Can't login to ConnectNow, meeting url seems incorrect, why?
Hi there,
sorry for posting this problem. Perhaps because my English is not the best, I haven't found the problem by searching the forum.
Ok, I can´t use ConnectNow at the moment, never was able to use. I like to show it a few collegues next week.
I do have an Adobe-ID, login to Acrobat.com (e.g. für sharing files) works great. But if I try to login to ConnectNow, the browser is forwarded to my meeting url. On this page, something like: "The meeing url isn´t correct. If you want to reserve it, get a Adobe-ID ..."
What´s wrong here?
I have tried it with different browsers, computers and Os´s. (FF, Safari, OS X 10.5, Win XP with Parallels) And I tried to login in the menu of Acrobat and InDesign, doesn´t work!
Can someone help me, please?
Thank you very much, I like to use this great tool, too!
Martin
Hi there,
sorry for posting this problem. Perhaps because my English is not the best, I haven't found the problem by searching the forum.
Ok, I can´t use ConnectNow at the moment, never was able to use. I like to show it a few collegues next week.
I do have an Adobe-ID, login to Acrobat.com (e.g. für sharing files) works great. But if I try to login to ConnectNow, the browser is forwarded to my meeting url. On this page, something like: "The meeing url isn´t correct. If you want to reserve it, get a Adobe-ID ..."
What´s wrong here?
I have tried it with different browsers, computers and Os´s. (FF, Safari, OS X 10.5, Win XP with Parallels) And I tried to login in the menu of Acrobat and InDesign, doesn´t work!
Can someone help me, please?
Thank you very much, I like to use this great tool, too!
Martin
Similar Messages
-
How can I get the Lync Meeting URL programmatically in C#?
Currently I am running an ASP.NET web application and my web page needs to provide a button to get the Lync Meeting URL just like the Outlook does:
Please see the screenshot here: Lync
Meeting Address in Outlook
The behavior of this button is when it is clicked, the Lync Meeting URL is retrieved (maybe from the Exchange server) and is shown on a asp:Label control on the web page.
I googled but I have been told that there are three SDKs can be considered for this scenario:
Lync SDK - seems the Lync client must be running while the SDK is in use
Microsoft Unified Communications Managed API (UCMA)
Microsoft Exchange Web Services (EWS)
I am really confused on these three SDKs, and don't know how to achieve my goal by utilizing these SDKs, could someone please help me? It would be much appreciate if you can post some sample code here.Hi,
You'll receive a better response posting this thread in the Lync Development forums here;
https://social.msdn.microsoft.com/Forums/office/en-US/home?category=lync
The majority of readers here typically are end users, administrators, consultants, architects, or enthusiasts.
Kind regards
Ben
Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems or queries.
Lync | Skype | Blog: Gecko-Studio -
My MacBook Pro Can't Login to iMessage. What seems to be the problem?
Hi!
I'm having trouble signing in with iMessage using my Macbook Pro.
I'm using:
Software OS X 10.8.2 (12C60
13-inch, Early 2011
I know I have to sign in using my Apple ID, but everytime I do, it keeps asking for my password. My password is consistent with my other devices, but whenever I enter it here, it gets an error.
Can you help me please?
Thanks!Most of the sites you mentioned will not let you block ALL their cookies and still log you in.
You could also be having a certificates problem, but I am no expert at those issues. -
Hi, after i changes my Aple id password, i can't uppdate mBox Mail app i bougth from App store, when i try to uppdate the app, the message " can't login in to ituns" cames upp. Why can't i not uppdate the App since i changes my password?
Hello there, Aruna Patel.
The following Knowledge Base article should provide the information you need to help resolve your issue:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I can't login because my account has been locked
Good morning! I used my account more than 3 years.And i have lots of apps and musics on my account I'm of your company I have iPhone iPad and iPod. And today, i can't sign in to my account. When i sign in to my account, I have message: "you can not login because your account has been locked" Why i can't connect my account? I have just back to my home durning the vacation. And my friend used my computer.My apple ID:**************@gmail.com
please help me as soon as you can thank you so muchFor info we are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your iOS device by tapping on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and then log back in so as to 'refresh' the account on them.
If that doesn't fix it then contact iTunes Support and see if they can/will unlock it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
Hello
SCN isn't allowing me to login (SSO) using some URLs, but it is others.
