Can't load Raw files into Lightroom 3 form my Nikon D7100

Can't load Raw files into Lightroom 3 form my Nikon D7100... Why?

TGTruman wrote:
How do I convert the Nef to DNG files...
Download the Adobe DNG Converter (and install it, and run it...).
Note: an internet search will reveal a link in short order.
TGTruman wrote:
I don't mind going to LR5, just don't want to spend the money and then not have it work...
So use the trial first. No?
R

Similar Messages

  • I can't import raw files into lightroom

    I have been using lightroom 4. I shoot with a nikon d300s. I recently used a nikon D610 and now it says preview not available. It also says the the raw images aren't able to import. So I recently upgraded to Lightroom 5 and it still says preview not available. I need some suggestions on how to import them.

    I don't use nikon software.  I just use lightroom. I just got lightroom 5. I tried to update to 5.3 but couldn't find the location where to find it.
    Sent from Yahoo Mail on Android
    From:"dj_paige" <[email protected]>
    Date:Thu, Apr 23, 2015 at 10:22 AM
    Subject:[Photoshop Lightroom] I can't import raw files into lightroom
    I can't import raw files into lightroom
    created by dj_paige in Photoshop Lightroom - View the full discussion
    Do you have Lightroom 5.3 or higher?
    Did you use Nikon software at any point on these photos?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7470470#7470470 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7470470#7470470
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"      
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How can i import raw files into iphoto from my Nikon D300?

    Just got a Nikon D300, and it will import jpg and tff, but not raw (nef) files-i prefer iphoto to their software- Nikon says to try talking to apple to find a way to do it- does anyone know any info that can help? I need to decide if I am keeping the camera-from other posts it doesn't look like buying aperture will help either- thanks.

    I would not ditch a camera because of this! If you like the camera, there will always be a way to import Canikon RAW files, though you may need to do some upgrading, and it may take some time for Apple to support a new camera.
    Message was edited by: Keith Barkley

  • Can't open Raw files in Photoshop CS6 using Nikon D7100?

    I have a Nikon D7100 and recently did a photoshoot where I shot in Raw. Upon uploading my images and then attempting to open them in Photoshop it came up with a pop up saying that photoshop is unable to open that camera raw file. I have downloaded the adobe recommended converters but those don't seem to work either. Help?

    The Nikon D7100 didn't get support until Camera Raw version 7.4; CS6 shipped with 7.0 (and is compatible up until 8.3). Did you go through Help > Updates?
    Also, versions of Camera Raw above version 8.3 won't work on anything below Windows 7 or Mac 10.7. You'll have to "upgrade" to at most 8.3 to continue using it on the other operating systems.

  • Hi, I just downloaded a bunch of RAW files into Lightroom 5.6 and they all look like they've been put through acid. Can someone please help? TYVM!

    Hi, I just downloaded a bunch of RAW files into Lightroom 5.6 and they all look like they've been put through acid. Can someone please help? TYVM!

    Jim and Rob, thank you for taking your time to respond. I have a mac & a pc with 4 gigs of RAM in each. I originally experienced the problem on my mac and afterwards the same thing happened on the pc. I shoot with a canon 5d mark iii and never had this problem before, but what I'm realizing is that I'm running out of space on both the mac & the pc. After an afternoon of shooting today, I filled up a 32-gig card, so my TB hard drives are filling up ridiculously fast. I need to drop some load off both drives and reboot. Hope this will resolve the issue as I really don't think it's a canon-LR problem (I'm using the most updated 5.6 version). Again, thanks for your input. I'll keep you posted.

  • Problems importing raw files into Lightroom 3.4

    I've just dowloaded lightroom 3.4 and now I'm having problems importing raw files into lightroom.  I havent had a problem before.  Can anyone help me?  My camera is a Nikon D7000.

