Can't Log-Out Router Setting 192.168.1.1

I have a E4200 router v.01 and when i updated the latest firmware (due to security exploit) it seems that whenever i acess the router settings (192.168.1.1) it doesn't ask me nor to input the admin and the password anymore, using wifi or wired.. I want the usual proccess whenever i go to 192.168.1.1 it will ask me to input my admin and password to change my router settings.. any help will do.. thank you....
Solved!
Go to Solution.

After the successful firmware update, did you reset the router? Well, it is recommended to reset the router after firmware update. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset then try to configure the router and check the status.

Similar Messages

Can't access three routers through 192.168.1.1, Not address of router. HELP?

Long story here, and I am baffled...
My parents were initially connected to a broadband connection through a wired BEFSX41 router. After moving the computers to another room had major connectivity issues. Tried to access router through 192.168.1.1 and could not. Ran ipconfig and found address to be 76.180.104.1. Tried reset, power cycles, release and renew, could not get it to go back to 192.168.1.1. Brought a WRT54G I had over, had normal results for a brief period(10 seconds tops) then again, same ip address and connectivity issues. After this I brought both routers home, connected them to my laptop, but not my network, inspected the configurations and updated firmware, with no issues. So to narrow down issues I brought the WRT54G to my sisters house. She runs a WRT160N. Before changing anything I accessed 160N through webpage, checked settings and verified ip through ipconfig to be 192.168.1.1. All ok. Replaced her 160N with 54G and had wrong ip address again, also 76.180.104.1, so I decided router was somehow damaged/corrupted. This is where this story turns really crappy for me. When I reconnected the 160N, the ip address was 192.168.1.1 for 15 seconds, then in ipconfig two ip addresses were shown suddenly. They were 76.180.96.1 and 192.168.1.1. Ran ipconfig again and got only 76.180.96.1, and now I can no longer access router.
My sister talked to a knowledgeable guy she knows before I hooked it to her computer and he surmised a Google redirect virus which I did sign on to. But now it seems the 54G router has transferred this virus/issue to my sisters computer, which then uploaded it to her 160N. Judging by the time delay when initially connecting 54G, I think maybe this virus is somehow corrupting routers? Does this sound possible to anyone? And if so, what are my options to save the routers, and not have to re-image computer drives? Anyone with any knowledge, please help, cause the idea of having to re-image three computers is killing me. Also I did not leave any of the routers with the original password. Thank you in advance for your help.

Good. The symptoms you saw (computer gets public IP address) is most commonly because you connect one of the LAN ports of the router to your modem. That way the computer can talk directly to the modem and gets a public IP address.
Sometimes this can happen if the router crashes and won't boot up (often power light is blinking). In that case, the switch in the router won't separate the internet port from the LAN port again giving computers direct access to the modem.

Problem with my linksys WRT120N i can't connect to the address 192.168.1.1

Hello friends
i need help cuz i can't connect to the address 192.168.1.1
i didn't change the address 192.168.1.1 to an other address but i can't connect to this last i want to change my options
i really need help plz

Make sure that the computer is connected to the router on the Ethernet port..Now,check the ip address on the computer....Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then,Adjust the Browser Settings on the computer....Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...

WRT54G v.1.1 can't get on my interface "192.168.1.1"

Hello, I'm having problems getting into my user interface, and I can't get on any website with my router connected, I try using 192.168.1.1 on internet i.e. and firebox. I also got my default IP through, ipconfig/ all and that did not work, I also try to renewed my IP with ipconfig/renew, no go. All my connections are the way they should be, I even try connecting my router by itself to my PC change the IP address and nothing. Can't someone please help, my router was working when I first plug it but I forgot my wep security and press the reset button on the back and that's when everything started to fail..............

As you want to Upgrade your router's firmware you can try the TFTP Utility...
Download TFTP Utility 36.0 KB...
Download Firmware 2.95 MB...
Double click the TFTP.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

I need to change my iCloud email address. I changed it for my Apple id but I can't log out of iCloud to change it there. Find my iPad is activated so I can't delete my iCloud account. I don't have the email address the iCloud login has anymore.

I need to change my iCloud email address. I changed it for my Apple id but I can't log out of iCloud to change it there. Find my iPad is activated so I can't delete my iCloud account. I don't have the email address the iCloud login has anymore so I can't have the password sent there. To sum it up, iCloud has an old email for the account log-in. I don't remember the password for the old email. I have Find My iPad activated so the iCloud account cannot be deleted. And I am already logged out of iTunes & App Store.

If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple IDand that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

Can't log out of iCloud on iOS7?

I created a new iCloud account separate from my family's on my laptop. I'm logged into my phone with the same email as the new iCloud account, but the iCloud account is still the old one and the email address is grayed out so I can't change it. I tried logging in/out of mesages/facetime on my phone like I've read other people recommend but nothing changes. I tried plugging my phone into iTunes but still nothing. I can't log out off the iCloud account because the only option is to "delete account", but it's not solely my account so I can't do that either.
Any ideas?

