Can't load theme made from themebuilder

I made a theme using the ThemeBuilder, and it says its not compatible with my device....but it is. The settings for the theme are set for the 8100 which is my phone. How come I can't load it in?

PLEASE NOTE: I looked this up in Google. I just noticed that I replied to my own post. SORRY!
I don't know if this is coincidence but I am having the same issues. The recovery discs did not work properly. I got may blue screen instances. Vista did seem to load but it was incomplete and unstable with a vide variety of blue screen instances over many attempts and attempted use. I got a Vista 'Anytime Upgrade' disc which seems to have a clean copy of Vista 32 bit on it. This did load Vista uneventfully using my Vista key from the side of the computer. The code was accepted and I thought that I was in the clear and then the blue screen cavalcade began anew. Figuring that the problem was with Vista on my media, I bought a new, retail full version of Windows 7 Professional. Neither the 64 bit or 32 bit version will load properly nor can I get as far as I did with Vista. The failure occurs in the 'Expanding Windows Files' section of the program load.
My current issues are 'The system encountered an unrecoverable hardware error.' and I get the hardware failure code of '0x00000124'. I also get the note 'BOOTMGR is missing.' at start up if I don't attempt to install Windows 7 right away. I have used the command prompt to (seemingly) successfully install the BOOTMGR but it is missing again right away.
Prior to the slow failure of my original 320 GB HP supplied drive, the computer had no other problems. The new drive passes a SMART full surface test and the memory passes as well.
Any ideas??
Thanks in any event!
Jon Hall
Ruckersville, VA. (USA)

Similar Messages

I can't load some content from my external hard drive to itunes,

I can't load some content from 1 of my external hard drive to itunes, it can see it and try to load the folder / files but it doesn't appear, these files worked recently as some of them are currently on my ipod touch - I had to factory restore my laptop this week (virus) so have been trying to put everything back on to sync ipod - any ideas???

To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao.

The windows of the Windows bar are already a form of tabs, so I don't need them in Firefox. How can I disable them completely from Firefox 23?

RE: TABS ARE WINDOWS!
The Windows bar already functions as a tab bar. Those tabs are called "windows." So, I find Firefox tab windows superfluous. How can I disable them completely from Firefox 23? I don't need what is essentially TWO windows bars covering up the entire width of my widescreen monitor's image! I already have a Windows bar at the bottom of my screen and, if I really wanted to, I could change ITS position to the top of the screen, so that it would LOOK like the Firefox tab windows bar. Firefox TABS are, essentially, a superfluous SECOND WINDOWS BAR.
Here are my reasons for why I'd rather use Mozilla's Firefox, than Microsoft's Internet Explorer or Google's Chrome. I love and admire Firefox for Mozilla's intent on good security, for Firefox's Personas add-on, and for Firefox's free use of the Ad-Block add-on which, as you know, has the distinct virtue of reducing screen clutter--the last of which is my motive for wanting to get rid of the SUPERFLUOUS Firefox tabs "windows" bar. I am dreadfully sick of companies forcing miscellaneous bars (mostly representing marketing campaigns trying to sell me something) into my browser (and down my throat) every time I download something. (In case you haven't guessed, I am deliberately referring to your Firefox tabs bar as a "Firefox tabs 'windows' bar," because TABS are WINDOWS!)

Let me clarify even more. The Firefox add-on you mention does not remove "tabs" windows. It only HIDES the "tabs" bar when there is only one "tab" in that window. It DOES NOT end "tabs." It does not turn "tabs" off.
I know this, because, even with the add-on you recommend, the "tabs" bar often re-appears when I open a link, which--for some unknown reason--Firefox defaults to opening in a second "tab" within the same window, rather than putting it in a new Windows bar window. This, of course, disregards what I want to happen.
I want to use my Windows bar to control my windows. I do not want my Firefox browser controlling my windows--which it calls "tabs." Can you tell me how to shut off "tabs?"

