Can't load master files into iPhoto

I imported photos in iPhoto using an SD card, I downloded them. At that point I thought tyhey would be in my photo library I downloaded in about 1000 photos. It says they are in pictures/iPhoto library/masters/ 2013/03/24/2013 etc but I tried to bring thm into iPhoto and it says I can't. Do I have to reimport all these photos or is therte a procedure to getting them into an album?

You need to explain what you are doing and what problem you are having - your post makes no sense
I imported photos in iPhoto using an SD card,
Ok so far
I downloded them.
But what does this mean?
At that point I thought tyhey would be in my photo library
By default they are
I downloaded in about 1000 photos. It says they are in pictures/iPhoto library/masters/ 2013/03/24/2013 etc
What is "It" - when using iPhoto you never see nor access the files within the iPhoto library - you only access them using iPhoto - to see the masters folder you are accessing the iPhoto library using teh finder - something you do not do
but I tried to bring thm into iPhoto
Again what does this mean? - you have imported them to iPhoto so they are in iPhoto - Please explain what you are doing and why
and it says I can't
Again - what is "It" - and exactly what does "it" say - again please exactly what you are doing and why
Do I have to reimport all these photos
No why would you? why do you ask? Did "it" say you needed to?
is therte a procedure to getting them into an album?
the procedure for getting photos into an album is to select the photos and create an album (file menu ==> new album)
LN

Similar Messages

Can't load Raw files into Lightroom 3 form my Nikon D7100

Can't load Raw files into Lightroom 3 form my Nikon D7100... Why?

TGTruman wrote:
How do I convert the Nef to DNG files...
Download the Adobe DNG Converter (and install it, and run it...).
Note: an internet search will reveal a link in short order.
TGTruman wrote:
I don't mind going to LR5, just don't want to spend the money and then not have it work...
So use the trial first. No?
R

Can't load m4v files into Photoshop

I created a H264 Blu-ray (m4v) using Adobe Premiere Pro CS4. It was a exported as 1080i file. I tried to load this file into Photoshop CS4 extended. Photoshop says that it "could not complete your request because the movie file could not be opened". Can anyone help as it is important to me to apply some Photoshop to fix overexposure which it does superbly to a Quick Time (720*480) file. I want to do the same for 1080i file.
Thx
Sundar

I initially captured the clip as .MTS in 1080. Using premiere CS4, I exported part of the clip as H264 Blu-Ray (m4v). If I try QT as output format, it is of lower resolution. You are right that Photoshop does not have problem in pulling in QT clips.
You answered your own question. H.264 BluRay is a multiplexed sub-format of H.264 which is not compatible with QT's implementation of H.264. If you want to use H.264, you must export normal H.264 and the profile level must be set to 3.1, basic in the exporter. Then, after export, you simply rename the file to *.mov. That aside, you can always use alternate Quicktime CoDecs like PNG or PhotoJPEG and directly export to a MOV. Your loss in quality is due to incorrect field settings, so that needs to be set properly. It merely doesn't affect your H.264 output, because there everything is set correctly already in the presets.
Mylenium

IPhoto: How can I import pdf files into iPhoto?

It seemed to work before but I can no longer import pdf files into iPhoto. What heppened and how can fix it? Many thanks in advance ... Abe

Have you tried opening the PDF in Preview and printing using the PDF option selecting save PDF to iPhoto?
LN

How can I import DNG files into iPhoto 8?

Shooting with a Canon Rebel XT, I've downloaded RAW files onto my hard drive, edited them in Adobe Camera Raw (ACR) and saved them as digital negatives (DNG) with the .dng extension. Bridge and iPhoto work with these just fine, but iPhoto doesn't seem to want to import them.
Aside from saving them as jpegs or TIFFs, is there any way to get these files to play nice with iPhoto 8?

I'm having the same problem with iPhoto after editing my images in Bridge and converting the files to DNG before importing to iPhoto. The metadata on the DNG file will not show up in iPhoto when I import DNG files. Yet, if I convert the DNG files to JPEG and import the JPEG files into iPhoto all the metadata and keywords in the original DNG files is imported. I use Bridge and CS3 for editing but want to use iPhoto for asset management.

