Can't load itunes on windows 7. Received Apple update and something went wrong. Now it won't install from the apple website at all
Apple sent an update to itunes program and it didn't complete installation correctly. Now I can't load it and get a consistent error message and the iiPhone can't sync without itunes installed. Anyone able to help with this?
Now I can't load it and get a consistent error message
What does the error message say? (Precise text, please.)
Similar Messages
-
can some one help me I was up dating my Ipad and something went wrong. I am on my computer now.
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
Topic says it all...
My friend started a installation of Windows Vista, but pulled out after deleting all partitions...
So now i power it on, get a blank screen (seems a bit gray because of backlighting, should show the apple logo right?)...
Then after like 15-20sec it will throw out a:
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
I have a OEM Windows Vista DVD in the drive, and i know... Windows 7 is better... but i'm not that fond of stealing software from Microsoft and i have 10 licenses for Vista...
I have tried pressing C while booting up but it doesn't work...
Does anyone here have a magic soloution for me, and no i will not install MacOS on it !!!Deleting Boot Camp partitions the conventional way will not work . You must use the Boot Camp Assistant to remove a Boot Camp partition. Here is a link to the guide.
http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
The way to restart is to hold down the option/alt key during startup* and then selecting the Mac OS. If you have a valid Boot Camp install of Windows it would show up during this type of start up.
* hold down immediately after pressing the power button and until the OS choice screen appears.
To summarize.
1 Use the above method to boot into Mac OS.
2 Download the instructions and read them.
3 Use Boot Camp Assistant to remove the partition.
4 Pick your friends more carefully. -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?
Its possible the App is not available in the Canadian store if the link doesn't work for you.
https://itunes.apple.com/us/app/xfinity-connect/id320788270?mt=8 -
just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now
I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend! -
When I start iTunes, how do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes. Once is enough and no checkbox exists to say "do not show this message....."
Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support -
I tried installing windows and something went wrong and now it seems I have erased Mac OS too because when I turn it on, it says Insert bootable device. Now what should I do?
Welcome to Apple Support Communities
Press Option key on boot and select the OS X partition. If it isn't here, press Command and R keys on boot, open Disk Utility, erase the drive and install Lion or Mountain Lion -
Can not load itunes on windows 7
hi
ican not load itunes 10 on my lap top it give me a message wich is not windows program check with soft weare company to validHi marrs237,
Thanks for using Apple Support Communities. This article has some steps you can take if you are experiencing launch issues with iTunes:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
- Ari -
I was downloading the latest OS and it started to install. Before I knew it the compputer said there was problem installing it, the itouch was put into safe mode and now itunes doesn't see the itouch. I have tried to reinstall itunes. I have restarted the itouch. And nothing I have tried has worked.
No knowing what safe mode is, all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I went to update my iTunes with the new update, but something went wrong..?
Alright, so... I opened iTunes and saw that I had an update available for iTunes. I think It was 7. something, but now I kind of forget. Anyway, I downloaded and installed the update, but in order to complete it I had to restart my computer.
So, I restarted the computer and when it loaded back up, I was surprised to see that it took me to the "Mac OS X Setup Assistant" window, where it said:
"In just a few steps, you can register your Apple product, set up your computer, and sign up for a .Mac membership, which includes a powerful collection of software services specifically designed for your Mac."
And then it asked me what country I lived in and yadda yadda yadda. So basically, it's asking me to re-setup my computer from the very beginning.
I tried filling in all the information to setup my mac again, but when I was done everything and all of the information was filled in and I pressed the "Ok/Done" or whatever you want to call it button, it took me back to the beginning to fill out all of the information again...
Can someone please tell me what is wrong with my Macbook?!
Message was edited by: Snow_Mel
Message was edited by: Snow_MelClick here and follow the instructions.
(30146) -
I was updateing the software on my ipod through the wireless straight to the ipod and had to stop so held down both the power and the home buttons. Now the screen is frozen with the apple logo and the normal 'unfreeze' technique won't work. The computer does not recognise the ipod so will not charge or restore it. Is there anything that I can do myself?
Unplug it and let unit go dead. Then hold your Home button down and plug the USB power cord back in. iTunes should see it and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
I just want to get access to the old account to delete some photos. I dont remember my old number!!
Changing devices is no reason to create a new Apple ID.
All content purchased from iTunes is permanently linked to the Apple ID it was purchased with.
To update apps purchased with the old ID, you MUST sign in with that Apple ID. -
How can I solve this issue?
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
How do I re-install this update? Something went wrong during it and now I can't FaceTime or iMessag
How do i re-install the maverick update?
Download the 10.9.3 combo update from the Apple Downloads site.
http://support.apple.com/kb/DL1746
Or, reinstall by using the Recovery HD.
http://support.apple.com/kb/ht4718
Maybe you are looking for
-
My safari browser seems to be missing on my 3g iphone. How do I get it back?
I seem to have deleted my Safari browser on my 3g iphone. Any idea how to recover or reinstall?
-
Price changes and lack of customer loyalty prevent me from upgrading.
I just spoke to two representatives over chat on this site and on the phone. Bot reps informed me I would have to pay over $30 more per month to simply add a phone line to my account which should only be $10. They will not go outside the "bundles"
-
Maintain folder state in struts in a JSP
Hi I had a requirement of displaying a group of folders in very large numbers in the corresponding Folder hierarchies in a JSP. I acheived it using Ajax calls. This is the set of steps we have adopted 1. When ever a user clicks a Open/Close/add file/
-
Drag and drop Images into Multiple Targets
Hello, I want to alter the NI example "Drag and Drop - Multiple Data Types to Start Drag" to use multiple image Targets. The current VI only allows for dropping image into a single Target. I want to duplicate the target window a few times, in order
-
I have recently acquired a new HP machine, stock from the good people at staples. I have tried to install reader on this machine many times and failed miserably. I download the installer, run it. The progress bar fills to completion, and then.. nothi