Can't Line up prints - with printer

Going crazy here trying to print from Lightroom.......all is ok with Windows priting to my Epson 1400. But when I try from Lightroom3 no luck. Tried 5 x 7 template, set printer to 5 x 7 and i get a 1/3 or one eye..... it's like it's trying to print to a much larger sheet of photo papar than I have loaded ( the 5 x 7)......any one else in the same boat.... or any ideas on how to correct ???
Thanks.!!

Yea sure is set to 5 x 7..... but this applys to al sizes.
On the LR3 screen the photo is centered on the layout screen, the 5 x7 (or what ever size) is showing on the top of the LR3 screen. But the output is only a part of the photo........
Tanks again all.......

Similar Messages

Do i need to use the phone line that came with the printer to fax paperwork or can I buy a new one?

This question was solved.
View Solution.

Hi Willcarter,
It is all up to you. You can use the phone line which came with the printer or you can get a new one. It does need to be a 2-wire phone line though.
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

Pdf reports with Line Matrix Printer

Dear All,
I am working with oracle reports 10g and printing my reports as pdf on Line Matrix Printer but the output isn't good so we want to know how to generate this report in character mode & can be previewed and printed

Bonjour je m'excuse beaucoup pour poster dans un premier temps en anglais. Je ne savais pas que c'était possible en français.
Voici mon problème: J'ai une imprimante matricielle de type EPSON LX-350 et je souhaite imprimer des fichier PDF (Adobe reader). Mais la police qu'elle sorte est différente de celle attendue après impression et pourtant avec un fichier Word ou Excel je n'ai pas ce problème de format de police. Alors la question est: est t-il possible d'imprimer sans probléme avec une imprimante matricielle un fichier PDF si oui qu'est comment doit procéder. Existe t'il quelqu'un qui l'a déja essayer et avec quelle marque d'imprimante.
Merci de votre disponibilité.

J4680 printing bottom half of some lines of print. What can be done?

HPJ4680 is printing only the bottom half of some lines. Can I correct this?

Hi @ReneePM,
Welcome to the HP Forums!
I noticed that your HP J4680 is printing bottom half of some lines of print. I am happy to help you with this printing issue!
For further assistance, I will need to know the following:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is able to make copies.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Please see this post, Want Good Answers? Ask Good Questions, by @Bob_Headrick, so you can get the most out of these forums.
If you are using Windows please try the HP Print and Scan Doctor, and let me know what happens!
Thank you for posting, and hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printview I can see vertical line,but print out..no vertical lines

Hi,
In the Printview I can see vertical line,but print out..no vertical lines.I have done this form in sapscript.
Can some body throw light on this issue?
With Regards,
Jaheer.

Hi Jaheer,
how do you submit the lines, with the lines-Statement or the underline? Which printer? If it is a needle it might cause problems. What driver SWIN?
You have to provide a bit more information to get qualified answers
~Florian

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Can I use Dell printer cable with a HP printer?

Hi all I'm a newbie here. I'm thinking of getting a HP Photosmart C4680 All-in-One Printer and I know that it doesn't come with a printer cable, does anyone know if I can use my Dell printer cable? It's not a permanent cable. Thanks for any help.
This question was solved.
View Solution.

AS long as it is a USB cable then it will be ok!!!!!!!!1

I can see only one Printer with Apple Talk, but there are five ???

I have a problem on only one mac, with the Apple Talk. We have over 100 Macintosh and all the other machines see the five printers. But this one can only see "one" printer???
What is this? We change the switch port but nothing.
Can i delete any chaches oder preferences to clear the printers???
The problem Mac have 10.3.9

Have you added the other printers to the problem mac?
If you have then my guess is that it is a network issue. How are the printers and macs networked?

Can't find wireless printer with E2000 router

I have a Dell Inspiron 1720 (running Vista Home Premium) that connects to my Linksys E2000 and to a wireless printer, the Canon MX870. It's been working for months without problems.
I just got a Toshiba Satellite P770-BT4G22 Laptop (running Window 7 Professional 64 bit) and installed the Cisco Connect software following the instructions where you have already set up the router and just need to install the software to do things like add a device. I can connect to the router fine using a web browser or the Cisco Connect Software and my Toshiba connects to the Internet through the router without problems.
The problem is Cisco Connect says it can't find a wireless printer when I run it on my new Toshiba. I've put the printer within 3 feet of the router with my Toshiba in between but still it can't find it. My Dell in another room connects to the printer no problem. And I can print to the Canon if I select the Shared Canon Printer ( on the Dell) using the Toshiba's Control Panel Add Printer function. But obviously that means the Dell has to be on so that's not good for much more than troubleshooting. I've also wired a connection from the printer to the Toshiba and downloaded the latest driver, printed that way so I know that's not the problem. The problem is that Cisco Connect can't find the printer. It says there are 6 devices attached to my router so it's seeing something, but I guess not the printer. I've turned any firewalls off for this testing too.
I'm stumped as to why it can't find the printer when the Dell did and they are all on the same network. Unless it's not compatible with 64 bit Windows. Any help would be greatly appreciated.
Thank you.
Solved!
Go to Solution.

