Can't locate 'find menu' on screen elements 9

where on the screen is the find menu? i can't find it elements 9

See this for how to change the dpi on windows:
http://helpx.adobe.com/photoshop-elements/kb/menus-missing-elements-8-9.html

Similar Messages

How to use 'Find' menu in Screens

Hi all,
I wanted to know how to use 'Find' menu in screens.
Actually I have created a screen through SE51 and used the pushbutton to assign the function 'Find' ( one with binoculars ). The screen uses a table control to bring all the data from the DB table in the PBO module. When the user uses FIND button the system should prompt a search pop up screen onto which he will enter the search parameter and when he enter that the corresponding line item should be displayed on the tablecontrol. I wanted to know what logic should be incorporated in the program if that pushbutton is used. Please reply immediately. Its urgent.
Regards,
Bhavani.
Edited by: BHAVANI MADIREDDY on Apr 1, 2008 12:31 PM

Hello,
In the PAI under a module (user_command for example) when the user click the button you should use the command READ TABLE (if you look at the help, there's some options to do the READ dynamically - [http://help.sap.com/saphelp_nw04/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm]) to get the line index and with it you set the TOP_LINE of the table control ( tc_table-top_line = sy-index for example).
Doing this the selected line will be the first in the table control on the next step (PAI/PBO).
Regards,

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?
If so how do I accomplish this act?
Are their additional menus available for Encore CS4?

The Menus in PrE are in Menu Sets. Each set is a Main Menu and a Scene Selection Menu. As PrE does the authoring semi-automatically, there are many "extras" in those PSD's, in the Button Layer Sets. All you have to do is make a Copy of your two Menus into a separate folder, so that you do not worry about messing up your Menu Sets in PrE. I'd do this in a new sub-folder in the Encore Library folder hierarchy. Then, Open each of these two Menus in PS. Go in and clean out all of the other languages for the Text and Button Text. Match the Layer Set/Button Layer Set names to those naming conventions in the Encore Library Menus, as you will not be getting any semi-automation. Where you do not need, say a Next Button, just eliminate that Button's Layer Set. Remember, PrE will do this semi-automatically, plus will give you the number of Scene Selection Menus, that your Project calls for - Encore will not. You must count the Scenes, divide by the number of Buttons on that Scene Selection Menu, and do Copies of that Menu, to accommodate what you require.
As for Encore, it comes with a full compliment of Menus, Buttons, and other Assets, like EM files (Templates), with Motion and Audio Assets. All can be completely customized in PS. Note: in PSElements, I do not believe that you can create Layer Sets, so that will be a limitation. The full PS has no limitations, with the single exception that to change Button Sub-picture Highlight colors, this must be done in Encore's Menu Editor, unless it's been added to PS CS5.
Good luck,
Hunt
PS - remember, work on Copies of the two Menus in the PrE Menu Set, and NOT on the originals, or you will be doing a Repair Install to get those back.

How can I make the menu text in Elements 11 larger?

I am having trouble reading the menu text in Elements 11 that I juat purchased. I have found that with many programs there is a way to enlarge the menu text, but so far I have not been able to find a way to make the menu text large enough for me to read unless I am about 1' away from the screen which I am sure you can imagine is not reasonable or acceptible.

Sorry to say but enlarging menu text is not possible in photoshop elements. You can try adjusting resolution to a lower value so that the menu text becomes a bit bigger.

Can't access Finder & menu bar flashes on & off at "boot-up"

After installing a screensaver yesterday from an Apple recommended site, the problem above occurred but also applications are quitting unexpectedly when I access menu items & try to delete items. Also Spotlight won't work - if I type stuff in Spotlight, the app I have open just quit. I can't access finder so can't even get to delete the ??offending screensaver.
Help!!
Cramster

Have you tried uninstalling the screen saver?
After that try repairing permissions.
Applications>Utilities>Disk Utility
Then select your drive from the left and click "Repair Disk Permissions"
If that does not help, call Apple Care 1800767APPLE.
Or take your MacBookPro to an Apple Store.
Good luck!

