Can't load drivers for KT4A-V with Sempron 2800
I have a kt4a-v board with Sempron 2800 chip
256mb geforce FX5500-TD256 TV DVI AGP card
also 512 Mb PC2700 DDR
Loading windows 98SE works fine until I try to load the drivers that come with the motherboard.
Windows will then not load in anything other than safe mode.
Hello,
Memory module, 1 of them could be faulty but I know windows 98se does not like a lot of memory.
This website says it is made worse with large memory video cards.
http://www.dewassoc.com/support/win98/win9x_512memory.htm
Try this then out the other stick in.
http://support.microsoft.com/?kbid=304943
If you swap the sticks around what happens?
Here is a program that can test the memory.
http://www.memtest.org/download/1.51/memtest86+-1.51.floppy.zip
Download, extract it to a folder, run the install.bat and it will make a memtest bootdisk.
Similar Messages
-
Can't load drivers for bootcamp
I have a Mac with the following specs: 2.66 GHz Intel Core 2 Duo, 2 GB 1067 MHz DDR3. It came with Leopard and I upgraded to Snow Leopard 10.6.7
I purchased Windows from Amazon unaware that the software comes in two versions 32bit and 64bit. I ordered the 64bit and was told by a couple of store clerks that it should work fine with my system. I got hold of a book by David Pogue on the subject and he recommends the 32bit version. I think he may be right.
Everything went ok until it came time to load the drivers for the Mac. I inserted the Snow Leopard Disc and nothing happened. A message appeared on the screen that said something like no support for 64bit machine?
Should I get the 32bit version of Windows or is there something I could do?
Thanks.Most of us on this forum don't use Boot Camp or MS Windows. However there is a Boot Camp forum where you are more likely to get some assistance. Click Apple Support Communities then type Boot Camp in the search field and you will be able to locate it.
-
Can't load drivers for Canon MP610 onto new iMac since loading Leopard
Hello, all you amazingly helpful folks.
Bought new iMac + Canon MP610 yesterday. Successfully installed printer on 3 Macs and a PC, and all was well.
Then--discovered that Leopard DVD was hiding in the box. So, installed Leopard uneventfully. Then--found that scanner wouldn't respond to any commands, and subsequently, I could no longer print from the new iMac ONLY (other Macs still printing fine).
So--I deleted all Canon printer-related folders on the new iMac, and tried to re-load the drivers from the Canon CD. MP Drivers won't load. Keep getting FAILURE message. Tried re-booting, unplugging, in all combinations. Printer still works from the other Macs. Maybe loading Leopard after the original MP610 installation confused things??
What to do next?
Also--NO DRIVERS available for MP610 on Canon web page.
Any assistance much appreciated!!!
Thank you.You may have already done this so forgive me if you have, but I would try deleting the contents of the /Library/Printers/Canon/BJPrinters folder. I would then navigate to the /Library/Receipts and delete the Canon MP610 xxx.pkg file.
Then control-click on the Printers list in Print & fax and click on "Reset printing system..."
Then empty the Trash, unplug the MP610 USB and restart the iMac.
Then I would install the MP610 v6.91 OS X driver. I found it via the Canon Australia web site (http://www.canon.com.au/products/allin_one_printers/all_in_one_printers/mp610support.aspx).
Once the installation is complete, reconnect the MP610 to the iMac and wait. The printer should automatically appear in the Print & Fax application.
Also, in future, you should be posting this on the Leopard printing forum... -
I have a 2009 macbook pro with os x10.9.2 and can't find drivers for windows
i have a 2009 macbook pro with os x10.9.2 and can't find drivers for windows. i trying to install windows using bootcamp but does not allows me to download the drivers..
From the system requirements page: http://support.apple.com/kb/HT5634 for your computer
MacBook Pro
(13-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, 2.53 GHz, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Early 2009)
4
4
DVD
DVD
DVD
The drivers are located on the OS DVD that came with your computer. -
After change Windows XP with Windows 8.1 I can't find drivers for scanning M2727 nf
after change Windows XP with Windows 8.1 I can't find drivers for scanning M2727 nf
Hi: You should be able to use most of the W7 x64 drivers and software from the HP 255 G2 on your model except the BIOS and firmware files. http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6431940&swLangOid=8&swEnvOid=4063 Your notebook has the Realtek RTL8188EE 802.11bg/n 1x1 WiFi adapter, so that is the wireless driver you need. Additionally, you need these usb3 drivers. Install both and reboot. http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_125616_1 http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_123787_1
-
Satellite A205 S4797 - can not find drivers for my drive
I have recovery disks and Windows Vista installation disk. When I try to install error meesage says it can not find drivers for my drive.
