Can't Login completely
When I go to login either before ordering an app or after selecting it, it leads me thru the same thing every time. I keep getting a window stating: +"This Apple ID has not yet been used with the iTunes Store.+ +Please review your account information."+ I have gone thru it several times, it states that my information and pay options have been registered. But every time I try to login, I get the same thing.
Am I doing something wrong? I have never used any of the stores for iTunes, iPod, iPad etc.
Thanks,
Glen
Since the Mac App Store is an extension of the iTunes Store you may need to go to the iTunes Store through the iTunes app and also update/complete your account information there as well.
I have had an iTunes account for years so when I used the App Store and signed in with my iTunes Apple ID everything was there and just worked.
Dah•veed
Similar Messages
-
Can't login into NW after a new patch.
Hi experts.
Yestoday I installed a new patch KB70010,after that use command SGEN to compile all source in component BASIS.This process began and said theres 2 hours left to complete.
But this morning i can't login into the system,seems the SGEN not successful or sth else.....
disp+work is in yellow status with a message: Running but not connected to Message Server.J2EE status info unavailable.
here's the developer trace.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid ER1
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 6112
Tue Jun 03 10:51:31 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 6112) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Tue Jun 03 10:51:36 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
Tue Jun 03 10:51:41 2008
ERROR => OpenProcess PID 3180 failed for checking semaphore 4
ERROR_INVALID_PARAMETER: The parameter is incorrect. [semnt.c 1892]
DpIPCInit2: start server >EXXEPT01_ER1_01 <
DpShMCreate: sizeof(wp_adm) 26752 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 073F0040, size: 4661816)
DpShMCreate: allocated sys_adm at 073F0040
DpShMCreate: allocated wp_adm at 073F1E40
DpShMCreate: allocated tm_adm_list at 073F86C0
DpShMCreate: allocated tm_adm at 073F86F0
DpShMCreate: allocated wp_ca_adm at 077C7990
DpShMCreate: allocated appc_ca_adm at 077CD750
DpShMCreate: allocated comm_adm at 077CF690
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07850550
DpShMCreate: allocated gw_adm at 07850590
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 078505C0
DpShMCreate: allocated wall_adm at 078505C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1632
argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1351
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=ER1
argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( EXXEPT01) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >EXXEPT01_ER1_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Tue Jun 03 10:52:21 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jun 03 10:52:41 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2056
argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1407
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=ER1
argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTEDI found a suspicious log dev_jcontrol, maybe it will do some help.
There's some deadlock at end....
trc file: "D:\usr\sap\ER1\DVEBMGS01\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 2612
system name : ER1
system nr. : 01
started at : Tue Jun 03 14:13:53 2008
arguments :
arg[00] : D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
arg[01] : pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=3675
arg[04] : -DSAPSYSTEM=01
arg[05] : -DSAPSYSTEMNAME=ER1
arg[06] : -DSAPMYNAME=EXXEPT01_ER1_01
arg[07] : -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
arg[08] : -DFRFC_FALLBACK=ON
arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 4756] Tue Jun 03 14:13:53 2008
[Thr 4756] *** WARNING => INFO: Unknown property [instance.box.number=ER1DVEBMGS01exxept01] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.en.host=EXXEPT01] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.en.port=3202] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties;D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties]
-> ms host : EXXEPT01
-> ms port : 3902
-> OS libs : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> files [01] : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : EXXEPT01
-> ms port : 3902
-> os libs : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID11381200 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID11381250 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID11381200 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] ID11381250 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] sdm : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
[Thr 4756] *** WARNING => JsfOpenShm: ShmCreate (69, 295952, CREATE) failed(rc = 4 SHM segment already exists) [jsfxxshm.c 715]
[Thr 4756] *** ERROR => JsfOpenShm: Shm version mismatch (shm "JSF-ADM-CORRUPT", code "JSF-ADM-015") [jsfxxshm.c 761]
[Thr 4756] *** ERROR => Can't create shared memory segment 69 (rc = 8) [jcntrxx.c 1714]
[Thr 4756] *** ERROR => Can't initialize JControl Administration [jcntrxx.c 271]
[Thr 4756] JControlCloseProgram: started (exitcode = -1)
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c 1243]
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c 1250]
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c 1257]
[Thr 4756] JControlCloseProgram: good bye... (exitcode = -1)
[Thr 3152] Tue Jun 03 14:22:52 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 14:37:56 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 14:53:01 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 15:08:05 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 15:23:09 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ? -
Missing Images and CSS when going to portal/server.pt can't login
Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
======= Diagnostic Run Complete =======
Startup completion percentage: 100% (50 steps out of 50 complete)
===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
<Files *.html>
SetHandler type-map
</Files>
SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) externalI am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps. -
Can't login to my account after upgrading to Mavericks
I have a late 2008 Macbook Pro. I have had no problems up until upgrading to Mavericks. I did a complete backup using Time Machine prior upgrading. I have a 750 GB hard disk with about 70 GB of free space. This computer has been bullet proof for 5 years now.