For example I can login using http://scn.sap.com/welcome
but I can't login using http://wiki.scn.sap.com/wiki/display/BOBJ/Business+Intelligence?original_fqdn=wiki.sdn.sap.com
I don't think its a client side issue. Can you help please?
Thanks
MatthewHi, I have the same issue with this link:
http://wiki.scn.sap.com/wiki/display/mobile/Mobile+ITS+for+Beginners+with+steps
(It's seems like a loop between access the wiki and logon) -
Can't login into NW after a new patch.
Hi experts.
Yestoday I installed a new patch KB70010,after that use command SGEN to compile all source in component BASIS.This process began and said theres 2 hours left to complete.
But this morning i can't login into the system,seems the SGEN not successful or sth else.....
disp+work is in yellow status with a message: Running but not connected to Message Server.J2EE status info unavailable.
here's the developer trace.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid ER1
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 6112
Tue Jun 03 10:51:31 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 6112) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Tue Jun 03 10:51:36 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
Tue Jun 03 10:51:41 2008
ERROR => OpenProcess PID 3180 failed for checking semaphore 4
ERROR_INVALID_PARAMETER: The parameter is incorrect. [semnt.c 1892]
DpIPCInit2: start server >EXXEPT01_ER1_01 <
DpShMCreate: sizeof(wp_adm) 26752 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 073F0040, size: 4661816)
DpShMCreate: allocated sys_adm at 073F0040
DpShMCreate: allocated wp_adm at 073F1E40
DpShMCreate: allocated tm_adm_list at 073F86C0
DpShMCreate: allocated tm_adm at 073F86F0
DpShMCreate: allocated wp_ca_adm at 077C7990
DpShMCreate: allocated appc_ca_adm at 077CD750
DpShMCreate: allocated comm_adm at 077CF690
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07850550
DpShMCreate: allocated gw_adm at 07850590
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 078505C0
DpShMCreate: allocated wall_adm at 078505C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1632
argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1351
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=ER1
argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( EXXEPT01) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >EXXEPT01_ER1_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Tue Jun 03 10:52:21 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jun 03 10:52:41 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2056
argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1407
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=ER1
argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTEDI found a suspicious log dev_jcontrol, maybe it will do some help.
There's some deadlock at end....
trc file: "D:\usr\sap\ER1\DVEBMGS01\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 2612
system name : ER1
system nr. : 01
started at : Tue Jun 03 14:13:53 2008
arguments :
arg[00] : D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
arg[01] : pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=3675
arg[04] : -DSAPSYSTEM=01
arg[05] : -DSAPSYSTEMNAME=ER1
arg[06] : -DSAPMYNAME=EXXEPT01_ER1_01
arg[07] : -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
arg[08] : -DFRFC_FALLBACK=ON
arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 4756] Tue Jun 03 14:13:53 2008
[Thr 4756] *** WARNING => INFO: Unknown property [instance.box.number=ER1DVEBMGS01exxept01] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.en.host=EXXEPT01] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.en.port=3202] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties;D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties]
-> ms host : EXXEPT01
-> ms port : 3902
-> OS libs : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> files [01] : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : EXXEPT01
-> ms port : 3902
-> os libs : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID11381200 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID11381250 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID11381200 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] ID11381250 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] sdm : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
[Thr 4756] *** WARNING => JsfOpenShm: ShmCreate (69, 295952, CREATE) failed(rc = 4 SHM segment already exists) [jsfxxshm.c 715]
[Thr 4756] *** ERROR => JsfOpenShm: Shm version mismatch (shm "JSF-ADM-CORRUPT", code "JSF-ADM-015") [jsfxxshm.c 761]
[Thr 4756] *** ERROR => Can't create shared memory segment 69 (rc = 8) [jcntrxx.c 1714]
[Thr 4756] *** ERROR => Can't initialize JControl Administration [jcntrxx.c 271]
[Thr 4756] JControlCloseProgram: started (exitcode = -1)
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c 1243]
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c 1250]
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c 1257]
[Thr 4756] JControlCloseProgram: good bye... (exitcode = -1)
[Thr 3152] Tue Jun 03 14:22:52 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 14:37:56 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 14:53:01 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 15:08:05 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 15:23:09 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ? -
User Login - go to previous URL not working
Hi
I have a user login set up using the DW server behaviour.
