Can't log on to my Satellite T130

I recently purchased a used T130 from our work's staff sale. This was a customer return, and had the log on password enabled.
Unfortunately I dont have the password & contacting the customer is proving tricky. I have all the documentation and the install disc supplied by Toshiba, but the T130 has no disc drive.
I dont know much about windows & or Toshiba computers so, my question is this: How can I get this computer to work for me?
Can I boot into safe mode and change the log on details?
Any help would be much appreciated.

Obtain external USB optical disc drive and install operating system again.
I dont see other possibility for you.
Password protection will be completely worthless if anyone could change it in safe or any other mode.

Similar Messages

I can't log onto-into my Satellite P750 Win 7 profile

My laptop is a SATELLITE P750 with Windows 7. I started it today and it loaded windows fine, up to point where it requests my profile password.
I have not changed this in years and know it is correct but i keep getting the message 'The User Profile Service service failed the logon. User profile cannot be loaded'.
I do not have any backups made :( silly me.
Any ideas how to get past this as I can't get on my Laptop.
ps I would rather not have to re-install windows or anything too major
Thanx Chris

Hello, I have, since asking this question, found the answer through windows.microsoft.com
If you ever have the same problem, google the message 'The User Profile Service service failed the logon. User profile cannot be loaded' and follow link to support.microsoft where they give you three options to fix. I used the 1st method using regedit and changed the s-1-5 files in the profile list as explained.
This fix worked perfic
May all you IT troubles dissolve away like mine.

Satellite T130 - Can't start the Toshiba HDD recovery

Hi all, I have a problem with my Satellite T130. I have to start the Toshiba HDD Recovery but the computer tell me that there isn't a valid HDD recovery on the PC. Probably this is a my fahter's fault. There is another way to start the recovery?
Thanks

Hi iceknight,
Of course you can install Windows from a normal Microsoft Windows disk thats no problem. There are some guides you can find using Google to copy the Windows 7 disk content on an USB stick and then you can install Windows 7 from a USB stick.
But easiest way is you order a recovery disk from Toshiba directly. The recovery disk contains all necessary drivers and tools so the original out of box settings can be restored:
https://backupmedia.toshiba.eu/landing.aspx

Satellite T130 - Can I use a SSD?

Is it posible to use SSDdisk in Toshiba Satellite T130-K ?

Hi
Theoretically it should be possible to use a SSD in your notebook. I dont see any reason why it should not work.
I mean SSD have also SATA interface as normal HDDs but only the technology is different. So you can try it and then post your result here. Im interested in it. :)

Re: Web Camera is not working on Satellite T130

I have a Satellite T130 and the web camera has just stopped working.
Can anyone tell me how to get this going again please?
Thanks

Also check the BIOS, on some models there is an option to disable the Webcam in the BIOS.
And also ensure Skype, Messenger, or other programs that use the webcam are not running, only one application can use the webcam at a time.

Satellite T130: inbuilt web camera has stopped working

Hi, I have the same problem of the question bellow, like I have looked around and I was not able to find the answer I need.
I have a Satellite T130 and, suddenly, the inbuilt web camera has stopped working properly. A blue light is on, but there is no image. What can I do?
Thank you

Hi,
the blue light is beside the web cam, on the top of screen. But this light is on when I try to use the web cam in anywhere, like Skype, Msn or even in programs in the computer that only take a pictue or make a video of you, without ineternet (I do not know the name of this program). But it seems that computer and the programs recognize the web cam, because there is no messages when I turn on the web cam.
In Skype settings is the same, there is nothing wrong, there is no different message. The only thing is when I try to take picture a message appears: "failed", but the video seems to record normally, although everythng is black.
Could you understand what I meant?
Sorry about my english....

Satellite T130 keeps restarting instead of shutting down

Just bought a refurbished Toshiba Satellite T130 laptop pre-installed with Windows 7, and since we got it, it has had a problem shutting down.
When I press Shut Down, it shuts down ok, all the lights go off as if it just shut down, and then a couple of seconds later, it starts up again.
I can't seem to find the issue here, sometimes it restarts fully into windows, and other times it turns on and hangs without turning on the display etc.
I have tried to update the BIOS, reinstall windows on a second partition, even reinstall every driver from the toshiba website.
It should also be noted that when I put the system to sleep, it puts the PC to sleep and then a couple of seconds later, it restarts, bringing up the good old "an error occurred, would you like to start in save mode, start windows normally" etc.
When entering hibernation mode, it hibernates just find, and then turns back on again...
I've been reading many support forums and none of the solutions worked.
Any help would be greatly appreciated!
Thanks!

Hi sam899,
Im not Satellite T130 owner but the same issue I noticed on my Satellite U500. So I checked the BIOS for following options:
-Wake up on LAN
-Wake up on Keyboard
-USB Sleep & Charge
I disabled all these options and restarted the notebook. After this I noticed that the notebook shuts down properly. :)
Furthermore if you have external devices connected like mouse, keyboard, printer, etc. Remove them all and test it again.

