Can't login to GMail from any browser
My daughter is visiting me and she has a Gmail account. She went to log into her account using my Powerbook and was told that cookies were not enabled, which is/was not the case. I tried Firefox, Camino, OmniWeb and Mozilla, and for each of them she got the same error message that cookies were not enabled. I had checked the cookie settings in each browser to make sure cookies were enabled before my daughter tried logging in. I don't use Gmail myself, so I have no experience with it. I have no problems logging into the Google Earth forums - the only Google product I use that requires a login.
Hi, Eme,
My daughter ended up connecting using my son's Windows machine which is on the same network and behind the same firewall/router as my Mac. Google sees the ip address assigned to us by our isp and not the ip addresses of the individual computers on the network.
She also says she had no problems connecting from my brother-in-law's Mac out on the left coast.
She has since hooked her portable windows machine into the network and is having no problems with her computer.
This is the first time I have run up against a site that I am having absolutely no luck with, however, as I don't plan on using Gmail and there are other options, solving this problem is more a case of curiosity and wanting to know what is going on.
Similar Messages
-
After 10.9.4 update can't access certain websites from any browser
I just updated to 10.9.4 Saturday evening the 26th. Sunday morning I noticed that I was unable to get to some websites but they worked from the ipad and other devices in the house so I rebooted thinking something odd was going on post update. It happened again a few times until I realized a pattern. I can not get to facebook, mail.google.com, google.com or most SSL only websites. Sites that redirect you to an SSL URL just sit there until they eventually time out. I can go to cnn.com but I can't load apple.com
if I try to go to bing.com which surprisingly doesn't force you to SSL it loads every time. This is reproducible in SafarI, Firefox, and Chrome consistently. Rebooting no longer resolves the issue and I couldn't even come here to post this from the iMac because the discussion website eventually forces you to use SSL. (Actually, while posting this that URL eventually appeared after a very long wait. Other websites eventually time out entirely. Safari fails to load Facebook at all)
EtreCheck version: 1.9.12 (48)
Report generated July 28, 2014 at 12:31:05 AM EDT
Hardware Information:
iMac (27-inch, Late 2012) (Verified)
iMac - model: iMac13,2
1 3.4 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
NVIDIA GeForce GTX 680MX - VRAM: 2048 MB
iMac 2560 x 1440
DELL 2208WFP 1680 x 1050 @ 60 Hz
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 1:9:53
Disk Information:
APPLE HDD WDC WD10EALX-408EA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 999.35 GB
Recovery HD (disk1s3) <not mounted>: 650 MB
APPLE SSD SM128E disk0 : (121.33 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 120.99 GB
Boot OS X (disk0s3) <not mounted>: 134.2 MB
Hitachi HDS723020BLA642 disk2 : (4 TB)
disk2s1 (disk2s1) <not mounted>: 66 KB
G-RAID (disk2s3) /Volumes/G-RAID: 4 TB (1.38 TB free)
USB Information:
Seagate Backup+ Desk 3 TB
EFI (disk5s1) <not mounted>: 314.6 MB
disk5s2 (disk5s2) <not mounted>: 3 TB
Boot OS X (disk5s3) <not mounted>: 134.2 MB
Seagate Backup+ Desk 3 TB
EFI (disk4s1) <not mounted>: 314.6 MB
disk4s2 (disk4s2) <not mounted>: 3 TB
Boot OS X (disk4s3) <not mounted>: 134.2 MB
SCM USB3.0 CF SD
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPhone
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Apple Inc. thunderbolt_bus
LaCie eSata Hub
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded]at.obdev.nke.LittleSnitch (3883 - SDK 10.8) Support
[not loaded]com.cisco.kext.acsock (1.1.0 - SDK 10.6) Support
Startup Items:
ciscod: Path: /System/Library/StartupItems/ciscod
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
ProTec6b: Path: /Library/StartupItems/ProTec6b
Launch Daemons:
[loaded]com.adobe.fpsaud.plist Support
[loaded]com.bombich.ccc.plist Support
[running]com.cisco.anyconnect.vpnagentd.plist Support
[loaded]com.google.keystone.daemon.plist Support
[loaded]com.microsoft.office.licensing.helper.plist Support
Launch Agents:
[not loaded]com.adobe.AAM.Updater-1.0.plist Support
[running]com.adobe.AdobeCreativeCloud.plist Support
[running]com.brother.LOGINserver.plist Support
