Can't load Java applets in Safari
Ever since I installed Snow Leopard, Safari can't load Java applets. I get a blue Lego brick with a question mark, and a message telling me that Java was not found.
Firefox is unaffected, and I get the same error whether Safari is open in 32-bit or 64-bit mode. Programs written in Java, such as Vuze, are unaffected.
Create another admin user account log into it, and see if the problem persists. If not, the issue's within the original account, usually amongst preference (plist) files. If so, then it's system-wide and reinstalling the 10.6.2 COMBO update, repairing permissions, and restarting should do the trick.
Similar Messages
-
Cannot load java applets in Safari
I have several accounts on my machine. In one, the one I use most of the time, Safari will not load java applets. I have checked preferences and compared with those set on the other accounts. They are the same, including enabling javva and javascript. I have removed the Safari plist. I have repaired permissions. I have reset safari, cleared history and caches, used Cocktail to clear caches. I have rebooted.
I set up a new test account and it works fine.
What's going on, and how do I cure it?I will try the pram reset, though I am not confident of it since this problem affects only one account.
On the new account business. I note that when I set up a new account, before I launch safari, there are no files in the Library related to Safari. They are created on the first launch. If I delete them all, then they are recreated on another launch. What if, in the affected user directory, I exported the bookmarks and/or dragged the bookmarks file to the desktop. Then deleted all evidence of safari from the account. I should now have, in effect, a virgin install of safari. Launching it would create all of the necessary files and directories. If safari works with java applets, or does not, I can simply move the bookmarks back in and be no worse off than I was in the beginning.
Any serious fault with that? I am working at home today so cannot do this until I am in the office on Monday. -
Can't load java applet? help please?
I am trying to load a java applet after an upgrade - but security settings are blocking it - please help
Java is no longer supported on Mac OS X 10.6. The security of Java has been found to be so bad, you are lucky to get any Apps that work wtih it. You need a minimum of Mac OS X 10.7.3 to run the latest Java applets and that using Java from http://www.java.com/ See the user tip here to optimize Java under 10.6.8
https://discussions.apple.com/docs/DOC-5532 -
I'm trying to run a Java applet with safari, but everytime I go to the webpage all I get is a grey box with a picture of a coffee cup that has two arrows circling it. Nothing loads after that. Any idea how to fix this?
Hi ad1054,
Are you sure you have java 1.6 and if so, how did you get it? I believe the latest version available from apple is 1.5.0_06. Java 1.6 was only just released by Sun, and, if I'm not mistaken, only for PC and Linux. Apple may be waiting to force people to pay for Leopard to get Java 1.6. (Though you can get a beta version from developer.apple.com.) As Hawaiian_Starman mentioned above, you can check your java version.
That said, you don't have to worry about lower versions of Java because Java is backwards compatible. In fact, if you use Firefox (sorry, but I just checked it in Safari, and got a blank page so I guess Safari, like IE, doesn't support this) and go to "about:plugins" you will see something like
<pre>
Java Embedding Plugin 0.9.5g2
File name: MRJPlugin.plugin
Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Test Your JVM.
MIME Type Description Suffixes Enabled
application/x-java-vm Embedded JVM xjv Yes
application/x-java-applet Embedded Java Applet xja Yes
application/x-java-applet;version=1.1 Embedded Java Applet xja11 Yes
application/x-java-applet;version=1.1.1 Embedded Java Applet xja111 Yes
application/x-java-applet;version=1.1.2 Embedded Java Applet xja112 Yes
application/x-java-applet;version=1.1.3 Embedded Java Applet xja113 Yes
application/x-java-applet;version=1.2 Embedded Java Applet xja12 Yes
application/x-java-applet;version=1.2.1 Embedded Java Applet xja121 Yes
application/x-java-applet;version=1.2.2 Embedded Java Applet xja122 Yes
application/x-java-applet;version=1.3 Embedded Java Applet xja13 Yes
application/x-java-applet;version=1.3.1 Embedded Java Applet xja131 Yes
application/x-java-applet;version=1.4 Embedded Java Applet xja14 Yes
application/x-java-applet;version=1.4.1 Embedded Java Applet xja141 Yes
application/x-java-applet;version=1.4.2 Embedded Java Applet xja142 Yes
application/x-java-applet;version=1.5 Embedded Java Applet xja15 Yes
</pre>
You can see from this list that all versions up to and including the currently installed one are supported. The only thing you have to fear is that the applet you are trying to use was compiled with Java 1.6 and is not itself backwards compatible. However, when I made a test applet of this type, I got a red X, and no coffee cup.