How can i load a VI from LABVIEW ver 6.0.1b3 to LABVIEW ver 6.1

How can i load a VI from LABVIEW ver 6.0.1b3 to LABVIEW ver 6.1......I want to load a vi but i'm getting this error:
LabVIEW load error code 9:VI version (6.1) is newer than LabVIEW version (6.0.1b3)
My LabVIEW ver is 6.1
Please help ......it's important
Thanks

I am having similar issues with a *.exe from LV6.1. I have the runtime engine for 6.1 and recently upgraded to 8.2 from 7.1. I've never had 6.1 on my machine. I am able to install this executible and runtime engine on a machine with 7.1 and can run the *.exe fine.
I get a load error and am not sure why. I have had similar issues with old VI's that I have written in 7.1 executing on this machine w/ 8.2
any suggestions.
Attachments:
error.zip ‏14 KB

Can I load the information from my iCloud account that was backed up earlier this year to a new device since my iPad was stolen?

Can I load the information from my iCloud account that was backed up earlier this year to a new device since my iPad was stolen?

Yes you can. iCloud: Restore or set up your iOS device from iCloud

HT4101 Can I load photo's from my IPad back onto my SD card through the Camera Connection Kit?

Can I load photo's from my IPad back onto my SD card through the Camera Connection Kit?

No, it only supports the copying of photos and videos to the Photos app on the iPad, not from the iPad. You can copy photos that you've copied to the iPad via the kit to your computer : http://support.apple.com/kb/HT4083

I can not load RAW files from my nikon d810

I Have a problem Reading RAW files from my nikon d810

Thanks,
Joop
Op 26 jul. 2014 om 17:40 heeft Rikk Flohr <[email protected]> het volgende geschreven:
I can not load RAW files from my nikon d810
created by Rikk Flohr in Photoshop Lightroom - View the full discussion
https://forums.adobe.com/search.jspa?q=D810
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6585986#6585986
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Can't load Network Settings from System Preferences

For some reason I can't load Network Settings from System Preferences anymore - it just stalls with the bar showing "Loading Network" and doing nothing. This is happening in conjunction with a new inability to connect to a network printer - it won't show up on the list of printers, even when I manually enter the IP address. Something is obviously mucked up - can anyone tell me what it might be & how I can fix it? Thanks!

I was able to fix this myself by using one of the techniques suggested here for a different problem. Basically I went into Library/Preferences/System Configuration and deleted networkinterfaces.plist, preferences.plist & com.apple.nat.plist. All were rebuilt when I restarted and went to System Preferences/Network and I was able to load the Network Settings. This didn't fix the problem with my printer, but at least it got the settings up.

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Whit the new iTunes how i can down load my pictures from the iPhone to the computer to make more spaces

whit the new iTunes how i can down load my pictures from the iPhone to the computer to make more spaces

Hi shadibader,
I understand that you wish to import your photos onto your computer from your iOS device. Here is an article for you that will explain how to accomplish this:
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
http://support.apple.com/en-us/HT201302
Thanks for using the Apple Support Communities!
Cheers,
Braden

Can I load xml file from SWC without using @embed

I'm developing a mobile application in which I need to load xml files from File.applicationDirectory. This works great if the xml files are part of the main application swf. But I would like to move these xml files into a SWC so they could be shared across multiple applications.
Using FlashBuilder 4.5, when a SWC is built, I can specify files to embed in the library that are not assets (Assets Tab of Flex Library Build Path). For various design reasons, I do NOT want to embed the xml files via @embed.
When the swc is built and I open it up using a zip utility, I see the xml files in there just fine. So they are being bundled with the SWC. But how can I load these files in my main application that does not involve using @embed? When the main application is built, the swc setting for link type is "merged into code".
I wouldn't expect the application to automatically pull out the xml files from the swc and place them in the File.applicationDirectory on the mobile device. I've tried loading from there just in case but file.exists is false (as expected).
I've searched the web (and continue to do so) and all the answers seem to be to use @embed. Is there another way?
Randy

It's actually a lot easier than you think.
Just reference the file like any'ol URL using a path relative to the SWC's src directory.
So if you include the file "assets/xml/some.xml", just use that same string like you would any remote resource.
For example:
var loader:URLLoader = new URLLoader( new URLRequest("assets/xml/some.xml"));
I believe it would also work like this "/assets/xml/some.xml", but I prefer relative paths so the link doesnt break if moved out of the SWC...

I can't load raw files from a Leica d-lux 6. Says it's an unsupported file. Help please!

I cannot load raw files from a Leica d-lux 6. Aperture says it's an unsupported file. How do I get it to be a supported file? Help, please!