Anyway, I tried to upgrade to Mavericks when the OS came out but was unsuccessful at that time. It just hung up halfway through the install. I decided to just restore than to waste time figuring out what happened.
Fast forward to yesterday. I decided to give it a try again. The download and install completed without any problems. However, I can not login to my machine using my account. After entering my password, I am just getting the spinning rainbow wheel or whatever it is called. Techincally, I have two accounts, one for me and one for girlfriend. She never used hers so mine has been the only one we have ever used on the computer. That account does have admin permissions and that is also the one where I started the upgrade from.
Things I have tried so far...
1) Added another admin account to try and remove unused applications just in case old programs were no longer compatible. Btw, I can successfully log into this account. This is actually the account were I am logged into currently and using Safari to document this problem.
2) Launched File Utility. I did verify disk permissions and then repair after it completed. No luck. I also did Verify Disk but that did not return any problems.
3) I also did a reinstall of Mavericks again but the same problem still exists.
Btw, I did notice when logged in as Admin to the newly created account, that the Downloads, Desktop and Movies folder under my original user account have a little icon or stop sign next to their name when viewing through Finder. Permission problem? Even if that is the case, not sure why I would not be able to login into my original account.
Any ideas? Worst case I will restore my backup and just forget about Mavericks all together. I guess if I have nothing better to do some day in the future maybe I will do a fresh install and try to restore my personal files back. However that sounds like a lot of work.
Thanks..Try this
-
Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
The operation can't be completed because the original item ".." can't be found. Need a fix!
Ok. This is my first and hopefully only discussion ever! Thanks in advance for all the help.
I had set up my network and this was all working fine for months. Time Machine did proper back ups and I could store files on the drive as well over the network. Not sure how, or exactly when this error began. It may have had something to do with the upgrade to Mavericks.
But I can see the drive when I open Finder (which I have named Airport) can then access the directories but will not load any of the files. If the Finder window is closed and I try to access the external drive again via the network, I am prompted with.."The operation can't be completed because the original item ".(Airport)." can't be found. Also of note...there is no "eject" option beside the name of the drive.
I have found only one solution that was dated in 2008 where someone was deleting volumes from their machine and the instructions were not quite clear, so I'm hoping for some new insight on this issue. Honestly, I just didn't understand how to do what he said...several have asked him to elaborate but no further explanations and all other links are now dead. It seems this is a common issue. I'm aware many people will read this and want to say..."i Have this problem too, when im doing something with windows and other computers..." There are many solutions for these situations that I have found....but no recent ones for those with ONLY one drive and an airport extreme running only Apple computers. So guys, lets try to keep this thread for one topic only. Hopefully a quick and helpful thread with a few replies and some step by step directions to solve everyones toubles.
I even had my router replaced and still the same issue. Also, the hard drive works perfectly when hardwired to my computer. So the issue must lay within the settings of my MacBook Pro, OS X 10.9.1. If you feel I should provide any other information I would be happy to do so!Lexvo,
Thanks for the input. I had to look up what SMB stood for, server message block? So I'm assuming this is not something I'm using.
Also, this is not a "sometimes" problem. This is a consistent and reproducible issue.
As far as an update...I dont see an OS update fixing my issue unless something is overwritten, but maybe not.