    Perhaps a few more details are required. Take a look at the FAQ "How to get help quickly"

  • I can not load RAW files from my nikon d810

    I Have a problem Reading RAW files from my nikon d810

    Thanks,
    Joop
    Op 26 jul. 2014 om 17:40 heeft Rikk Flohr <[email protected]> het volgende geschreven:
    I can not load RAW files from my nikon d810
    created by Rikk Flohr in Photoshop Lightroom - View the full discussion
    https://forums.adobe.com/search.jspa?q=D810
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6585986#6585986
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How can I import RW2 files into Lightroom 4?Also why can`t I see jpgs related to the same RW2 files?

    I tried ti import my RW2 camera (Lumix) raw files into Lightroom 4.4 and simply couldn`t do it. Also I had jpgs in the same folder and Lightroom didn`t bring them in at all.
    What can I do? Is there any ways or settings? Does Lightroom 5 see RW2?
    Thanks

    What Jim said.
    Either:
    Upgrade to Lightroom 5 then open the RW2 files in LR5, or
    Download the free Adobe DNG converter, convert all RW2 files to DNGs then edit the DNGs in Lightroom 4
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • I can't see .NEF files in finder from mi NIkon D7100. Helllp !!!!!

    I can't see .NEF files in finder from mi NIkon D7100. Helllp !!!!!
    I can open NEF files in Camera Raw but Im not seeing tumbs in finder !
    Also I cant see them in preview too.

    Well, I don't know what the problem actually is in the first place, it should work as is, I think something is messed up with the present driver and replacing it would perhaps get around that problem.
    It seems like I'd be adding one more layer of complexity to the Vista machine...
    Not sure how the Vista machine is involved in this, since these are drivers for the Mac.
    Though to involve the Vista Machine, One option not mentioned yet is MacDrive for you PCs... allows them to Read/Write HFS+...
    http://www.mediafour.com/products/macdrive/

  • Problems downloading RAW files into Lightroom 4 from a 70D camera.

    I had a canon rebel xsi and had been able to download my RAW files to lightroom 4.  However, I have recently bought a 70D and is won't download into Lightroom 4.  I have been told that Lightroom 4 doesn't support the 70D and I have to upgrade to Lightroom 5.  Is this correct, or can I get some kind of plug in?  Also if Lightroom 5 how much would it be for me to upgrade, is an "upgrade" cheaper to someone who has already got Lightroom 4.

    Once you buy LR 5 you can install any of the LR 5.x versions where LR 5.7 just came out and supports the newest cameras, like the Nikon D750 or Canon 7D Mark II along with all earlier models.
    It would be wise to download and install the LR 5.7 as a trial and make sure it works for you before buying the upgrade.  The minimum OS is 10.7 and Win 7, I think, so if you’re on XP or Vista or OS X 10.6 then you’re out of luck.
    The various version of LR are available on the Adobe Updates site:  http://www.adobe.com/downloads/updates/
    They will run in trial mode for 30 days or until you enter appropriate serial numbers.

  • I have a new camera and cannot import RAW files into lightroom.

    I have a new Sony NEX 5 and have tried importing the ARW files into lightroom. The files are recognized when I import photos from device. When I choose the .arw files to import, I receive an message "unknown errors occurred" and files won't import. I have never had a problem importing files from a card or directly from my older camera. Any suggestions?

    Check here to see if your camera is supported yet.
    If its a camera launched in the last month it won't be. But you can try LR 3.2 RC and see if it has been added. Otherwise you will have to wait until LR supports the format. This is a problem caused by manufacturers constantly using their own formats which require Adobe to investigate every new format before adding it to LR. In 99.99% of the cases the so called new format from the manufacturers is just a line of code with the name of the camera in it. You can use a EXIF editor tool (just google, lots of free ones) to change the name in the RAW file to one presently supported and then convert to DNG. If you do go down this road then ensure you also keep a copy of the original files just in case something has actually changed.
    If you are still using LR 2.7 and the format you need was introduced with LR 3 you don't need to upgrade, you can just use Adobes standalone converter to convert the files to DNG and then import them.

