Can't load HP612c Drivers

I just reinstalled Window 7 & upgraded to SP1.
I have a old Paralell port HP Deskjet 612C connected to a Print Server [ Linux ]
I am unable to Install the Drivers.
The Print Server does not push the drivers to my workstation
I have to manually select the driver
The DeskJet 612C [or even 610c] is not listed in the HP offerings.
It used to be there
The website does not allow to download
The printer is not USB capable [it's that old]
The NT drivers that came with the Printer won't work.
Any Ideas???

Hi, Dave.
It may be too late, but I found Realtek drivers here that work for my 845E Max-L under Windows 98.
HTH.
regards, Andy

Similar Messages

Can't load mac drivers

When I try to load mac drivers I get the following message" Bootcamp X64 is unsupported on this computer model." Windows installed properly except for this problem. I could run Microsoft Office but I need the Mac drivers to run video applications I presume.
I purchased Windows Home 64bit and was told it would work on my computer. Should have I gone for the 32bit version?
My computer is two year old IMac with following specs: 2.66 GHz Intel Core 2 Duo, 2 GB 1067 MHzDDR3, came with Leopard but I updated to Snow Leopard version 10.6.7 Can someone help me with this?
Thanks.

NA Smith wrote:
This blog looks promising for your issue: http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22:qbo ot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7:how-to&lang = en
Awesome answer.
Rick

Still Can't Load GART drivers & AGP is MIA

This is driving me nuts...
Despite my best efforts, I (still) cannot load the GART drivers which means DX9 is saying AGP Texture Acceleration is "Not Available".
I have flashed my BIOS with the current version, removed all the drivers, downloaded and installed the latest ATI Catalyst drivers and downloaded and semi-installed the latest nVidia drivers. I say "semi-installed" because when I run the nVidia set up, the install wizard pops up, scans my system, and then shuts itself off. So I wind up manually installing only the audio drivers via "Add New Hardware"
So, does it take to get the rest of the nVidia drivers in??
You guys helped me out earlier today, can you work some magic again??

note this for k7n2 delta-L with XP also using nforce unified 5.10 with out audio keys
for to large post here, use the nvmcp.inf keys for audio
sample audio string
%PCI\VEN_10DE&DEV_01B1&SUBSYS_838410DE.DeviceDesc% = NVMPC_Install,PCI\VEN_10DE&DEV_01B1&SUBSYS_838410DE
can try fixing MS to see your hardware correctly by adding these keys in C:\windows\inf\machine.inf
[Manufacturer]
%NVIDIA_MFG%=NVIDIA_SYS
[NVIDIA_SYS]
%PCI\VEN_10de&DEV_01b4.DeviceDesc% = NO_DRV, PCI\VEN_10de&DEV_01b4
%PCI\VEN_10de&DEV_01b4.DeviceDesc% = NO_DRV, PCI\VEN_10de&DEV_0064
%PCI\VEN_10de&DEV_01b4.DeviceDesc% = NO_DRV, PCI\VEN_10de&DEV_00D4
%PCI\VEN_10DE&DEV_01AA.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AA
%PCI\VEN_10DE&DEV_01AB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AB
%PCI\VEN_10DE&DEV_01AC.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AC
%PCI\VEN_10DE&DEV_01AD.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01AD
%PCI\VEN_10DE&DEV_01EA.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EA
%PCI\VEN_10DE&DEV_01EA&REV_C1.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EA&REV_C1
%PCI\VEN_10DE&DEV_01EB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EB
%PCI\VEN_10DE&DEV_01EB&REV_C1.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EB&REV_C1
%PCI\VEN_10DE&DEV_01EB.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EC
%PCI\VEN_10DE&DEV_01ED.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01ED
%PCI\VEN_10DE&DEV_01EE.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EE
%PCI\VEN_10DE&DEV_01EF.DeviceDesc% = NO_DRV, PCI\VEN_10DE&DEV_01EF
%PCI\VEN_10DE&DEV_01B7.DeviceDesc% = NVIDIAAGP_Install,PCI\VEN_10DE&DEV_01B7
%PCI\VEN_10DE&DEV_01E8.DeviceDesc% = NVIDIAAGP_Install,PCI\VEN_10DE&DEV_01E8
%PCI\VEN_10DE&DEV_00D2.DeviceDesc% = NVIDIAAGP_Install,PCI\VEN_10DE&DEV_00D2
%PCI\VEN_10DE&DEV_01C3.DeviceDesc% = NVENETXP_Install,PCI\VEN_10DE&DEV_01C3
%PCI\VEN_10DE&DEV_0066.DeviceDesc% = NVENETXP_Install,PCI\VEN_10DE&DEV_0066
%PCI\VEN_10DE&DEV_0065.DeviceDesc% = NVHDC_Install,PCI\VEN_10DE&DEV_0065
c:\windows\inf\AGP.inf
[Manufacturer]
%NVIDIA_MFG%=NVIDIA_SYS
[NVIDIA_SYS]
%PCI\VEN_10DE&DEV_01A4.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01A4
%PCI\VEN_10DE&DEV_01A5.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01A5
%PCI\VEN_10DE&DEV_01A6.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01A6
%PCI\VEN_10DE&DEV_01E0.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01E0
%PCI\VEN_10DE&DEV_01E1.DeviceDesc%=AGP_BRIDGE_DRV,PCI\VEN_10DE&DEV_01E1
[Strings]
NVIDIA_MFG = "NVIDIA"
PCI\VEN_10DE&DEV_01A4.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01A5.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01A6.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01E0.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"
PCI\VEN_10DE&DEV_01E1.DeviceDesc="NVIDIA nForce AGP Host to PCI Bridge"

