Can't login to Apex (3.0.1.00.12.) - TNS-12519: TNS:no appropriate service

Hello Everyone,
I have installed Oracle Applications Release 12.1.1 (RDBMS: 11.1.0.7.0) on Oracle Enterprise Linux
(2.6.18-128.el5PAE).
I have configured Apex (3.0.1.00.12.) & EPG successful by this guide (+ metalink note).
http://www.oracle.com/technology/obe/11gr1_db/install/apexinst/apexinst.htm
https://metalink2.oracle.com/metalink/plsql/showdoc?db=NOT&id=457621.1&blackframe=1
(How to Configure Oracle Application Express (APEX) & the Embedded PL/SQL Gateway (EPG) in an 11G DB / Doc ID:
457621.1)
Unfortunately I can't access to login and admin pages.
Appreciate your help.
Best, Laszlo
Edited by: user2463324 on 2009.06.24. 5:20

Hi All,
I was on holiday last week.
Unfortunately the problem still exists.
I have checked the alert log, there is no error.
Listener seems to me ok:
"[oracle@misr12 admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 24-JUN-2009 13:12:20
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias VIS
Version TNSLSNR for Linux: Version 11.1.0.7.0 - Production
Start Date 24-JUN-2009 12:35:46
Uptime 0 days 0 hr. 36 min. 34 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/VIS/db/tech_st/11.1.0/network/admin/VIS_misr12/listener.ora
Listener Log File /opt/oracle/VIS/db/tech_st/11.1.0/log/diag/tnslsnr/misr12/vis/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=misr12.mis.zrt)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=misr12.mis.zrt)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "VIS" has 2 instance(s).
Instance "VIS", status UNKNOWN, has 1 handler(s) for this service...
Instance "VIS", status READY, has 1 handler(s) for this service...
Service "VIS_XPT" has 1 instance(s).
Instance "VIS", status READY, has 1 handler(s) for this service...
The command completed successfully"
At the moment, I'm not planning to use EBS R12 to handle the authentication for APEX, maybe later, but thank you for your info.
Do you have any idea?

Similar Messages

  • How can I login to apex using HR Schema?

    I am new to Apex. I do have logged in my own created schema but I don't know how to login in HR Schema.
    I have tried various schema names with username HR and password hr but it didn't work.
    Kindly help me in solving my problem

    Hi SK,
    Go to Application Builder->select application->shared components
    under security-> go to Authentication Scheme
    change your current scheme to database account
    Make your current scheme to Database Account
    Then try to login
    Hope this will helps you,
    Thanks,
    Jitendra

  • I can not to login to apex

    I followed I all the steps in the installation guide including post intallation but I can not login.
    This is what I see when I use:
    http://localhost:7777/pls/apex/
    the login page comes with words below:
    Using this interface the administrator can manage all aspects of the service including creating, removing, and managing workspaces.
    Application Express Administration Services
    Username
    Password
    Language: en-us
    Application Express
    Copyright © 1999, 2008, Oracle. All rights reserved.
    But I can not proceed when I use ADMIN username and Password tom123. Also the Application Express heading does not show picture or image.
    When I use the following:
    http://127.0.0.1:8080/pls/apex
    I get the page with:
    The server 127.0.0.1 at XDB requires a username and password.
    Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection).
    Username
    Password
    On supplying the right username and password, the login page fails and on the third attempt it gives the message below:
    Unauthorized
    Help
    Tom

    I found a fix to the problem. It showed up in Apex 4.0.2
    When I searched for ORA-01841 on the APEX forum, I got nothing back. When I google'd the error code, I found this answer.
    I got the answer from oracle-and-apex.com
    ""Ever got a “ORA-01841: (full) year must be between -4713 and +9999, and not be 0″ Error when trying to edit an existing user in APEX Administration Panel (Manage Workspaces > Manage Developers and Users) ?
    The reason to this error can be a too large value in Manage Instance > Security > Account Password Lifetime (days). For example you can store there a number of 999999 days which is saved without any problems, but when trying to edit an user you get the ORA-01841 error message.
    This error occurs in APEX 4.0.2.*, reported as Bug in APEX Forum.
    Thanks Pascal for showing this error to me.""
    FIX: I changed the value of 'Account Password Lifetime' to 9999 (27+ years) and everything worked fine again.
    Edited by: PhilMan2 on Jun 5, 2011 12:21 PM

