Can't log onto Netgear network

Can someone please please help, cannot join my exsiting netgear network, I have a dual G4 1ghz desktop, that is on there with no problem through it's wireless extreme card, I also have a G4 1ghz apple laptop, that also can join with no problem, this is a G5 dual 2ghz, it has the wireless card and from what I see it looks like I can join the "netgear" network after I go to create network and make one, but it is not showing any signal strentgh, it is only about 40 feet from modem and router, any ideas ??

]this is a G5 dual 2ghz, it has the wireless card
Did you also install the exteranl t-shaped aerial?

Similar Messages

  • Windows Vista can't log onto wifi network with Airport Extreme

    Several problems with our network. 1. My sister's new Gateway laptop sees the network I set up from my Mac using my airport extreme, but cannot log on to it even when I removed password/encryption - even when I entered 4.2.2.1 and 4.2.2.2 in my DNS server fields. 2. the reason I even did the above is because although my Mac (Titanium G4 Powerbook previously running 10.2.8) could get on the network through the airport, I could not get to any site Google related until I read about the DNS entries as a work around. Yes the work around works but what's the real problem/fix? Regarding probem 1., some advice I'd gotten was to update the firmware on my base station as it might be a compatability issue with that and Vista. I begrudgingly upgraded to Tiger 10.4.6 then downloaded the patch to 10.4.10 (where I am now) which did lead me to an upgrade for my airport (5.3 to 5.6 now). Still, Windows cannot get on to the unsecure network!! What the heck do I need to do?!

    I hope I may have found how to make the vista machines get to your Time Capsule. On the vista system go to network and sharing center. Then click on status, then you will see a window pop up with wireless network info. Click on Wireless properties and then click the advance tab at the bottom, a box without a check mark needs to be checked which says "connect if not broadcasting". I hope I got that right...try it, it's seemed to help for today at least.

  • Can't log onto a networked computer since upgrade

    I have a Mac min in my office that I access with my MacBook. It was working fine until I upgraded to Leopard. Now when I try to connect I get a message saying that my User ID or password are incorrect even though I'm using the same UID and P/W that I use to sign in at the mini itself! All the Sharing settings on the mini are the same as they always have been.
    Any clues?

    Yes, thanks Daniel, I've noticed today there are a couple of similar threads about this problem here on the forum. And, like you, my Admin access went away for some reason too. I'm going to try some of the fixes that have been offered.
    I also turned off EarthDesk, an app I had running under Tiger. It seemed to be bogging things down as well. Good luck with your fix!

  • Problem with Windows 98 logging onto wireless network

    I have a unique issue that I am having some issues trying to fix. I have a
    PC that is running Windows 98SE that connects to the network via a Cisco
    Aironet 350 wireless card. I removed this card from another PC and it was
    working fine a week and a half ago. I place this card in the other PC and
    install the drivers and Novell Client 3.40 and I can't log onto the
    network. The PC can associate to the AP though. I can also put in a regular
    10/100 ethernet card and get on the network. We use 128-bit WEP encryption.
    I have checked my WEP key and it's correct. I have set the client
    properties based on another PC that is connected so that shouldn't be the
    issue. I have 15 other PC's with the same card and client version that are
    getting on the network just fine. Also when we look at our AP through the
    web interface, in a column where it usually lists the authenticated
    machine's IP addresses, it only says Unassigned for this machine. I am at a
    loss of where to go next with this issue. I have been looking around not
    only Novell's site but Cisco's as well and no dice there.I would truly
    appreciate any help anyone could give me.
    Thank You
    Jami Benson