Can't load Synaptics drivers in Dell Vostro V13

Hello. I've spent most of the afternoon trying to make my touchpad work as intended, but without any luck. The touchpad works, but without scrolling (of any kind) and I can't disable it with syndaemon, because it complains that there's no synaptic device available.
I did install the synaptic drivers. pacman -Qs synaptic output:
local/xf86-input-synaptics 1.2.1-1 (xorg-input-drivers)
synaptics driver for notebook touchpads
I tried both methods available in the wiki (xorg and hal), but none worked for me. This is the output of some (I hope) relevant commands:
/proc/bus/input/devices/
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0001 Product=0001 Version=ab83
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=120013
B: KEY=500f 2902002 8380307c f910f001 feffffdf ffefffff ffffffff ffffffff
B: MSC=10
B: LED=7
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
U: Uniq=
H: Handlers=event3
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=3
B: KEY=4000 0 0 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0003 Vendor=05c8 Product=030b Version=0106
N: Name="Laptop_Integrated_Webcam_1.3M"
P: Phys=usb-0000:00:1a.7-2/button
S: Sysfs=/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
U: Uniq=
H: Handlers=kbd event7
B: EV=3
B: KEY=100000 0 0 0 0 0 0
I: Bus=0003 Vendor=413c Product=8161 Version=0111
N: Name="HID 413c:8161"
P: Phys=usb-0000:00:1a.0-1.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input8
U: Uniq=
H: Handlers=kbd event8
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf f3cfffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
U: Uniq=
H: Handlers=kbd event9
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0
I: Bus=0001 Vendor=10ec Product=0269 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input11
U: Uniq=
H: Handlers=kbd event10
B: EV=40001
B: SND=6
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio2/input0
S: Sysfs=/devices/platform/i8042/serio2/input/input12
U: Uniq=
H: Handlers=mouse1 event11
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Macintosh mouse button emulation id=7 [slave pointer (2)]
⎜ ↳ PS/2 Generic Mouse id=8 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=6 [slave keyboard (3)]
↳ Laptop_Integrated_Webcam_1.3M id=9 [slave keyboard (3)]
↳ HID 413c:8161 id=10 [slave keyboard (3)]
↳ Sleep Button id=11 [slave keyboard (3)]
↳ Power Button id=12 [slave keyboard (3)]
↳ Video Bus id=13 [slave keyboard (3)]
↳ Power Button id=14 [slave keyboard (3)]
I can't see anywhere a synaptic device, what I'm missing? I'm sure that's something really stupid and yet I can't realize what I'm doing wrong.
Does anyone can give me a hint? Thanks for reading.

