Can't load drivers to t42. Using an IBM pre-load xp pro sp3 hard drive

Hello all
I am Charlie and new to the community and have 2379-rhu T42
I can not load the last 3 drivers to this T42 with an IBM pre-load HDD with xp pro sp3.
i have done all the windows updates and been to Think Advantage tool box---it just flags me the drivers are not loaded.
I went to the Lenovo site and the Intel site......no joy in mudville
i went through a lot of the t42 driver issues in the forum posts, but not solved my issues (or covered them all).
here is what i can gather from device manager and the net:
thinkpad PM device :
device instance id : ROOT\unknown\000
hardware id : *len0068
UNKNOWN DEVICE:
device instance ID: ACPI\ATM1100\4&61F3B4B&0
Hardware Ids: ACPI\ATM1100
Network Controller
Device instanc Id : PCI\VEN_8086&DEV_4224&SUBSYS_10108086&REV_05\4&39A85202&0&10F0
Hardware IdPCI\VEN_8086&DEV_4224&SUBSYS_10108086&REV_05s:
PCI\VEN_8086&DEV_4224&SUBSYS_10108086
PCI\VEN_8086&DEV_4224&CC_028000
PCI\VEN_8086&DEV_4224&CC_0280
GOOGLE showed me this is an
Intel(R) PRO/Wireless 2915ABG Network Connection
THANK YOU, for any and all assistance.
charlie

Hi Charlie,
I believe these three drivers should be what you need. Did you try to download and install any of these? If not try these and let us know if that works out fine or not.
Intel wireless driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62875
Atmel TPM (Trusted Platform Module) device driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-58054
ThinkPad Power Management driver for Windows:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4GXPEG
You can also use Lenovo system update to install and update your drivers without the need to download and install each one manually.
Lenovo system update for Windows XP:
http://www-307.ibm.com/pc/support/site.wss/MIGR-66956.html
-gan

Similar Messages

Can't load Tiger - Problem with hard drive or other? What to do next?

I would like some advice on installing Tiger on an IMac PowerPC G4 (700 MHZ machine). This machine has 512 MB SDRAM. The machine is currently running Mac OS 10.3.9. Thus far I have been unable to install Tiger.
The machine is 5 years old and was run in Classic OS 9 for several years. There have been no material problems since upgrading to 10.3.9 several years ago.
I have been Installing with Archive. The install does 100% of the Checking Installation DVD but very soon after entering the Preparing for Installation/Verifying Destination Volume (the task bar has only filled about 5%) it kicks out of the install saying that there were errors in installing the software. No further information is provided.
I have disconnected all external devices and run the Tiger disk utilities. I receive the message that an “Invalid catalog record type” has been encountered and that “Volume Check has failed.”
“Error: The underlying task reported failure on exit”
“1 HFS volume checked”
“1 volume could not be repaired due to error”
At this time, I do not know what steps to take next.
Should I get a stronger utility program to try to mend the hard drive?
Should I conclude that the Tiger update is not feasible given the age of my machine?
I don’t have an external drive to load everything off of the iMac to do an Erase and Install. I am reluctant to do this anyway in case this will not fix the above issue?
Any advice would be most welcome.
700 Mhz PowerPC G4 Mac OS X (10.3.9)

Thank you for your reply.
I found the article you sent me to so fascinating with the pictures.
Sad to say, that this is completely beyond me from a mechanical and personal dexterity perspective. I actually only knew what two items were in the tools required list. I think I could only get through two steps: set imac on soft surface (but not wool blanket) and take the bottom off.
Therefore, I think the next step is to go to the Mac store with my problem description and the imac and see what they can do.
Based on reading the article, I think I should also have more memory installed if in fact, they are going to take the bottom off at the Apple store. Would you agree?
Alternatively, it occurs to me to simply keep using the imac in 10.3.9 and save for a new laptop since I'm now running wireless network and it would be fun to have another laptop accessible around the house. Or maybe save for a new desktop...
Any thoughts?
2nd floor mac

Can I load "Pages" onto new hard drive without having to pay for it again?

I have a 5 yr old Mac that just had it's hard drive replaced. I had paid for and loaded Pages onto the original hard drive. Wondering if there's any way to load Pages onto my new hard drive without having to pay for the program again. Thanks so much

If you originally installed Pages from a CD or DVD, reinstall it from there.
If you installed Pages from the Mac App Store, yes, from the Apple ID you purchased it with.
If you got Pages from the iTunes App Store, the Mac version of it is a separate purchase.
(67842)

How can I stop downloading pictures into iPhoto and start down loading into a portable hard drive?

