Can't log in with newly created user on new install of Arch [solved]

Hi all,
Yesterday I installed Arch anew (because I had a hardware failure that took out my hard drive), but now I'm encountering an issue with logging in.
After following the installation guide, and creating a new user, I find that I'm unable to log in as said user.
It complains about wrong password, but it's the exact same password that I entered mere moments before that, when creating the new user.
I can "log in" as said user by first logging in as root (which does work) and doing "su - <username>" (though then it doesn't ask for a password).
Can someone point me in the right direction to fix this problem?
Last edited by madjo (2013-07-03 20:19:43)

I think cfr meant to say you shouldn't "fix" bash path - as some users did. Unfortunately there's a bit confusion wrt which paths should be used - see this ML thread.
Some say we should keep /bin/foo for compatibility, others say that we should boldly move to /usr/bin/foo.

Similar Messages

I can't log into a newly created Aim name for Ichat

It says you cant change account settings while youre logged in in the accounts tab area, but I am offline still and the log in box repeatedly pops up. It says my username or password is incorrect. But i just created it and know it is correct. iMessage logs in fine as well. I have search for hours, and tried many different solutions with no luck. very frustrated. thanks for any help

Make sure that you haven't saved Uppercase and Lowercase versions of that name and password.
Remove saved Password(s): Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"

Mb5b time_out with newly created user

Dear expert,
I have created new sap id and provided requested authorization however if we run mb5b it gets time_out even for one day but if we run it using any old SAP id it works fine.

take a performance trace in ST05 to see where the transaction spends all the time.
take an authorization trace in ST01 to see if the authorization affects the transaction.
make sure you execute with the very same selection parameters (except for the display variant, which may be user specific), the old user might have some defaults from user parameters which might not be available for the new user, compare the user parameters.
MB5B is in general slow and must not be used for mass data (see 1005901 - MB5B: Performance problems)

I set up a new user on my network today and am now in a location without access to that network. I just set her up as a user on her macbook but I can't log in with her credentials. Is that because I am not on the network and it is the initial setup?

I set up a new user on my network today and am now in a location without access to that network. I just set her up as a user on her macbook but I can't log in with her credentials. Is that because I am not on the network and it is the initial setup?

You need to set the option to create a mobile account using the Directory Utility app.

How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Which keyboard layout you were using? German, French ... I suppose your layout is reset to the default: US and you are unable to find the "?" or "/" ...
Please have a look into the keyboard viewer, to see how the layout of your keyboard is actually.
marek

Log on with a dialog user

Hi all Basis Gurus,
This is my question to Basis forum Please reply me immediately. while running ITS in CRM 50 i am getting mentioned below error (Logon on with a dialog user). can u please guide what are things i have to follow to resolve this prblem.
Please suggest me what shall i do.
Error when processing your request
What has happened?
The URL http://sapsrv.techmahindra.com:8010/sap/public/bc/its/mimes/system/SL/page/hourglass.html was not called due to an error.
Note
The following error text was processed in the system DEV : Log on with a dialog user
The error occurred on the application server sapsrv_DEV_10 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapsrv_DEV_10 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapsrv_DEV_10 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 000 -u: SAPSYS -l: E -s: DEV -i: sapsrv_DEV_10 -w: 0 -d: 20070223 -t: 144317 -v: ERROR_MESSAGE_STATE -e: Log on with a dialog user
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Regds,
Govinda ([email protected])

I have checked with that setting,but still it is showing the below error.is there any another way?
Error when processing your request
What has happened?
The URL http://gcecc62:8000/sap/bc/webdynpro/sap/zwda_logo_demo was not called due to an error.
Note
The following error text was processed in the system ECC : Die URL enthält keine vollständige Domainangabe (gcecc62 statt gcecc62.).
The error occurred on the application server gcecc62_ECC_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP

Connect content of archive link with newly created kpro document

Hi all,
i hope this the right plase to post my question. Unfortunatelly i did not find any SAP Records Management Topic.
The issue is:
i am able to create a new document in Records Management with the FM:
SRM_DOCUMENT_CREATE
But, what is not realy clear for me, how can i connect content of archive link with newly created kpro document.
Thanks and Best regards,
AT.

Hi Attila,
there is a difference between SRM_DOCUMENT_CREATE and ArchiveLink Documents.
If you use the SAP Standard Service Provider for Documents SRM_SP_DOCUMENT this
will refere to so called KPRO-Documents (KnowledgeProvider). This is totally different to
common ArchiveLink scenarios.
If you would like to use ArchiveLink Docs with attributes, there is the property unification in WebAS 6.40 available.
Best
Uwe Schulz

Logging on with the same user?