Can't import .pdf file into iphoto

I think the problem is that I had taped pics onto 8.5x11 paper and at copy shop they scanned into a .pdf file which has 8 pages of pics. What I want to do is find a way to drag pics off of a page into iphoto to email to family.
Maybe this is impossible? I don't have a scanner, is why I went to copy shop.
I can view the pages in PREVIEW and in ADOBE reader, and try to highlight pic and copy into iphoto, but it only shows a part of top of image.
I also tried in Adobe Reader the menus: Tools/Select and zoom/snapshot and it shows "copied to clipboard" but when try to go into iphoto to paste, the PASTE word is greyed out; same if try to paste to desktop. Any ideas how to get photo's off .pdf file? TKS ahead for help!

In preview go to print and click PDF and select send PDF to iPhoto . In iPhoto duplicate the resulting image and crop to a photo and repeat as needed
LN

How can i load Metadata file into georaster?

Hello everybody,
I stone a tiff file in my db,I stone tiff file like this:
1.create GeoRaster Table:
create table rm_image_t(
georid number,
file_type varchar2(30),
image_file mdsys.sdo_georaster);
2.create trigger:
exec sdo_geor_utl.createdmltrigger('rm_image_t','image_file');
3.Create raster data table:
create table rdt1 of mdsys.sdo_raster(
primary key(rasterid,pyramidlevel,bandblocknumber,rowblocknumber,columnblocknumber))
lob(rasterblock) store as (nocache nologging);
4.Grant:
exec dbms_java.grant_permission('OPER','SYS:java.io.FilePermission','c:\aaa.tif','read');
call dbms_java.grant_permission('MDSYS','SYS:java.io.FilePermission','c:\aaa.tif','read' );
call dbms_java.grant_permission('OPER','SYS:java.io.FilePermission', 'c:\aaa.tif','read' );
call dbms_java.grant_permission('PUBLIC','SYS:java.io.FilePermission','c:\aaa.tif','read' );
call dbms_java.grant_permission('MDSYS','SYS:java.io.FilePermission','c:\aaa.tif','read' );
call dbms_java.grant_permission('OPER','SYS:java.io.FilePermission', 'c:\aaa.tif','read');
call dbms_java.grant_permission('PUBLIC','SYS:java.io.FilePermission','c:\aaa.tif','read');
5.Insert tiff file:
DECLARE
geor SDO_GEORASTER;
BEGIN
-- Initialize an empty GeoRaster object into which the external image
-- is to be imported.
INSERT INTO rm_image_t
values( 1, 'TIFF', sdo_geor.init('rdt1') );
-- Import the TIFF image.
SELECT image_file INTO geor FROM rm_image_t
WHERE georid = 1 FOR UPDATE;
sdo_geor.importFrom(geor,'blocksize=(512,512) compression=DEFLATE', 'TIFF', 'file','c:\aaa.tif');
UPDATE rm_image_t SET image_file = geor WHERE georid = 1;
COMMIT;
END;
Then:
SQL> SELECT t.georid,
2 sdo_geor.validategeoraster(t.image_file) isvalid
3 from rm_image_t t order by georid;
GEORID ISVALID
1 TRUE
But I do not know how to load tiff_file's metadata into georaster.
Can you help me?thanks!