If you see the red X, and I think the coffee cup as well, you should be able to right-click (or ctrl-click) the icon. If so, this will give you a menu with "console" and "about" choices. "About" will give you the version of Java you have, and "console" is supposed to show you the errors that kept the applet from working. (However, with my Java 1.6 test, the console was empty.)
I hope this helps.
1.5GB, 2.16 GHz Core Duo, 15.4" Macbook Pro Mac OS X (10.4.8) -
Can't load "java pulse" on gemplus-card but "HelloWorld"
Hi.
configuration
Reader/Writer : GemPC Twin (USB)
Tool : GemXplore Admin
Card : Gemplus card
Cardlet : Helloworld, JavaPulse (from java.sun site)
I can load "HelloWorld" applet by changing to "HelloWorld.jar" from "HelloWorld.cap"
I'm still not able to understand why I should change ".cap" to ".jar".
But, anyway loading of "HelloWorld" on Gem+ card was done.
The problem is that I can't load "JavaPulse" applet on gem+ card by what I've done for "HelloWorld".
The Compiling, converting, changing to ".jar" from ".cap" was done in same way such as "HelloWorld"
The error message is "69 85" (condition of use not satisfied)
For some detail understanding,
the steps (SELECT, INITIALIZE UPDATE, EXTERNAL AUTHENTICATE, INSTALL FOR LOAD) are done well but the "LOAD" step is failed at all.
I hope you to have a good idea for resolving this problem. Thanx.
Jade.Go to this link
http://www.webct.com/tuneup
and run what they call a browser tuneup. Looks like they will tell you what you need to know. Safari is supported, depending on what part of WebCT you need. -
Hi,
I've done a search on this topic and have not been able to resolve the problem.
The problem being that after trying to "Run a Form on the Web" using test.fmx, The loading java applet message stays in the browser indefinitely.
Some have suggested turning on the JInitiator Console to get a better understanding of the problem.
My problem is that when I click the "Show Java Console" and then "apply" in the JInitiator Control Panal nothing happens. I'm completely new to all of this, is there anything else I have to do to display the Java console?
Java consoles aside, any suggestions as what else I can do? When I first run the form I get an "applet loading" message in the browser status bar for a split second, followed by "exception:http://<servername.domain>/forms60java/f60web.jar"
I'm using IE 5.00 and jinitiator 1.1.7.27
Thanks for any help.
DarrenAnyone knows what's the classid of Jinitiator 1.1.7.31?
Thanks a heap for any replies
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Dhananjay Jawale ([email protected]):
Hi,
Please make sure what Shay has suggested about the correct class id . For Jinitiator 1.1.7.27 it is 093501ce-d290-11d3-a3d6-00c04fa32518
Check your toolbar if you can see a application icon with java cup. If you can get it, maximize it .
This is a known problem with OS like Windows 95.
In my application support, i get calls regarding not able to find the login screen and i help them in same way.
Try it and let us know
Thanks,
Dhananjay<HR></BLOCKQUOTE>
null -
Loading Java Applet Failed in CRM 2007 Web Client Marketing
We have recently upgraded our CRM 4.0 sp6 system to CRM 2007. As part of this upgrade we configured the SAP Best Practice Building Blocks. Logging on to the webclient using the user MKT_MAN (assigned business role BP_MKT_MAN) we get an error when trying to run the Marketing Calendar. the error we get is that "Loading Java Applet Failed" the specific applet in question is: Applet com.sap.crm.mkt.calendar.applet.MktCalendar notinited
We have implemented the following SAP notes to try and rectify the issue but with no success:
Note 1177590 - Version 2.0 of Marketing Calendar java applet
Note 1237477 - Marketing Calendar is not displayed, Tensegrity Library
Any ideas as to what can resolve this issue
Thanks in advance
EddieHi Eddie
I have exactly the same problem, using IE 6.0 & JRE 1.4.2_07.