The problem I have is that the redirect to the previous url doesnt work and always directs a successful login to the default successful login page.
The problem seems to revolve around this part of the code:
if (isset($_SESSION['PrevUrl']) && FALSE) {
$MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
header("Location: " . $MM_redirectLoginSuccess);
and in particular the use of the && FALSE check. I can see from my debugger that the value of $_SESSION['PrevUrl'] is properly set to the previous url. If I remove the && FALSE check the login works as I would expect and redirects to the previous URL. However, as this is 'out of the box' DW code I am concerned in case removing the && FALSE check may be doing some harm. I have to admit I dont understand the logic of what the && FALSE part of the IF statement is actually checking for.
Any advice and/or reassurance that by removing the && FALSE is not doing any harm or exposing me to any risks would be appreciated.
Thankssession_start() is set
As I step through the code and watch the variables I can see that the value of $_SESSION['PrevUrl'] is equal to the previous url but $MM_redirectLoginSuccess remains as the default success page.
If I remove the && FALSE element from the IF statement, the value of MM_redirectLoginSuccess is changed to the the value of $_SESSION['PrevUrl'], which is what I want.
So my question is, what is the && FALSE bit doing and why is it there and do I need it? -
Cisco IPS 4260 Can't login to IDM after upgrade to 7.1(9)
Hi,
I recently upgraded my 4260 sensor to 7.1(9). Before the upgrade, I could log-in to the sensors via the IDM (JNLP). Now after the upgrade, the IDM prompt comes up but when I enter my username and password, I get a pop saying "Unable to launch device manager from https://[x.x.x.x]"
On viewing the detailed logs, I get java.net.MalformedURLException: Invalid host: [x.x.x.x]. The same error is repeated multiple times.
I also get messages like "Trying for IDM. url=https://[x.x.x.x]/idm/idm.jnlp/
To me it seems that the program is unnecessarily adding the "[ ]" to the host and this is causing the url to fail.
I have downloaded a fresh copy of jnlp file from the updated sensor. My java version is 7Update51. This version worked correctly with the idm.jnlp supplied with the previous sensor update 7.1(8).
Cisco IME 7.2.3 can correctly connect to the sensor and I can also login via SSH using the same username and password.
Has anyone faced a similar issue? Is there a solution?
ThanksHave you solved your problem? I think I have the same issue.
-
Can't login to the Collaborate C-Hub Administration Console
What's the user name and password for the Collaborate C-Hub Administrator console?
I successfully intstalled the RosettaNet version of Collaborate with the Coludscape
database on an NT. The verification also succeded. But after starting the server
with C-Hub configuration (from the start-menu) I can't login! What is the correct
login and password when I havn't changed anything?
I can't start the WebLogic Server console with the C-Hub server configuration.
There is nothing at that URL (http://localhost:7001/console).
I can start the WebLogic server console with the ordinary default server and login
as the "system" user. But then I don't have any configuration for the C-Hub!
Have I missed something here, or is the Colloaborate installation description
truncated?
It seems to me that I have to install the C-Hub administration console as a web
application in the server I can login to with the Administrator console. If so,
why doesn't the installation guide tells me that?
(By the way, the URL's the installation created in the start-meny contains an
invalid hostname. It should be "localhost" or my machine name. For some reason,
my company name was used instead.)Thanks for the login, I will try it!
I got the C-Hub and C-Enabler running, but not the administrators console (in
those servers). There is sufficient configuration information in this document
at the BEA site:
http://edocs.bea.com/wlcollab/v1_0_1/interm/setup.htm
The login: bea, and password: 12345678 given there worked.
I havn't yet been able to use the administrators console to configure the servers
in the Collaborate hub and enabler directories. (To do that I belive the adminitration
console must first be added as an application in those servers.)
I got the C-Hub and C-enabler working by directly editing the configuration in
hub/config/mydomain/config.xml resp. enabler/config/mydomain/config.xml and running
the two servers separatly.
"Jeff Ogorek" <[email protected]> wrote:
>
UserId: admin
Password: myadmin
I'd be curious to get an answer to your question regarding how to administor
the
Weblogic Server that the Hub is running on. Let me know if what you
find out.
"Lars Nyström" <[email protected]> wrote:
What's the user name and password for the Collaborate C-Hub Administrator
console?
