Can't logging after upgrade
Hi,
yesterday i've upgrade Quicktime and iTunes, after the reboot i'm not able to logging. The logging screen appears few seconds and blue screen and logging screen and sometimes black screen.
Someone can help me before i've to reinstal the OS
Fabien
I've had to turn off 'HTTPS log on' from Hotmail on my PC through their advanced privacy settings to get Hotmail to work on my Nokia N8 Nokia Browser. I used to be able to log on with HTTPS on my N8 BEFORE the Anna upgrade. Why can't I still log onto hotmail with HTTPS from my phone AFTER the Anna uprade?
Are there any settings on my phone to change to enable HTTPS browsing on it?
I don't get the pop-up either when I'm logging onto my Facebook from my N8 anymore after the Anna upgrade. Something like 'Accessing secure page. Continue?' or something like that. It was a prompt that appeared straight after signing into Facebook or Hotmail. Why has that prompt disappeared?
Anybody got any ideas about any of this?
Thanks
Similar Messages
-
For Those Who Can't Boot After Upgrading To 10.5.6
For Those Who Can't Boot After Upgrading To 10.5.6
(and i am one of those)
how is Apple supposed to make them able to install future fixes and updates
once they finally acknowledge and address this horrible bug?
will they send free bootable CDs with the updates to 10.5.6?What "Boot ROM version" do you have (check in the system profiler under "Hardware")? If it's not MBP31.0070.B07 or MBP21.00A5.B08, then you will need to update your MacBook Pro's firmware. To do this, you might need to connect an external display and mouse/keyboard, and then run the computer with the lid closed to bypass the laptop's monitor. Then apply the firmware patch and reboot the system. This might also be doable via "Screen Sharing" if you have that enabled and have another mac handy.
The firmware update is here: http://www.apple.com/downloads/macosx/apple/firmware_hardware/macbookproefifirmw areupdate151.html
Message was edited by: Topher Kessler -
R12 upgrade : Historical data can be traited after upgrade to 12.1.3
Hello,
I'm testing an upgrade from 11.5.10.2 to 12.1.3 =< Path = upgrade to 12.1.1 and upgrade to 12.1.3.
My question is :
If we want run upgrade historycal data in post upgrade ,do i have to run it after 12.1.1 upgrade or i can run it after upgrade 12.1.3 if i didn't start managers betwwen upgrade 12.1.1 and 12.1.3...?
thanksI'm testing an upgrade from 11.5.10.2 to 12.1.3 =< Path = upgrade to 12.1.1 and upgrade to 12.1.3.
My question is :
If we want run upgrade historycal data in post upgrade ,do i have to run it after 12.1.1 upgrade or i can run it after upgrade 12.1.3 if i didn't start managers betwwen upgrade 12.1.1 and 12.1.3...?You can run it after the upgrade when the application is up and use option=hotpatch when running adpatch (does not require an outage).
Oracle E-Business Suite Upgrade Guide Release 11i to 12.1.1 [ID 1082375.1]
Thanks,
Hussein -
I can't restart after upgrading yosemite software, how to restart?
i can't restart after upgrading yosemite software, how to restart?
What backups do you have, and what exactly happens when you try to restart?
-
My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.
I FINALLY got it to work on BOTH iPhone 4 and iPpad 3. Here is what I had to do:
Had to DELETE all e-mail accounts including icloud.
Did a hard reset (hold down button on top right corner and round button on bottom center)
Then once it came back on, the iPhone had ALL of the accounts still on it and it was receivng e-mail.
The iPad receive e-mail until I did the steps above 5 times. Plus, I had to add back all of the e-mail accounts vs. on the iPhone 4 they were there when my phone came on.
Now I am receiving e-mail on both devices normally.
No clue why this happened, but Apple needs to find a fix ASAP. -
WebLogic Server can not start after upgrade from 10.3.3 to 10.3.5
Hi all,
I get follwoing errors after upgrade fmw-share libraries (WLS 11.1.1.3 to 11.1.1.5), if I want to start AdminServer. It seems CLASSPATH is not updated correct. How can I solve this issue?