[running]com.canon.MFManager.plist Support
[loaded]com.cisco.anyconnect.gui.plist Support
[loaded]com.citrix.AuthManager_Mac.plist Support
[running]com.citrix.ReceiverHelper.plist Support
[running]com.citrix.ServiceRecords.plist Support
[loaded]com.google.keystone.agent.plist Support
User Launch Agents:
[loaded]com.adobe.AAM.Updater-1.0.plist Support
[loaded]com.adobe.ARM.[...].plist Support
User Login Items:
iTunesHelper
Arq Agent
VLCStreamer
Dropbox
ImageTransferUtility
WirelessCameraService
AdobeResourceSynchronizer
Internet Plug-ins:
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.6 Support
AdobePDFViewer: Version: 10.1.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
CitrixICAClientPlugIn: Version: 11.7.2 - SDK 10.7 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.2 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes:
Citrix ShareFile Sync Support
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
fuse-ext2 Support
Printopia Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
G-RAID: Disk size: 4 Disk used: 2
Destinations:
Seagate Backup Plus RAID [Local] (Last used)
Total size: 5
Total number of backups: 62
Oldest backup: 2014-01-20 04:06:23 +0000
Last backup: 2014-07-28 03:53:23 +0000
Size of backup disk: Too small
Backup size 5 < (Disk used 2 X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
2%Google Chrome
2%WindowServer
1%fontd
0%firefox
0%hidd
Top Processes by Memory:
279 MBFinder
275 MBfirefox
221 MBcom.apple.ShareKitHelper
188 MBWindowServer
180 MBcom.apple.IconServicesAgent
Virtual Memory Information:
3.43 GBFree RAM
3.24 GBActive RAM
376 MBInactive RAM
975 MBWired RAM
922 MBPage-ins
0 BPage-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser until I installed their new google voice and video chat (made by vidyo) software. I was told by genius bar to install Yosemite, which I did. But that did not solve the problem. I removed macKeeper, as well, since a techie friend told me that could be the cause. Nothing so far has worked. When the problem first happened, it seemed to only happen in Chrome. Google voice calling out worked fine in safari, for about a day or so. Now I cannot call out from any browser. I can, however receive calls, and make calls within the video hangout.
I can be contacted directly if questions at gary at couplewise dot followed by the usual extensinYou can only suspend service for 3 months at a time (with or without payment) and only twice a year.
-
How do I access my Me email account from any browser?
How do I access my ME Email account from any browser?
To access to your @me.com mail address, open http://www.icloud.com, login with your Apple ID and choose Mail. This is the only way to access to your @me.com email from a browser. This website won't work with iPhones, iPods touch and iPads, as @me.com email supports is integrated into the operating system
-
Can't connect to websites with any browser. Bookmarks do not work but bookmarks through bookmarks edit works just fine.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Java update 2012-006 did not remove Java plugin from any browser
I successfully installed Java update 2012-006 via Software Update on my iMac running OS X Lion 10.7.5 (German) and it updated the Java runtime to version 1.6.0_37 and removed the Java Preferences application as expected, but it did not remove the Java plugin from any browser!
Safari and Firefox can still use the Java plugin as before.
I repaired permissions, rebooted, manually downloaded Java update 2012-006 and successfully installed it again without any change to the Java plugin: it is still present on my system and fully functional from any browser!
The web is full with messages from users missing the Java plugin after installing this update - but I could not find anything about the plugin not being removed!
Is anyone experiencing the same behaviour under Lion? I thought this would happen only under Snow Leopard...
What should I do now? Can I really trust this "successfull installation" of Java update 2012-006 on my system?
Thanks,
MichaelThanks - I will keep the symlink in place and I won't touch the Deploy bundle, because I need the plugin in Safari and I don't need Oracle's Java 7 for now...
If the plugin is supposed to stay in the Deploy bundle, this could help others who miss the plugin - they could just recreate the symlink, right?
To summarize I think we can state, that the Java update 2012-006 for Lion and Mountain Lion sometimes leaves the symlink in /Library/Internet Plugins/ untouched.