  • Can not login to Oracle Application Express after upgrade to 3.2

    I installed oracle database express and then I upgrade APEX to 3.2 on it. I got the login page but I can not login by using any account, like SYS, SYSTEM. From the document, internal ADMIN account should exist but I did not see it from dba_users table.
    Thanks,
    Julie

    HI Don,
    I did run apxchpwd.sql to change the Application Express ADMIN user password. Then I invoked http://mymachine:8080/apex and got the Application Express login page. I put ADMIN in workspace and ADMIN in Username and the new password. But I still cannot login. I also tried http://mymachine:8080/apex/apex_admin page login. I typed ADMIN as username and the new password. Then I clicked on Login button. Nothing happened. No error message.
    Any idea?
    By the way, what does apxxepwd.sql do?
    Thanks,
    Julie

  • Unable to Login into APEX after upgrade from ORACLE XE to APEX 3.2

    Hi,
    I have upgraded Oracle 10g XE to with apex_3.2 on the Windows XP.
    My ORACLE XE wa in folder "C:\ORACLE XE"
    And APEX 3.2 in folder "C:\Ver 3.2\APEX"
    Once you complete the standard install, i performd the following steps to complete
    the upgrade which i got on my previous post.
    Till normal installation i was able to login in Apex link and was able to run my application which was
    in oracle XE but the only problem was i was unable to see any images in "EDIT PAGE" but my application was running well.
    then i did following steps to get those images
    Connect to SQL*Plus as SYS
    @APEX_HOME/apex/apxldimg.sql APEX_HOME
    @APEX_HOME/apex/apxxepwd.sql password
    (where password is the password of the Application Express internal ADMIN account)
    I chanbged image directory as below
    FROM:
    create directory APEX_IMAGES as ‘&1/apex/images’ ;
    TO:
    create directory APEX_IMAGES as ‘c:\oraclexe\apex\images’ and also tried ‘c:\ver 3.2\apex\images’;
    Ran @apxldimg.sql
    @apxxepwd.sql password (where password is the password of the Application Express internal ADMIN account)
    Exit from the SQL*Plus session.
    Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
    But now i am unable to login into the page itself. It "showing Page Not Found"
    Please kindly help me how to run APEX now through link.
    Thanks in advance.
    Thanks & Regards
    Sanjay
    Edited by: user11204334 on Aug 11, 2009 2:05 AM
    Edited by: user11204334 on Aug 11, 2009 4:30 AM

    Hi John,
    Thanks for reply
    I got error while doing following steps in few procedures
    Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
    Before doing the above step i was able to login into my application but without images
    Can you please help that how to check those errors and any particular procedure you know which is responsible for the Login problem.
    Thanks a Lot for help John
    Thanks & Regards
    Sanjay

  • How can I login to Oracle Express Ed 11g Rel 2 on windows XP 32bit?

    I installed Oracle Express Ed 11g Release 2 32bit on windows XP 32bit and I can not login ito it. Installation asked for a password to be created at installation which I used to login with.
    The login window is started from a shortcut that installation created on my desktop. I tried to download and install three times. I went thru a SW removable before another download. The login responds with "Invalid Login Credentials"
    I have admin rights to my PC. What could be the issue?
    Please help.
    Thanks.

    What could be the issue? Could be many different causes. Mistyping the password is one, or the database could be offline but in most cases that will give a different error message. Open a command box, Start/Run/cmd and try:
    $ sqlplus /nolog
    connect system
    ... Password ... <the one used with the installer> ... Connected.
    select name from v$database;
    login window is started from a shortcut If you're talking about the Apex page, the one that opens a web browser to http://<hostname>:8080/apex and that one needs Apex credentials, not database user credentials. Apex users can be mapped to database users but that is something done via the apex administrator.
    Two database accounts "out of the box" are SYS and SYSTEM users, those are special- SYS owns the catalog, SYSTEM is a user with dba role privileges, almost as powerful within the database as the SYS user.

  • How to automatically login to apex and run a specific page / application

    Hi all.
    I'd like to know if there is a way of automatically login to apex and run a specific page / application. I mean, invoke browser and pass the necessary information to login (not public user) and run a specific application( ina secure way if possible).
    Thanks in advance ...!

