Can't log in IR and ID; ABAP-Stack works

Hi everybody,
I try to log into IR or ID.
I get a message "autorisation error. Unkonw USer or Password".
If I try to log in via SAPGUI into ABAP Stack, it work OK.
Any ideas?
regards Mario

Hi,
I had the same problem couple of months ago. For this u have to do few things on the network side and on your system.
1. Goto Run>drivers>etc-->host(open it in notepad or wordpad).
Add your host name eg: 10.210.130.160 xiserver
2. Some port has to be opened to access server if you are in different network. Ask your basis people about the port numbers(mostly it ends with the system no.).
3. Check, your system and server are having connectivity between them
4. Check the java webstart version or try to download the jars again.
Thanks,
Arivarasu
Edited by: Arivarasu S on Aug 5, 2009 9:06 PM

Similar Messages

How can I remove Firefox successfully and allow hyperlinks to work?

I need to clear space on my PC and wish to remove Firefox. I tried this but then could not open any hyperlinks from e-mails in Outlook. I tried various options suggested on the Outlook help page but to no avail. How can I remove Firefox successfully and allow hyperlinks to work?

Have you tried resetting your Default Browser back to IE, thru the Control Panel > Add / Remove Programs?

My phone is being a real pain! Time doesn't work, can't sign into iMessage and only some apps work! It also kicks me off the wifi! This is not my connections problem, it happens everywhere! Apple is terrible! Phone also freezes a lot!

My phone is being a real pain! Time doesn't work, can't sign into iMessage and only some apps work! It also kicks me off the wifi! This is not my connections problem, it happens everywhere! Apple is terrible! Phone also freezes! What should I do!?

Did you try the basics from the manual?
Restart, reset, restore

XISUPER can't log into IB and ID but log into SLD ok

XI 3.0 SR1 is up and running, I can log into RWB and SLD with user XISUPER and password, however when I attempt to log in with XISUPER and password after the webstart kickoff it says "Authorization error username or password incorrect"...however i have proven that it is correct because I can log into SLD and RWB with said user...
Has anyone seen this before?
Thanks
John Ryan

Hi John,
pls check the XIsuper has same pswd in SU01(abap stack)
and exchangeProfile(java stack) for IR and ID services. It you have changed the pswd at any said places you will face this kind of problem. First set the pswd in su01 and than in exchangeProfile.
have a great time
Satish

No cursor when waking, can see log on screen and wallpaper (non retina)

Hi everyone
Just made the jump from Windows to Mac and am loving it! However, occasionally when waking my MBP's screen will show the password box and the wallpaper, but no cursor. It's super frustrating as I can't log on.
It doesn't happen every time and leaves me head scratching!
Any ideas ?

Start up your Mac in Safe Mode
A Safe Mode boot can take longer then a normal boot so be patient.
Once you are in Safe Mode, click the Apple menu icon top left in your screen.
From the drop down menu click Restart.
Safe Mode removes caches that may help.

Can't log into PowerShell and EAC on Exchange 2013 Server

I'm not sure why but I my Exchange PowerShell can't log into my Exchange server and I can't access the EAC
via localhost or the URL.
I did notice that I enabled HTTP Proxy in IIS and that I used Application Route Requesting with it but I went ahead
and reversed all those changes. I also noticed that the physical path for each sub-site in Default Web Site goes to the HTTP Proxy version of that folder instead of the ClientAccess one. I changed each folder to the clientaccess one but that didn't help. I
did some research on this and I saw that I had to enable the kerbauth in the modules area and I did that to. I restarted IIS and WebRM and that still didn't help.
The Exchange Management Shell error:
New-PSSession : [exchangeserver.domain.net] Connecting to remote server exchangeserver.domain.net failed with the
following
error message : The client cannot connect to the destination specified in the request. Verify that the service
on the
destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more
information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
On the web when I try to access EAC on our URL and not localhost, I get this error:
400
Bad Request :(
The request sent by your browser was not valid
On localhost, I just get a page cannot be found.

Hello
tip:
Check Get-owavirtualdirectory | fl and Get-ECPVirtualDirectory | fl and make sure that you using “Form based Authentication” and “Basic Authentication”
and check Control Panel\All Control Panel Items\Credential Manager for saved password.
and http://goo.gl/IC5P4S
sorry my english

Can't log off/restart, and other related issues.