  • I can't load raw files from a Leica d-lux 6. Says it's an unsupported file. Help please!

    I cannot load raw files from a Leica d-lux 6.  Aperture says it's an unsupported file.  How do I get it to be a supported file?  Help, please!

    What is your Aperture version? Here is the list of supported raw formats for Aperture 3, see: Apple - Aperture - Technical Specifications - RAW Support
    Your camera is not on the list. Use the software that came with your camera to convert your raw files to dng or tiff images; then you can import the images into Aperture and work with them, while waiting for Apple to release raw support for your camera. Or shoot raw+jpeg pairs and use the jpeg while you are waiting.
    Is Mac OS X (10.5.1) really your current operating system? Then you may need to upgrade, when Apple finally releases raw support for your camera. The newest raw support required Aperture 3.4. to be installed.
    Regards
    Léonie

  • Can't load m4v files into Photoshop

    I created a H264 Blu-ray (m4v) using Adobe Premiere Pro CS4. It was a exported as 1080i file. I tried to load this file into Photoshop CS4 extended. Photoshop says that it "could not complete your request because the movie file could not be opened". Can anyone help as it is important to me to apply some Photoshop to fix overexposure which it does superbly to a Quick Time (720*480) file. I want to do the same for 1080i file.
    Thx
    Sundar

    I initially captured the clip as .MTS in 1080. Using premiere CS4, I exported part of the clip as H264 Blu-Ray (m4v). If I try QT as output format, it is of lower resolution. You are right that Photoshop does not have problem in pulling in QT clips.
    You answered your own question. H.264 BluRay is a multiplexed sub-format of H.264 which is not compatible with QT's implementation of H.264. If you want to use H.264, you must export normal H.264 and the profile level must be set to 3.1, basic in the exporter. Then, after export, you simply rename the file to *.mov. That aside, you can always use alternate Quicktime CoDecs like PNG or PhotoJPEG and directly export to a MOV. Your loss in quality is due to incorrect field settings, so that needs to be set properly. It merely doesn't affect your H.264 output, because there everything is set correctly already in the presets.
    Mylenium

  • How can insert a MSWORD file into jdevloper form?

    Dear forums
    i am a user of jdevloper
    and working on client\swing.
    i want to insert a microsoft file into my form
    but i have no idea abt it.
    so plz help me....
    thanks

    You might want to read a little bit about Jakarta's POI and see if it can help you.
    http://jakarta.apache.org/poi/

  • Cannot import sony arw raw files into lightroom 5

    How can I import sony arw raw files to lightroom 5.  On Import I cannot convert them to dng.

    What camera?
    What version of Lightroom?
    What is the exact complete word-for-word verbatim error message?
    What exactly do you see on your screen anyway when this is happening? Describe in detail.

Maybe you are looking for

  • Error in rules while updating from PSA to ODS

    Hi Experts, I am trying to load data from PSA to ODS using DTP. For about 101 records I get the following error: "Runtime error while executing rule -> see long text     RSTRAN     301" On further looking at the long text: Diagnosis     An error occu

  • If i press the Find button didn't get the all fields

    Hi........... If i press the find button only two fields get the values remaining fields didn't get the values :CONTROL_1.ASSET_NUMBER := i.asset_serial_numebr; :CONTROL_1.INSTANCE_NUMBER := i.serial_number; ---------------only this two fields are in

  • ACS authorization plugins + configuration

    Hi, there have been rumors that there is a plugin providing an API that allows you to authenticate user with a given name/password combination. I.e. the users do not necessarily need an Adobe account. The rumor also says that this is somewhat related

  • How to execute OS command on client's machine

    Hi, How to invoke for example MsWord on client's machine from APEX? I'm trying to use MSWord mail merge. Andrija

  • Transction Could not be created

    I have done required settings for Webclient,and able to see all functionalities from WEB client 5.0,But after account identification there is an error prompting like "Transction Could not be created".please help me how to solve this problem. Regards