    Hi,
    Well, as a very crude test you can set your authentication scheme to be Application Express Authenticationand define some users in Apex. Then create a before header login process on the login page (101) to automatically logon containing:
    apex_authentication.login(
        p_username => :P101_USERNAME,
        p_password => :P101_PASSWORD );
    :P101_PASSWORD := NULL;conditional on P101_PASSWORD is not null.
    Then you can login by specifying your username and password in the URL e.g.
    f?p=YOURAPP:LOGIN:::::P101_USERNAME,P101_PASSWORD:username,password
    Rod West

  • CAN'T LOG IN APEX APPLICATION

    Hi, I am working with apex 3.2, when I try to login to the application it immediately shows Please contact the administrator. . I am no expert, the first thing that I check was the http on the Data Base Server, It is on maintenance state, but in other application the http service is also maintenance and the application is running, so I don't think this is the cause.
    Also check the data base schema and look at the Apex Administrator page and don't see anything wrong.
    I hope that someone can give some ideas to keep checking and find the error.
    Thanks.

    So it sounds like you can login the Apex application builder but not an application that you've built/deployed. If this is the case I would start looking at either the authentication scheme or the user account settings if your using the Apex authentication.
    Perhaps you could recreate the problem and post a screenshot somewhere of the error page that you see (you can't post images here on the forum)?
    Earl

  • Can not Login Dev or End user ID

    Hi all,
    I created a new WORKSPACE WS1 as the SUPER ADMIN.
    I then created an admin user WS1_ADMIN for this workspace (WS1).
    I also created a developer user WS1_DEV for this workspace (WS1).
    I also created a end user WS1_USER for this workspace (WS1).
    My problem is, I can login successfully using the userid "ws1_admin" , but I can not login to "ws1_dev" and "ws1_user" even if I tried changing password over and over again. It kept on saying "invalid credentials".
    Is there anything I missed out?
    Thanks
    Edited by: 843228 on May 27, 2011 1:52 AM

    Thanks,
    I have an application named ABC id 101, I developed in apex 2.0 in 10gXE database using the schema HR. I can run it on public using the id HR. Then I migrated it to APEX 4.0.2 in another database which is 11gR1. I migrated it using export/import. I imported it to my new worspace (WS1) and user "ws1_admin".
    My problem is when I run the application is still asking for the HR id.
    It will not accept the ws1_admin id in which It was imported anew, I am confused now where did it imported the old id "HR". How can I change the login id to the new ones?

  • Can not login access manager

    mail server version is JES messaging Server 6 2005Q4 :
    My Access Manager:http://hostname:8080/amserver
    last week, i login access manager, under the web label or configuration label�F
    in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
    then save configuration.
    but after that i can not login access manager.
    when i user admin login,it print:"
    Authentication failed".
    what should i do to restore access manage?
    thanks!

    javatoall wrote:
    Hi,
    I login Access Manager, access sample "realm" -> Authentication->
    Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
    Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
    When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
    When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
    When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
    Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
    >
    When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
    Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
    I want to configure access proteced resourse for that user. How to configure that ?
    read above use the authenticated users subject
    Thank for every help.
    VinhND.

  • Can't login into NW after a new patch.

    Hi experts.
    Yestoday I installed a new patch KB70010,after that use command SGEN to compile all source in component BASIS.This process began and said theres 2 hours left to complete. 
    But this morning i can't login into the system,seems the SGEN not successful or sth else.....
    disp+work is in yellow status with a message: Running but not connected to Message Server.J2EE status info unavailable.
    here's the developer trace.
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        ER1
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    75
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        6112
    Tue Jun 03 10:51:31 2008
    kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 6112) [dpxxdisp.c   1237]
         shared lib "dw_xml.dll" version 75 successfully loaded
         shared lib "dw_xtc.dll" version 75 successfully loaded
         shared lib "dw_stl.dll" version 75 successfully loaded
         shared lib "dw_gui.dll" version 75 successfully loaded
         shared lib "dw_mdm.dll" version 75 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3901
    Tue Jun 03 10:51:36 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5273]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    Tue Jun 03 10:51:41 2008
    ERROR => OpenProcess PID 3180 failed for checking semaphore 4
                  ERROR_INVALID_PARAMETER: The parameter is incorrect.  [semnt.c      1892]
    DpIPCInit2: start server >EXXEPT01_ER1_01                         <
    DpShMCreate: sizeof(wp_adm)          26752     (1408)
    DpShMCreate: sizeof(tm_adm)          3994272     (19872)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1440)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 073F0040, size: 4661816)
    DpShMCreate: allocated sys_adm at 073F0040
    DpShMCreate: allocated wp_adm at 073F1E40
    DpShMCreate: allocated tm_adm_list at 073F86C0
    DpShMCreate: allocated tm_adm at 073F86F0
    DpShMCreate: allocated wp_ca_adm at 077C7990
    DpShMCreate: allocated appc_ca_adm at 077CD750
    DpShMCreate: allocated comm_adm at 077CF690
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 07850550
    DpShMCreate: allocated gw_adm at 07850590
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 078505C0
    DpShMCreate: allocated wall_adm at 078505C8
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 511 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 1632
      argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1351
      argv[5] = -DSAPSYSTEM=01
      argv[6] = -DSAPSYSTEMNAME=ER1
      argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
      argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
    ***LOG Q0K=> DpMsAttach, mscon ( EXXEPT01) [dpxxdisp.c   11586]
    DpStartStopMsg: send start message (myname is >EXXEPT01_ER1_01                         <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 75
    Release check o.K.
    Tue Jun 03 10:52:21 2008
    DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
    Tue Jun 03 10:52:41 2008
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 2056
      argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
      argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1407
      argv[5] = -DSAPSYSTEM=01
      argv[6] = -DSAPSYSTEMNAME=ER1
      argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
      argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED

