobucket doesn't require Flash Player 10. If they do this step won't work. But if they do not require Flash Player 10, then testing with Flash Player 9 can help tell them if the problem was introduced by changes made to Flash Player 10 that they need to code for specifically)
3. Open a support case with Photobucket
Now, is it entirely impossible that there could be some Flash Player issue here? No, it's not. But it's the kind of issue that Photobucket would have to find, then they work with us directly to address it. Nearly impossible to do from the end user point of view because you have no insight into what their code is doing.

Flash working on some computers - but not others

Good afternoon,
We had a third party flash developer build out the flash
navigation and masthead videos for a client's web site and although
it works fine on my computer (and on the developer's computer), it
does not work on any of the client's computers or my partner's
computers.
Here is the web site in question:
www.quigleysimpson.com/index2.html
According to the client and to my partner, the video cuts out
after a second or two, and some of the navigation links are coming
up 'not found' (e.g. the Multi-Cultural link in the top
navigation).
Upgrading to the latest version of Flash Player was the first
thing we did, and the problem still exists. I can't for the life of
me figure out why.
Any help would be most appreciated.
Cheers,
Cynthia

I understand that neither method did the repairs you are seeking. My post was a side-note information update for you and others who read these posts, that we haven't had to boot from the install DVD to do a Permissions Repair since Tiger (I think)or maybe even Panther (doesn't matter when the requirement was dropped anyway), and that you can actually set some permissions wrong by using the boot DVD because of changes in the OS since it was installed.
For your problem I recommend creating a new temporary Admin user account and seeing if the problem continues in the new account. If it does, then the problem is in the OS, which can be re-installed over the top of your existing installation (without affecting your files in your user accounts). If the problem goes away, then it could be incompatible or corrupted preference files or other incompatible programs in the user account causing the problems. Right now you haven't isolated the problem to either possibility.

Text search returns results with some keywords, but not others

This pertains to a tours website for Turkey. I've sucessfully
set up a search form, and results page which returns results when
multiple keywords are entered. Everything is working well, except
when certain keywords are used. For example, the table column being
searched for is called long_itinerary, so if anyone is interested
in a certain site or city, it's bound to be in the long itinerary
somewhere.
Here's the problem, by example: When someone searches with
the keywords Antalya, Konya, Ankara, or Adana, for example, results
are returned from the database, and those keywords are in each
returned tour's long itinerary.
But certain keywords return nothing, even when they're in
practically all of the tours, in the long_itinerary column. For
example, Istanbul, Ephesus, and Izmir, Kusadasi and Pergamum return
no results, even though they're there. I've gone through all of the
most likely keywords, and these are the offenders. If, for example,
I search with "Istanbul Ankara," I get results with tours including
Ankara (and Istanbul, but only because the word "Ankara" is in the
itinerary).
First I made sure the Charset values were the same on the
search form page and the results page. Still had the problem. Next,
I went into the database itself, and copied the word "Istanbul"
directly from the long_itinerary column of the database, and pasted
it into the search function's text field, and searched again. Same
problem--no results returned.
I can't see any difference between the keywords which work
correctly, and those which don't, what baffles me is that even when
I copy a keyword directly from the database and paste it in the
search text field, it returns no results!
Well, I'm baffled! Any ideas what might cause this?

Hmm -- one of my customers is a turkish building company
(Kusadasi BTW), and when *they* add some contents to the DB,
they´ll be entering turkish chars. It´s in particular the
turkish "I" which is pretty different, and this is when a search
for keywords containing a western "I" will fail.
Could that be the problem in your case ?

Can't leave voicemail for users on some servers but not others

Similar Messages

Maybe you are looking for