I wrote the following with a lot of detail, intending to give it straight to Apple... but I don't think they have an option for that. Let me know if I'm wrong. Also, excuse my numbering scheme - it was trimming out my spaces and I wanted to preserve the layout somehow. =[
This all starts with my MacBook having been on for is that, when I open my MacBook and it comes back from sleep, I see the usual black screen. It brings up the unlock dialog, but that disappears almost instantly. Neither moving the cursor nor pressing keys brings it back. However, sleeping the laptop again and then reopening it shows the dialog normally. However, after then, I've noticed the following other symptoms after that point (until restart):
1) Gmail Notifier (in the menu bar) stops updating, even when "Check now" is clicked manually. Restarting the program doesn't fix this.
2) Screensaver doesn't come on automatically or with hot corner, only when "test" is pressed in the screensaver preference.
3) Not closing applications before logging out or shutting down produces an error (after a delay of a couple minutes) about the OS not being able to close the applications. However, they all appear to be closed (no white dot, right clicking on them doesn't show "Not Responding"). At that point, opening the programs and closing them manually seems to prevent the error message for that program. Then, ... (see next item)
4) Even if all applications are closed manually beforehand, it doesn't shut down or log off. A few observations:
a) Everything but the dock goes disappears.
b) Dashboard/expose/desktop hot keys and keyboard shortcuts still work.
c) Clicking a dock item brings the menu bar back, but doesn't reactivate Finder (or show the desktop icons, consequently).

I'm having this exact same problem, except I don't use GMail Notifier. The being unable to log out, shut down, or restart issue I've had intermittently in the past; the broken screensaver is new.

Can't log onto FaceTime and iMessage with mt iPad mini - any suggestions?

I can't sign into FaceTime and iMessage on my ipad mini! Brand new iPad mini so not sure what I'm doing wrong...

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

[KDE & HAL] I can't log with KDM & HAL daemon doesn't work.

Hi all,
I opened a new topic because I found anybody who has the same problem. First, I can't log myself with KDM, when I type my password and press enter, it displays me a black screen en goes back to logging session...So I read a comment which is advised to log in with GDM, it works but it's not KDM... I noticed that dbus didn't launch, I fixed that with wiki explanations, but HAL still like that:
:: Starting Hardware Abstraction Layer [FAIL]
I think it is a bug of 64bit package, but I am not sure. (32bit version works)
So Have you any ideas ? Thanks for reply.
PS: sorry for ugly english. It's not my native language.
I simply rebooted when it solved the problem...
Last edited by skanarchy (2009-02-12 15:23:20)

I am having the problem logging on through KDM as well, was that what was solved by simply rebooting? Someone else is mentioning the problem here: http://bbs.archlinux.org/viewtopic.php?pid=514615

Can someone please try this and see if this works for them...

Hi there
I cannot get the following to work but according to the mainstage manual this should work. Could someone please try this and see if this works:
a. Create a new concert based on any template. Delete all patches except one (lets call this remaining patch X).
b. Add a Bass instrument channel strip at the Concert level (by selecting the Concert in the patch list and then hitting the '+' button on the right within the Channel strips and selecting Software Instrument).
c. Set the Concert level Bass instrument channel strip to play only on the first 2 octaves or so, by setting the Key Range parameters appropriately.
d. Click on the remaining patch X. You should see that it automatically has your bass instrument as a split on the left hand octaves on the Mainstage keyboard displayed. So everything good so far.
d. Now save the concert with any name.
e. Close the concert.
f. Re-open the same concert again. Click on the patch X. At this point I would expect the Bass instrument to be showing on the lower octaves. This does not happen for me.
I've spent a couple of days trying to see if I'm doing something wrong, but cannot figure this out. Please please someone let me know the outcome of trying the above. And if I'm doing something wrong to get this to work, kindly let me know.
thanks
Ziggy