I think a good point to consider and open to discussion is why does logging in as a root user solve the issue? What can be done or manipulated to allow functionality with my regular login info versus a root user? -
This is a strange one... I just recently did a complete format/reinstall of Lion because of very poor performance after upgrading.
So I'm on a totally fresh system, no TimeMachine restore or anything. I've installed all my apps from scratch - no prefrence file backups or anything. Everything is fresh.
Yesterday I tried to copy a file from one folder to another and I got the error "The operation can’t be completed because you don’t have permission to access some of the items". Checked file permissions... repaired disk permissions... made sure I was logged in as admin (I only have one account)... everything looks good.
This is now happening when trying to copy any files anywhere on my machine... Very frustrating.
There's a couple strange side-effects I've noticed:
- I can move & copy files just fine in terminal... without sudo...
- The little lock icon in the bottom right of the Get Info window doesn't do anything - I can't unlock it. I can still edit the permissions for the file/folder but I can't select the "apply to enclosed items..." option.
Does anybody know what the heck is going on?jsd2 wrote:
Try creating a new admin user account, logging into it, and then creating some new items on the Desktop and elsewhere. Does the same thing happen there?
Ok the strangeness continues!
I created a new "TestAdmin" account, but it doesn't show up in the Users & Groups prefrences sidebar... The /Users/testadmin folder was created, but the account doesn't show up in the prefrences or login window...
I tried a reboot to see if the account would show up and it still doesnt.... However after the reboot I am now able to copy files again!
I'm paranoid that the problem will show up again since I have no idea what fixed it. I tried rebooting previously after repairing permissions which didn't solve the issue so it's not like I haven't rebooted since it started.
And now I have the issue of not being able to create user accounts.
A little dissapointed with Lion to be honest... the new features are cool but there are so many little bugs it really feels half-baked. -
After upgrading from 10.7.5 to 10.8.3 I cannot copy certain folders to any external drive. the operation can't be completed because an item with the name .ds_store exists. I have seen this problem in discussions for many years with no real solution. Does anyone have a resolution? Please help. This is very frustrating as I work in two locations and copy folders back in forth all the time.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
FATAL: How can I login to my account?
My e-mail address, that I used to use as a login to my Microsoft account, doesn't exist anymore. An Internet domain has been closed about a forthnight ago and so my former e-mail address is not receiving any e-mails since then.
And I can't login to my MS account. I've tried several ways to login to the account but no success so far. I always end up in a circular reference of MS web pages which keep asking me to login. There's a chance to ask for the information to be sent do different
e-mail address, but then, after a few clicks, I'll get back to the same place where I've already been.
I also called Microsoft CZ hotline but they didn't help at all.
I'd like to know what I need to do to assign different e-mail address to an existing account.
I'm completely stuck. Please, help... ;-(Thank you for your response. I've already been there (a week ago) & I've received two emails heading me back to the circular reference on Microsoft web.
==========================================================
Email #1 (thank you for contacting us; please wait up to 24 hours; don't answer this email)
Děkujeme vám, že jste nás kontaktovali.
Obdrželi jsme žádost o obnovení vašeho účtu Microsoft, [email protected]. Číslo žádosti je:
93516983
Co bude dále?
Ověříme odpovědi, které jste zadali, a brzy se vám ozveme. Naši odpověď můžete čekat během 24 hodin. Pokud vás úspěšně ověříme jako vlastníka účtu, zašleme vám e-mail s odkazem
pro resetování hesla, abyste opět mohli používat svůj účet.
Děkujeme vám za trpělivost. Společnost Microsoft bere bezpečnost a soukromí svých zákazníků velmi vážně a součástí snahy o co nejlepší ochranu jejich osobních údajů je maximální obezřetnost
při ověřování vlastnictví účtů.
Děkujeme vám
tým podpory společnosti Microsoft
Společnost Microsoft chrání vaše osobní údaje. Další informace naleznete v
Prohlášení o zásadách ochrany osobních údajů.
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052
USA
Na tuto zprávu neodpovídejte. Odpovědi na tuto zprávu jsou směrovány do nesledované schránky.
==========================================================
Email #2
Thank you for your request. Your Microsoft account [email protected] was created using an email address from a provider other than Microsoft. To reset your password for this account, follow these steps:
1.. Click Here for the Microsoft account password reset page.
