Can't log into Ent.Man after 10g install on win xp pro.

I've been reading posts about this all day but still can't login.
I followed the instructions and installed a loopback adapter first.
10.10.10.10
255.255.255.0
Then I ran the install and that went fine.
The services are started, DBConsole service, listener service, oracle service, sqlplus service.
I followed the instructions and checked the local security policy for the "log on as a batch job" policy.
I can log into sqlplus with sysman/password that I created during the install.
Followed the instructions to make sure the accounts were unlocked with sqlplus.
Through internet explorer the login page comes up fine for
http://kir_64xp:1158/em
http://kir_64xp:5500/em - the second database I created with the database config assistant
http://10.10.10.10:5500/em
If I try to login with sys as normal, I get a message telling me to log in with sys as sysdba.
When I change to that it just refreshes and comes back to the login screen - no error.
If I try sysman as normal it just refreshes back to the login screen.
If I try sysman as sysdba then I get the error that I am using an incorrent username password.
If I use the administration assitant for windows I can connect to both of the databases with sysman or using OS authentications as sysdba.
I disabled my firewall software - that didn't help.
Any information would be appreciated,
Thanks.

I found this other post (Thread: New install 10G on XP professional) with the same problem.
Using Firefox instead of IE solved the problem.
I tried changing the security settings and pop up blocker settings but still could not get IE to work. If anyone knows what to change on IE to get it to work I'm curious. Other than wasting 3 hours of my life I'm good.
Thanks.

Similar Messages

Can't log into my icloud after IOS8 install. Cant use my phone.

Last night I finished updating the IOS8. I went through the prompts and it reboot installed, however when I went to the "set up" screen I choose English and it asked for my Apple password for the icloud. I have been entering that same password in and it wont take. I tried changing it and it still wont take. I can't use my phone at all because I can get passed the start up screen.

Hello kachinadoll73,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iCloud account issues:
iCloud: Account troubleshooting
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Win svr 2008 r2 ent - user can not log into remote desktop after installing march's 2015 important updates

we installed march's 2015 important updates onto all of our servers. three of our servers are not allowing RDP.
these servers have windows server 2008 r2 enterprise sp1 installed.
we enter in the username and password in the rdp dialog box and click on ok. the rdp dialog box comes back for us to enter in the username and password.
we do have kb3046049 and kb3002657 installed.
is there a v2 of kb 3002657 for windows server 2008 r2 enterprise?
on one of the servers
1. I disabled rdp
2. stop and start the following services
remote desktop configuration
remote desktop services
remote desktop services usermode port redirector
remote procedure call
3. enabled rdp
4. added the users allowed to rdp into server
This allowed us to RDP into that box with the username and password.
But the other two servers the steps performed above did not work.
Any solutions for Win Svr 2008 R2 enter sp1?

Thursday, March 19, 2015
This is a summary of the new and changed content scheduled for release on Thursday, March 19, 2015.
New security content:
This has nothing to do with this issue in this thread, it just happens to have been published today and yet no kb is public.
Security Update for Windows Server 2003 (KB3048051)
Locale: All
Deployment: Windows Update, Microsoft Update, Automatic Updates, WSUS, and Catalog
Classification: Security Updates
Target platforms: Windows Server 2003 and Windows XP
Approximate file sizes:
Windows Server 2003 update: ~ 196KB
Description:
Install this update to resolve an issue which requires an update to the untrusted certificate store on Windows systems and to keep your systems up to date. After you install this update, you may have to restart your system.
http://support.microsoft.com/kb/3048051
It is related to the SSL cert revocation and Microsoft is very lame these days and gets the code on MU but can't sync up the KB.
See:
* Microsoft Security Advisory (3046310)
- Title: Improperly Issued Digital Certificates Could Allow Spoofing
- https://technet.microsoft.com/library/security/3046310
- Revision Note: V2.0 (March 19, 2015): Advisory rereleased to
announce that the update for supported editions of Windows
Server 2003 is now available. See Knowledge Base Article 3046310
for more information and download links.