Thank you all for your suggestions and taking the time to try this out. I think I've sussed out what the problem is.
If you create them like Thor mentions that always seems to work. Thor, I don't understand what you mean by hitting the "+" in the channel strip area. Doing this creates an additional channel strip and not a new patch.
What I was trying to do before was to include all patches in a set as well. So I have my Concert, then a Set, then patches within my Set. If I added a Bass at the concert level, it looks like this was then propagated to all my patches in my set. But when I closed Mainstage and re-opened, the bass wasn't there at the Set or patch level.
I really think there is a bug with Mainstage, where if you have Sets and patches within sets, any instruments at Concert level do not get inherited by the Set, patches in the set. I've tried this a few times and tried without using Sets. It always seems to work without Sets.
So the lesson is not to use Sets, if you want to share concert level intruments.
Once again, thank you guys for trying this out.
Ziggy

Can't log into iMessages and it tells me to go and check my internet connection after checking it and turning it on and off it still doesn't work for iMessage but when I go into safari and other apps it works please help!

Cant log into iMessage on myI ipad air and get the message " please check your internet connection and try again" and my internet is on and I can connect to it in other applications.

1. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
2. Make sure phone number or email address is correct
3. Restart iPad
4. Reset iPad. Hold the Sleep and Home button down (together) until you see the Apple Logo

Dev Days Tutorials : Can't log into Apex and Can't connect to Ora server

Hello All,
I downloaded the pre-built Oracle VM from Developer Days. The setup works fine. I am now trying to follow hands on labs. There are a couple of things I am stuck at (at the very beginning).
1. The link to http://localhost:8080/apex does not work. Browser failes to connect. I suppose this is a required step continue labs.
2. In SQL Developer (I am familiar with this app), I can't create a connection. I tried using SYSDBA, SYSOPER as user names with oracle as password, but can't go anywhere. One of the items in lab is to unlock the account 'hr'. SQL Developer and sqlplus won't let me log in.
One of the things I noticed when the VM boots is a message saying Oracle Listener is not set up and (probably) won't be starting.
I would appreciate if anyone would help with items above. Thanks in Advance.
Ravi

I think the link is actually http://localhost:8888/apex well this one works for me anyway, using the Developer Day "Database App Development" downloadable VM

Can't log into iMessage and FaceTime

Hi there.
I seem to be having a similar problem to a lot of people here where I get an error from both of these applications telling me to check my network and try again.
I have spent countless hours trawling the support forums and even spent an hour on the phone to apple support and nothing is working!!
I have a 2008 macbook alauminium unibody. 2.4ghz intel core 2 duo and 4gb ram, 250gb harddrive. It should be working! My brother has the exact same macbook as me and his facetime and imessage works perfectly well. I also have an iphone and ipod touch and both of these applications work on those on my wifi network. My flatmate has an imac running leopard which I can sign into facetime with but not on my mac.
Apple support put it down to my wifi provider but that can't be the problem if I can facetime and imessage from my iphone and ipod and the imac in the flat can use facetime!!!! Somebody please help!
Apple have been totally useless which i am very dissapointed with and I just can't sus it out!!!
Thank you!

HI,
On the cost I would have no idea.
It is supposed to be part of the process in replacing any of the main boards such as Graphics card or main Logic board (Or Motherboard in some older towers).
If you were the one that had the work done then you should have receipts and proof of what the Serial Number is and what work was done.
If the Mac is a refurb then who ever did that refurb should have "replaced" the Serial Number.
Failing you having any of those details you would just have to ask a Store or Apple Authorised Service Provider.
7:59 PM Friday; December 7, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I can't log into iMessage and face time on my iPod touch.

I have tried to log in to it multiply times, but it never let's me log in. What can I do to fix this?

Try:
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting FaceTime
iOS: Troubleshooting Messages

While Logging Clips, "I" and "O" keys not working to mark clips

In FCP 5, I am logging clips
in Capture Window in order
to set up a Batch Capture
I am not able to mark the clips'
In and Out points using the
"I" and "O" keys
although I can by using the cursor
to click in the Logging Tab of
the Log and Capture Window
how do I use the Keys?
thanks

They might be working fine and you might not know it.
Mark i, play tape down mark o, hit log clip, give it a name and accept it and see what happens, if nada, write back.

Can't log in IR and ID; ABAP-Stack works

Similar Messages

Maybe you are looking for