Can't load iweb09 site using ftp

I recently upgraded to iweb09. I have successfully published a web site in the past using iweb08 and cyberduck ftp program. I now want to use the new software with built in ftp, but can't get it to upload. I get the following error message:
Unable to write to server. Verify your settings ad try again.
I have verified all settings and login id and they are correct. Any suggestions on what I can try?

Host Excellence is compatible with Mac, Windows and Linux.
However, the main reason for being able to upload is that you can name the folder on the server side the same as the one you are uploading.
This is the method I have always used and it seems to be within the limited capability of the iWeb FTP to do this.
The problem seems to be with Windows servers and those that force you to upload to a preexisting folder which you cannot rename.
I am still publishing to a local folder, not because the FTP doesn't work, but because my websites will not work in IE if I don't optimize the files before upload.
I have been advising users in this forum to publish to a local folder and use an alternative application to upload until the iWeb FTP grows up.
Apple are now advising you to do the same so don't beat your head against a wall and let them figure it out.

Similar Messages

  • Installed CS5, now I can't administer a site using CS4

    I installed CS5 recently. My client still has CS4. She recently changed her ftp pass codes. I updated the connection with Contribute using CS5, but she can not access the site and gets an error message "This site is now being managed by a newer version of Contribute". I cleared the preferences in CS5 and am trying to re-establish the connection for her using CS4...but everytime I do I get half way through the set up process and get an error message saying that the site is already being managed by a newer version of Contribute (even though I have cleared the CS5 preferences in the Library and that site doesn't exist anymore on CS5 version).
    How can I still use the older software for my client who doesn't have CS5? Thanks. Melissa

    1) If the site is adminitered by newer version of Contribute then you can't administer the site using lower version of Contribute.
    2) In the Compatibility is chosen as Transition Mode then the users in lower version can connect, if the mode chosen is Compatibility then they can't connect.
    Please refer to the blog http://blogs.adobe.com/contribute/2009/09/compatibilty_transition_mode.html for more information.
    Hope this help you.

  • Can I load gMax files using Java3D?

    Can I load gMax files using Java3D?
    I need to know this if I am going to use Java for my project.

    What format are the files in? Can you export as .3ds? If you can, there are loaders for these files.
    There are also loaders available for VRML, Obj, etc - see what you can export the file as.

  • Hello there, I can't publish iweb site through FTP

    Hi there, i get as far as"Testing succeeded, you can now publish site to FTP server" I click on publish site then- nothing happens.I've contacted the host site- ipowerweb and set everything up using Filezilla. They say everything is fine their end. Please, please somebody help, I've spent so long on this- life is too short! Ok drama over but would really appreciate some ideas.Thanks,
    Jimmy

    Same is happening here but i have a Mac Mini server hosting locally the website.
    The iWeb version is 3.0.4

  • How can I see Web sites using Adobe Flash Player with my IPad?

    I've realised that it's not possible to visit web sites using Adobe Flash Player.
    Is There a program by which Apple allows you to solve this problem?

    Not from Apple, no, and probably never will be. You can try one of the third-party app/service combinations for playing Flash such as Skyfire , Puffin, or iSwifter. One of those might work for you, though they all have limitations and do not work with all Flash-based sites and services. You may find other suggestions for apps in the many other threads on Flash in this forum.
    Regards.

  • How can I load an applet using Java Plug-in?

    I have written an applet and have tested with appletviewer, but I can't load it from a browser. Ghlin told me that I need to use Java Plug-in to load it. Please tell me how.

    Click on the Products and API link at the top left of this page. Download the Java Plugin. Be sure to get the developers version. Inside that developer's version there is a tool called HTMLConverter. Run HTMLConverter on your HTML and it will modify the applet tag in such a way that if the user already has the Java Plugin then it will use it. IF not, then the user will be asked if he wants to download it.

  • I'm getting "The connection has timed out" when I try to connect to one specific website. I can connect to the site using Internet Explorer. Help?

    As suggested by Firefox, I cleared my history and cache. I also downloaded and ran one of the Firefox recommended malware applications. I also removed Firefox from my firewall and then added it back as suggested by Firefox. I have no problem accessing the site using Internet Explorer.

    Thanks jscher2000. Yes, in Safe Mode I was able to go the site. I read the possible ways that Firefox suggests to try to fix the problem, i.e., go through all my extensions to find the problem or reset Firefox to the original factory settings. Where do you suggest I go from here?

  • Can't load a page using Network Solutions website tool builder using Firefox 5.0.1; they recommend using 3.6! How do I get a copy of 3.6?

    I use Network Solution's Website Tool Builder to manage several websites. Since upgrading Firefox to 5.0.1, some of the pages no longer load and therefore I can't edit them. The sites come up okay in the browser, but not in NetSol's editor. When I called their tech support, they said it was a Firefox problem. They said I need to use Firefox 3.6...Is there a way for me to get a copy of that version of Firefox?