    I found a suspicious log   dev_jcontrol,  maybe it will do some help.
    There's some deadlock at end....
    trc file: "D:\usr\sap\ER1\DVEBMGS01\work\dev_jcontrol", trc level: 1, release: "700"
    node name   : jcontrol
    pid         : 2612
    system name : ER1
    system nr.  : 01
    started at  : Tue Jun 03 14:13:53 2008
    arguments       :
           arg[00] : D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
           arg[01] : pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
           arg[02] : -DSAPSTART=1
           arg[03] : -DCONNECT_PORT=3675
           arg[04] : -DSAPSYSTEM=01
           arg[05] : -DSAPSYSTEMNAME=ER1
           arg[06] : -DSAPMYNAME=EXXEPT01_ER1_01
           arg[07] : -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
           arg[08] : -DFRFC_FALLBACK=ON
           arg[09] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 4756] Tue Jun 03 14:13:53 2008
    [Thr 4756] *** WARNING => INFO: Unknown property [instance.box.number=ER1DVEBMGS01exxept01] [jstartxx.c   841]
    [Thr 4756] *** WARNING => INFO: Unknown property [instance.en.host=EXXEPT01] [jstartxx.c   841]
    [Thr 4756] *** WARNING => INFO: Unknown property [instance.en.port=3202] [jstartxx.c   841]
    [Thr 4756] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties;D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties]
    -> ms host    : EXXEPT01
    -> ms port    : 3902
    -> OS libs    : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
    -> files [01] : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
    Instance properties
    -> ms host    : EXXEPT01
    -> ms port    : 3902
    -> os libs    : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID11381200 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID11381250 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID11381200           : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID11381250           : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] sdm                  : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
    [Thr 4756] *** WARNING => JsfOpenShm: ShmCreate (69, 295952, CREATE) failed(rc = 4 SHM segment already exists) [jsfxxshm.c   715]
    [Thr 4756] *** ERROR => JsfOpenShm: Shm version mismatch (shm "JSF-ADM-CORRUPT", code "JSF-ADM-015") [jsfxxshm.c   761]
    [Thr 4756] *** ERROR => Can't create shared memory segment 69 (rc = 8) [jcntrxx.c    1714]
    [Thr 4756] *** ERROR => Can't initialize JControl Administration [jcntrxx.c    271]
    [Thr 4756] JControlCloseProgram: started (exitcode = -1)
    [Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c   1243]
    [Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c   1250]
    [Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c   1257]
    [Thr 4756] JControlCloseProgram: good bye... (exitcode = -1)
                                                                                    [Thr 3152] Tue Jun 03 14:22:52 2008
    [Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
    [Thr 3152] Tue Jun 03 14:37:56 2008
    [Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
    [Thr 3152] Tue Jun 03 14:53:01 2008
    [Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
    [Thr 3152] Tue Jun 03 15:08:05 2008
    [Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
    [Thr 3152] Tue Jun 03 15:23:09 2008
    [Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?