2.. Select an option and click "Reset your password".
3.. Enter your Microsoft Account, then enter the security characters, lastly click "Next".
4.. On the following page, select "Email me a reset link" and then click "Next".
5.. A reset link is now sent to your email address.
Should you require further assistance, please visit the Microsoft account Support Pages.
The account recovery request with issue number 93516983 has been closed.
Please do not reply to this message. Replies to this message are routed to an unmonitored mailbox.
Thank you,
Microsoft Support Team
==========================================================
I'm stuck. :-( -
'''"The operation can not be completed because of an internal failure. A secure network communication has not been cleaned up correctly ... '''"Iget this message when closing firefox. It obviously has been a problem in the past for others but it has only happened to me since updating to firefox6'''
Try to clear the "Active Logins" via Clear Recent History
*https://support.mozilla.com/kb/Clear+Recent+History
You can also try to delete the file secmode.db in the Firefox Profile Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder -
Websites not loading correctly/can't login to some
Websites not loading correctly/can't login
I've never used it much but I decided to try using firefox full time this week.
I installed it and loaded flash, java and anything else basic that I was asked to.
But I haven't screwed around with the settings, other than the troubleshooting steps on this site.
I'm going to use this site as an exmaple: http://www.autoitscript.com/forum/index.php?
The reason being it exhibts both of the problems below.
Problem 1 - Not loading correctly:
First here's a link to a screen shot of the problem.
http://img85.imageshack.us/img85/963/firefoxscreenshots.png
The top half is the page loaded from IE, the bottom half is Firefox.
Now when the page finishes loading in Firefox it looks exactly the same as IE for a second.
Then it changes into the image I attached.
Problem 2 - Can't log in
http://www.autoitscript.com/forum/index.php?app=core&module=global§ion=login
Now once again the login screen looks a bit different in IE and firefox.
once again it looks normal for a second in firefox.
I enter the correct username/password, and click sign in.
It comes back "you must complete both fields" and after a few seconds jumps back to the forum home page.
I had a problem registering and dealing with forums registering with mozilla.com
I would fill in the registration form hit submit and I'd just jump back to a blank form again.
I've been using IE to register and submit this question.
Thanks,
Kenny
== This happened ==
Every time Firefox opened
== As soon as I installed itCan you check your [[JavaScript]] settings and makes sure JavaScript is enabled?
It seems like some preference may have been changed that affects the way content is displayed. Another way to troubleshoot is to try creating a fresh profile, check out the article on [[Managing Profiles]] to learn how to do this.
-n. -
Can you help complete the Adobe Acrobat update installation?
The Adobe Acrobat Update Installation has been going on for hours. Can you please complete the installation?
My image is a screenshot saved to my desktop.
When the install fails, this is the message I get:
"The update could not be applied because the Adobe Reader application contents were modified since the original installation.
Please reinstall Adobe Reader and check for updates again.
Error: 1301"
When this happened once before your tech had me work with the root user on my computer.
Today I went to the Error 1301 site and followed the directions: (System Preferences, Account Login, Login Options, and Join for Network Account Server; when the Directory Utility opened, I unlocked the Directory Utility window, chose Enable Root User from the Edit menu, but couldn't accomplish the next step in the directions: "Enter the root password you wish to use in both the Password and Verify fields".
tottieirene -
Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber. I've reset my password a few times and it doesn't help. Also have shut down completely and unplugged everything to no avail.
Hey jamesarm97 & diegofoto,
On August 21st, some users may have been unable to access iCloud services for a short period of time. Apple worked quickly to resolve these issues, however you two may have experienced them. To check the current status of these systems please see:
Apple - Support - System Status
http://www.apple.com/support/systemstatus/
If either of you are still experiencing issues, you may want to troubleshoot with the following articles:
iCloud: Troubleshooting web browser issues with iCloud.com
http://support.apple.com/kb/TS4050
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Thanks,
Matt M. -
WCS error COMMON-1 after login completed
Hi Expert,
I found WCS Sytem Error Page was displayed after login completed for while. How can i fix about this? Thanks
WCS System Error Page
Error(s): You must correct following error(s) before proceeding: Error:COMMON-1: Some unexpected internal error has occured. If the problem presist please report to the Tech Support. Error:Detail: Cannot open connectionJust a heads up to anyone else that might do this... it took about 5 to 10 minutes for the 'StopWCS' process to complete.