Satellite T130-02F - Display Driver Error

Hi There,
I just purchased the Satellite T130-02F and after choosing 32bit running system I had the power connected to charge battery up and then started to get "display driver errors" where the screen would flash black and then flash back on. I've checked device manager and driver details, the drive is upto date and as far as I can see is the correct driver. I've searched sites to see if there ar other drivers out there, but its up to date.
I haven't installed anything extra on the computer yet and find I get the error more regularly on the battery rather than power which concerns me. The computer is less than 24hrs old.
Any advice?
Mobile Intel (R) display chip set.
Windows 7 installed 32bit.

Hi
In your case I would try reinstalling the display driver. You can find the latest version on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
After this make sure that the newest BIOS version is installed. You can download it on the Toshiba website too.
If nothing works your only chance is an authorized service provider. It seems to be a hardware problem and must be checked from professional people.
Greets

Satellite T130-11U lost Bluetooth connection after installing Mobile Broadb

I recently bought a Satellite T130-11U and established a connection with my Nokia N82, using PC Suite.
Then I installed my Mobile Broadband (TMN operator) and lost the Bluetooth connection.
There must be some way to overcome this "conflict".
Anyone faced the same problem?
Thank you.

Hi
Maybe this 3rd party application is not compatible and this is the reason why this happens
But first of all you should check if the Bluetooth is still enabled
Furthermore you should check if this issue would happen after installation of new BT stack
Here you can find the new BT stack:
http://aps2.toshiba-tro.de/bluetooth/
Greets

Satellite T130 -Black screen- HDMI works perfectly

The problem started as a HDMI-cable was plugged into my running Satellite T130-17E and the screen was closed down. From that point the notebook screen stopped working. When booting the windows start-up logo is on for a couple of seconds and just before the entering the desktop the cursor is visible on the screen. But except from these short moments there is no action on the notebooks screen. When I reinstalled the driver to the graphic card there was some short moments (less than 0,5 sec) when the screen was active.
I can use the notebook without any problems via HDMI to my TV. And when I adjust the screens brightness (FN+F6/F7) the black screen can get more back-lighted.
When I turn off the HDMI-output or plugs it out - nothing happens on the notebooks screen.
Can some of you please try to help me out as I really need my notebook to work normal again. If you can help me sort out this problem I'll be very grateful-
Kind Regards,
Jacob Lindberg

When I use FN+F5 to use LCD only - there is a very short moment when i can see the dekstop on the notebook screen, but then it turns black again.
When I try to duplicate the output on HDMI and on the notebook screen - the notebook black is very backlighted when compared to the notebook screen when only the HDMI-output is used. When I switch between the different options on FN+F5 there is som very short moments when some the the notebook screen is active - but it is like a millisecond.
Is there any thing else I can do?
Message was edited by: Lindberg

Satellite T130-12G - crazy touchpad

Hi all,
My brand new Satellite T130 12G is running well except the touchpad wich becomes crazy after some minutes of usage.... Does anyone has the same problem ???
I uninstalled the synaptic driver, but still the same after 5 minutes....
The behaviour is for example as follow : The arrow goes up and down when i go up...
Cannot go left or right or when working, it is out of control ....
If anyone can help
Thanks
Baloo

Hi
Its nice to hear that you could improve the touchpad functionality.
I found also some tips and tricks which you should try out:
First of all you should change the touchpad sensitive settings to lower level.
Go to control panel -> mouse and set all adjustments for the touchpad to a a less sensitive level.
You should also click right Synaptics Pointing Device (in taskbar) and look in middle of page for Double Click Speed. Move the slider to halfway on the range. This should help you too.
Last but not leas you have to disable pinch zoom.
Go to the Synaptics Pointing Device icon in the lower right hand corner, click on "Pointing Device Properties", click on "Device Settings" tab and then settings button.
Under "Pinch Zoom" uncheck "Enable Pinch Zoom".
Greetings

DDR3 RAM usage on Satellite T130

Hello, can i use DDR 3 1066 MHz instead of DDR 3 800 MHz in my Satellite T130-12K ?
Thanks in advance

Notebook will not run faster. I dont know what is the front side bus speed on this model but I presume it must be 800MHz.
HERE is the specification. Generally speaking you can use faster modules but they will not run on maximum speed and they will be throttled.

How to recover my Satellite T130-13L?