Can't log into User Account after disrupting external hard drive

I keep my account (Admin) on an external hard drive due to the large volume of data. I mistakenly pulled out the USB cable to the drive while trying to resolve another issue. Subsequently, it appeared a lot of my data was missing. I restarted the computer and couldn't log into my user account. It seems pulling the USB cable to the external drive corrupted something. I verified both disks (internal & external) and all was OK. I ran Disk Permissions and tried to repair. The resultant information is attached at the bottom of this message.
I can access my data on the hard drive from my laptop over the network. I just can't get into my user account directly. Any ideas on how I can address this issue?
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/classlist" , should be 0, user is 95.
Permissions differ on "Library/Frameworks/HPPml.framework", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Frameworks/HPServicesInterface.framework", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Printers/hp/Frameworks/Matterhorn.framework/Versions/DI_MH.A.05.01.001 /Resources/Info.plist", should be -rw-rw-r-- , they are -rwxrwxr-x .
Permissions differ on "Library/Printers/hp/Frameworks/ResourceManager.framework/Versions/DI_RM.A.04.0 7.000/Resources/Info.plist", should be -rw-rw-r-- , they are -rwxrwxr-x .

There may have been another solution to this problem but I went the route of creating another user name and migrated the data over to that name. Thank you!

Can't log into Game Center after installing Mavericks

I haven't been able to log into Game Center ever since I installed Mavericks.
When I try to open it through Spotlight, I get a "Game Center quit unexpectedly" message.
When I open it directly through the Apps folder, it opens fine, but I get this message when I try to log in:
Couldn’t communicate with a helper application.
Try your operation again. If that fails, quit and relaunch the application and try again.
Any help would be greatly appreciated!

Can anyone help please I have been able to download apps send and receive emails.. Just not log into Game Center has anyone got any idea what is going on please. Both Game Center accounts are on the same devise but that has been working up until now.....

Can't log into Snow Leopard after hardware repair.

I recently had the display repaired on my macbook pro. When I got it back I attempted to log on. My account was gone from the log in prompt and the only account choice was "Other". My account name and password no longer work. I then booted into windows to see if my data was intact and it is still there. How do I log into my account on Snow Leopard?

Other indicates that the repair station enabled the root user account. Contact them for the password they used and see http://docs.info.apple.com/article.html?path=Mac/10.6/en/11778.html for steps on disabling it and getting your account back.

Can't log into admin console after install

I have installed CF10 on an Amazon AWS Windows 2012 instance. No matter what I use for the admin console password during setup, the password is not recognized when setup is complete and I try to log into the admin console. I've uninstalled and reinstalled four times trying simple as well as complex password with no luck.

Try to login from your machine rather than server itself with different browsers.
Also, run the passwordreset.bat(C:\ColdFusion10\cfusion\bin) and try to change the password. Then login.
HTH
Thanks
VJ

Can't boot into Mac OS after Windows install via Bootcamp

Hello.
Last night I installed Windows 7 on my Macbook Pro early 2011 via Bootcamp.After some major complications I was able to finally install Windows 7 and boot into it. Now I can't boot back into my "Macintosh HD" partition, it shows a no entry sign.
Hard Disk : 320GB Internal Sata
Partitions : 3 -> Mac, Bootcamp and 10.8 Recovery Partition
The good part is that I can still access the Mac OS partition in Windows and Windows is working perfectly fine. As a matter of fact right now I'm on the bootcamped windows.
I have a full time machine backup but still I am looking for a way to solve this without formatting the HDD.
Things I have tried:
1. Resetting NVRAM and PRAM
2. Booting into 10.8 recovery partition and running DU.
SMART Status : Verified
"Macintosh HD" grayed and Not Mounted
Successful Verify Permissions (Twice)
Is there a way to solve this? Though the Mountain Lion partition shows when I press the Alt/option key on startup but I can't somehow boot into it.
Thanks

Your problem is OS X is refusing to boot.
There is still a bootable volume on the Macintosh HD partition, it's just not working.
You can #8 Reinstall Just OS X while command r booted from the Recovery partition, as long as you don't use Disk Utility to erase the Macintosh HD partition, your files and programs remain.
Hook the computer via Ethernet cable to a router (or modem, power reset required) with a fast relaible internet connection, you will need your AppleID and password to reinstall OS X.
Step by Step to fix your Mac

Cannot Log into AIM account after multiple tries

This problem is a nightmare. I really do appreciate the support. Unfortunatly the fix is only temporary. Here is what is going on and what Fixes I have tried.
The problem is on my parents G5 power PC (~2006)
They have an AOL AIM account.
Ichat worked great for about 4 months.
Then the problems occurred (Can not log into AIM account after mutliple tries).
We have tried:
Switching to port 443 - this has not worked ever time we have tried it.
Deleting iChat.plist, iChatAgent.plist, and iChatAIM.plist (left the other ichat plists alone like Jabber, Agent, Subnet,etc)
This this restores ichat for about a day then back to the same problem.
We have also tried running disk utlity and repairing permissions and get it going for day some times.
Not sure what else is causing it to drop out and having to delete this times again and again? Any ideas?