    On Thu, 25 Jan 2007 14:43:12 GMT, [email protected] wrote:
    >> On Wed, 24 Jan 2007 22:10:10 GMT, [email protected] wrote:
    >>
    >> >I have a unique issue that I am having some issues trying to fix. I have a
    >> >PC that is running Windows 98SE that connects to the network via a Cisco
    >> >Aironet 350 wireless card. I removed this card from another PC and it was
    >> >working fine a week and a half ago. I place this card in the other PC and
    >> >install the drivers and Novell Client 3.40 and I can't log onto the
    >> >network. The PC can associate to the AP though. I can also put in a regular
    >> >10/100 ethernet card and get on the network. We use 128-bit WEP encryption.
    >> >I have checked my WEP key and it's correct. I have set the client
    >> >properties based on another PC that is connected so that shouldn't be the
    >> >issue. I have 15 other PC's with the same card and client version that are
    >> >getting on the network just fine. Also when we look at our AP through the
    >> >web interface, in a column where it usually lists the authenticated
    >> >machine's IP addresses, it only says Unassigned for this machine. I am at a
    >> >loss of where to go next with this issue. I have been looking around not
    >> >only Novell's site but Cisco's as well and no dice there.I would truly
    >> >appreciate any help anyone could give me.
    >> >Thank You
    >> >Jami Benson
    >> By any chance does your Netware network use IPX? (You did say this
    >> card was working, but was it for Netware and TCP/IP)
    >> Does your system get a IP address? Is it in the same range as other
    >> systems?
    >> Is the NW client BOUND to the aeronet card?
    >>
    >Steve,
    > We don't use DHCP. We manually assign IP addresses. We do use IPX on the
    >network, but it is really only used for printing with the print queues we
    >have set up. As to the NW client being bound to the Aironet card, I'm not
    >100% sure what you mean. I apologize about that. I am fairly new to
    >Netware.
    Bound applies to Protocols in general. (W9x versions, Not XP)
    Open "Network". (You can right click "Network Neighborhood", select
    Properties or use the control panel)
    Inspect the "Properties" for each adapter listed on the Configuration
    Tab.
    Do Not change anything at this time, and ALWAYS choose CANCEL for
    safety . Once you have it figured, you will make and save changes :)
    There are 3 groups of entries. Clients,Services,Protocols.
    You choose to "Bind" a particular protocol(s) to a adapter(part of the
    Adapters properties).
    Not all protocols need be bound to the SAME adapter (nor is it
    desired). Example: Bind PPOE to dial-up, TCP/IP to the Wireless
    adapter, IPX to the 10-100T WIRED adapter. << Example, do NOT really
    do this.
    802.11 wireless DOES NOT support the IPX protocol. If your printers
    use IPX (only), then you will need a Print Queue on the server for
    that printer and PRINT to that PRINT Q from the wireless (or IP only)
    devices.
    Ah!
    > Also just as a point of interest, if I remove the Novell client
    >and use strictly IP with the wireless card in, I still can't get the PC
    >connected to either the network nor the internet. I guess I'm saying I'm
    >saying I'm not 100% that this is a Novell issue.
    Start with getting a Internet connection to work.
    That will also indicate that TCP/IP is working.
    When you don't use DHCP, you have to do everything (settings)
    yourself, CORRECTLY :^)
    IP (no clash with existing stations)
    Subnet mask, same as every one else on the network.
    Gateway the A/P
    DNS as needed, one should be your ISP's suggested.
    Is the A/P correctly configured for your Non-DHCP network?
    *AND* are you sure you have the proper adapter drivers for W98(se)????
    >Let me know what you
    >think. Thanks for the help so far.
    >
    >Jami Benson

  • HT1925 I have upgraded to itunes 11.3.8. My library is showing, however I can't log onto itunes. I have logged in with my apple id, but it doesn't come up. Help?

    I have upgraded to itunes 11.3.8. My library is showing, however I can't log onto itunes. I have logged in with my apple id, but it doesn't come up. Help?
    When I click on itunes store within itunes, the screen comes up blank. I'm using a macbook pro.