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux paradox 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
Kernel command line: root=/dev/disk/by-uuid/dc7b3829-cad4-4785-b704-e6e6b32cab35 ro vga=792
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 8 17:21:52 2010
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a42:1028:042b Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfe000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a43:1028:042b Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfe400000/1048576
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.4.901, module version = 2.10.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1366x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): [XvMC] xvmc_vld driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 361 x 203
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device PS/2 Generic Mouse
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event11"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found relative axes
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
(**) PS/2 Generic Mouse: (accel) acceleration profile 0
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/hal: Adding input device Laptop_Integrated_Webcam_1.3M
(**) Laptop_Integrated_Webcam_1.3M: always reports core events
(**) Laptop_Integrated_Webcam_1.3M: Device: "/dev/input/event7"
(II) Laptop_Integrated_Webcam_1.3M: Found keys
(II) Laptop_Integrated_Webcam_1.3M: Configuring as keyboard
(II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_1.3M" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device HID 413c:8161
(**) HID 413c:8161: always reports core events
(**) HID 413c:8161: Device: "/dev/input/event8"
(II) HID 413c:8161: Found keys
(II) HID 413c:8161: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event5"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event9"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "CPT", prod id 6100
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0 75.44 1366 1425 1464 1560 768 773 782 806 +hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1366x768"x0.0 50.29 1366 1425 1464 1560 768 773 782 806 +hsync -vsync (32.2 kHz)
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Generic Mouse: Device reopened after 1 attempts.
(II) Laptop_Integrated_Webcam_1.3M: Device reopened after 1 attempts.
(II) HID 413c:8161: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
Thanks for your interest!

Can't load Epson Drivers

I am not able to load any Epson print drivers from the Epson website onto my iBook. I reloaded the software using the combi choice, reparired permissions, and restarted numerous times. Still no go.
I have no problems loading the same drivers on a G4 Power Mac with the same version of software. Does anyone have any idea what's going on?
Thanks,
Lou

I now have Epson drivers. I was doing something really stupid. I did not have the printer connected to the computer when I tried to add the print drivers. Duh.
Lou

Can't load drivers for KT4A-V with Sempron 2800

I have a kt4a-v board with Sempron 2800 chip
256mb geforce FX5500-TD256 TV DVI AGP card
also 512 Mb PC2700 DDR
Loading windows 98SE works fine until I try to load the drivers that come with the motherboard.
Windows will then not load in anything other than safe mode.

Hello,
Memory module, 1 of them could be faulty but I know windows 98se does not like a lot of memory.
This website says it is made worse with large memory video cards.
http://www.dewassoc.com/support/win98/win9x_512memory.htm
Try this then out the other stick in.
http://support.microsoft.com/?kbid=304943
If you swap the sticks around what happens?
Here is a program that can test the memory.
http://www.memtest.org/download/1.51/memtest86+-1.51.floppy.zip
Download, extract it to a folder, run the install.bat and it will make a memtest bootdisk.

Early 2008 Mac Pro - Can't load Boot Camp drivers for Win 7 64

Trying to install Win 7 64 bit on my early 2008 Mac Pro. I downloaded the Boot Camp drivers 4.0.4033 and installed them on a USB drive but, for some reason, when I try the install them during the process, I get a message that my hardware is not recognized. Skipping the driver loading process, I am able to install Win 7 but when the system trys to restart to continue the install, I get a message "disk error, press any key to restart". Pressing any key does not get me anywhere. I went through the Win 7 repair process and again tried to load the drivers with no luck.
Any thoughts would be appreciated.
Thank you,

That article was also my starting point and I have followed those steps again and again and again. I haven't slept, I haven't done anything other then try to make it work for more hours than I can count. I came here for help because that solution is not working for me.
The region and keyboard type settings simply don't have the Apple keyboard layout listed. As I said, someone on the Fusion forum tried to follow the article's instructions too and he managed to get it working because he COULD run setup.exe (Boot Camp Drivers) on his machine, and I CAN'T. Yes, it is all explained in that article... but the drivers WON'T INSTALL, I get an error message saying "This version of Boot Camp is not intended for this computer model".
First you said it wasn't physically possible for me to install the drivers, then you said I should just follow the article. Well, the article clearly says "Install the Boot Camp Windows device drivers in the virtual machine" which you just said couldn't be done! I want to cry. I should have just bought a second laptop, this is too painful.