Hi all,
I know there is some rule that allows a user to log on more than once. A client of mine says they could always log in to the same company twice with the same username, but now they can't. They can only log on to 2 different companies with the same user name.
Was there a change made or am I missing something? I have tested on a single computer. I open 2 instances of SAP Business One 2007 and log in with the same user into the same company. THe first one logs on fine, the second one says "This user is already connected to this company". If I log on to a different company with that user it logs in.
I really thought you could log on with the same user to the same company.
The company has a distributed environment and people run around every now and again logging on at different computers (especially supervisors). This is a critical issue for them.
Please help
Thanks,
Adele

Adele,
I am not sure if you might have changed the default layout of SQL Management Studio, so you should
log on to Management Studio and go to Menu 'Window' -> 'Reset Window Layout'.
This will restore the default layout, which usually is the very same after a fresh SQL Server 2005 installation.
Now you should find on the left hand side the so called Object Explorer. In the Object Explorer Window you should see the SQL Server name, below of this should be
SQL Server name
+Databases
+Security
+Server Objects
+Replication
-Management
      +Mantenance Plans
      +SQL Server Logs
          Activity Monitor
+Notification
Maybe there are some more entries, depending on the options choosen during installation.
Kind regards
Mario Schoenberg
Senior Support Consultant
SAP Business One Forums Team

Authorization newly created user

hi experts,
can any body explain, what infotype/authorization will be required for newly created user of HCM.
Thanks,
Waqas
You should first go through the
[SAP Help|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/48/efa441d54eae5fe10000000a1550b0/frameset.htm]
& then seek help for specific issues. Please do not post vague questions.
Edited by: Suresh Datti on Aug 13, 2009 5:10 AM

Hi Waq,
Infotype access can be given based on client requirement. What ever infotype they will be using for their requirement you can add under role. Role can be created via Tcode PFCG. There are 2 objects named P_ORGIN & P_ORGXX can be used for giving infotype access under firld INFTY.
Then creaed role can be assigned to user via Tcode SU01.
If you want to give Tocde access, then authorization object P_Tocde & S_Tcode can be used.
Regards,
Purnima

I know my Game Center username and password, but I don't know the email (or maybe apple id) that is for my account. It is not my normal one. I can't log in with just my username, so does anyone know how I can get my email?

I know my Game Center username and password, but I don't know the email (or maybe apple id) that is for my account. It is not my normal one. I can't log in with just my username, so does anyone know how I can get my email?
Can you help me please

Dear
I have worked renovation of the device and have an account, but I forgot my email
I do not know E-mail has been linked in game center
I have a name defined in game center
Do I have the possibility of knowing E-mail has been linked in game center

I am from Bangladesh. I can't log in with my gmail Apple ID. When I put in the mail and password, and press sign in, it says it has to review on iTunes. Then I am directed to opening a new account. But why should I , since I have one. Plz help :(

I am from Bangladesh. I can't log in with my gmail Apple ID. When I put in the mail and password, and press sign in, it says it has to review on iTunes. Then I am directed to opening a new account. But why should I , since I have one. Plz help

Hi Ishrak,
I apologize, I'm a bit unclear on exactly what you are trying to log into with your Apple ID, or what exactly you are seeing (alert message, directions, etc) when you try to do so. If you continue to have issues with your Apple ID, you may find one or more of the articles linked from the following page helpful:
Apple ID - Apple Support
Regards,
- Brenden

I can't log in with my ID

I can't log in with my ID

The paucity of details is amazing. Which iMac, which OS? Log in where? Into the computer? Mac OS X uses usernames and passwords and not an ID.

Can log in with my Skype account can't log in with...

I can log in with a Skype account can't log in with a Microsoft account

weird. isn't there an option for signing in with a microsoft account? do you have a skype name and password? if that's the case, then it's mostly likey that the only way to get into skype is using your skype name and password.
it's the most likley explataion.

I have purchased a from within an app. I submit my password for the app, and then my Apple ID. I then get the following messages "Regrant failure _ please log in with the same user that has bought this app" and that is followed by "cant conn with IT _

I have purchased an item from within the app PocketBible on my iPad. However when I try to download it I am asked for my app User Name and Password and then my Apple ID and password. I give both of these. I then get a message which says Regrant failure - Please log in with the same user that has bought the app. That is then followed by Pocket Bible Alert - cannot connect to iTunes Store.
Anybody got any ideas, both what the 1st alert means and how I get round the problem please.

I had the same problem. My wife had the PocketBible on her Ipad 2 and she transferred ownership to me. I had to delete the app and reinstall it from the App store(logged in with my apple ID) and its working without a problem. I do not get those error messages when I attempt to Buy/Upgrade or Add/Remove books.

Can't log in with newly created user on new install of Arch [solved]

Similar Messages

Maybe you are looking for