I tried scannong CD drive and it cannot find them do 32-bit, 64-bit all have different drivers and if so where do I get the one I need if not from the install disk or recovery disk from manuf.?If you cannot use original Toshiba recovery DVD for OS installation I can imagine there is some problem with DVD itself (some missing file or scratch) but Microsoft Vista installation MUST work on this notebook model.
If this doesnt work too there must be some problem with HDD. Just if you want to install WXP you need to load SATA driver at start-up but Vista must work.
Can you please tell me what happen when you try to install Vista from Microsoft Vista installations DVD? -
HT1338 I can't load driver for HP 6500A printer / scanner
I can't load driver for HP 6500A printer / scanner
What does that mean? Have you downloaded the drivers and to installed them? Have you tried adding the printer with the AirPrint Driver?
-
This is the error message that I am getting on a Solaris 10 sparc server
scsi: no major number
cannot load drivers for /pci@400.....
Can't load the root filesystem
Type 'go' to resume
{0} ok
Is there a way for me to correct this issue. It looks like I am missing a scsi driver to boot up the server? Is there a way to boot into single user mode, mount the filesystem and rediscover the hardware, etc.....First i guess you have to verify that you can find the disks with a probe-scsi-all
next you can boot it of a CD-rom/dvd into single-user:
boot cdrom -s
.. or similar into single-user from a jumpstart image:
boot net -s
Then you can mount the root disk under something such as:
/mnt
and rebuild the config with:
devfsadm -R /mnt
be careful if you have a mirrored filesystem though, you don't want to update just one of the mirrors without first breaking the mirror..
.7/M. -
Can't find drivers for my Satellite C50T-A382
Hi .
I have Satellite C50T-A382 laptop*
Part no. PSCFNV-003002AR*
OS. Windows 8.1
My problem that i tried to reset laptop factory settings by hdd recovery system
But after 7% it freeze and crush and showing blue screen saying there is problem with resetting
I tried so much but still crushing and failed to reset
Then i canceled reset and when i go back to my windows it can't start up .. it start hdd recovery instead
I tried start up repair but still doesn't start up
so i bought a new windows 8.1 pro and install it on my laptop
the problem now that there is some drivers did not found like wireless adapter, Bluetooth, and so much else
so i tried to download driver from your website , but after i inter my laptop model and everything it's show me that there is no drivers to download ..
where can i found drivers for my laptop .. i can't connect to wifi and can't use Bluetooth because my new windows 8.1 pro that i bought did not install drivers for it ..
so help me please ...
Ps : I'm from middle east .. and my laptop has a sticker says "Approved for sale in MEA" and I use toshibamea.com for searching for drivers and didn't find any*
I'm wetting for respond .. and thank youGo to:
http://www.toshiba.eu/innovation/download_drivers_bios.jsp
Here choose:
+Notebook+
+Satellite+
+Satellite C+
+Satellite C50T-A+
+All+
+Windows 8.1 64bit+
Now you will get all drivers for this notebook series.
Note: On the page you will find different WLan driver since different WLan modules have been used in the different models.
Just check each of the drivers
To get the Bluetooth working, you need to install additional Bluetooth Filter Driver Package. This depends on the Wlan module your notebook support.
The proper Bluetooth Filter Driver Package I found in Satellite C50T-B series -
Can't find drivers for display
Hi, I can't found drivers for display Toshiba TruBrite.
That's why I had frequnce on display only 60 Hz.
Could you help me with this trouble?LCD technology is different and cannot be compared to old monitors. LCD displays work on 60 Hz refresh rate and this value is fixed. It cannot be changed.
Doe to this fact you cannot change it.
I don't understand what you mean with display definition but if the right (Toshiba offered) driver is preinstalled everything will be OK. There is nothing that must be defined. Absolutely nothing.
TrueBrite or not there is nothing to be defined.
So if the display driver is preinstalled and if you use right display resolution everything is OK.
Be happy and have fun with your toy. ;) -
Can't find drivers for Lenovo G50-30 for Windows 7 32-bit
Hi,
I can't find drivers for Windows 7x32 bit for my new Lenovo G50-30. Looks like Lenovo support doesn't have them. Am I wrong?hi ziris,
Can you try these drivers:
Chipset:
Intel® Chipset Device Software (INF Update Utility)
Bluetooth:
Bluetooth Driver (Intel, Atheros, Realtek, Broadcom)
Camera:
(AVC, Bison) Camera Driver
If the above drivers doesn't fix the unknown device under Device Manager, can you follow this guide on how to install the drivers via their Hardware ID or you may want to consider installing Windows 7 64bit (this would be best if you'll be utilizing 4GB RAM and above).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Where can I find drivers for Satellite L855-159?
Hello!
I am a recent owner of a brand new Toshiba Satellite L855-159 laptop.
