Can`t left click and drag clip into timeline..Need advice

Can`t left click and drag clip into timeline, or drag clips around in timeline.
Can insert into timeline from Source Window but can't drag from source window.
Can cut and paste within timeline.
Restarting cs5 doesn`t help, but restarting computer solves problem for a while.
Tried many mouses, but that didn`t help.
Have no idea how I got the name OLD PRO, must have been drinking champagne years ago, because I am a bumbler par excellence!
Message was edited by: old pro

Thank you so much for asking
In the Project Panel a left click highlights the asset but ignores the drag.
In the timeline, a left click highlights the panel and when I try to drag it gives a flicker but that's all.
I can cut and paste in the timeline.
A restart of CS5 has no effect. Restarting the computer solves the problem for a while.
Four different mouses--same problem.
Doug

Similar Messages

  • Can't right click and drag clips anymore?

    I recently started using version 3 and I can't get the right click and drag to work in multitrack view. I can't remember if it ever worked in this version, but it seems like these two things coincided. Am I missing something? Or could this be a different problem? I've checked and double checked, none of the clips are locked in time. All I wanna do is move files around!

    Out of the four possible cursors in MV, you need to use the first one (the Hybrid tool) if you want to right-click and drag.

  • Unable to click and drag clips

    Hi, first time poster, also new to MacBook.
    I started using iMovie and all was well. However recently I am not able to click and drag clips into the project window...very odd... everything else appears to work...I can copy and paste which has other issues which can be avoided by dragging..
    Any help would be appreciated.
    Much thanks.

    However recently I am not able to click and drag clips into the project window...very odd... everything else appears to work...I can copy and paste which has other issues which can be avoided by dragging..
    Drag 'n drop of clips can sometimes have a problem with timing delays in deactivating the Event window and activating the Project window for receipt of the dropped content. Try using the "Add Selection" or delay dropping the content until the Project window is fully activated. If this doesn't work, then you may have an installation, plist, or similar problem.

  • I have created a site with iWeb. I have replaced the iWeb Nav bar with a vertical one I made myself. Problem is, my top button disables itself if it overlaps into the "hidden" nav bar area. I can cmd click and drag it into this area, but then all the rest

    I have created a site with iWeb. I have replaced the iWeb Nav bar with a vertical one I made myself. Problem is, my top button disables itself (and the animation doesn't work) if it overlaps into the "hidden" nav bar area (indicated by a blue rectangle). I can cmd click and drag it into this area, but then all the rest of my site is pushed down the page. Don't know what to do about this. I don't know how to bring the rest of the page up without dragging it also into the designated nav bar area. Also, by doing this, is it affecting my site in ant way? see my site here at www.steveburrowsimages.com
    The home page is with it all draged into the nav bar area and the about page is with is outside the nav bar area (notice that the top button does not animate or work as a button.
    Getting confused here. Anyone got any ideas?

    Well, you made a good start with SEO by getting rid of the iWeb default navigation since it doesn't help the spiders and, out there in the real world, there are more people than you would think with javascript turned off in their browsers.
    One of the downsides of iWeb is that it doesn't allow for the alt attribute in the img tag. Its well worth adding these to give you extra keywords even if you have captioned all your images. Use iWeb SEO Tool for this...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Tags.html
    iWeb, just like most drag and drop software, creates a huge amount of code which causes the pages to load slowly in the browser. Running you files through an optimizer will help to reduce this problem and further reduce the size of image files even beyond the initial optimization you do before loading them into iWeb...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Optimize.html

  • I can not drag clips into timeline with adobe premiere CC

    I can not drag clips into timeline with adobe premiere CC, I created a sequence and still does not work

    See if this works...  2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153

  • Why can't I click and drag photos anymore?

    Why can't I click and drag photos to the desktop to email?

    OK--Think I finally discovered the issue. I'm using a trackball and keyboard setup from Euphonix that communicates with the Mac via Ethernet and TCP/IP. Aperture cannot deal with mouse strokes transmitted this way. If I switch to a USB mouse connected directly to the Mac, the brushes work normally. Still a disappointment since the Euphonix is my default keyboard/mouse and I don't really want to keep a separate USB mouse hooked up.....

  • How do I enable the feature that allows you to left-click and drag cursor left to be same as back button?

    how do I enable the feature that allows you to left-click and drag cursor left to be same as back button?

    Do you mean something like clippings?
    *Clippings: https://addons.mozilla.org/firefox/addon/clippings/

  • My horizontal scrollbar doesn't work. I can't even click and drag it.

    My horizontal scroll bar doesn't work anymore. If there is information on right of the screen I can't get at it using the scroll bar. I can't even click and drag it and clicking on the space between does nothing. The vertical scroll bar works fine but the horizontal scroll bar only works by using my mouse wheel tilt right. The horizontal scroll bar works in IE but not firefox.

    Hello bomb121, probably an extension is the problem, you have lots of extensions !!
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • I try to click and drag music into my story timeline and it will not happen. It will not enter my timeline

    I try to click and drag music from my music from Itunes into my story line and nothing happens. it won't move into the story line

    This is what happened when I clicked on the white empty space:
    BTW can we ad screen capture videos to posts? The only button I have on the toolbar of these posts is an image icon and the video icon appears greyed out. Is there any method I need to resort to to make this icon active?
    Thanks for your helpfulness.
    DR.SOMANNA

  • I can no longer click and drag Safari window to the other desktop.