What I have found is that users in my company with the same configuration on their machines, same settings as above can load the Marketing Calendar without issue.
Have loaded the same notes as yourself already.
I have managed to get it to working by switching off my proxy settings entirely. This is fine for testing but of no use for go live.
I have also found that when it does finally load successfully it is incredibly slow in comparison to other functionality within the WEB UI.
Thus far I have logged an OSS Message regarding this matter, could I recommend you do the same, this should encourage SAP that the issue is not isolated.
Good Luck
Arden -
Load: class oracle.forms.engine.Main not found Stuck at loading Java Applet
Hi there
I have recently installed App Server 10.1.2.0 on a new machine.
Copied all my forms to an appropriate directory. Set up formsweb.cfg to allow them to run and have attempted to run them.
Unfortunately I get stuck at the Loading Java Applet screen, and in the status bar at the bottom it says :
load: class oracle.forms.engine.Main not found
I have taken a look at the Java Console, and the 2 things that jump out at me are that it appears to be looking for a forms90 directory, which seems odd since I am using App Server 10.1.2.0.2 and Forms Builder 10.1.2.0.2 meaning it should be looking in a forms directory not forms90 directory shouldnt it ?
And also, it mentions class with no proxy, so on looking around the forums it has been suggested that put the proxy details into jinitiator, which I have done, but this has made no difference either.
Can anyone suggest anything else please ?
Java Console log follows.
Thanks a lot
Scott
Oracle JInitiator: Version 1.3.1.9
Using JRE version 1.3.1.9 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\hilliers
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Unregistered modality listener
Removed trace listener: sun.plugin.ocx.ActiveXAppletViewer[oracle.forms.engine.Main,0,0,914x613,layout=java.awt.BorderLayout]
Sending events to applet. STOP
Sending events to applet. DESTROY
Sending events to applet. DISPOSE
Sending events to applet. QUIT
Finding information...
Releasing classloader: sun.plugin.ClassLoaderInfo@d9850, refcount=0
Caching classloader: sun.plugin.ClassLoaderInfo@d9850
Current classloader cache size: 1
Done...
Registered modality listener
Referencing classloader: sun.plugin.ClassLoaderInfo@d9850, refcount=1
Added trace listener: sun.plugin.ocx.ActiveXAppletViewer[oracle.forms.engine.Main,0,0,914x613,invalid,layout=java.awt.BorderLayout]
Sending events to applet. LOAD
Sending events to applet. INIT
Sending events to applet. START
Determine if the applet requests to install any HTML page
HTML Installation finished.
Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
Connecting http://appserver008/forms90/java/oracle/forms/engine/Main.class with no proxy
Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
Connecting http://appserver008/forms90/java/oracle/forms/engine/Main.class with no proxy
load: class oracle.forms.engine.Main not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)You're a star, thanks.
In my haste I had cut too much out of my old formsweb.cfg file and not realised I'd done it.
Thanks Francois. -
I am surprised to find out that all of a sudden the applet (java) can't load properly.
Before today, 31 July, I was able to use any website that require java platform and the applet doesn't have any problem loading. For example, I could go to a bank's website to do internet banking and transfer. Today, I couldn't.
I've tried many methods that I've come across in the web community but nothing is helping.
Please help!
Julia
PS: My Macbook's on Lion OS and my iMac on Snow Leopard... both can't load the applet / Java platform.The latest drivers here:
http://support.apple.com/kb/DL1398
The new driver is 9.04 -
I downloaded and installed j2se_1.4.1. Now every time I go to a site which needs the java applet, it gives "error loading java applet" (or something like that). I already uninstalled it and reinstalled it, but I keep getting that error. Can someone help me out please??
I use win XP home and Internet Eplorer 6
thanxI also have the same problem!
can someone help us PLEASE ?!!! -
Loading Java Applet Failed... HELP ME PLEASE !
Hello,
Recently I can not view Java applets.