    I need to access Network Solutions website builder too. It isn't compatible with Internet Explorer v9, Chrome v13, or Firefox v5! I believe Firefox v6 is out now. This is a Network Solution's problem. What's involved in rolling back? Can you still get add-ons, plugins, and extensions for such an older version? You can't save your personal preferences can you?

  • I need help!I can´t publish my site through FTP

    Hi there,
    I have recently bought the domain for my site www.jonayvane.com at startlogic.com. I have the account information and password necessary but when I publish the site and i go to "see my site" the URL displayed is http://www.jonayvane.com/www.jonayvane.com_ and I get a 404 error page not found. I have tried not entering a site name for the site so that the second "www.jonayvane.com_" will not appear but I still cant get it to publish because Iweb makes me give it a sight name. I have tried reading similar problems on the forum but I don't quite understand the solutions given and most people have at least already managed to publish their site, which I haven't. At present I am only loading a basic "home" page so I at least don't have to wait for a couple of hours to try out a different option.
    Can anyone help please?
    Thanks a ton,
    Jonathan.

    Do not compound problems by creating other problems.
    First do it the default way. With a sitename iWeb creates by default.
    Did you enter the info to connect to the server correctly :
    Servername (probably ftp.jonayvane.com)
    Username
    Password
    According to your Host's tutorial I understand you can leave the Path/Directory field empty.
    Give it a try.

  • Can I develop a site using Bootstrap and then import into Dreamweaver to update to the free Business Catalyst hosting?

    Can hand generated code be imported into Dreamweaver in order to use the free hosting option?

    BC provides you templates to use to modify and sell to a client.  Otherwise, they wouldn’t be there.  For example, the templates are offered when you go to create a new site. BC asks if you want to use a template, import a site, etc… so your analogy doesn’t apply in this situation.
    TRACI STEIN

  • Can`t load accu completely using an extra USB-charger - using the PC it wor

    Hallo all!
    During my holidays a tried to charge my Zen Micro Photo without having a PC. I tried two methods - first I used a common power supply with 5V and a little workaround with two wires to load the built out accu. It worked fine until the accu was loaded apporximately up to 80%. I thought o.k., it looks that I can't save the money for a special UBS-travel-charger. That was my next step, I bought a little USB-charger (5V / 500mA)and spent nearly 30 Euros - the result was the same! Has anybody an idea or a hint for me?
    Thanks!
    LG
    hans

    I would guess that 500mA is just plain not enough power to charge the device the whole way. I have a Vision:M and the A/C charger it came with is something like 3.6A (3600mA) I believe.

  • How can I load PCL font using command line?

    We have a software that requires a signature font to be uploaded to the printer beforehand.  if the printer power cycles, the font is lost and paper is wasted.  This usually happens when a brown out occurs overnight.
    Our font vendor has a command line windows software that can upload the font to the printer.  It costs 100.00. 
    I'd really love to find a way to upload this file using linux.  The page is generated on linux so i could incorporate the command into that process.
    Anyone know of free software to do this on linux or windows?  or maybe programming documentation?

    i think i found the answer on another site
    http://mdn.morovia.com/kb/Download-Select-Remove-PCL-Fonts-10002.html
    Configuration 2: Network Printer Server
    When the printer is connected to a TCP/IP network directly, the best method is to send commands through lpr command. A TCP/IP device may be identified with a full qualified DNS name, or an IP address. In our test lab, we assigned our network printer a fixed IP address 192.168.1.22, and we use this address in the examples below. Inlpr manual page, it is also referred as Printer Name.
    Another name you will need is Queue Name. The queue names are names assigned to the “processors” in the print server. Many print servers and network printers hardcode their queue names. Some allow you to define your own queue. On HP JetDirect printer servers, the raw PCL queues are named as raw, raw1, raw2 and raw3. In this article we use rawas the queue name.
    Note thatlpr command only accepts 1 file at a time. However, the step1 and step2 commands must be sent in one stream, otherwise the printer discards them altogether. As a result, you will need to merge those three files into one first. On Windows, you can use copy command:
    copy /b C80D.txt +mrvcode39_4pitch.sfp +c5F.txt total.bin
    On Linux/Unix platforms, use cat command:
    cat c80D.txt mrvcode39_4pitch.sfp c5F.txt > total.bin
    Now we can send these files (Windows):
    lpr -S 192.168.1.22 -P raw -ol total.bin lpr -S 192.168.1.22 -P raw -ol data.txt
    You need to replace the IP address, the queue name and the file name with the appropriate ones in your environment.
    On Linux/UNIX platforms, things are more complicated. The configuration varies from platform to platform. Generally you need to set up the printer first. On RedHat Linux, this can be done using printtool. You assign a printer name (queue name) in the configuration, and you use this name in lpr command. Assume that the name is HPPrinter, the lpr command on RH Linux becomes:
    lpr -P HPPrinter -o raw total.bin lpr -P HPPrinter -o raw data.txt

  • I can not upload my site via ftp at godaddy.