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JRF Startup Class", java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "AWT Application Context Startup Class", java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JMX Framework Startup Class", java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JOC-Startup", java.lang.ClassNotFoundException: oracle.ias.cache.Startup
java.lang.ClassNotFoundException: oracle.ias.cache.Startup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "DMS-Startup", java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
Thanks,
MohammadHi Mohammad,
You are right, this error seems to indicate that the script environment cannot find the required java classes.
Please try the following:
1. Open a shell (command prompt) on the computer on which you created the domain.
2. Change to the directory in which you located the domain.
By default, this directory is BEA_HOME\user_projects\domains\domain_name, where BEA_HOME is the top-level installation directory of Oracle WebLogic products.
3. Set up your environment by running one of the following scripts:
bin\setDomainEnv.cmd (Windows)
bin/setDomainEnv.sh (UNIX)
On Windows, you can use a shortcut on the Start menu to set your environment variables and invoke WLST (ToolsWebLogic Scripting Tool).
4. Invoke WLST by entering: java weblogic.WLST
The WLST prompt appears.
wls:/(offline)>
5. Then you can start the AdminServer with WLST
startServer('AdminServer','ClassicDomain','t3://localhost:7001','weblogic','password','/home/oracle/Oracle/Middleware/user_projects/domains/ClassicDomain')
This link may also help: http://download.oracle.com/docs/cd/E12840_01/wls/docs103/config_scripting/manage_servers.html#wp1009240
Hope your issue gets resolved.
Thanks,
Cris -
Tenured messgaes in GC logs after upgrading to jdk1.4.2_13
our application is BEA weblogic 8.1 sp4 on solaris box,initially we were getting OOM errors but after upgrading our JVM and resizing Heap settings we are done away with OOM errors.
But in GC logs we are getting Tenured messages.
My Heap settings :
="-XX:NewSize=512m -XX:MaxNewSize=512m -XX:SurvivorRatio=4 -XX:TargetSurvivorRatio=80 -XX:PermSize=256m -XX:MaxPermSize=256m -Xms1536m -Xmx1536m
excerpts from GC logs :
261498.953: [GC 261498.954: [DefNew: 374585K->25176K(436928K), 0.2820820 secs] 1038388K->689202K(1485504K), 0.2822686 secs]
261534.897: [GC 261534.897: [DefNew: 374744K->33018K(436928K), 0.3950738 secs] 1038770K->701819K(1485504K), 0.3952532 secs]
261555.189: [GC 261555.189: [DefNew: 382586K->382586K(436928K), 0.0000436 secs]261555.189: [Tenured: 668801K->538076K(1048576K), 11.3593778 secs] 1051387K->538076K(1485504K), 11.3597008 secs]
398866.226: [GC 398866.226: [DefNew: 349568K->349568K(436928K), 0.0000439 secs]398866.227: [Tenured: 703838K->707334K(1048576K), 11.8975502 secs] 1053406K->707334K(1485504K), 11.8978785 secs]
398981.491: [GC 398981.491: [DefNew: 349568K->349568K(436928K), 0.0000434 secs]398981.491: [Tenured: 707334K->710596K(1048576K), 11.8955832 secs] 1056902K->710596K(1485504K), 11.8959308 secs]
399039.192: [GC 399039.192: [DefNew: 349568K->349568K(436928K), 0.0000456 secs]399039.192: [Tenured: 710596K->712593K(1048576K), 11.9330747 secs] 1060164K->712593K(1485504K), 11.9335147 secs]
Is there anything that we can be used to tweak our heap settings ??Well, you told the JVM to use
256m permspace: -XX:PermSize=256m -XX:MaxPermSize=256m
1536m total heap: -Xms1536m -Xmx1536m
(although the GC log says 1485504K)
of which
512m new space: -XX:NewSize=512m -XX:MaxNewSize=512m
the rest is tenured space: 1024m
(here the GC log agrees saying 1048576K).