On the Netgear
The Access IP is normally 192.168.0.1 and the User ID is admin and the password is password when the pop down appears.
----Under SYSTEM PREFERENCES>NETWORK It shows Airport Connected to "Netgear 192.168.1.3" do not see User ID or password on the screen?
In the menu on the left the last (or near last item) is UPnP.
Check this is Enabled.
----Do not see this listed anywhere
About two thirds of the way down the menu is WAN Set up
In hear Disable the Port Scan Line (It will read DOS (or SPI) and Port Scan)
There is another Line about "Blocking Responses to Ping on the WAN port" this needs to be Disabled as well (IChat sends a Ping to confirm where the Visible Invite went to is where the SIP stuff (In the Log about the error) is coming back from).
On the DNS info.
This should be two IP address normally that are on the Internet.
These should appear on the RCA if it is accessible in a web Browser but more likely on the Router's Set Up pages (or Some sort of Summary page).
A 192.168.x.x address points to the Router (I would guess in this case) and whilst some routes can be DNS servers as well it is not that common and is only really useful to link a MAC (Ethernet and/or WiFi Card - Media Access Card Address) info to a Name for the Computers that are attached.
----Not sure where to find all this in OS 10.5.8
----Under System Preferences>Network with Airport highlighted I click advanced and go to TCP/IP is see two addresses the ipv4 = 192.168.1.3 and the router=192.168.1.1
(I have presumed that there are no other DNS servers are listed and the 192.166 bit was a typo)
---Correct i put a typo as i was not sure if it was secure to post.
If the Computer can do Wifi as well as Ethernet it should not have both Connected to the Router at the same time. (iChat "Sees" it as two Connections to the Internet).
--- The computer is only connected via Airport to the netgear router.

Cannot log into my iCloud after resetting apple id password.

I can't log into my iCloud after resetting apple id password. Any solutions for this?

Need a little more info. You reset your Apple/iCloud ID, and you cannot log into iCloud where? What is the error?
Cheers,
GB

After upgrading to Snow Leopard, I can not log into the computer. What Can I do?

after upgrading to Snow Leopard, I can not log into the computer. What Can I do?

SqueezeAce wrote:
after upgrading to Snow Leopard, I can not log into the computer. What Can I do?
Stick the 10.6 disk into the machine and reboot holding the option/alt key down on a wired/built in keyboard.
On the second screen, under the Utilities menu is a Password Reset, use it.
Step by Step to fix your Mac
What this will do is reset the password and the user account permissions in the process.
You might have problems with Keychain afterwards, to fix that.
https://support.apple.com/kb/HT1631 https://support.apple.com/kb/TS1544
If your still having trouble, look through these User Tips
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

Why can't I log into my mac after yosemite

I had to restart my mac after it froze. It does this a lot since I downloaded Yosemite. When I restarted there were two accounts mine and a guest user. I enter my password and it says it can not log into my account at this time because of an error. ***!! My password is correct I know it is what the **** is going on and can anyone help me fix it please?