What is your Aperture version? Here is the list of supported raw formats for Aperture 3, see: Apple - Aperture - Technical Specifications - RAW Support
Your camera is not on the list. Use the software that came with your camera to convert your raw files to dng or tiff images; then you can import the images into Aperture and work with them, while waiting for Apple to release raw support for your camera. Or shoot raw+jpeg pairs and use the jpeg while you are waiting.
Is Mac OS X (10.5.1) really your current operating system? Then you may need to upgrade, when Apple finally releases raw support for your camera. The newest raw support required Aperture 3.4. to be installed.
Regards
Léonie

If I purchase movies on 1 iPad2, can I load them onto my 2nd iPad2?

I have two iPad2s, 1 for work and 1 personal, I use separate Apple IDs on them, but if I buy a movie on one of them, can I load it on the other.

If you sync the two iPads to the same computer then you can put content from both ids on both iPads - films can only be downloaded from Aplle once so you can't re-download the film on a second computer, though you can copy it manually between two computers, and if that account is authorised on the other computer you can then add it to its iTune and sync it .

HT1766 If I have accidently deleted my music files from iTunes on my PC laptop, can I get them back from my iPad which was synced just before I deleted all the files?

I accidently deletes all my music files from iTunes on my PC laptop. Can I get them back using my iPad mini Retina that was synced just before I deleted the files? I am a bit old fashioned, so all of my music has been imported from my CD,s, not purchased from iTunes store. I could re-import, but almost 5,000 songs. Especially when they are sitting there on the iPad.

Yes, if they were purchased from iTunes. If they were CD's you copied to your iTunes library, then synced to your iPad, you may be forced to redownload the CDs again.
Connect your iPad to your computer via USB and with iTunes open wait for your iPad to recognized on the left side of the iTunes screen. Right click your iPad once and a dialog box will apear. Choose Transfer Purchases and the music apps, etc., you purchased will transfer to your iTunes library on your computer.

Can't load thumbnail photo from file 'BBThumbs.dat'

Hi everybody,
I'm developing an application on BB to take and view photo. My problem is can't load the thumbnail photos from file 'BBThumbs.dat'. I'm using code as below:
public byte[] getThumb(String fileName) {
String DB = fileName.substring(0, fileName.lastIndexOf('/'))
+ "/BBThumbs.dat";
fileName = fileName.substring(fileName.lastIndexOf('/') + 1, fileName
.length());
if (thumbsMap == null) {
thumbsMap = new Hashtable();
byte b[] = null;
FileConnection fc = null;
InputStream in = null;
try {
fc = (FileConnection) Connector.open(DB, Connector.READ);
if (!fc.exists()) {
return null;
byte[] temp=new byte[(int)fc.fileSize()];
in = fc.openInputStream();
DataInputStream is=new DataInputStream(in);
// b = getThumbNail(first, thumbsMap, fileName, in);
is.readFully(temp);
b=readThumbs(temp, fileName);
} catch (Exception e) {
} finally {
if (fc != null) {
try {
fc.close();
} catch (Exception e) {
if (in != null) {
try {
in.close();
} catch (Exception e) {
return b;
please give my any idea or suggestions. Thanks

Try:
!Section=Dimensions
'Name;DimensionClass;DimensionAlias;CustomDimensionID
SKU;Generic;;
!Members=SKU
'Name;DataType
Brand1;Unspecified
Brand2;Unspecified
!Hierarchies=SKU
'Parent;Child;DataStorage
#root;Brand1;StoreData
#root;Brand2;StoreData
Tho I would add MemberValidForPlan#;Plan#Aggregation, where # is a number of your application which this member is valid for or even has a specific aggregation, as well
example:
!Hierarchies=SKU
'Parent;Child;DataStorage;MemberValidForPlan1;MemberValidForPlan2;MemberValidForPlan3;Plan1Aggregation;Plan2Aggregation;Plan3Aggregation;UDA
#root;Brand1;StoreData;Y;Y;Y;+;+;+;
#root;Brand2;StoreData;Y;Y;Y;+;+;+;
Even more as an idea use pipes, maybe.
But you will need to say something about Aliases as well if this is a planning application.

Can't load theme made from themebuild​er

Similar Messages

Maybe you are looking for

Can't load theme made from themebuilder