My metadata file called aaa.met,it has the following info:
GROUP = METADATA_FILE
     PRODUCT_CREATION_TIME = 2004-02-12T15:09:20Z
     PRODUCT_FILE_SIZE = 703.1
     STATION_ID = "EDC"
     GROUND_STATION = "SGS"
     GROUP = ORTHO_PRODUCT_METADATA
          SPACECRAFT_ID = "Landsat7"
          SENSOR_ID = "ETM+"
          ACQUISITION_DATE = 2001-10-03
          WRS_PATH = 138
          WRS_ROW = 036
          SCENE_CENTER_LAT = +34.6152272
          SCENE_CENTER_LON = +91.7569675
          SCENE_UL_CORNER_LAT = +35.5648302
          SCENE_UL_CORNER_LON = +90.9958720
          SCENE_UR_CORNER_LAT = +35.2772270
          SCENE_UR_CORNER_LON = +92.9740331
          SCENE_LL_CORNER_LAT = +33.9414953
          SCENE_LL_CORNER_LON = +90.5596099
          SCENE_LR_CORNER_LAT = +33.6605964
          SCENE_LR_CORNER_LON = +92.5005228
          SCENE_UL_CORNER_MAPX = 318373.500
          SCENE_UL_CORNER_MAPY = 3937531.500
          SCENE_UR_CORNER_MAPX = 497638.500
          SCENE_UR_CORNER_MAPY = 3903787.500
          SCENE_LL_CORNER_MAPX = 274455.000
          SCENE_LL_CORNER_MAPY = 3758352.000
          SCENE_LR_CORNER_MAPX = 453691.500
          SCENE_LR_CORNER_MAPY = 3724636.500
          BAND1_FILE_NAME = "aaa.tif"
          GROUP = PROJECTION_PARAMETERS
               REFERENCE_DATUM = "WGS84"
               REFERENCE_ELLIPSOID = "WGS84"
               GRID_CELL_ORIGIN = "Center"
               UL_GRID_LINE_NUMBER = 1
               UL_GRID_SAMPLE_NUMBER = 1
               GRID_INCREMENT_UNIT = "Meters"
               GRID_CELL_SIZE_PAN = 14.250
               GRID_CELL_SIZE_THM = 57.000
               GRID_CELL_SIZE_REF = 28.500
               FALSE_NORTHING = 0
               ORIENTATION = "NUP"
               RESAMPLING_OPTION = "NN"
               MAP_PROJECTION = "UTM"
          END_GROUP = PROJECTION_PARAMETERS
          GROUP = UTM_PARAMETERS
               ZONE_NUMBER = +46
          END_GROUP = UTM_PARAMETERS
          SUN_AZIMUTH = 147.9348938
          SUN_ELEVATION = 46.4220192
          QA_PERCENT_MISSING_DATA = 0
          CLOUD_COVER = 0
          PRODUCT_SAMPLES_PAN = 17814
          PRODUCT_LINES_PAN = 15754
          PRODUCT_SAMPLES_REF = 8907
          PRODUCT_LINES_REF = 7877
          PRODUCT_SAMPLES_THM = 4454
          PRODUCT_LINES_THM = 3939
          OUTPUT_FORMAT = "GEOTIFF"
     END_GROUP = ORTHO_PRODUCT_METADATA
     GROUP = L1G_PRODUCT_METADATA
          BAND_COMBINATION = "123456678"
          CPF_FILE_NAME = "L7CPF20011001_20011231_04"
          GROUP = MIN_MAX_RADIANCE
               LMAX_BAND1 = 191.600
               LMIN_BAND1 = -6.200
               LMAX_BAND2 = 196.500
               LMIN_BAND2 = -6.400
               LMAX_BAND3 = 152.900
               LMIN_BAND3 = -5.000
               LMAX_BAND4 = 241.100
               LMIN_BAND4 = -5.100
               LMAX_BAND5 = 31.060
               LMIN_BAND5 = -1.000
               LMAX_BAND61 = 17.040
               LMIN_BAND61 = 0.000
               LMAX_BAND62 = 12.650
               LMIN_BAND62 = 3.200
               LMAX_BAND7 = 10.800
               LMIN_BAND7 = -0.350
               LMAX_BAND8 = 243.100
               LMIN_BAND8 = -4.700