Of the 512m new space, the two survivor spaces each take 1/6 of new space giving
85m: -XX:SurvivorRatio=4
the rest of new space is eden: 340m
However the GC log says
eden: 436928K
which leaves 88m to be split between the two survivor spaces
matching -XX:SurvivorRatio=10
It looks like the GC logs totals do not include the survivor spaces as part of the heap
(not a problem as long as you know this)
and new space occupancy after GC is being mis-reported.261555.189: [GC 261555.189: [DefNew: 382586K->382586K(436928K), 0.0000436 secs]261555.189: [Tenured: 668801K->538076K(1048576K), 11.3593778 secs] 1051387K->538076K(1485504K), 11.3597008 secs]
398866.226: [GC 398866.226: [DefNew: 349568K->349568K(436928K), 0.0000439 secs]398866.227: [Tenured: 703838K->707334K(1048576K), 11.8975502 secs] 1053406K->707334K(1485504K), 11.8978785 secs]
398981.491: [GC 398981.491: [DefNew: 349568K->349568K(436928K), 0.0000434 secs]398981.491: [Tenured: 707334K->710596K(1048576K), 11.8955832 secs] 1056902K->710596K(1485504K), 11.8959308 secs]
399039.192: [GC 399039.192: [DefNew: 349568K->349568K(436928K), 0.0000456 secs]399039.192: [Tenured: 710596K->712593K(1048576K), 11.9330747 secs] 1060164K->712593K(1485504K), 11.9335147 secs]I can make sense of these numbers only if everything in new space gets promoted to tenured space on these GC runs.
Maybe you want to try running with -XX:SurvivorRatio=2 -
Can't login after upgrading to leapord
My accounts show up but when I click on one to enter my password I get the beach ball I've let it run for 20 minutes but the beach ball stays... Am I screwed?
I wanted to post as well so Apple can be assured there is a problem. I am also having the same password issues, after upgrading... only one "backup" non-admin account is accessible. I am positive I am typing everything correctly. Also, when I "log out" of this user, I get the blue screen and the "forever" beach ball as well.
Thanks goodness a friend of mine mentioned he was going to test the new system on his laptop first before installing on his main work computer. I decided to do the same. Good thing I did. I can only imagine the problems that are going to erupt after many people receive their upgrades today.
I am going to try the suggestions listed here - *thank you to those that posted* - even though some of the answers are making my head spin . I am beyond aggravated and disappointed that I am having such an issue and I haven't even gotten into using the new system. This is not the Apple I know and love.
Aggravated... -
Viewing Old Transport logs after upgrade
Hi,
We are upgrading from 4.6B to 4.7. After upgrade we will be using 4.7
transport domain for transporting changes. But users should be able to
see old Transport logs of the 4.6B transports.How this can be
implemented?
Thanks,
SamHi,
We are upgrading from 4.6B to 4.7. After upgrade we will be using 4.7
transport domain for transporting changes. But users should be able to
see old Transport logs of the 4.6B transports.How this can be
implemented?
Thanks,
Sam -
Can't printscreen after upgrade to Leopard ????
Hi everyone ! I have a problem after upgraded to Leopard and installed Vista Ultimate on my Macbook-pro 17in-2.4. I can't use printscreen key command. I don't know what's problem. Does anybody have the same this problem ? Please help me or share some information with me ! Thanks for your concerning.
I have the same problem after upgrading from boot camp beta 1.3 to boot camp 2.0 with Mac OS X v10.5 Leopard on a Macbook Pro 15 inch. I used to press fn-f11 or fn-option-f11 to capture either the screen or the current window. This has now apparently stopped working.
-
Hp P2015d can't print after upgraded to 10.5
i can't use my network printer after upgrade to 10.5 from 10.4, anyone can help??
printer is P2015dUse the Leopard dvd and do a Custom Install of the HP drivers to install the drivers. When that is done, delete the printer and re-add it using the new driver.
Hope this helps. -
I just installed 10.5.1 and now my Iphoto 08 will not import my photos from my sony cam. It worked fine on Iphoto 08 before on 10.4, it says it unread able files even when they are just JPG files. I can move them to my desktop and drag them in Iphoto and they are fine , but not from the cam?
Does your sony cam appear in iphoto as an icon when connected?