  • Missing Images and CSS when going to portal/server.pt can't login

    Hi,
    I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
    Task #1 (InitPortalObjects) END (OK)
    Task #2 (CheckDevKit) END (OK)
    Task #3 (InitializePaths) END (OK)
    Task #4 (InitializeApplication) END (OK)
    Task #5 (InitializeAppWarmUpHelper) END (OK)
    Task #6 (InitializeImageServerHelper) END (OK)
    Task #7 (InitializeConfigHelper) END (OK)
    Task #8 (InitializeResourceManager) END (OK)
    Task #9 (LoadVersionHelper) END (OK)
    Task #10 (InitializeActivitySpaces) END (OK)
    Task #11 (InitializeVarPacks) END (OK)
    Task #12 (InitializeImageServerHelperPartII) END (OK)
    Task #13 (InitializeObjects) END (OK)
    Task #14 (LoadCustomLoads) END (OK)
    Task #15 (CheckDBVersion) END (OK)
    Aqualogic Interaction startup successful.
        ======= Diagnostic Run Complete =======
        Startup completion percentage: 100% (50 steps out of 50 complete)
        ===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
    Include "C:/bea/alui/plumtreeconf/"
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned. 
    # The configuration directives are grouped into three basic sections:
    #  1. Directives that control the operation of the Apache server process as a
    #     whole (the 'global environment').
    #  2. Directives that define the parameters of the 'main' or 'default' server,
    #     which responds to requests that aren't handled by a virtual host.
    #     These directives also provide default values for the settings
    #     of all virtual hosts.
    #  3. Settings for virtual hosts, which allow Web requests to be sent to
    #     different IP addresses or hostnames and have them handled by the
    #     same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
    # server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which Apache.exe is located
    # will be used by default.  It is recommended that you always supply
    # an explicit drive letter in absolute paths, however, to avoid
    # confusion.
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # NOTE!  If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation (available
    # at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
    # you will save yourself a lot of trouble.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "C:/Program Files/Apache Group/Apache2"
    # ScoreBoardFile: File used to store internal server process information.
    # If unspecified (the default), the scoreboard will be stored in an
    # anonymous shared memory segment, and will be unavailable to third-party
    # applications.
    # If specified, ensure that no two invocations of Apache share the same
    # scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
    #ScoreBoardFile logs/apache_runtime_status
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile logs/httpd.pid
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    ## Server-Pool Size Regulation (MPM specific)
    # WinNT MPM
    # ThreadsPerChild: constant number of worker threads in the server process
    # MaxRequestsPerChild: maximum  number of requests a server process serves
    <IfModule mpm_winnt.c>
    ThreadsPerChild 250
    MaxRequestsPerChild  0
    </IfModule>
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
    #Listen 12.34.56.78:80
    # Listen 80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule access_module modules/mod_access.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule auth_module modules/mod_auth.so
    #LoadModule auth_anon_module modules/mod_auth_anon.so
    #LoadModule auth_dbm_module modules/mod_auth_dbm.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule cgi_module modules/mod_cgi.so
    #LoadModule dav_module modules/mod_dav.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule env_module modules/mod_env.so
    #LoadModule expires_module modules/mod_expires.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule headers_module modules/mod_headers.so
    LoadModule imap_module modules/mod_imap.so
    LoadModule include_module modules/mod_include.so
    #LoadModule info_module modules/mod_info.so
    LoadModule isapi_module modules/mod_isapi.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    #LoadModule proxy_http_module modules/mod_proxy_http.so
    #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule negotiation_module modules/mod_negotiation.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule setenvif_module modules/mod_setenvif.so
    #LoadModule speling_module modules/mod_speling.so
    #LoadModule status_module modules/mod_status.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule userdir_module modules/mod_userdir.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    #LoadModule ssl_module modules/mod_ssl.so
    LoadModule weblogic_module modules/mod_wl_20.so
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.  e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If this is not set to valid DNS name for your host, server-generated
    # redirections will not work.  See also the UseCanonicalName directive.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address anyway, and this will make
    # redirections work in a sensible way.
    ServerName localhost:80
    # UseCanonicalName: Determines how Apache constructs self-referencing
    # URLs and the SERVER_NAME and SERVER_PORT variables.
    # When set "Off", Apache will use the Hostname and Port supplied
    # by the client.  When set "On", Apache will use the value of the
    # ServerName directive.
    UseCanonicalName Off
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features. 
    <Directory />
        Options FollowSymLinks
        AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "C:/Program Files/Apache Group/Apache2/htdocs">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.0/mod/core.html#options
    # for more information.
        Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
        AllowOverride None
    # Controls who can get stuff from this server.
        Order allow,deny
        Allow from all
    </Directory>
    # UserDir: The name of the directory that is appended onto a user's home
    # directory if a ~user request is received.  Be especially careful to use
    # proper, forward slashes here.  On Windows NT, "Personal/My Website"
    # is a more appropriate choice.
    UserDir "My Documents/My Website"
    # Control access to UserDir directories.  The following is an example
    # for a site where these directories are restricted to read-only.
    # You must correct the path for the root to match your system's configured
    # user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
    # or whichever, as appropriate.
    #<Directory "C:/Documents and Settings/*/My Documents/My Website">
    #    AllowOverride FileInfo AuthConfig Limit
    #    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    #    <Limit GET POST OPTIONS PROPFIND>
    #        Order allow,deny
    #        Allow from all
    #    </Limit>
    #    <LimitExcept GET POST OPTIONS PROPFIND>
    #        Order deny,allow
    #        Deny from all
    #    </LimitExcept>
    #</Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    # The index.html.var file (a type-map) is used to deliver content-
    # negotiated documents.  The MultiViews Option can be used for the
    # same purpose, but it is much slower.
    DirectoryIndex index.html index.html.var
    # AccessFileName: The name of the file to look for in each directory