          END_GROUP = MIN_MAX_RADIANCE
          GROUP = MIN_MAX_PIXEL_VALUE
               QCALMAX_BAND1 = 255.0
               QCALMIN_BAND1 = 1.0
               QCALMAX_BAND2 = 255.0
               QCALMIN_BAND2 = 1.0
               QCALMAX_BAND3 = 255.0
               QCALMIN_BAND3 = 1.0
               QCALMAX_BAND4 = 255.0
               QCALMIN_BAND4 = 1.0
               QCALMAX_BAND5 = 255.0
               QCALMIN_BAND5 = 1.0
               QCALMAX_BAND61 = 255.0
               QCALMIN_BAND61 = 1.0
               QCALMAX_BAND62 = 255.0
               QCALMIN_BAND62 = 1.0
               QCALMAX_BAND7 = 255.0
               QCALMIN_BAND7 = 1.0
               QCALMAX_BAND8 = 255.0
               QCALMIN_BAND8 = 1.0
          END_GROUP = MIN_MAX_PIXEL_VALUE
          GROUP = PRODUCT_PARAMETERS
               CORRECTION_METHOD_GAIN_BAND1 = "CPF"
               CORRECTION_METHOD_GAIN_BAND2 = "CPF"
               CORRECTION_METHOD_GAIN_BAND3 = "CPF"
               CORRECTION_METHOD_GAIN_BAND4 = "CPF"
               CORRECTION_METHOD_GAIN_BAND5 = "CPF"
               CORRECTION_METHOD_GAIN_BAND61 = "CPF"
               CORRECTION_METHOD_GAIN_BAND62 = "CPF"
               CORRECTION_METHOD_GAIN_BAND7 = "CPF"
               CORRECTION_METHOD_GAIN_BAND8 = "CPF"
               CORRECTION_METHOD_BIAS = "IC"
               BAND1_GAIN = "H"
               BAND2_GAIN = "H"
               BAND3_GAIN = "H"
               BAND4_GAIN = "L"
               BAND5_GAIN = "H"
               BAND6_GAIN1 = "L"
               BAND6_GAIN2 = "H"
               BAND7_GAIN = "H"
               BAND8_GAIN = "L"
               BAND1_GAIN_CHANGE = "0"
               BAND2_GAIN_CHANGE = "0"
               BAND3_GAIN_CHANGE = "0"
               BAND4_GAIN_CHANGE = "0"
               BAND5_GAIN_CHANGE = "0"
               BAND6_GAIN_CHANGE1 = "0"
               BAND6_GAIN_CHANGE2 = "0"
               BAND7_GAIN_CHANGE = "0"
               BAND8_GAIN_CHANGE = "0"
               BAND1_SL_GAIN_CHANGE = "0"
               BAND2_SL_GAIN_CHANGE = "0"
               BAND3_SL_GAIN_CHANGE = "0"
               BAND4_SL_GAIN_CHANGE = "0"
               BAND5_SL_GAIN_CHANGE = "0"
               BAND6_SL_GAIN_CHANGE1 = "0"
               BAND6_SL_GAIN_CHANGE2 = "0"
               BAND7_SL_GAIN_CHANGE = "0"
               BAND8_SL_GAIN_CHANGE = "0"
          END_GROUP = PRODUCT_PARAMETERS
          GROUP = CORRECTIONS_APPLIED
               STRIPING_BAND1 = "NONE"
               STRIPING_BAND2 = "NONE"
               STRIPING_BAND3 = "NONE"
               STRIPING_BAND4 = "NONE"
               STRIPING_BAND5 = "NONE"
               STRIPING_BAND61 = "NONE"
               STRIPING_BAND62 = "NONE"
               STRIPING_BAND7 = "NONE"
               STRIPING_BAND8 = "NONE"
               BANDING = "N"
               COHERENT_NOISE = "N"
               MEMORY_EFFECT = "N"
               SCAN_CORRELATED_SHIFT = "N"
               INOPERABLE_DETECTORS = "N"
               DROPPED_LINES = N
          END_GROUP = CORRECTIONS_APPLIED
     END_GROUP = L1G_PRODUCT_METADATA
END_GROUP = METADATA_FILE
END
I want load it into db and query the tif_file use coordinates.
Can you pls tell me how to do it?