Can't see finder menu bar mountain lion

Since yesterday, every time I reboot or start my iMac everything comes up except my Finder menu bar.
Only way I can start working on my Mac is to relaunch my finder by force quitting.
I am running iMac 24" (Early 2008), Mountain Lion (10.8.2)
2.8 GHz Intel Core 2 Duo
4GB RAM
Anyone with similar experience? Thank you in advance.

One possibility is that you are somehow getting into full screen mode for some app that is restarting ever time you reboot. But the finder could be hosed for some other reason. Perhaps some menubar extension you installed?
I'd try two things.
1) start up in safe mode (hold down the shift key on hearing the startup chime) See http://support.apple.com/kb/HT1455. If all is well then, you should reboot normally after that.
2) login as a different user ( you do have another user setup I hope. This is always a good idea). Does the problem happen with this other user?
Safe mode should reset caches and will, I hope fix your problem.
Hope this helps.

Using PS Elements 11 on a Mac how can one replicate Finder folders in the Elements Organiser view?

Hi all - I have found the Organiser folder structure quite confusing and it does not seem to replicate the Finder folder structure other than randomly, unlike Bridge in PS for PC which I also use.
I would love to be able to create folders in elements or simply do so in Finder and find them show up in elements Organiser. It seems to me that only once I have saved an image to a folder in the Finder does it show up in the Organiser folder view. Is this correct?
Any suggestions around a sensible workflow or approach here would be most welcome, thanks. Sean

Many thanks Andaleeb - yes I have tried that and it seems only to add to the confusion - folders which in the Finder clearly show all my images are blank in PSE Organiser with the statement that they still have to be imported into PS Organiser. I guess that may be my fault because, due to the problems in locating files in Organiser I right clicked on them in the Finder and said 'open with PSE'. So in effect I bypassed PSE Organiser. But one would still have hoped that the folder hierarchy would be the same in Organiser and the Finder. Very confusing! I have never seen a program deal with folders etc in the way PSE does.
all the best
Sean

Can't locate/find jaxp1.1 in J2EE1.3 or jaxp1.3 in J2SE1.5

Hi All,
I am using an older textbook(2002) on XML and XSL capabilities in Java web applications and the example in the book said that JAXP1.1 contains 3 jar files which are crimson.jar,jaxp.jar and xalan.jar and the book also said that JAXP1.1 is part of J2EE1.3. and is needed for XML and XSL capabilities.
My problem is that I have J2EE1.3 on my hard disk and I can't still locate these jar files. Another problem is that the Sun's website said there is a new version of JAXP called JAXP1.3 and it is part of J2SE1.5. So, I downloaded the J2SE1.5 and still could not locate the said JAXP1.3. Is it me that did not look well for this JAXP file or did you guys encountered this problem? Please where can I get jaxp1.1 or jaxp1.3 as I can't see it in the J2EE or J2SE5.0 I downloaded?

I am using an older textbook(2002) on XML and XSL
capabilities in Java web applications and the example
in the book said that JAXP1.1 contains 3 jar files
which are crimson.jar,jaxp.jar and xalan.jar and the
book also said that JAXP1.1 is part of J2EE1.3. and
is needed for XML and XSL capabilities.Those classes are packed into j2ee.jar

I can't access/find the "lock" screen orientation funtion since downloading iOS 7

Since I downloaded iOS 7, I can't access the "lock" orientation key that used to be on the control centre. I've flagged on "use side switch to: Lock Rotation", but to be honest I have no idea what this means. How do I "lock" orientation of my screen with this new operating system?

Hi Anna,
With iOS7 on an iPhone, you lock the rotation by bringing up the control center and selecting the "Lock Rotation" icon. To bring up the control center, swipe up from the bottom of your screen. You should see a translucent display with the control center options:
http://www.apple.com/ios/design/
See the "You know a good design" part in the article above.
Cheers,
GB

Can not see finder

I connected my Mac Mini vis HDMI to my flat screen TV and I can not see the finder bar at the top of the screen. My mouse goes above the top of the viewing area, so I think it's up there. How can I adjust the resolution so that I can see the finder in the screen?