The circumstances that lead to this behaviour are still unknown.
The install log in Console shows that the scripts to create links and to delete obsolete files ran okay, but there was an error with the "postinstall" script. In spite of this the installation succeeded:
Oct 20 16:24:52 michaels-imac Installer[284]: Java für OS X 2012-006 Installation Log
Oct 20 16:25:56 michaels-imac _securityagent[305]: Running Install Scripts . . .
Oct 20 16:25:56 michaels-imac _securityagent[307]: Begin script: createlinks
Oct 20 16:25:56 michaels-imac _securityagent[309]: End script: createlinks
Oct 20 16:25:56 michaels-imac _securityagent[310]: Begin script: deleteObsoleteFiles
Oct 20 16:25:56 michaels-imac _securityagent[314]: End script: deleteObsoleteFiles
Oct 20 16:25:56 michaels-imac _securityagent[318]: Running Install Scripts . . .
Oct 20 16:25:56 michaels-imac _securityagent[320]: Begin script: postinstall.sh
Oct 20 16:25:56 michaels-imac installd[295]: postinstall: launchctl: Error unloading: com.apple.mrt.uiagent
Oct 20 16:25:56 michaels-imac installd[295]: postinstall: com.apple.mrt.uiagent: Invalid argument
Oct 20 16:25:56 michaels-imac installd[295]: postinstall: launchctl: Error unloading: com.apple.mrt.uiagent
Oct 20 16:25:56 michaels-imac installd[295]: postinstall: launchctl: Error unloading: com.apple.mrt
Oct 20 16:25:56 michaels-imac _securityagent[334]: End script: postinstall.sh
Oct 20 16:25:56 michaels-imac installd[295]: Installed "Java für OS X 2012-006" ()
Oct 20 16:25:56 michaels-imac Installer[284]: Displaying 'Install Succeeded' UI.
Does anybody know what "com.apple.mrt.uiagent" and "com.apple.mrt" stands for?
Obviously the "postinstall" script provides an invalid argument (at least on my system).
I have no idea if this is related to the Java Plugin symlink not being removed... -
After update 3.6.9 on 12/09/2010 can't login to gmail error 400
After update 3.6.9 on 12/09/2010 can't login to gmail error 400 in the left top corner and a white page.
I killed a lot of add-ons but stil no gmail. When using * IE Tab 2 Plug-in for Mozilla/Firefox I can login.Hello ,
please clear your cache and cookies, by following these steps:
#Open the Tools menu at the top of the Firefox window, select '''Clear recent history'''
#In the ''Clear recent history'' window, select '''Everything''' from the dropdown list.
#Click the arrow next to '''Details''' once, then check '''Cache''' and '''Cookies'''.
#Now, click the '''Clear now''' button to clear history. -
Can't login to Gmail because I don't have cookies enabled. Help?
I can't login to Gmail. It says cookies are turned of, but they ARE turned on. I have tried everything, including reinstalling firefox, but nothing helps.
I have the same problem and to get it to work I have gone into Tools, Options, Privacy, Show Cookies and deleted all cookies, then go to the Advanced tab, find Cached Web Content and click the Clear Now button. After you cleared the Cache restart Firefox and it works normal, but only for so long, in my case 1 day, then I had to do it over again. This has been happening since I went from Firefox 16 to Firefox 17.
-
How can I closed credit card from any update of my iphone
How can I closed credit card from any update of my iphone.
it is billed otomaticly. last bill around 32$. every month bill around 100$. I want to making control by manuel. so could you explain me how to do it?Hey donyh1,
Thanks for the question. You can hide the recent contacts in the multitasking screen by navigating to your Contacts settings:
Contacts settings - iPhone
http://help.apple.com/iphone/8/#/iph96b20610
Thanks,
Matt M. -
Can't login to Azure from Visual Studio when creating new app.
Hi,
I already tried this at two different computers.
Install VS 2013
Get VS Update 2
Get VS Web Essentials
Get Azure SDK 2.3
Launch VS, Log-in with MSDN acc.
File-New Project - ASP.NET Web Application (pick MVC + Web API)
Use "Create remote resource - Web Site"
OK
Get asked for Azure login again (sigh..)..I log in.