After upgrading my canon cam would not appear in iphoto. I had to quit iphoto several times, restart the computer, try several different cables, and then as mysteriously the cam finally appeared and I was able to download pics. I even trashed the iphoto plist and started afresh.
hope this helps -
RAC service can't start after upgrading to 10.2.0.4
Hi All,
After upgrading to 10.2.0.4 from 10.2.01 (linux32 with 2 nodes), I am experiencing the following:
1. The rac service (created after the database was created, not the default service) can not start after the database started with "prkp-1030" error.
2.The service somehow is online and available from the "lsnrctl status" command. Further verified that the users could connect to the rac via that service.
3. The "crs_stat -t" command and the "srvctl status service..." also show the service is not running.
Have anyone seen this problem before? what is need to be done to make it consistent.
Thanks,
TNI found something that might cause this problem.
When I shut down everything (service, db, asm, nodeapps), and start them back on one by one in the opposite order (nodeapps, asm, database). I found out that the service is somehow get restarted when I start the database (when I have yet started the service itself). the lsnrctl status shows that the service is up. but the crs_stat shows the service is down.
My question is that why the service is tied up with the database startup (using srvctl start database -d database_name)? -
Can't login after upgrade to 10.6.8
Hi
I am stuck in a login loop after upgrading from 10.6.4 to 10.6.8, the Login window accepts the password, the screen clears and after a short delay the login window reappears.
Some background info:
this is a 2010 iMac 21.5"
I have replaced a failed drive with a new one, reinstalled 10.6.4 with the install disc that came with the Mac
Did a successful Time Machine restore where the computer would boot and desktop and files were all intact.
A couple of programs complained about the OS needing updating so I used the Update feature to download and install 10.6.8
Now I cannot get past the logon screen.
Any suggestions to get past this screen?
thanks
BobHi Eric
Thanks for your continued help
I borrowed another 10.6.4 DVD and have now managed to install 10.6.4 and update it to 10.6.8 and no longer have the logon loop issue. I've also verified/repaired the disc and repaired the file permissions successfully.
Time Machine has restored the desktop, all the music files are there, Photo's are there and Google Picassa runs, but little else.
Safari complains I have the wrong version of OSX and will not run so I can't browse the net (typing this on my laptop)
iTunes reports it requires 10.7.5 or later as do most other apps I've tried.
Fortunately Finder works, I've run the Software Update and it says I have the latest updates.
If I click on 'App Store', the store opens ok but the only Upgrade option I now see is to Yosemite, if I select that the App Store screen gives a spinning pointer and never does anything, I have to force quit through finder to get out of it.
any suggestions as to what to try next?
thanks
Bob -
How can make my phone send mail after upgrading to IOS 6 yesterday? Receiving but fails to send.
http://www.apple.com/uk/support/iphone/mail/
It will be your SMTP settings that need correcting see doc above
You may have to find out the correct settings from your carrier and or
broadband supplier
Maybe you are looking for
-
As3 TypeError:#2007 Parameter text must be non-null can't fix.
I have comment box project. As3+php based project.And have #2007 Error.Try to fix but can't do anything.If can help it would be very helpful.Error part like this: TypeError: Error #2007: Parameter text must be non-null. at flash.text::TextField/set t
-
FF67 problem, can't change statement date(statement saved but not post)
I need to change the statement date of a bankstatement. I did not post the statement yet. I used a wrong statement date, and I want to change it, but I saved it after booking the second screen(the one with the statement items) When I look by Manual B
-
Is it possible to embed on a WDA a transaction screen of SAP ECC?
Hello everybody, I hope that you are very good. I have la next question: Is it possible to embed on a Web Dynpro ABAP transaction screen? For example I have the trasacción IW32, the screen shown from this transaction may Embed inside a Web Dynpro ABA
-
Dear rep I've lost all contacts from my iPhone I've backed it up but still no contacts. What can I do?
-
Converting Scratch Disk to NSTC
I need to convert my external disk from FAT to NSTC as I will be using it to edit video files and the 4gb limit on FAT is no good. Anyone know how I can do that - it was simple in Windows but now I have bought new imac I am stumped as to how to do it