    I have the same problem. Unfortunately, the troubleshooting link you added has the first step listed as "Verify that FaceTime is enabled in FaceTime > Preferences" which we (the original poster and I) can't do as our Preferences are greyed out. We can't click on them to verify anything.
    In FaceTime itself it's verified my apple id (also double checked via the site) and then it says the email is "verified" but then it freezes and after a minute or so it says "Could not verify the email address. Please check your network connection and try again."
    After checking the network connection, it still doesn't work. It's rather frustrating as it all worked fine until about a week or two ago.
    Any help would be appreciated.
    -H

  • Can not log onto Yahoo Mail on BootCamp Win7. No problem on OSX

    I can use latest version of FF to view my Yahoo Mail account on my MacPro with latest version of Snow Leopard but when I switch to my BootCamp Win7 I can not log onto Yahoo Mail. I don't get any error. It just comes back to the Yahoo Mail log on page. Win7 is current and FF is ver 3.6.13

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I can't log onto my WiFi with my Touch

    I'm using my Touch, AirPort Express and the remote app to control iTunes and play music through my stereo.
    I like it but I'm having some problems. For some reason I can't log onto my own wifi with the touch when I have the wireless network secured, even when I type in the networks password. When I have the wireless security disabled it works fine but when I make the wireless connection secure I can't log on.
    Does anybody know how I can solve this problem? I love the set up but it does me no good if I'm vulnerable to hackers. What am I doing wrong?
    I don't know if it matters but I have a Linksys router.

    I have a PC if this helps.

  • How can I log onto iCloud from my iPad when the option is in grey and therefore not available

    How can I log onto iCloud from my iPad when the option is in grey and therefore not available. I deleted my account as it was showing up with an old Id ( I'd changed my email) but now I've done that it won't give me the option of logging back on. Do I have to do this on another device Or computer linked to iTunes first?
    THanks

    Hi Kate, have you perchance enabled restrictions on your device. (Settings > General > Restrictions)

  • I have my ITunes account on my home Macbook.  Can I log onto my ITunes account from a different Windows-based computer?

    I have my ITunes account on my home Macbook.  Can I log onto my ITunes account from a different Windows-based computer?

    Yes, but your iTunes library won't automatically show up on a different computer; putting it there is a separate process.
    (122714)

  • My iCloud is disabled. I've reset my password numerous times, but that doesn't help. Can someone please tell me how can I log onto my iCloud

    My iCloud is disabled. I've reset my password numerous times, but that doesn't help. Can someone please tell me how can I log onto my iCloud

    If your ID is disabled, you'll have to contact Apple for assistance, either by going to https://expresslane.apple.com, then click More Produces & Services>Apple ID>iTunes Store, App Store or Mac App Store>Disabled Apple ID, or by contacting the Apple account security team: http://support.apple.com/kb/HT5699.

  • I can not log onto PS  Message;Unable to start your subscription for Adobe PS cc

    I can not log onto PS  Message;Unable to start your subscription for Adobe PS cc

    Sign out of the Creative Cloud Desktop app, restart your computer, log in again, and restart Photoshop.
    Benjamin

  • TS2446 I had to reset my apple ID password now I can't log onto any of my apps, I have done all these steps same msg access disabled , How do I fix this...

    I had to reset my apple ID password now I can't log onto any of my apps, I have done all these steps same msg access disabled , How do I fix this...

    Hi kmkrodel,
    I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues accessing iCloud on your Mac or iPad after a change in your Apple ID password, you may find the following article helpful:
    iCloud: Account troubleshooting
    On the other hand, if you are talking about sharing files from your Mac to specific apps on your iPad via iTunes, then this article may be of more use (Note: When using this function, you will only see apps that support file sharing, not all apps on the device):
    iOS: About File Sharing
    Regards,
    - Brenden

  • Updated software on 1st gen. ipad now I can'y log onto internet

    Updated sofware on my ipad now I can't log onto wifi

    Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.

  • Can surf the web, but can't log onto itunes. What got changed?

    Can surf the web, but can't log onto Itunes Store or anything to do with Itunes online. What setting got changed?

    Can surf the web, but can't log onto Itunes Store or anything to do with Itunes online. What setting got changed?

  • Can't log onto my account from my computer but I c...

    I just noticed that I can't log onto my my skype account from my computer. I get an error message saying that Skype does not recognize my login details! I canhowever, log onto my account from my iphone, ipad, and other computers, so my account hasn't been banned or hacked! What is going on and how do I fix this?

    I actually cant log onto any accounts from my computer

Maybe you are looking for