Updating ojdbc drivers Can't load IA 32-bit .so on a IA 32-bit platform

I ran into some problems updating the Oracle OCI client and drivers; I downloaded the basic instant client package version 11.1.0.7.0 from the oracle website, then updated my maven pom file to fetch the ojdbc5 jar file (11.1). Then when I packaged and deployed it on my tomcat server I ran into this error when requesting from the server:
Caused by: java.lang.UnsatisfiedLinkError: /home/tongz/apache-tomcat-5.5.27/webapps/ROOT/WEB-INF/lib/libocijdbc11.so: Can't load IA 32-bit .so on a IA 32-bit platform
This error seems to stem from version compatibility issues / permissions; however even after I changed permissions to r/w on all oracle related lib files and checked that my java version is compatible (1.5.0_11), I still get the same error and don't know what could be the cause. Please advise. Thanks.
Edited by: user9272841 on Mar 10, 2010 11:49 AM
Edited by: user9272841 on Mar 10, 2010 11:58 AM

Thanks for the quick reply Chris.
You're right. When I run file libttclient.so on the different client files, I see the version 5 one is 64-bit but the version 6 one is 32-bit.
Version 5 fie: libttclient.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), not stripped
Version 6 file: libttclient.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
The SysAdmin says they don't have 64-bit versions. Oh dear! And the developers aren't keen on changing their code to use a 32-bit JVM.
Ah well, thanks for the response.
Best wishes!

Can't load drivers to t42. Using an IBM pre-load xp pro sp3 hard drive

Hello all
I am Charlie and new to the community and have 2379-rhu T42
I can not load the last 3 drivers to this T42 with an IBM pre-load HDD with xp pro sp3.
i have done all the windows updates and been to Think Advantage tool box---it just flags me the drivers are not loaded.
I went to the Lenovo site and the Intel site......no joy in mudville
i went through a lot of the t42 driver issues in the forum posts, but not solved my issues (or covered them all).
here is what i can gather from device manager and the net:
thinkpad PM device :
device instance id : ROOT\unknown\000
hardware id : *len0068
UNKNOWN DEVICE:
device instance ID: ACPI\ATM1100\4&61F3B4B&0
Hardware Ids: ACPI\ATM1100
Network Controller
Device instanc Id : PCI\VEN_8086&DEV_4224&SUBSYS_10108086&REV_05\4&39A85202&0&10F0
Hardware IdPCI\VEN_8086&DEV_4224&SUBSYS_10108086&REV_05s:
PCI\VEN_8086&DEV_4224&SUBSYS_10108086
PCI\VEN_8086&DEV_4224&CC_028000
PCI\VEN_8086&DEV_4224&CC_0280
GOOGLE showed me this is an
Intel(R) PRO/Wireless 2915ABG Network Connection
THANK YOU, for any and all assistance.
charlie

Hi Charlie,
I believe these three drivers should be what you need. Did you try to download and install any of these? If not try these and let us know if that works out fine or not.
Intel wireless driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62875
Atmel TPM (Trusted Platform Module) device driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-58054
ThinkPad Power Management driver for Windows:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4GXPEG
You can also use Lenovo system update to install and update your drivers without the need to download and install each one manually.
Lenovo system update for Windows XP:
http://www-307.ibm.com/pc/support/site.wss/MIGR-66956.html
-gan

Can't load drivers for bootcamp

I have a Mac with the following specs: 2.66 GHz Intel Core 2 Duo, 2 GB 1067 MHz DDR3. It came with Leopard and I upgraded to Snow Leopard 10.6.7
I purchased Windows from Amazon unaware that the software comes in two versions 32bit and 64bit. I ordered the 64bit and was told by a couple of store clerks that it should work fine with my system. I got hold of a book by David Pogue on the subject and he recommends the 32bit version. I think he may be right.
Everything went ok until it came time to load the drivers for the Mac. I inserted the Snow Leopard Disc and nothing happened. A message appeared on the screen that said something like no support for 64bit machine?
Should I get the 32bit version of Windows or is there something I could do?
Thanks.

Most of us on this forum don't use Boot Camp or MS Windows. However there is a Boot Camp forum where you are more likely to get some assistance. Click Apple Support Communities then type Boot Camp in the search field and you will be able to locate it.

Can't load drivers for Canon MP610 onto new iMac since loading Leopard

Hello, all you amazingly helpful folks.
Bought new iMac + Canon MP610 yesterday. Successfully installed printer on 3 Macs and a PC, and all was well.
Then--discovered that Leopard DVD was hiding in the box. So, installed Leopard uneventfully. Then--found that scanner wouldn't respond to any commands, and subsequently, I could no longer print from the new iMac ONLY (other Macs still printing fine).
So--I deleted all Canon printer-related folders on the new iMac, and tried to re-load the drivers from the Canon CD. MP Drivers won't load. Keep getting FAILURE message. Tried re-booting, unplugging, in all combinations. Printer still works from the other Macs. Maybe loading Leopard after the original MP610 installation confused things??
What to do next?
Also--NO DRIVERS available for MP610 on Canon web page.
Any assistance much appreciated!!!
Thank you.