We run Version 7.0.172.0 on a Windows Server 2003 VM.
We initially tried restarting the service from Windows Services (services.msc) - made no difference - had to run the stopWCS and startWCS programs in the installation folder.
NOTE: after launching the exe from the program files\WCSxxx\bin\ folder - it took a few moments and a Java console window appeared. It then spewed out the following over the space of 5 to 10 minutes...
"Stopping Health Monitor...
Waiting for shutdown to complete.
Health Monitor successfully shutdown.
Stopping WCS server
WCS server successfully shutdown.
Waiting for shutdown to complete.
Shutting down database server ...
Database server successfully shutdown.
Apache server is stopped.
WCS successfully shutdown."
The startup process was much quicker... taking no more than 5 minutes if that.
Again, after launching the exe from windows explorer - it took a little while for the java window to appear - it then quite quickly (compared with shutdown) produced the following output.
"Starting WCS
This may take a few minutes...
Starting Apache...
Starting Apache server ...
Apache server is running.
WCS started successfully."
And yeah - it resolved the issue for us too - many thanks. -
Can't Login to New OD Master - Even when bound to OD
This is a completely new server installation on a multi-core MacPro of Leopard Server 10.5. I have followed best practice standards by configuring DNS first and double checking with changeip command. I than went from Standalone to OD Master and all the setting checked out. I configured DHCP for our small network. That worked fine. I than configured a home directory share with automount, created one new account and created home directory. I verified login to the server and creation of the home directory. Server updates are also done now.
Now the confusing part. I took a Mac OS X Leopard client machine, fully updated and used Directory Utility to bind client to server. Directory Utility reports bind is operational and working. I can use the Directory app to see myself as a user. HOWEVER - I can NOT login to the OD Master as the user I setup. The login screen just shakes me off as if the password is wrong. It is not.
I looked at the OD logs and I am being successfully autheticated by server. The client just refuses to login. I have tried 10.4 and 10.5 clients.
What have a messed up? <grin>Hi
I'm guessing when you supply the user name and password there is a slight delay before you get the shake? is that correct? Or do you provide the user's credentials and you get the shake immediately with a message telling you the AFP or SMB Server can't be found?
To start with verify if the created user is a principal of the Kerberos Realm. On the server issue:
sudo kadmin.local -q list_principals
amongst other things you should see an entry for that user. Something like [email protected]
What you can do is to unbind. Remove the DirectoryServices folder and the edu.mit.Kerberos file from /Library/Preferences, restart the client and then place the Server's IP address in the client's DNS Server's field as well as the Domain name in the Search Domains field. Use Terminal and the host command to resolve the server's fqdn and then its IP address from the client. This will qualify the server's DNS service on the forward and reverse pointers. Use Directory Utility to bind to the Server using its IP address alone and don't bother with authenticated binding. Double-check the edu.mit.Kerberos file has been created in /Library/Preferences (this is evidence that you have received a TGT - you can refer to the server logs as well that should show this happening), log out of the local admin account and select Other. Go for the log in again and hopefully you should be now logged in with a network user's account and home folder.
Hope this helps, Tony
Maybe you are looking for
-
Any help would be greatly appreciated. I am new to Mac and am not sure how to get my camcorder to be recognized by ny Mac.
-
Macbook battery not working - computer switching off - help!
My Macbook has suddenly started switching off when the power supply is disconnected, even though the battery should be charged. This happened after buying a new macbook AC adaptor. My old 60watt adaptor has been getting quite hot, so I did a bit of r
-
The download is completed. Do I need to do something else for it to take effect?
-
No Output coming for MB1C transaction
Dear All, I have done goods movement (Movement type 521) and generated a material document number. (I have checked individual slip) Now while taking the printout of the document through Process Output, I am not able to see any document for printing.
-
Deleting old unsubscribed podcasts
Hey, I have a 60GB 5G Video Ipod and subscribe to many podcasts. I have stopped subscribing to some but for some reason the name of the podcast still appears on my ipod. There are the names of Podcasts that I have deleted along time ago but still are