Get error message: "Unable to create remote resource. 'One or more errors occured'" .. really? eh.. :D
Ok, so now i try the Manage Subscriptions link to check the azure account.
Nothing is there.so I guess I need to sign in again because my previous login got forgotten
I log inagain.
Get dialog with "The task argument contains no tasks. Parameter name: tasks"
Ok, no Azure for me I guess.
btw: I then logged into web Azure portal and noticed I am over the spending limit now, so my subscription was disabled, but if this is the case why I can't login to Azure from VS, then just tell me. Skip those unrelated (for me) error messages.
Screenshot:
https://www.dropbox.com/s/06olj5icdn9brbo/Screenshot%202014-04-12%2013.23.00.pngHi,
Based on your description, it seems that your azure subscription was over the spending limit, about this account issue, I suggest you contact with azure support, it's the best choice for you. Please contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/
Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
About this incorrect error message, I suggest you submit this feedback at:
http://feedback.azure.com/forums/34192--general-feedback
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Q: Can I update my iPhone from any PC w/o downloading, just logging in to my iTunes acct? Can't find that option. Thanks!!
You mean update your iPhone software? Yes, you can do that on any computer, but it REQUIRES an internet connection & yes the software needs to be downloaded unless already on the computer and the exact version for your model iPhone.
-
I can't login to Facebook from the app or on Safari. Is anyone else have this issue? I deleted FB from my iPhone 4 and reinstalled it. Still didn't work.
Make sure you have checked off iCloud contacts in your Contacts app under Groups in upper left corner.
-
How can i stop deleted gmails from reappearing?
how can I stop deleted gmails from reappearing?
Ignore him! Syncing will not solve this.
if this just started, it may also resolve on its own. A reboot may resolve it quicker.
When you delete, are you confirming the delete by taping "done" Or "delete"? -
Can you access Time Capsule From any where, or do you have to be on the same network
Can you access Time Capsule From any where, or do you have to be on the same network
check out the post by Tesserax in this discussion.
-
i ave an ipad 2 with wifi only, can i get internet access from any cell phone, or do i need a specific phone or type of phone
I received an iPad 2 for Christmas (the 1st Apple item I've ever owned!) and own a Nokia N95 8GB mobile (that's pretty much on its last legs/ready to die any day).
On the Nokia I've got 2 apps (downloaded from/via Nokia's 'Ovi' app store): JoikuSpot & HandyWi. Both are the free versions.
I've not used HandyWi much - if at all - but JoikuSpot has been great. Basically, it creates a wifi hotspot (as pjl123 mentioned) in a couple of straightforward steps, and allows a few devices to be connected. It displays who/what is connected at a given time - so you can check if the guy having coffee behind you is piggybacking your hotspot or not! - data packets sent received etc.
The paid version has the benefit of allowing you to secure the hotspot and other security features. Their website is www.joiku.com, FYI.
Given how slow behind the 8 ball Nokia has been, their phones are getting cheaper and cheaper - given Joiku's meant to work with Nokia S60, Symbian ^3, Maemo, Meego & Sony Ericsson S60, this might be a cost effective option.
Ps. Ah! One more thing - Joiku's website specifies that 3G must be used; that WAP will not work. Good luck, enjoy!
Maybe you are looking for
-
I am trying to add my work email to my Iphone 3 and can't get it added....any ideas??
I am trying to add a second email/work email to my iphone and can't get it added...anyone have any ideas?
-
Ipod not recognised on computer, lost everything downloaded.
My Ipod screen tells me it is connected, Eject before disconnecting. I could not do this as there was no device recognised on the itunes store window. I had downloaded lots of podcasts, and wanted to syncronise them. After reading all the support pag
-
HT4623 When is the iOS 7 update going to be released?
Wanted to know when in the new ios7 going to be released for iPhone.
-
Hi Friends, My Apex was originally Apex 2.2 bundled in 10g XE. Then I downloaded Apex 3.1.1 and do the upgrade. Then comes a new Apex 3.1.2. Is this version compatible with 10gXE too? Thanks
-
How do I find out how much memory is still available on my IPod?
Hi! How do I find out how much memory is still available on my IPod? Thanks, Roland