Hello !
I would be pleasure to have any answer and help for my quistion bout how to recover my pre windows for my Satellite T130-13L, cause my system dropped down and I had Windows 7 Home pre edition 64 bit n cause there were some gamed didn't work with it I have changed it to Windows 7 Ultimate 32 bit and I was unlucky to change it cause I couldn't get the software and drivers for 32bit so can you help me with steps please to how to recover my pre windows and return it back to the 1st time by steps please or can you advise me from where I can get my drivers and software for Windows ultimate 32bit ?
***1- How to recover my 1st Windows home pen 64bit.?***
***2- how can I get the drivers for Windows ultimate 32bit?***
I will be greatful for your help as soon as you can
Yasso

Hello
As far as I know your notebook was delivered with HDD recovery image. That means it is saved on second HDD partition. If you want to have original state again (factory state), install OS again using HDD recovery procedure. How to do this you can read in http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
In the whole story I see one problem. Notebook is delivered with HDD recovery and I believe it was Win7 64bit only. When one other OS version is installed you will lose HDD recovery option and OS can be installed with recovery DVD only.
So my questions to you:
Can you start HDD recovery procedure as described in Toshiba document?
Have you created recovery DVD following instruction described in users manuals?

Can not log on after successfull installation - SAP Netweaver Trial JAVA

Hello,
I have successfully downloaded and installed the NW Java trial. (NW_JAVA_700SP14_SR3.rar)
I can see in SAP MMC that all the services was started. At http://vjm:50000 I can see the default page.
Unfortunately I can not log on to any page that need SAP authentication (eg. User management, NW administrator),
but can log to pages which needs just basic browser authentication (eg: Web Service Navigator, UDDI client, System Information).
The portal also does not let me log on (http://vjm:50000/irj ).
When I get the standard SAP NW log on screen, after entering Administrator with the correct master password, simply the log on screen appears again (the password field is cleared). I also tried some incorrect user name / password just to check the difference. In that case I got the correct error message.
I installed the software with WMware, Windows 2003 server, allocated enough disk space and 1.6Gbyte RAM. The installation finished without errors. Prior, I installed the MS loopback too (tried without it too). In SAP MMC everything is green, only have an open alert in J2E 00 -> Services -> Security -> Aggregated Data -> Invalid session count "262 > 200 last reported value above treshold".
I am using the standard internet explorer coming with Win2003 server.
Tried the users: Administrator, SDM, Guest, ADSUSER. I know that the password is correct, because I don't get any error if I use it, just getting the log on screen back ...
Could anyone pls help me how can I log on to the system? Or is there any security trace file or log which could help me solve this problem?
I am desperately trying to install this trial, I completely reinstalled the software 5 times but still can not use it
Laszlo

Hi,
is your problem persisting?
CAVE: If you use a wrong user/pw combination > 3 times the account of the user may be locked!
try j2ee_admin instead of administrator or try adm together with your Masterpassword
Do you have to specify the users pw inside the installation procedure? In "normal" installations this has to be done.
If not the pw´s in the documentation of the previous answer`may fix your problem.
The sap mmc is irrelevant for user authentication.
Green means your system is running, nothing else.
kind regards
Tom

Admin can not log in after migration Teaming

Hello,
I did migrate Teaming 1.0.3 (SLES 10 SP2) to Teaming 2.1 (SLES 10 SP 2) on a different server according to information from this web site Novell Documentation
Everything worked with one exception admin account can not log in :(
The rest of the account works, but users are taken from LDAP.
I tried to use the old admin password as well as a new admin password set during installation Teaming 2.1
In catalina.out log I got:
WARN [http-9080-1] [org.kablink.teaming.module.authentication.impl.Aut henticationModuleImpl] - Authentication failure for zone 1: org.springframework.security.BadCredentialsExcepti on: Bad credentials; nested exception is org.kablink.teaming.security.authentication.Passwo rdDoesNotMatchException: Password does not match for user [kablink,admin]
I think that something has gone wrong with the admin account password after the migration but I do not know how to fix it.
I tried to change the password for the admin account directly in the database table but I do not know what hash algorithm is used by Teaming 2.1
Does anyone encountered such a problem?
How can I set a new password for the admin account directly in the MySQL database?
Best regards,
Piotr Szewczuk

Originally Posted by pszewczuk
Hello,
I did migrate Teaming 1.0.3 (SLES 10 SP2) to Teaming 2.1 (SLES 10 SP 2) on a different server according to information from this web site Novell Documentation
Everything worked with one exception admin account can not log in :(
The rest of the account works, but users are taken from LDAP.
I tried to use the old admin password as well as a new admin password set during installation Teaming 2.1
In catalina.out log I got:
WARN [http-9080-1] [org.kablink.teaming.module.authentication.impl.Aut henticationModuleImpl] - Authentication failure for zone 1: org.springframework.security.BadCredentialsExcepti on: Bad credentials; nested exception is org.kablink.teaming.security.authentication.Passwo rdDoesNotMatchException: Password does not match for user [kablink,admin]
I think that something has gone wrong with the admin account password after the migration but I do not know how to fix it.
I tried to change the password for the admin account directly in the database table but I do not know what hash algorithm is used by Teaming 2.1
Does anyone encountered such a problem?
How can I set a new password for the admin account directly in the MySQL database?
Best regards,
Piotr Szewczuk
I **think** that hash is specified in the installer.xml file. Try also to post your question on the kablink forum: Installation, Configuration, Customization

Can't log on to my Satellite T130

Similar Messages

Maybe you are looking for