How can I stop downloading pictures into iPhoto and start down loading into a portable hard drive?

You could use the Image Capture application.

Can i use the time capsule as just an external hard drive for music or does it have to be used soley as a backe up?? im thinking for music and photos

Can I use the time capsule as just an external hard drive for music or does it have to be used soley as a back up? I'm thinking for music and photos

Nickles96 wrote:
Hello friends.. I have a similar question, in that I would like to purchase the 2TB TC for use as a NAS device, in addition to taking advantage of the Air Port extreme.. Then I could dump my Linksys router.
I was originally looking at a Synology NAS solution, but the TC seems like it can meet my needs.
I have a Synology NAS as well as the Time Capsule. If you look at the 3.2 beta program, the Synology actually attempts to replicate TC functionality in that you can use it with Time Machine on your Mac.
I must say, Airport on the TC is definitely a nice feature!
Nickles96 wrote:
In addition to the obvious feature of the backup, can I indeed also use the TC as a NAS drive to access from remote locations (example from the office)?
I'm surprised more people aren't using the TC as a dedicated NAS deviced.. I've searched high and low on forums around the web, and don't seem to see many people trying to use it as I've outlined.
I can't see why this wouldn't fufill my needs, and take the place of a separate NAS solution (like the Synology, or iOmega, Seagate, etc....)
Has anyone used this TC as such?
Yes, you can do this and it's something I've been trying to do, but I'm currently having issues. I have another thread stating I consistently get "connection failed" messages. I'm basically storing my music/photo/video files on the TC and keeping my Mac hard drive fairly lean. In terms of NAS functionality, the TC is very basic. Synology/QNAP and others have a lot more features so don't rule them out.

How can i use the airport time capsule as a external hard drive?

how can i use the airport time capsule as a external hard drive?

Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries.

Can I simply just use my Time Capsule as a normal External Hard drive? A wireless external hard drive?

Can I simply just use my Time Capsule as a normal External Hard drive? A wireless external hard drive?

I am not sure what you mean by normal external but yes, it is a network hard disk drive.. and you can use wireless.. the only trouble then is, if there is no ethernet connection and internet is by wireless to a different router, then you cannot do both at once.

Can I use time machine to back up via a hard drive connected by USB to a HomeHub router?

Can I use time machine to back up via a hard drive connected by USB to a BT HomeHub router? Is there a better way to back up and store files than via the USB port on my new MacBook Pro? I'd like storage to be accessible from my earlier version MacBook too.

I think you want to make backups without connecting a hard disk via USB. In other words, you want to have the data storage be shared in your home wirelessly.
If this is the case, I recommend using a Time Capsule.
Time Capsule works great with Time Machine. You can set up all your devices to automatically make backups on the Time Capsule wirelessly and effortlessly.

Hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive?

hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive? please help for i only have around 618mb left out of 189GB!!!!!!!!!!!!!!!!

If what doesn't work?
If cloning your internal drive to the external drive is not successful, I expect CCC will tell you so. Assuming that doesn't happen, you will have a bootable replica of the internal drive on the external drive once CCC has finished.
You can then do any of several things:
1. Replace your internal drive with a much larger one (320GB or 500GB, or even larger), and clone the external drive's contents onto the new drive so you'll have all your data in one place. Note that if you do this, you'll also need to buy an external drive that's large enough to back the new internal drive up on.
2. Boot from the external drive as a temporary measure while you clear at least 30-40GB of data off the internal drive, allowing you to keep using it and saving small amounts of data to it. The external drive will then contain the only copies of the files you've deleted from the internal drive, so you'll need a seond external drive large enough to back both the other drives up on.
If you can't comfortably clear a minimum of 30GB off the internal drive, you really need a larger internal drive right now, and you shouldn't bother fooling around with the inadequate one you have — you'll just quickly overfill it again.
3. Replace the optical drive in your MBP with a large conventional hard drive, giving you two hard drives inside the machine. You will then need one or more external drives large enough to back up both of the internal drives.
If you sense a theme here — back up, back up, back up — you are correct. It's flat-out foolhardy to own or use a computer without maintaining complete, up-to-date backups of everything at all times.

Can I use my 160gb iPod classic as an external hard drive for my MacBook?

Can I use my 160gb iPod classic as an external hard drive for my MacBook?