Try checking your TV's settings for a Pixel Ratio setting or an overscan mode, and see if that can be adjusted to put the Mini's output on a 1:1 level with the TV's capabilities. Does this problem only happen at the maximum Mac resolution, and not if you lower the output resolution?

Get screen elements dynamically

Hi
Can we get the screen elements like input box or check box
dynamically in dialog programming?
Thanks & Regards
GVRao

HI,
ya this is possible in dialog programing.. what you can do is that define the screen elements and set there property as invisible.
Then at runtime according to the requirement you can modify SCREEN structure to make that element visible again..
Hope this will be usefull.. Reward Points!!!!!!!!!!

I can't find the green screen key in the Effects menu in Adobe Premiere Elements 12

Is there anybody who can help me were I can find the green screen key in premiere element 12. According tutorial video's on You Tube there must be a green screen key in the effects menu under keying, but with me it doesn't seem to be there.

jajajoja
Thanks for the reply. Glad you asked. Please check out my blog post on the use of the Difference Matte, especially for the Premiere Elements Mac users who run into this Windows Only situation.
ATR Premiere Elements Troubleshooting: PE11: Difference Matte As Substitute for Green or Blue Screen Key
We are not Adobe. Rather user to user. So, I am not sure why these keying features are not included in Premiere Elements Mac.
Please review and consider the above, and, if any questions, please do not hesitate to ask.
Best wishes.
ATR

Why I can't find the update menu in the Help menu for Photoshop Elements 10 on my Mac?

Why I can't find the update menu in the Help menu for Photoshop Elements 10 on my Mac?
I can't manually update the saw plug-in either. I am stuck!

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

Home folder do not appear in the finder menu - How can I get it back?

Keywords:
Mac OS X 10.4.11
FileVault: On
System: Restarted
Home folder: still somewhere in the hard drive but not yet in my account
Initial bad manipulation: home folder > get info > ownership & permissions > you can > No Access
<and> Owner > No Acces
Hello all,
Here is my problem:
Basically, I do not have the home folder in my account when I log in.
Hopefully I remember well what have led to this consequence.
To begin, in the finder menu for the home folder I opened the get info pop-up. Then, under "Ownership & Permissions" I have replaced "Read & Write" by "No Access" both in "you can" and under "Details - Owner".
Per consequence, I couldn't read a document in this folder. Hence, I've tried to to go backward and change the "No Access" to "Read & Write" but it couldn't work.
Then, I restarted the session - but because I had filevault turned on - it screwed.
Then, when I logged in back I got this message:
"The home folder for user "XX" is not located in the usual place or cannot be accessed.
The home or users folder may have been moved or deleted. If the home folder is located or the network, he server may be unavailable temporarily. If you continue to have problems, see your administrator."
Do anyone have already encountered a similar problem?
Thanks a lot,
/