I have already added the printer to my network using Windows Add Printer prior to assigning the printer a static IP. But I followed your instructions in making the IP static so if I reset the router I don't have to go through the process again.
When I ran CC and told it to add a printer, it did not identify any printer for me, it went from the screen where you say to add a printer to one where it asked me to name the printer. Honestly, I wasn't even sure if it was referring to the Canon because I'd already added it using Windows, albeit without a static IP, just by knowing what IP it had been assigned. After I gave it the name, it went back to the "home" screen with computers & devices, parental controls, etc. No errors, but no real way to see or change what I had done.
That's why I was asking if there's a way to look at the router and view devices that have a static IP. I can view the DHCP table but it's not there of course. I don't really see anywhere using the router software (either by web connection or CC) where the Canon printer is listed. I see it in Windows Printers, but I saw it there before I reran CC and it asked me to name it.
I appreciate your help and I'm glad to be up and running with it. Especially with having a static IP. I'm just trying to better understand what happened and how to view my devices connected to the router.
Thank you very much for your help.

Can Printer over network but can't scan over network with Officejet 6500 E710n

Got an odd problem... I can print all day via my wireless network, I can even ping my printer's IP with no issues.
I can't scan at all, it keeps giving me connection related error messages (Scanner Unreachable, etc). I checked the "Update IP Address" tool and the IP address was correct. So I figured I would install on a different computer.
I installed using the software from this website (I have never installed this HP printer on this computer, I always did eprinting from this computer), it worked perfectly, it found the printer almost instantly. Installation worked perfect with no issues, errors, etc.
Printed the test page perfectly but I still can't scan over the network, I tried both clicking on "HP Officejet 6500 E710n-z" and clicking on both "Scan a document or photo" and "Activate Scan to Computer" and also I get a connection error if I try the "HP Scan" software.
I ran the "HP Home Network Diagnostic Utility" but it can't find my printer (odd that it found it to install the software and I can print/ping it all day).
I also ran the "HP Scan Diagnostic Utility 4.2" and it DID find the printer... It also got past the "Connectivity" and "Device Manager" steps and put a check next to them.
It then failed on the "Windows (WIA) Scan" step. I skip it and it fails on the "HP Twian Scan" after giving me a connection related error message. It will not let me continue the test.
I have restarted both computers and printer multiple times. I am running Windows 7 on my laptop and Windows XP on my desktop.

I suggest uninstalling the full feature software from both PCs and re-installing and configuring the software on both.
Are you using the HP Solution center to scan? It is in Dutch, but the images are the same as what you should see in a correctly installed full feature software package.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

The special offer for the printer that is going on with a Mac, how does that work? Is it true i can get a free printer?

The special offer for the printer that is going on with a Mac, how does that work? Is it true i can get a free printer?

you pay for it up front, and they give you a rebate or $99, so if you buy a $99 printer from them (Epson Stylus NX430 Small-in-One Color Inkjet Printer $99.95) then the printer becomes free. You can not get this deal unless you also buy a mac with it.

Tried to print from ipad4 with wifi printer. Saying can't find air printer. Printer on and it has printed previously.

Tried to print from my ipad 4 but saying can't find air printer. It has printed before.

Sharonanthony-
First, try double-clicking your Home button. A row of recent Apps will line up along the bottom of the screen. Scroll across and look for the Print Center icon. If it is there, you should be able to delete any print job that might be hanging it up.
If you can access the internet, then you should have a good connection to a printer that is using the same WiFi. If you do not have your normal connection to the internet, then I suggest you unplug your WiFi router for a few seconds. Then reset the iPad's network at Settings-General-Reset-Reset Network Settings. You will need to reconnect the iPad to WiFi.
Fred

Can't get duplex print option for pdf files using Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP8600

I get two-sided option for normal printing, but
I can't get duplex print option for pdf files using Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP Officejet Pro 8600. HP says it's an Adobe problem. I'm stuck.
Thanks in advance.
VO

It depends where the pdf is located. If in the Finder or in an attachment to
an email in Entourage, the message is ³You can¹t open the application
³Acrobat Reader 5.0² because PowerPC applications are no longer supported².
If an attachment in an email that has come via Safari, the message is
³Safari can¹t open the file because no available applications can open it².
In each case the menu bar is Finder or Entourage or Safari as the case may
be.

I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

How can I find a printer that is compatible with my ox 10.4.11 operating system

Helllo,
I have several questions but my most current one is how can I find a printer that is compatible with my current operating system?

Brother is good about supporting older Mac OS versions. We have their HL5250DN b/w laser that supports all the post-1997 Macs in the house, including a 1998 vintage Beige G3 minitower running OS 10.3.9. There is also a driver with OS9 support on the Brother web site.
The bigger problem, based on posts I see in these forums, is not a printer failing to support an older OS but one not supporting a new Mac OS. There are numerous posts after a big OS version change (like the intro of Lion) where people run out and buy whatever printer looks cute/sounds good without researching whether the device supports the new OS yet. Printer makers are often not good about having updated drivers developed by the time Apple rolls out a new OS.

Can't Line up prints - with printer

Similar Messages

Maybe you are looking for