I successfully intstalled the RosettaNet version of Collaborate withthe
Coludscape
database on an NT. The verification also succeded. But after startingthe
server
with C-Hub configuration (from the start-menu) I can't login! What isthe
correct
login and password when I havn't changed anything?
I can't start the WebLogic Server console with the C-Hub server configuration.
There is nothing at that URL (http://localhost:7001/console).
I can start the WebLogic server console with the ordinary default server
and login
as the "system" user. But then I don't have any configuration for theC-Hub!
Have I missed something here, or is the Colloaborate installation description
truncated?
It seems to me that I have to install the C-Hub administration consoleas
a web
application in the server I can login to with the Administrator console.
If so,
why doesn't the installation guide tells me that?
(By the way, the URL's the installation created in the start-meny contains
an
invalid hostname. It should be "localhost" or my machine name. For some
reason,
my company name was used instead.) -
Can´t login to Facebook on Safari
Hi there. Have this annoying problem, i can't login to Facebook on safari.
It charges the start page but when i click on login it takes me to the start again, no warnings or anything...
It only happens on safari, other browers work fine.
Any suggestions?
I've erased cache, cookies, restarted my mac, nothig seems to work...
Hel pleaaaase!!
Thanks!Hi,
From your Safari menu bar click Safari / Preferences then select the Autofill tab. Click the Edit button next to: User names and passwords.
Delete the Facebook url.
Quit Safari. Open Keychain Access (Applications/Utilities) Select Passwords on the left.
Delete the Facebook keychain.
Relaunch Safari. Try logging into FB again. If you still have problems, go back to Keychain Access and delete the "Safari Forums Autofill" keychain.
Relaunch Safari and try again.
Carolyn -
Troubleshooting: Retrieving Meeting URL in Connect?
I've built an external application interface for a client regarding their specialized usage of connect. Overall it's pretty straightforward, and we've been running it fairly successfully this week, but I'm running into some fringe cases where a user has booked a session, goes to their session list (all on our side at this point) and upon requesting the meeting room url, they get access denied and no url returned.
When this happens, I have a log dump of exactly what I'm doing which is as follows:
LOG: >>
0: 1309025662: AC Obj Initialized
1: 1309025662: AC_URL: http://fake.connectserver.ca:8080
2: 1309025662: AC_USER: [email protected]
3: 1309025662: AC_PASS: fakepass
4: 1309025662: RECUR_SCOID: 20700
5: 1309025662: SINGLE_SCOID: 20602
6: 1309025662: Setting Username: [email protected]
7: 1309025662: Setting Password: dcb2221be7ced3309064b48fd8fb65f
8: 1309025662: Attempting Admin Login...
9: 1309025663: adminLogin success (breezqgvfvqffyqexcssd): [email protected]
10: 1309025663: Checking if user ([email protected]) exists...
11: 1309025663: User confirmed ([email protected]:22510)
12: 1309025663: Getting folder meetings for recurring sessions...
13: 1309025664: Getting folder meetings for single sessions...
14: 1309025664: Attempting Admin Logout...
15: 1309025664: log out success: breezqgvfvqffyqexcssd
16: 1309025664: Attempting User Login...
17: 1309025664: login success (breez86hovxz4673n7kkm): [email protected]
18: 1309025664: Getting meeting sco_id
19: 1309025664: Meeting sco_id returned: 21270
20: 1309025664: Getting meeting url
21: 1309025665: Url Returned:
22: 1309025665: Final Url: http://fake.connectserver.ca:8080?session=breez86hovxz4673n7kkm
Obviously it's not getting the Url. When this occurs I also automatically log a dump of the xml of the request which looks as follows:
0: >>
tag: results
type: open
level: 1
1: >>
tag: status
type: complete
level: 2
ATTRIBUTES: >>
code: no-access
subcode: denied
2: >>
tag: results
type: close
level: 1
I've looked into the Adobe Connect documentation regarding this, and it doesn't really have a lot to say, it just says the following about no-access and denied.
no-access: Indicates that you don’t have permission to call the action. The subcode attribute provides more details.
denied: Based on the supplied credentials, you don’t have permission to call the action.