That link seems to be broken. It does normally lead to a solution. For the time being go to
http://www.google.com/search?q=ipod+classic+disk+mode
Let your mouse hover over the link until you see the option appear on the right to view the cached version Google contains:
Putting iPod devices with a Click Wheel into Disk Mode
If necessary, verify that your iPod has a Click Wheel.
Before placing the iPod into Disk Mode, verify that it is charged.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
If you have an older iPod model, without a Click Wheel
Before placing the iPod into Disk Mode, verify that it has a charge.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Play/Pause and Menu buttons until the Apple/iPod logo appears, then release them. This resets iPod. When you reset iPod, all your music and data files are saved, but some customized settings may be lost.
When the Apple logo appears, immediately press and hold the Previous and Next buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod should say "Do not disconnect".
If you have an iPod nano (6th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Volume Down buttons simultaneously until the display turns black. This should take about eight seconds.
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.

Can I load Acrobat Pro 6 onto Windows 7 and upgrade to Acrobat Pro 9?

Can I load Acrobat Pro 6 onto Windows 7 and upgrade to Acrobat Pro 9? My former PC ran on Windows XP and this new PC runs on Windows 7. I don't want to shell out another $449 when Acrobat Pro 9 worked fine for me.

You might be able to install Acrobat 6 for this purpose, but you probably won't have to. When you install Acrobat 9 Upgrade it should (if I remember right) ask for the serial number of your "qualifying" product and at that point you put in the Acrobat 6 serial.

How can I use my TimeMachine to back up the external hard drive

How can I use my TimeMachine to back up the external hard drive that is attached to my TimeMachine? I have the external drive attached to my TimeMachine via the USB port and want my TimeMachine to back up the files on the external drive, as it does for the files on my computer. How do I do that?

https://discussions.apple.com/message/16276201#16276201

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? Create a personal cloud?

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? To create a personal cloud?
Can someone advise as to whether i can do the following:
                            Future Internet connection -------------------TIME CAPSULE (containing all files) -------------- Backed up on the WD 2T Hard-drive I have
                                  (not connected yet)                                         I                                                          (*connected to timecapsule physically)
                                                                                                        I
                I                                         I                                                I                                                              I                                                I
      Macbook Pro                             iMac                                       HP (PC)                                             OLD Macbook Pro                         iPhone
(used for remote working)       (Used for home working)     (used for heavy CAD and rendering)    (not being used for anything at the moment)        (& iPods)
I am looking to have all my files in one place as i am hopelessly disorganised. I know the online clouds are a good solution (used Dropbox at work and uni for 3 years) however i am wanting to create my own 'dropbox/icloud' at home. So whenever i get back home with my laptop, any work i have been working on whilst out that day is updated to the timecapsule, and then ultimately as i turn on the other devices, they update to those newer versions of the files. Please tell me that the 3TB time capsule i have can do this, otherwise it feels rather overpriced as a wireless storage device?
Another note (to those in the know) If i am to be working on large files (REVIT/SOLIDWORKS/KEYSHOT/CREO/AUTOCAD) - is the timecapsule connection good enough to support editing and updating these files?
I know i may be asking a question that many have before, but as a bit of a technical novice I wanted a clear-cut answer to my specific circumstances. Your help is greatly appreciated.
(*can i use this WD hard-drive that is connected to the Time Capsule as a back up? so that the time machine back-ups/any back ups are also backed up onto this one? can the WD be a backup for the TC?)
Kind Regards
Joe

The diagram was supposed to look more like this......
Internet ---------TIME CAPSULE(containing all files) --------WD 2T Harddrive
                                            I
     I                           I                          I                            I                                   I
Macbook Pro         iMac                 HP (PC)            OLD Macbook Pro           iPhone
Sorry!
Regards
Joe

How can i backup my iPod Touch 4g and save my apps onto a new hard drive without having to save onto the current hard drive first?

How can i backup my iPod Touch 4g and save my apps onto a new hard drive without having to save onto the current hard drive first?
My current hard drive is filled up and i'm going to buy a new, bigger hard drive. How can i change the save and backup destination for iTunes so i can backup and transfer my purchases(apps) onto the new hard drive? Without having to backup and save my apps onto the current hard drive because there's no space left on it. Thanks!

have you tried following the steps given here on the apple's knowledge base site may be they can help you
http://support.apple.com/kb/HT1414
here is a video from youtube as well
http://www.youtube.com/watch?v=wH_1qkHkZi0
also this tutorial
http://www.imore.com/how-to-setup-backup-restore-update-use-icloud

I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk?

I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk? It is the start up disk and I can't figure out how to get it out of the computer so I can put my lion boot disk in. Thanks

turn the mac all the way off. turn the mac on by pressing the power button. as soon as the apple logo appears, pres and hold your mouse button(trackpad mouse clicker etc...) until the CD comes out.

Can't load drivers to t42. Using an IBM pre-load xp pro sp3 hard drive

Similar Messages

Maybe you are looking for