I cannot seem to find any drivers listed for it. i have download some drivers from similar series laptops, like the ethernet driver. That works fine on it, but i cannot seem to find a working wireless driver anywhere.
I have tried the official toshiba page and the toshiba auto detect tool. It says it cannot find my product.
I have also tried entering the serial no. manually and it gives me the same answer.... your product cannot be found or invalid serial no.
(i have tried all versios of toshiba site, in many different languages)
Only time my serial number worked is when i registered the laptop for warranty.
So, i must say that it has been a pain to find the right drivers for my product, and it would not hurt to have a cd/dvd with drivers in the box with the laptop. i know it should be a better solution to have drivers online because you always get the newest version, but a dvd with drivers that always work for your laptop is necessary when the main site FAILS so badly at providing them.
So please tell me... where can i find drivers for my laptop?Hi
According notebook specification your notebook has part number PSKAEE and all drivers, tools and utilities for supported operating systems you can find on Toshiba support and download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
Product type > Notebook
Family > Satellite
Product series > Satellite L Series
Model > Satellite L855
Short Model No. > PSKAEE
Can you find it? -
Satellite U400D - Where can I get drivers for Windows XP?
Hello,
Could you please send me weblinks to Windows XP drivers for satellite U400D? It took ages and i didn't find any of them!!
Thanks a lot, i am getting desperadeHi
The Satellite U400D supports only Vista 32bit and Vista64 because on the Toshiba driver download page I can only find drivers for these Windows versions.
So you should be happy with the preinstalled OS because U400D is fast enough for Windows Vista. It should work really well with Vista.
If you want pretty old Windows XP you have to collect the drivers yourself. Here are some exaples where you can search for drivers:
[www.ati.amd.com]
[www.realtek.com]
http://aps2.toshiba-tro.de/bluetooth/
http://aps2.toshiba-tro.de/wlan/
Good luck! -
Where can I get drivers for Satellite P200D-106?
Dear Gentlemen,
Almost 2 years ago I've buyed a Toshiba Satellite P200D-106 (AMD Turion 64 X2 - TL-52) with Windows Vista preinstalled. I was not very happy that you didn't provide XP drivers for this product, but now I'm very surprised to find out that I can't even find the drivers for Vista. _As a matter of fact, this model (P200D-106) is not found inside your website, not even my serial number. More, your software also don't recognize my laptop._
Please contact me and tell me where can I find these drivers since I lost all my installation CDs. It will be very good if you can provide me drivers for Windows 7, also.
Please note that I'm extremelly unsatisfied about your non-existing online support for my model, since the laptop is not older than 2 years and I've payed for it almost 1.000 EUR.
Model name: Satellite P200D-106
Model no.: PSPBLE-00200QG3
Serial no: 97365091K
Regards,
VictorHi buddy,
To be honest I cant agree with you. I have even checked the Toshiba website for drivers and tools on Satellite P200D and this was successful. The page shows drivers for Vista 32/64bit and also some for Windows 7 32/64bit. I think you should check the Toshiba page again:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
By the way: A new recovery disk you can order from Toshiba directly: https://backupmedia.toshiba.eu/landing.aspx
If you have more questions, please let us know!
Greets -
Where can i find drivers for hp photosmart 5510 for mac 10.7.2?
Hi!Pls, help me in my problem.
where can i find drivers for hp photosmart 5510 for mac 10.7.2?
and how can i connect printer with mac (lion)Uh, did you try HP?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-96135-2 &cc=us&dlc=en&lc=en&os=219&product=5063582&sw_lang=
It claims to work with Lion.
Maybe you are looking for
-
Execute workflow for a Record in MDM thorugh Webdynpro Java
Hello, I am creating a Webdynpro Java Application to listen to the Save event on the Item Edit iview through Eventing, the application is called on that event and RecordID is fetched in the code. Now I want to trigger the workflow for that Record bei
-
I want to delete photos from my iPad . But the help page does not help. When I click devices a photo pop up option does not appear
-
Using the CTRL key in Screen Sharing
I am using native OS X screen sharing to share my Mac OS X Lion iMac screen on my Mac OS X Snow Leopard MacBook Pro. I am using it to run Xcode since I can't run the latest version of Xcode on my Snow Leopard machine (2006 MacBook Pro). It works gr
-
Is it possible to add photos into Indesign
Apologies for such a basic question but haven't used InDesign yet properly, downloaded the free trial but can't find any option to import a photo? I'm looking to create a simple text box and fill it with a jpg. Is this possible?
-
I've installed the most recent version of everything and made sure that the dtu's firmware was upgraded. I also installed the MMR which has the flash accel into my XP VM. For the most part it all works as expected. Here are my observations: When I st