    Greetings to all. I hope I can help.
    I use. easy iweb publishing 4 to upload my website on godaddy but not working. What is the best way to upload my website on godaddy, plus easy iweb publishing.

    Use the iWeb FTP...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    ... or publish to a local folder and upload with an FTP application...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Can't load SSL sites when connected to Verizon Hot Spot

    So I'm testing out a Verizon iPhone for my company. Great experience so far; only one dropped phone call!
    Recently, when connected to the internet via the phone's hot spot, I'm no longer able to load SSL websites. A good example of this is logging into gMail. Moreover, I can load the Facebook login page, however I cannot complete login and I can't verify any certificates (or force trust or anything). Moreover, my company/personal e-mail won't load either.
    Once I try to force the certificate, I'm taken to a Verizon page about enabling the Hot Spot feature (which doesn't make sense, since I can browse other sites just fine and the feature is already being paid for by my company).
    Has anyone else experienced this?
    The issue persists on all devices (iPad, other iPhones, computer), I've reset network settings, changed my hot spot password, performed a hard reset; nothing seems to work.

    Those two are essentially the same owners, same place.
    www.screenplay.com...
    Network IP address lookup:
    whois query for 66.226.4.82...
    Results returned from whois.arin.net:
    Alchemy Communications, Inc. ALCHEMY-NET-3 (NET-66-226-0-0-1)
    66.226.0.0 - 66.226.31.255
    Write Brothers WRITEBROTHERS (NET-66-226-4-80-1)
    66.226.4.80 - 66.226.4.95
    # ARIN WHOIS database, last updated 2007-06-04 19:10
    # Enter ? for additional hints on searching ARIN's WHOIS database.
    Results returned from whois.arin.net:
    CustName: Write Brothers
    Address: 138 N. Brand Avenue Suite 201
    City: Glendale
    StateProv: CA
    PostalCode: 91203
    Country: US
    RegDate: 2007-04-24
    Updated: 2007-04-24
    NetRange: 66.226.4.80 - 66.226.4.95
    CIDR: 66.226.4.80/28
    NetName: WRITEBROTHERS
    NetHandle: NET-66-226-4-80-1
    Parent: NET-66-226-0-0-1
    www.write-bros.com...
    Network IP address lookup:
    whois query for 66.226.4.82...
    Results returned from whois.arin.net:
    Alchemy Communications, Inc. ALCHEMY-NET-3 (NET-66-226-0-0-1)
    66.226.0.0 - 66.226.31.255
    Write Brothers WRITEBROTHERS (NET-66-226-4-80-1)
    66.226.4.80 - 66.226.4.95
    # ARIN WHOIS database, last updated 2007-06-04 19:10
    # Enter ? for additional hints on searching ARIN's WHOIS database.
    Results returned from whois.arin.net:
    CustName: Write Brothers
    Address: 138 N. Brand Avenue Suite 201
    City: Glendale
    StateProv: CA
    PostalCode: 91203
    Country: US
    RegDate: 2007-04-24
    Updated: 2007-04-24
    NetRange: 66.226.4.80 - 66.226.4.95
    CIDR: 66.226.4.80/28
    NetName: WRITEBROTHERS
    NetHandle: NET-66-226-4-80-1
    Parent: NET-66-226-0-0-1
    NetType: Reassigned
    Comment:
    RegDate: 2007-04-24
    Updated: 2007-04-24
    I really think it's something with them, but have you tried tweaking the settings yet on the MBP? Like MTU & such?

  • Can I load my ipod using it on another computer?

    Hello please could someone help me ? I have 2 questions:
    1. How can I make the ipod list my audiobooks under audiobooks? It doesn't seem to do that but stores them under music or lists.
    2. I plug my ipod into my pc and it uploads any podcasts automatically. I really only listen to audio books, my own music and mostly podcasts. I travel a lot to Sweden and have to go to the library or a friends for internet use - however I don't know if it is possible to log into my library? One time I downloaded the itunes then logged in and it siad this is registered to anothe rlibrary and it seemed as tho it would wipe the ipod clean and just put what I would get then. My problem is that I would have lost all the other things on my pod and not get them back until I went back home.
    Sorry if this is convoluted I have tried getting help on the helpline but the info was not correct.They said I could log in and did once in this country in another library but not since or abroad.
    Thanks for any help - thank goodness for these boards and your time!

    1. How can I make the ipod list my audiobooks under audiobooks? It doesn't seem to do that but stores them under music or lists.
    See this: http://aldoblog.com/audiobooks/itunes/frequently-asked-questions/#q11
    One time I downloaded the itunes then logged in and it siad this is registered to anothe rlibrary and it seemed as tho it would wipe the ipod clean and just put what I would get then. My problem is that I would have lost all the other things on my pod and not get them back until I went back home.
    See this: http://docs.info.apple.com/article.html?artnum=61675

Maybe you are looking for