Based on this I logged directly into the Adobe Connect interface, and checked the meeting out. Everything was set up properly. The users that weren't able to return the URL existed as participants in the sco-id they were attempting to return the url from. All permissions looked correct, all users looked correct. And what is throwing me off is this seems to be a strange random small occurence for certain users. All of the other users have been using the new interface we've built successfully etc.
Personally we haven't been able to replicate this behavior in our test environment, but it's definitely something that has happened two or three times now in the past week.
Anybody have any ideas on how I might troubleshoot this? I'm assuming there's some key information I'm not getting that would help me solve this, but right now I'm sort of stumped.
Thanks.I might be able to help but I will have to see your code. I take it that you are using Flashbuilder or Flex?
If you are still batteling with the code let me know. -
Hi, since the end of last week I can't login with Opera. I just get 500 internal server error.
Login with FF works, but FF doesn't remember forum password (and I know others have the same problem). Could you please fix that rather that opera login :-)Try this (from a post i made a while ago):
To log in easily, go to the login page, view source, and look for the following INPUT field: site2pstoretoken
Then, construct a URL as follows: https://login.oracle.com/sso/auth?site2pstoretoken=<site2pstoretoken>&ssousername=<login email>&password=<password>
In FF, not in IE, it seems that old tokens work. So, after logging out the old token can be used: https://login.oracle.com/sso/auth?site2pstoretoken=<site2pstoretoken> -
Lync 2013 Hosting pack tenant meet url returns 404
Hi all,
I have a 2 problems in the Hosting pack:
1. Meet urls are correctly generated for tenants (IE https://meet.hoster.com/tenantdomain/user/confID) but they return a 404 when browsing to the meeting from a browser
2. Office web apps presentations just never work. It just says that it cannot connect to the presentation server.
For problem 1, what I tried was:
1. Set Set-Cssimpleconfiguration -UseBackendDatabase $True -Tenant <TenantID>
2. Tried repairing the IIS Rewrite module as per http://social.technet.microsoft.com/Forums/lync/en-US/e1fbdaa9-0961-4171-ab51-91b8d37432de/action?threadDisplayName=lync-meetings-not-available-404-for-every-url
3. Made sure all my domain maps are correct
4. All certs seem 100% fine.
What is weird is:
https://dialin.hoster.com/dialin - works
https://meet.hoster.com/meet - works (Default cannot join the meeting page)
https://meet.hoster.com/tenantdomain/tenantuser/confid - Does not work
Any help will be greatly appreciated.
\\Tjopsta// http://www.tjopsta.netHi,
For first question, try the following steps:
Remove IIS URL Rewrite Module 2 in Control Panel.
Run Step 2: Setup or Remove Lync Server Components with Lync Server Deployment Wizard.
For second question, check if you can access Office Web Apps Server discovery URL via browser.
Check if you associate Office Web Apps Server with Front End pool.
Regards,
Lisa Zheng
Lisa Zheng
TechNet Community Support -
mail server version is JES messaging Server 6 2005Q4 :
My Access Manager:http://hostname:8080/amserver
last week, i login access manager, under the web label or configuration label�F
in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
then save configuration.
but after that i can not login access manager.
when i user admin login,it print:"
Authentication failed".
what should i do to restore access manage?
thanks!javatoall wrote:
Hi,
I login Access Manager, access sample "realm" -> Authentication->
Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
>
When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
I want to configure access proteced resourse for that user. How to configure that ?
read above use the authenticated users subject
Thank for every help.
VinhND.
Maybe you are looking for
-
Font smoothing and connections
Hope this is the best place to post this. I have a new Dell s2209w monitor connected to my Macbook (which I run in clamshell to get the full resolution of 1920x1080.) I'd been using it with a mini-DVI to VGA connector and it looked good, but just cha
-
Dear Friends Can body can please tell me how you can prepare a customer specific report. I am not talking about standard one. With regards sankalp singhai
-
Formula: If X category then X finish date
Hello all, I need a formula that allows me to select a value in one column (column labelled 'importance') which then changes the finish date (column labelled 'finish'). I have created an 'importance' column in which I can select values such as 'urg
-
I am trying to recooperate my pictures from photostream. I already reported my phone lost.
-
Photoshop installation affects MS Access bitmap handling
I have a problem, after installation of Photoshop CS5 in Windows, MS Access (I tried on Windows 7 and XP) does not longer show embedded bitmaps in database forms. Access can show only BMP files, so Photoshop installation somehow interferes with MS Of