You may have already done this so forgive me if you have, but I would try deleting the contents of the /Library/Printers/Canon/BJPrinters folder. I would then navigate to the /Library/Receipts and delete the Canon MP610 xxx.pkg file.
Then control-click on the Printers list in Print & fax and click on "Reset printing system..."
Then empty the Trash, unplug the MP610 USB and restart the iMac.
Then I would install the MP610 v6.91 OS X driver. I found it via the Canon Australia web site (http://www.canon.com.au/products/allin_one_printers/all_in_one_printers/mp610support.aspx).
Once the installation is complete, reconnect the MP610 to the iMac and wait. The printer should automatically appear in the Print & Fax application.
Also, in future, you should be posting this on the Leopard printing forum...

After upgrading to Solaris 10 "Can't load the root filesystem" on V245

I have a Sunfire V245 that was running on Solaris 9 (very stable). I upgraded to Solaris 10 (6/06) this morning and everything seemed to go smoothly. After the upgrade the system rebooted, but will not boot. I get the following uptput;
Rebooting with command: boot
Boot device: disk File and args:
SunOS Release 5.10 Version Generic_118833-17 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
pxb_bcm: cannot load driver
Cannot load drivers for /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@0,0:a
Can't load the root filesystem
Type 'go' to resume
"go" attempts to reboot, but I end up back in the same place.
Please help.
Thanks in advanced,
Craig

It seems like the driver for that device does not exist. Since the system installed successfully it means that it S10 did find a disk. I wonder if that was a different disk than the default disk. Please boot to the miniroot and check the disk info.

Hard-Drive not Detected load sata drivers

Hi everyone I have a G6-1189sa notebook, I had a faulty harddrive so replaced it with the exact same drive 750GB WD, Thing is I could not save anything from the original drive ? so no recovery partitions are anything I even lost all my family photos and software.
Ok so I done a straight swap over and went ahead installing my fresh Windows 7 x64 disk, then I got an error message saying no device detected please install driver etc etc.
I know I need to install the sata driver for the harddrive to be detected, so I extracted the HP sata control driver to a USB pen the tried to load the driver, with the load driver option on the install disk.
Error message saying driver is not signed !!!! So after some reading on google I learned I had to disable the naitive sata option in the bios settings for the harddrive to be detected.
Thing is there is not a option for this in my bios ? unless Im missing something like an advanced bios setting.
I even went to the Intel site and tried some of there drivers but I get the same error message driver not signed.
So my question is ? how can I disable the native sata option if Its possible , If not how can I load the HP sata driver if its not signed.
Its very anyoing someone even said I have to slip the drivers in and make a new home made W7 disk myself to get my pc working again what the hell, where would I start.
Maybe I should put the laptop in the post and send it back, Ive never had so much trouble before making simple memory and harddrive exchanges.
Any advice please people Im at my wits end, my laptop is only a few month old and its now a door stopper lol

Hi,
Boot into the bios and be sure that the hard drive is detected.
Sata drivers are included in Windows 7.
Return the bios to its default settings and use the HP Recovery Disks. If you don't have the Recovery Disks then order them from HP. Order HP recovery Disks.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HT1338 I can't load driver for HP 6500A printer / scanner

I can't load driver for HP 6500A printer / scanner

What does that mean? Have you downloaded the drivers and to installed them? Have you tried adding the printer with the AirPrint Driver?

My macbook can't load java

I am surprised to find out that all of a sudden the applet (java) can't load properly.
Before today, 31 July, I was able to use any website that require java platform and the applet doesn't have any problem loading. For example, I could go to a bank's website to do internet banking and transfer. Today, I couldn't.
I've tried many methods that I've come across in the web community but nothing is helping.
Please help!
Julia
PS: My Macbook's on Lion OS and my iMac on Snow Leopard... both can't load the applet / Java platform.

The latest drivers here:
http://support.apple.com/kb/DL1398
The new driver is 9.04

Can't load HP612c Drivers

Similar Messages

Maybe you are looking for