    I've tried merging all windows and minimizing that single window, then going to the other desktop to open up the window.  That doesn't work--it just opens on the original desktop. 
    When double-clicking on the Safari icon in the dock, the options for desktop appear (none, this desktop, and all desktops).  By clicking on all desktops I am able to go to the other desktop and see my Safari window there, then I can change the option to none again. 
    This is not how it worked before.  I'm supposed to be able to click and drag the window to the other desktop. 
    Any ideas? 
    Update: 
    I pulled one Safari tab out to create a separate window, opened Mission Control, then clicked on the Safari window and dragged it to the small image of the other desktop. 
    The window stayed in the other desktop and now the function of dragging Safari windows to other desktops has returned. 
    Message was edited by: CuriousKathy

    Thanks! I was having the same problem. This resolved it for me.

  • Can't drag clips into timeline (newbie warning)

    I'm sure that this has been discussed previously on this board, but I couldn't find a post.
    Back to my problem: All of a sudden, the current project that I'm working on will not let me drag clips into the timeline. The clips turn to a "lite" color of gray and freeze. I'm brand new to this so a uncondescending response would be greatly appreciated.

    Hi larget2 - this being a very friendly board, it is most unlikely that you will be scorned! We've all sought and been given willing help here from time to time.
    Some more details might be of help in solving your problem:
    How big is your project, and how much storage space do you have?
    What is the source of your clips?
    Is this your first project, or have you successfully completed others?
    How far into the project were you before the problem began?
    Is your project stored on your start-up disk, or on an external drive?
    try repairing permissions (Applications>Utilities>Disk Utility), and with iMovie closed down, trash this file: Users(you)>Library>Preferences>com.apple.imovie.plist.

  • HT1751 when I click and drag itunes into a external harddrive all I get is a icon in the harddrive not the files

    when I click and drag itunes to an external harddrive all I get is a shortcut an icon to itunes not the files the music to itunes
    I am running  windows xp home edition

    I had this problem once and in my case it happenned with music I had not purchased through itunes and also to music that stored in icloud.  Once I brought that music off icloud and into my laptop it resolved most of the issue.

  • Why can't I Click and Drag?

    Yesterday I was clicking and dragging items on my desktop, but today I can't. I can select them but I can't move them. How do I fix this?
    I have a Macbook Pro, 10.5.8

    this just started happening to me.
    OK it looks like force quiting the finder and relaunching it will fix this.

  • Why can't l click and drag a photo from my pictures library to my iphone?

    I am trying to move photos from my laptop to my iphone.  I have tried clicking and dragging individual photos from my picture library to the iphone but l receive a message saying my iphone is not responding.
    I have tried syncing via itunes but when l want to sync a further folder it replaces the one which as already been synced?
    Any ideas?

    There has never been a function to copy anything from an iPhone and paste it to a computer.
    All of your media should be in iTunes already.
    If it is not and was purchased from iTunes, right click on the device and select Transfer Purchases.
    If the media is not in iTunes and was not purchased from iTunes, how did you get it on the device in the first place?

  • Why can't I click and drag clone brush??

    I'm working with a trial version of Aperture and trying to clone out a couple of annoying background details. When I use the clone tool, I cannot click and drag or "paint" with it. I only get a circular clone that is the diameter of the brush. I don't want to clone out the problem areas with a bunch of little circles! I want a smooth, painted cloned area. Is this possible with Aperture or do I need to go back to Photoshop....

    OK--Think I finally discovered the issue. I'm using a trackball and keyboard setup from Euphonix that communicates with the Mac via Ethernet and TCP/IP. Aperture cannot deal with mouse strokes transmitted this way. If I switch to a USB mouse connected directly to the Mac, the brushes work normally. Still a disappointment since the Euphonix is my default keyboard/mouse and I don't really want to keep a separate USB mouse hooked up.....

Maybe you are looking for

  • I am not being able to play sound when I import a .MTS file from my folder

    I am not being able to play sound when I import a .MTS file from my folder on my sequence bar of my Premiere Pro CS6. Even if I use my Media Browser to import the file, the video plays fine, but the audio is disabled it seems. I don't know what to do

  • Mail quota issues

    Server Running mac osx 10.4 Server Admin does not reflect recent changes made within WGM in relation to Mail quota increases. I have rebooted, refreshed mail system etc but the mail quota appearing in mail accounts is incorrect. Please advise the bes

  • HP w2338h Monitor Problem

    I own a HP w2338h monitor and every time I shut down my computer and restart later my homepage shifts from where it was set on my monitor( usually shifts to the left ), then I have to pull it back over to the right back to where it was. Can anyone te

  • Accepting a Service Entry Sheet

    Dear Gurus,                I am getting error while accepting a service entry sheet. Steps followed by ML81n while creating service entry sheet as follows  : 1 - clicked on other po then enter the pn no. 2 - create a new service entry sheet. A servic

  • How to measure work centre performance in the pp point and pm pinot of view

    Dear Guru`s, how to evaluate the work centre performance in the pp,pm point? how to evaluate the OEE (overall equipment efficieny)? can anybody suggest that, if there is any transactions are avialable to get the reports or any process is to be follow