Can't import RAW files into iPhoto 6 Library from Nikon D700

For whatever reason I am unable to import RAW files from my Nikon D700 into my iPhoto 6 (version 6.0.6) Library. I can import JPEGs from the D700, but it's no-go with the RAW files. When I attempt to import the RAW files I get the following message:
"Unreadable Files
The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)."
Can anybody solve this mystery for me?
Bob

Bob
I presume that the economically-priced Mac Box Set containing OS X 10.5.6 Leopard, iLife '09, and iWork '09 would be the way to go. Do you concur?
Well that's the cheapest way to do it. You could, of course, buy a new Mac
Do you feel that my 20" Intel iMac--details listed below--would have any problems handling the upgraded programs?
It will have no problems with the updated OS or applications.
'm uneasy at the thought of upgrading my operating system, but I presume that chances of running into problems are much less than if I were upgrading a Windows OS. In case a problem arises my entire hard drive is backed up with a 1T external hard drive using SuperDuper software, but I prefer not to encounter a situation requiring me to use it for restoration purposes.
The key to any update or upgrade is to make sure that you have a good working back up. That way, should anything go wrong, you have a quick way back to where you started.
My tips for upgrading the OS? Disconnect the disk with the back up and all other peripherals when you do the Upgrade. Pop the disk in. Do a standard Upgrade. (There are some folks who swear that you should wipe your HD and start over from scratch before you do, but, frankly, that's overkill. I've been upgrading Macs since 1992 and never had a problem.
Regards
TD

How can i import raw files into iphoto from my Nikon D300?

Just got a Nikon D300, and it will import jpg and tff, but not raw (nef) files-i prefer iphoto to their software- Nikon says to try talking to apple to find a way to do it- does anyone know any info that can help? I need to decide if I am keeping the camera-from other posts it doesn't look like buying aperture will help either- thanks.

I would not ditch a camera because of this! If you like the camera, there will always be a way to import Canikon RAW files, though you may need to do some upgrading, and it may take some time for Apple to support a new camera.
Message was edited by: Keith Barkley

Load jar file into Oracle db 10.1.0.2.0.

Hi,
I am trying to create a Java Stored procedure that is dependent on some other classes. The java source doesn't compile since it cannot find the imported libs.
How can I load jar files into the database so I can get my java source to compile?
I have heard of dbms_java.loadjava procedure, but not very clear on how to use it.
Please let me know how I can load the jar files in to the db.
Thanks,
-- DR.

http://oraclesvca2.oracle.com/docs/cd/B12037_01/java.101/b12021/dbms_jav.htm

How can I stop downloading pictures into iPhoto and start down loading into a portable hard drive?

How can I stop downloading pictures into iPhoto and start down loading into a portable hard drive?

You could use the Image Capture application.

Can I reuse objects without Master data and load master data into it?

Hai,
I have a standard object that doesnot have Master data. Its already used somewhere else. It matches the name I want but I need to load some master data into it. Does resuing it in my catalogue and loading Master data into it hurt anything? Or should I create a new one?
Thank you.

Hi Visu,
The same InfoObject can be included in more than one InfoObject catalog without any issue. Also loading master data would not hurt an existing InfoProviders where it is being used.
Hope this helps...

Can I import a *.mov file into iPhoto?

Can I import a *.mov file into iPhoto? If so, how?

Yes. Open iPhoto:
File > Import to Library... > select the .move file > Import

I can not load jpg. files or pdf into Id.

I have already dealt with my schools IT and they were unable to assist. After not being able to load these files into Id cs6, I went to CC and still no luck.

Update to previous post... when attempting to push file into Adobe Id I get this response, (Cannot open file "_____" Adobe Id may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application.) I have searched for updates several times, and CC and CS6 both are up to date. I have tried opening numerous files that are both jpg. and psd. none of them even ones that previously were opened in Id, and no luck.

Importing Photoshop Elements 6.0 .psd files into iPhoto

Hey everyone. I am trying to import a bunch of .psd files into iPhoto to keep them organized. Some import just fine, for others though, the thumbnail gets all screwed up. It's almost like there are shapes clipped out of the real .psd file. When I open the file in PSE everything looks fine. It's just the thumbnail in iPhoto that is all messed up. Does anyone know how I can fix this? Thanks for your time.

This is what I found in the PSE 6 Help file:
"Masks, which let you manipulate, isolate, and protect specific parts of an image. In Photoshop Elements, alpha channels are called saved selections. To save an alpha channel, choose Select > Save Selection. To load an alpha channel, choose Select > Load Selection."
Go to the Select menu in PSE6 and select the last option, Delete selection. It should be useable. That will let the image be fully displayed in iPhoto. You can set PSE6 as the editor of choice in iPhoto as described below:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
OT

Can't load master files into iPhoto

Similar Messages

Maybe you are looking for