HFG,
One more thing, from this other admin account (good one) I went in terminal and >I observed that the folder that I'm having trouble with does not have the "d" letter.
Basically, it's written:
"-rwxr-xr-x 1 bobip bouba 23701154564 Nov 12 15:31 lol.sparseimage"
What you think? Souldn't be coded as "d_rwx...
Remember what I wrote earlier:
A FileVault account instead puts all of its data into an encrypted disk image - in fact an encrypted sparseimage. If FileVault is enabled, the home folder for that account no longer directly contains the Documents, Pictures, and other data subfolders - all that the home folder really contains is a single file named username.sparseimage. When you log in to the FileVault account and give your password, this disk image mounts and you can access your files.
That "lol.sparseimage" does contain all your data, but it is a file and not a folder, which is why its permissions start with a "-" and not a "d". It is a "disk image file," very similar to the .dmg files that you download from the internet. When a disk image file is opened it will mount a "virtual" disk volume, which behaves very much like a real external disk volume.
Let's call the shortname of your FileVault account "fv" as Robert did. So as I wrote earlier, when you are logged out, your file structure is going to look like:
HD>Users>fv>fv.sparseimage
When you log in, the name of the lol folder is changed to .fv, with the lol.sparseimage file still inside. The leading period hides it from finder. But more importantly, a "virtual disk" named "fv" mounts and opens, which contains all your stuff. The "fv" disk icon is hidden from Finder and doesn't show on the desktop, but it is there.
The mounted disk volume "fv" has access permissions just as a file or folder does, and looking back at what you did, *I think you changed the permissions on that mounted volume*, and not on the sparseimage file that holds it - you would not have seen the sparseimage file from Finder. If you did this then the permissions for both the HD>Users>fv folder and also for the sparseimage file were probably OK all along. I'm not sure what you've now done to them, which is why I advised backing up before doing anything.
So to sum up - there are three different entities that need to have the proper permission structure for the FileVault account to work properly:
1. The folder "fv" in /Users (assuming you are logged out. If logged in it would be .fv)
2. The *sparseimage file* "fv.sparseimage", which is inside that fv folder.
3. The *disk volume* 'fv" that mounts when the fv sparseimage file is opened and the correct FileVault password is given.
I tried creating a test filevault account to check these permissions, and you could try to reproduce what I found. My suggestion in trying to fix things is to do it from Finder, not from Terminal.
I would
1) Log out of the FileVault account,
2) From the other admin account, [enable the root user (Tiger)|http://support.apple.com/kb/HT1528?viewlocale=en_US], and then log in as root.
Then from the root account:
1) Do a Get Info on the folder /Users> fv. Set the owner to fv, with Read only access, set Group to fv with "No Acess" and set Others to "No Access.' Do not click Apply to enclosed items.
2) Do a Get Info on the file fv.sparseimage. Set the owner to fv, with Read and Write access, set Group to fv with No Access, and set Others to "No Access.' Do not click Apply to enclosed items.
3. Double-click the fv.sparseimage file (and cross your fingers!). When asked for a password, give the password from the FileVault account, not your current root password. Look on the Desktop for a new "fv" disk icon.
(Your stuff is in there - if you have ANY type of backup storage, even a thumb drive, you could double-click the fv disk icon and copy the most valuable files somewhere else)
Do a Get Info on the fv disk icon, and set the owner to "unknown" with Read and Write Access, the Group to "unknown" with No Access, and Others to No Access. Most importantly, *check the box for "Ignore ownership on this volume"*. Do not click Apply to enclosed items.
So again, the three Get Infos (as seen from the root account) on my fv folder, my fv.sparseimage file, and my fv mounted volumes look like this:
!http://i34.tinypic.com/krf4h.jpg!
The important permissions are those under "Details". Ignore the part that says "*You have*: No Access." ( You are root, and you actually do have access)
If all seems well, then right-click >eject the mounted fv disk icon on the desktop, log out of root, and try logging back into your Filevault account.

My Finder menu bar and screen is flashing. Is this a virus?

The icons (file folders, Hard Drive icon, etc) on my desktop and the Finder menu bar started flashing off and on, last night. I can use Mail, Safari, iPhoto, iTunes, etc. from the Dock, but it is a challenge to click on Airport on the menu bar to get on line. I shut the computer down, removed-then reinstalled the battery and restarted the computer, but the flashing began right away, again. I had exported some photos to desktop which landed atop the Hard Drive icon. I move them as quickly as I can, but the screen flashes and puts them back, so I can't access the Hard Drive. I had viewed a QT movie someone sent me earlier in the evening and also clicked on several photos in MySpace. I wonder if one of those could have done it.

Just starting up with the install disk won't erase anything.
Shut down the computer.
Restart the computer and at the same time insert disk1 into the slot while holding down the option key.
This should bring up a screen showing two different startup options.
Pick your disk that you inserted.
You will eventually get a screen with a window opened showing the Mac install file. Don't use this.
Up top on the menu bar should be a pull down menu that will give you an option of disk utilities.
Use the repair permissions function and disk repair function. These will not erase anything.
The reason I'm not clear on the position of the menus is that I'm at work on a peecee.
Try this and let us know..

Can't locate 'find menu' on screen elements 9

Similar Messages

Maybe you are looking for