This is what I see in the console :
Java Plug-in 1.5.0_06
Using JRE version 1.5.0_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\?????
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class loader.class not found.
java.lang.ClassNotFoundException: loader.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 morePlease, help me, I really need it.This line:
User home directory = C:\Documents and Settings\?????
is odd - what are the question marks doing there? They should be naming the user's directory. Have you used non-ASCII characters for the directory name?
If so, you might want to try installing under a different user. -
Loading Java Applet Failed : Getting Red "X"
Hi all
I have JRE 1.6.0_07 loaded on my machine. When i try to access a particular website from my machine i can see an orange Java Logo and then after some time i get a "Red" "X" on top left with a message in bottom of browser
"Loading Java Applet Failed".
I am Using IE 6.0.2900.2180.xpsb_sp2...on a Windows XP SP2 Professional .
I also get a Error Message as
"General Exception"
Name - Batchmanage
Java.lang.classnotfoundexception.batch.class
1) However when i disable Options ==> Advance ==> Java(Sun) ==> Use JRE 1.6.0_07 for <applet>
and enable Options ==> Advance ==> Microsoft VM ==> Jit Compiler for VM enabled
Application runs fine.
2) But if i Enable Options ==> Advance ==> Java(Sun) ==> Use JRE 1.6.0_07 for <applet>
and disable Options ==> Advance ==> Microsoft VM ==> Jit Compiler for VM enabled
Applications Give error mentioned above and Red X
3) Similary if i enable Options ==> Advance ==> Java(Sun) ==> Use JRE 1.6.0_07 for <applet>
As well as enable Options ==> Advance ==> Microsoft VM ==> Jit Compiler for VM enabled
Still Application Gives error mentioned above and Red X
For some machines we have observed that it runs fine with Java (Sun) enabled with no Microsoft VM
Any advise or help would be appreciated
ThanksHi,
I am facing the similar problem and following is my applet code which is causing the problem.
Can you please help me out?
*<applet name="lic_install" archive="gias/sign_lic_install.jar" codebase="/irj/portalapps/com.test/applet" code="gias/step4calicenses.class" width=200 height=75px>*
*<param name="sitelicenseurl" value="http://abc.test.com/irj/servlet/prt/portal/prtroot/com.test.DownloadALPLicenses" >*
*<param name="siteProdcodesURL" value="http://abc.test.com/licenses/applet/gias/prod_codes.txt" >*
*<param name="siteLic98URL" value="http://abc.test.com/licenses/applet/gias/lic98.cap" >*
*<param name="siteGetRegistryValDll" value="http://abc.test.com/licenses/applet/gias/step4jnigetpath.dll" >*
*<param name="siteMergeWinEXE" value="http://abc.test.com/licenses/applet/gias/mergeolf.exe" >*
*</applet>* -
Hi!
When I try to run the Sun demo SwingSet2, IE(5.0) hangs.
First I installed JRE 1.3.1(on advice of the demo site.)
Then it all end up with the text "Loading Java Applet..."
in the grey box.
I have also tried to install different JRE versions but I just can't run a Sun demo applet (neither my own applets).
I would be very happy if someone could solve this problem.
/Jonas
InternetExplorer: 5.00.3315.1000
Windows 2000Hi:
I just have a comment and one last suggestion.
First, I am able to run the SwingSet2Plugin.html with both IE5.0 and IE5.5 on Windows 98SE. I am currently using JDK/JRE1.3.1. A few months ago, I upgraded to 1.3.1_02 and found that some of my applets stopped working for no apparent reason, so I went back to 1.3.1.
If your applets stopped working because of an upgrade in JDK or JRE and you're using Windows, I suggest that you make sure that the previous version of the JDK/JRE were cleanly removed from the system. You can verify this by going to the Control Panel and click on Add/Remove Program to see if there are multiple versions of the software. Also, click start, run REGEDIT and look in the following folder for any remaining references to the JDK/JRE:
HKEY_LOCAL_MACHINE-->Software-->Microsoft-->Code Store Database-->Distribution Units
look for something with {...} or the prefix {CAFE... and remove any remaing older versions (I know most people wouldn't touch regedit with a ten-foot pole but this may be the only way to solve the problem).