If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How can I log out of my Apple ID on my iphone 4 because I have the iphone 5 now?

I bought an iphone 5 but still had the iphone 4. How can i log out of my apple id on the 4 so i can sell it without worrying about someone having access to my things?

Jae Sinz wrote:
...How can i log out of my apple id on the 4...
Settings > Store > Apple ID = Log out.
Jae Sinz wrote:
...so i can sell it without worrying about someone having access to my things?
ERASE / Clear All Data
Go to Settings > General > Reset > Erase all content and settings

I have 2 iphones, one for personal and one for business. I need my phones not to sync otherwise they will both ring all the time. How can I log out of my icloud and unsync my phones?

I have 2 iphones, one for personal and one for business. I need my phones not to sync otherwise they will both ring all the time. How can I log out of my icloud and unsync my phones?

Syncing your phones to the same iCloud account won't cause them to both ring all the time, it only puts the same contacts, calendars, and other synced data on the phone. The phones will only ring with someone calls the number associated with the phone.
If you want to stop using iCloud on one or both of the phones, go to Settings>iCloud, tap Delete Account, then choose Keep On My iPhone when prompted. This will disconnect them from iCloud and keep a copy of the synced data on the phone.

Can I log out from my Mac using Terminal.app?

Is there a command I can issue in Terminal.app to log myself out? I'm just looking for a command-line equivalent of Apple >> Log Out. I would like to script this action so I can add it to my dock. Thanks.

Hi--
I wasn't able to find a way to completely log out via the Terminal (i.e., quit all apps and go back to the login window), though I did find a way to suspend the current login session (your apps are still running when you come back, much like with fast user switching):
<pre class="command">/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/CGSession -suspend</pre>
You can also log out via AppleScript:
<pre class="command">tell application "System Events" to log out</pre>
Just save it as an application and put it on your Dock. I didn't do much testing, though, so I don't know if it'll quit your apps for you cleanly. Basically, I just got to the point where the dialog came up and left it at that.
charlie

HT4865 I just bought this ipad and cannot log out from icloud because i dont have the password.how can i log out from icloud?need help

I just bought this ipad and cannot log out from icloud because i dont have the password.how can i log out from icloud?need help

You need to return it to the seller and get your money back. You cannot reset or use the device with another AppleID installed unless you know the password for that ID.
If the device has been jailbroken, no one on here can give you any further help...the Terms of Use prohibit us from doing so.

How can i log out of an account on my mail app on my computer

how can i log out of an account on my mail app on my computer

Mail > Preferences > Accounts > Account Information > Enable this account: uncheck

Can I log out the game centre on my pad and let someone into there game centre and play one of there games

Hi all can I log out of game centre on my pad and let someone else log in to play one of there games

``````Apparently it is in 'setttings' now.
Tried logging out from there. may need a couple of times. it seems to auto 'relogged' back in.
a little annoying

How can I log out in Adobe Creative Cloud?

My Creative Cloud is logged in the mail from my ex boyfriend, and I can't even enter or leave. How can I log out to enter in my account?
Any help will be great

The Email in the forum in verified, are you trying to sign in with it, if you are still getting the issue, please contact Adobe CC at
http://adobe.ly/yxj0t6
Regards
Rajshree

When viewing Facebook, the blue menu bar at the top disappears. I can only log out by going to 'Messages' where the menu bar comes back. Any ideas?

When viewing Facebook, the blue menu at the top disappears. I can only log out when I go to messages and the menu returns. Any ideas?

These files were lost two years ago.
That's not consistent with what you wrote in your first message. I can't help you unless I know what's going on. Either you do, or do not, have backups of all the data you want to keep. If you do not, then the first thing you need to do is back up those files. It makes zero sense to do anything else. In order to back up, you'll need either of two things: another Mac, in working order, with a FireWire port and enough space on its internal drive to hold your files; or an external drive, also with enough space.
On the other hand, if you do have backups, or if you simply don't care about any of the data, then the solution to your problem may be quite simple. All you have to do is boot from your installation disc (your profile says you're running Mac OS 10.5), erase your internal drive, reinstall the Mac OS, then restore your data from backup. You will need to be selective in restoring software, because incompatible software may be what caused the issue.
But it's also possible that you have a hardware failure, in which case you can't get your computer working again until it's repaired.

Can I log out of icloud without losing information and pictures?

Can I log out of Icloud without losing pictures and info?

Back them up, sign out, Restore them. They will be deleted (from your computer, but not from your iCloud account) when you sign out.

Can't Log-Out Router Setting 192.168.1.1

Similar Messages

Maybe you are looking for