You're using the "legacy" (pre-Lion) version of FileVault, and the disk image file on which your home folder is stored is corrupt.
This condition is quite difficult and time-consuming to recover from. If the procedure suggested here is too hard, get help from someone more experienced. One option is to make a "Genius" appointment at an Apple Store. Legacy FileVault is obsolete and should not be used under OS X 10.7 or later.
If you have another user account with administrator status and can do so, log in to it and skip to Step 4.
Step 1
Start up in Recovery mode. The OS X Utilities screen will appear.
Step 2
Select
          Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Select your startup volume if not already selected. Pull down the menu labeled Select the user account and select
          System Administrator (root)
Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
           ▹ Restart
from the menu bar.
Step 3
At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 4 in the Password field. You should now be logged in. Do nothing while logged in as root except as indicated below.
Open the Users & Groups preference pane. Create a new user and check the box marked
          Allow user to administer this computer
Restart and log in as the new user.
Step 4
Load this web page in Safari.
Triple-click anywhere in the line below on this page to select it:
sudo dscl . -delete users/fubar HomeDirectory
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the TextEdit application. Paste into the window by pressing command-V. Substitute the short name of the affected FileVault user for the word "fubar".
Triple-click the edited line and again copy to the Clipboard.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window. When prompted, enter the password of the user you're logged in as. Nothing will be displayed when you type it. Type carefully and then press return.
Step 5
You should now be able to log out and log in as the FileVault user. Your files still won't be available. FileVault is inactive.
Locate the disk image file named "fubar.sparsebundle" or "fubar.sparseimage" at the top level of your home folder. Again, substitute the short user name for "fubar".
Step 6
Try to open the file. If it won't open, try to repair it in Disk Utility. If it still won't open, restore it from your most recent backup. Keep trying older backups until you find one that works. If you don't have a backup, the data is lost, perhaps beyond any hope of recovery. There's a slight chance that you might be able to repair the disk image using an expensive third-party application called "Disk Warrior." If possible, go to a "Genius Bar" where the software is available for use by the "Geniuses" at no charge.
Step 7
Copy the files from the mounted disk image to the corresponding subfolders of your home folder. The Library folder is invisible in the Finder. Open it by holding down the option key and selecting
          Go ▹ Library
from the Finder menu bar. Open the copy on the disk image by selecting
          Go ▹ Go to Folder
and entering
/Volumes/fubar/Library
in the text box that opens. Again, substitute the correct name for "fubar".
Log out and log back in.
If there isn't enough disk space available to complete this step, unmount the disk image, copy the disk image file to an external storage device, delete the original, and try again.
Step 8
Back up all data, then delete the disk image file.
Step 9
Delete the user you created in Step 3, if applicable.
Step 10 (optional, but recommended)
Follow the instructions in this support article under the heading "Disable the root user."

Can't log into server after 10.5.5 update

After running the 10.5.5 update on our Intel Xserve, it keeps getting stuck at the login window. I typed in the correct admin login info, the window would go away as if it was going to the next step, then it came back again. All services are running fine and I can get on via SA and WGM (from another computer) but not to the Desktop (via Remote Desktop). I noticed every time I try to log on (correctly) as admin, the whole service would restart. I get this from the Terminal window while I ssh and logged in from another computer after hit the Log In button: Sep 16 11:23:17 server1 loginwindow[2249]: Unable to load Info.plist exceptions.
Any ideas? I am afraid to update the other Xserve now..... Thanks!

I have a similar problem, although with 10.5.4 rather than 10.5.5... Seems all services work, however, I can't log into the Finder.
I just set this server up 2 weeks ago, so was able to give the users back their previous server for the time being. However, after an hour on the phone with Apple, their techs have exhausted all ideas. Here's what I've tried so far with prompting from Apple...
1. boot from dvd, run permissions and disk repair
reboot. no difference
2. from a remote machine, access WGM, add new user, check home folders of existing users, check permissions, create another administrator user with a new home, try again with new user, no difference.
3. wipe preferences via Terminal: boot single user, mount -uw /, run mv /Library/Preferences /Library/Prefencesold
reboot. no difference
4. changed preferences back to where they were by removing new (rm), and renaming old (mv) - still no access to finder
5. suggested remotely installing 10.5.5 as last resort - this is the last idea the Apple technician had. I haven't done it yet.
It seems to be a corrupt finder or login issue more than a server issue as all services are running fine
6. In single user mode again, I tried a rm .AppleSetupDone which allowed me to recreate the server user and settings, but still did not allow access to the Finder.
7. One of the other techs here suggested safe mode, hadn't tried that. - still wouldn't allow me to log into the Finder
8. Tried boot from Disk Warrior DVD (latest version) - wouldn't boot
sigh...
Ideas anyone? I'm close to wiping and rebuilding this server, however the user permissions are a little bit intricate so it would sure be nice to get it running again.
thanks, Dave

I can't log into my main account with my password, always gets me back to the log-in screen after upgrading to 10.7.5

After my routine software update to 10.7.5, I can't log into my main log-in id. Whenever I put my password in, it takes me back to the log-in screen. I'm sure of the password not being wrong because i can access my other admin accounts from which i changed the password. All my files and data is in that id. Please help. Thank you.

http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/

Can't log into Adobe Story on windows 7 after installing flash player10. no problems w/win98 @work.

Can't log into Adobe Story on windows 7 after installing flash player10. no problems w/win98 @work.

I downloaded Adobe air and the desktop app for story and can get online from that. Thanks anyway. T

Can't log into Ent.Man after 10g install on win xp pro.

Similar Messages

Maybe you are looking for