    # for additional configuration directives.  See also the AllowOverride
    # directive.
    AccessFileName .htaccess
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
        Order allow,deny
        Deny from all
    </FilesMatch>
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    TypesConfig conf/mime.types
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value.  If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    <IfModule mod_mime_magic.c>
        MIMEMagicFile conf/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # EnableMMAP: Control whether memory-mapping is used to deliver
    # files (assuming that the underlying OS supports it).
    # The default is on; turn this off if you serve from NFS-mounted
    # filesystems.  On some systems, turning it off (regardless of
    # filesystem) can improve performance; for details, please see
    # http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
    #EnableMMAP off
    # EnableSendfile: Control whether the sendfile kernel support is
    # used  to deliver files (assuming that the OS supports it).
    # The default is on; turn this off if you serve from NFS-mounted
    # filesystems.  Please see
    # http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
    #EnableSendfile off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog logs/error.log
    # LogLevel: Control the number of messages logged to the error.log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # You need to enable mod_logio.c to use %I and %O
    #LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog logs/access.log common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog logs/referer.log referer
    #CustomLog logs/agent.log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog logs/access.log combined
    # ServerTokens
    # This directive configures what you return as the Server HTTP response
    # Header. The default is 'Full' which sends information about the OS-Type
    # and compiled in modules.
    # Set to one of:  Full | OS | Minor | Minimal | Major | Prod
    # where Full conveys the most information, and Prod the least.
    ServerTokens Full
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (internal error documents, FTP directory
    # listings, mod_status and mod_info output etc., but not CGI generated
    # documents or custom error documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of:  On | Off | EMail
    ServerSignature On
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL.  So "/icons" isn't aliased in this
    # example, only "/icons/".  If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    # We include the /icons/ alias for FancyIndexed directory listings.  If you
    # do not use FancyIndexing, you may comment this out.
    Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
    <Directory "C:/Program Files/Apache Group/Apache2/icons">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>
    # This should be changed to the ServerRoot/manual/.  The alias provides
    # the manual, even if you choose to move your DocumentRoot.  You may comment
    # this out if you do not care for the documentation.
    AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
    <Directory "C:/Program Files/Apache Group/Apache2/manual">
        Options Indexes
        AllowOverride None
        Order allow,deny
        Allow from all
        <Files *.html>
            SetHandler type-map
        </Files>
        SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
        RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
    </Directory>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
    # "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
        AllowOverride None
        Options None
        Order allow,deny
        Allow from all
    </Directory>
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Directives controlling the display of server-generated directory listings.
    # IndexOptions: Controls the appearance of server-generated directory
    # listings.
    IndexOptions FancyIndexing VersionSort
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions.  These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes.  These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    ReadmeName README.html
    HeaderName HEADER.html
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing.  Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    # DefaultLanguage and AddLanguage allows you to specify the language of
    # a document. You can then use content negotiation to give a browser a
    # file in a language the user can understand.
    # Specify a default language. This means that all data
    # going out without a specific language tag (see below) will
    # be marked with this one. You probably do NOT want to set
    # this unless you are sure it is correct for all cases.
    # * It is generally better to not mark a page as
    # * being a certain language than marking it with the wrong
    # * language!
    # DefaultLanguage nl
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in some cases
    # the two character 'Language' abbreviation is not identical to
    # the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. There is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
    # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
    # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
    # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
    # Norwegian (no) - Polish (pl) - Portugese (pt)
    # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
    # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
    AddLanguage ca .ca
    AddLanguage cs .cz .cs
    AddLanguage da .dk
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage en .en
    AddLanguage eo .eo
    AddLanguage es .es
    AddLanguage et .et
    AddLanguage fr .fr
    AddLanguage he .he
    AddLanguage hr .hr
    AddLanguage it .it
    AddLanguage ja .ja
    AddLanguage ko .ko
    AddLanguage ltz .ltz
    AddLanguage nl .nl
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddLanguage pt .pt
    AddLanguage pt-BR .pt-br
    AddLanguage ru .ru
    AddLanguage sv .sv
    AddLanguage zh-CN .zh-cn
    AddLanguage zh-TW .zh-tw
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
    # ForceLanguagePriority allows you to serve a result page rather than
    # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
    # [in case no accepted languages matched the available variants]
    ForceLanguagePriority Prefer Fallback
    # Commonly used filename extensions to character sets. You probably
    # want to avoid clashes with the language extensions, unless you
    # are good at carefully testing your setup after each change.
    # See http://www.iana.org/assignments/character-sets for the
    # official list of        .utf7
    AddCharset utf-8       .utf8
    AddCharset big5        .big5 .b5
    AddCharset EUC-TW      .euc-tw
    AddCharset EUC-JP      .euc-jp
    AddCharset EUC-KR      .euc-kr
    AddCharset shift_jis   .sjis
    # AddType allows you to add to or override the MIME configuration
    # file mime.types for specific file types.
    #AddType application/x-tar .tgz
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis
    # For server-parsed imagemap files:
    #AddHandler imap-file map
    # For type maps (negotiated resources):
    # (This is enabled by default to allow the Apache "It Worked" page
    #  to be distributed in multiple languages.)
    AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