I use a lot of applet and am particularly interested in cases where ppl have problems with using applet and find out how the problems are resolved. If my suggestions worked or if you find out what caused the problem, I would appreciate your sharing the info.
Good Luck!
V.V.
-
Loading Java Applet Failed...Anyone please help.
I am using JDeveloper 10.1.3
Package: c17UPackage
Java Applet: C17UPoloTestApplet.java
Applet Html: C17UPoloTestHtml.html
When I run C17UPoloTestHtml.html using Embedded OC4J server the HTML pages give me this error "Applet c17UPackage.view.C17UPoloTestApplet notinited" and "Loading Java Applet Failed...".
In the Java Console it give me this error:
java.lang.InstantiationError: oracle.jbo.JboException
at oracle.jbo.common.JBOClass.initLoader(JBOClass.java:93)
at oracle.jbo.common.JBOClass.<clinit>(JBOClass.java:34)
at oracle.jbo.common.StringManagerFactory.create(StringManagerFactory.java:112)
at oracle.jbo.common.StringManager.getSingleton(StringManager.java:110)
at oracle.jbo.common.StringManager.getLocalizedString(StringManager.java:313)
at oracle.jbo.common.StringManager.getLocalizedString(StringManager.java:286)
at oracle.jbo.common.StringManager.getString(StringManager.java:226)
at oracle.jbo.uicli.UIMessageBundle.getResString(UIMessageBundle.java:375)
at oracle.jbo.uicli.controls.JUNavigationBar.<clinit>(JUNavigationBar.java:188)
at c17UPackage.view.C17UPoloTestApplet.$init$(C17UPoloTestApplet.java:30)
at c17UPackage.view.C17UPoloTestApplet.<init>(C17UPoloTestApplet.java:33)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
All the package(c17UPackage, oracle.jbo, oracle.binding, oracle.adf, com.jgoodies and com.sun) I store in the same directory as applet html(C17UPoloTestHtml.html).
How to solve this problem? Anyone please help?
Thanks You.In one of my project i tried to load applet using the <jsp:plugin> tag but failed. Since i had less time so i have not done the R&D instead i called the applet as
<applet id="MyApplet" code="MyApplet.class\" archive=\"MyApplet.jar\" width=5 height=3/>and it worked fine for me. You can try this method.
NOTE: My applet jar file was in the same directory of my JSP page
Message was edited by:
diptaPB -
Nothing happening after LOADING JAVA applet
Today since morning I have been facing a problem with my forms....when i complile and run my form... the browser opens with the message loading java applet
But the forms doesnt seems to open....it gets stuck at this particular point..! dont know why...
Note:It was working fine till yestardaydepending on your browser's version, make sure the address you are opening is found in your "safe" list.
If you're using IE make sure you have the address in your trusted sites. Sometimes Windows DEP (Data Execution Prevention) also stops the browser from opening.
Also make sure your network is not blocking the site.
Tony
Maybe you are looking for
-
Hi, I need to print date and time with some spaces in between on the same line. But when i'm trying to append data and time with spaces into it_listheader, it's getting printed side by side without spaces. requirement: 22/01/2008 22:13:58 what
-
Why does iPhoto not launch after update to version 9.3.2?
Double clicking the application icon causes it to bounce 3 or 4 times in the dock and then quits. Trying to open with command + option will not launch for a rebuild. Holding down the option key illicits the same behavior. How can I downgrade to 9.3.1
-
How can i add a calender in my form
Dear all i am using 10G form. I have Date field and a button near to it . I want when i pressed button one calender should display and i can select the date . How can i do this ?
-
Tracking Credit Limit Change History
Hi, Does anyone know what tables I would need to look at to track changes to a customer's credit limit? Also any key fields I would need to take note of? I need to create a SQL query to report on credit limit changes per customer. Thanks, Michael
-
Hello All, I'm using the FM REUSE_ALV_BLOCK_LIST_DISPLAY. I'm getting the Output from the Block List FMs as intended. But when I'm performing any action on user-command the program is going for a dump saying : Field symbol has not yet been assigned.