    I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
    As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
    If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
    To confirm whether this is done right, check the following:
    1. Acces 'http://<server ip / server name / localhost >/' from your browser
    This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
    2. Access 'http://<server ip>/imageserver/' from your browser
    This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
    3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
    Hope this helps.

  • How can I login with my admin user after the "file vault-security option" disabled?

    My HD was full. So i deleted the biggest files related to file vault. After that i disabled the file vault option in security preferences, and restarted the machine. When i tried to connect again, appear the message"error in file vault". How can i fix?

    I have the same problem.  My Mac Mini server will not let me reset pram or safemode.  Can't login.  Help

  • Apple tv 2 problem: I can not login with my ID account!!!!!

    apple tv does not login with my ID! Do you have a solution? Since a few weeks I can not login in with my password...
    I tried everything:
    - re-starting apple tv.
    - login on macbook with my apple ID with new password

    Signal Strengh on WiFi was great (its a new Apple Time Capsule and has to be reset often).  Checked the internet connectivity on other machines too (incase that was inop).   I checked the network first as that is typically a impediment to all other things working prior to my previous comment.  I logged in to iTunes and MobleMe to see that my password was correct and working.  hmmm.
    I reset the Apple TV next and again changed my iTunes password on my laptop, then ran a network test (which needs a itunes password to work).  Network check was successful and I am logged back in.
    Now it says...."Netflix is currently unavailable. Try again later".
    geez.

  • I can't login into my  macbook pro under my user , only as a guest.

    My MacBook pro is taking forever to load. I can't login using my user name, but only as guest. When I finally make it into Guest User, it takes forever to load anything and everything. I want to know if I can still retrieve my pictures. I tried going thru iPhoto under guest user and importing the pictures. However, a red exit sign appears on all the files under that username. Please help  ;(

    Hi rosaqt,
    I see that you are having some issues with your ability to log in to your user account on your computer. If this issue is related to passwords, you will want to see the information in the following article:
    OS X Mavericks: If you forget your login password
    http://support.apple.com/kb/PH14120
    However, if this issue is unrelated to your password for your user account, you may need to provide more information in order for me to properly assist you. In the mean time, you may wish to boot into Safe Mode to see if that affects your ability to log in to your user account:
    OS X: What is Safe Boot, Safe Mode? - Apple Support
    http://support.apple.com/en-us/HT201262
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for