Can't login to Hotmail via Safari since upgrading to OS X Yosemite

Has anyone else had a problem logging into Hotmail.com or Outlook.com via Safari (or Firefox, Chrome and any other browser) since upgrading to OS X Yosemite? I can log in via Safari on my iPad and iPhone, but not on my 2008 iMac running Yosemite.
Thanks.

The Canon MG series uses two protocols - Apple's Bonjour and Canon's own "canonijnetwork". Bonjour is used by the printer and scanner component, while the Canon protocol is used by the printer only. Given that you cannot locate either via the Add printer window and I'm assuming the printer is networked, then open Safari and then its preferences and select the Advanced tab. You will see an entry of Bonjour and the option to enable it in the Favorites bar or Bookmarks menu bar. Enable one of these and then close the Safari Preferences window. Now open the Bonjour bookmark (via the Favorites bar or Bookmarks menu). Do you see the MG5220?
If not, then check what IP address it is using by printing a network data list. If you then enter the IP address into Safari (for example http://10.0.1.10) this should connect to the internal web page of the printer. Does this happen? If yes, then it at least shows that you have a working connection between your Mac and the printer. If it does not connect to the MG5220 web page, then check what IP address your Mac is using and compare that to the MG. Typically for a home network the first three sets of numbers in the IP address (known as the subnet) are the same and the last number (known as the network address) is different for each device on the local network.

Similar Messages

10.4.5 - mac mini can't connect to network via airport since upgrade

I've been experiencing problems since upgrading to 10.4.3. Mainly, I've noticed that I can't easily connect to our wireless home network all the time. The pattern has been that I start by shutting down my computer completely. When I start up it again, it can't connect to the network. I have to create a new profile and then it will connect. That was buggy, but at least I found a hack. However, since upgrading to 10.4.5, I can't connect to our home network at all. The Internet Connect application says that I am connected to the base station, however I can't connect to the outside world via a shell, browser or email application. Our network is secured with a WEP and the base station is a D-Link. I searched the forums for some tips, but didn't find anything. Pointers appreciated.

Be very careful about the sequence you do it. You must make sure that the airport connection is turned off (i.e. the airport menu icon looks more like a profiled eyeball without the iris than a series of lines like the towers of hanoi). Then create a new location in the Airport network preference, and make sure that these settings are there under Options
1. Keep looking for recent networks
2. Automatically add new networks to the preferred network list.
3. Change the status of Enable interference robustness.
And by default, join preferred networks in the Airport location.

Can´t login to Facebook on Safari

Hi there. Have this annoying problem, i can't login to Facebook on safari.
It charges the start page but when i click on login it takes me to the start again, no warnings or anything...
It only happens on safari, other browers work fine.
Any suggestions?
I've erased cache, cookies, restarted my mac, nothig seems to work...
Hel pleaaaase!!
Thanks!

Hi,
From your Safari menu bar click Safari / Preferences then select the Autofill tab. Click the Edit button next to: User names and passwords.
Delete the Facebook url.
Quit Safari. Open Keychain Access (Applications/Utilities) Select Passwords on the left.
Delete the Facebook keychain.
Relaunch Safari. Try logging into FB again. If you still have problems, go back to Keychain Access and delete the "Safari Forums Autofill" keychain.
Relaunch Safari and try again.
Carolyn

I can't login by hotmail :(

i can't login by hotmail
see the image
Solved!
Go to Solution.
Attachments:
ScreenShot_20150529225606.png ‏20 KB

Try this:
Go to Windows Start -> All Programs -> Accessories -> Right click on Command Prompt, select 'Run as administrator'.
In the Command Prompt type: cd c:\windows\syswow64 and press Enter.
Next type this and then press Enter:
regsvr32 jscript.dll
Next type this and press Enter:
regsvr32 jscript9.dll
After each Enter you should receive a message saying that DllRegisterServer in XXX.dll succeeded.
Reboot your computer.
Make now the test showing if your Internet Explorer can execute JavaScript.
Open in your Internet Explorer this page and watch the response:
http://javatester.org/javascript.html

I've reset my account password and i can't login to hotmail anymore

i've reset my account password and i can't login to hotmail anymore.
neeed help

dragonu wrote:
i've reset my account password and i can't login to hotmail anymore.
neeed help
What account password? Are you saying you change the password to your Hotmail email account?
If so did you make the changes on your iphone in message settings?

I can't get Google Autofil to work since upgraded to Firefox 4

I can't get Google Autofil to work since upgraded to Firefox 4
running on windows XP

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Since upgrading from Mavericks to Yosemite Mail, Spotlight,Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

Since upgrading from Mavericks to Yosemite Mail, Spotlight, Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

If you have an external drive with an OS X Time Machine backup, then do restore of your last backup. If you have an external drive with a bootable clone of your previous system, you can boot to that clone and re-clone the OS X on your external drive back to your Mac's internal drive.
If you do not have either of these available, then the reverting/restoring process becomes much more complicated and involves purchasing an external drive and backing up your current system to that drive, then erasing, reformatting your hard drive and now your only options to installng an OS X version is doing a clean install of OS X 10.6 Snow Leopard, then upgrading, again, to either OS X 10.7 Lion or 10.8 Mountain Lion. OS X 10.9 Mavericks is no longer available for download and Apple has not made OS X 10.9 Mavericks available in any other form to be able to redownload and install.
Maybe it would be better to explain in detail your issues with Yosemite to see if any of us here can help you with your difficulties.
I am not running or using Yosemite, so I cannot help you with your Yosemite issues,
There are others here who can help you with Yosemite.
Good Luck.

Cannot access iphoto: Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5

Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5 or 6 times already and end up with the same result. NOTHING...
Library Upgrader IS NOT WORKING. Please help

Thx Leonie,
Surprisingly, I just went to the crash reporter and there were no reports re: the iPhoto issue. This is the only report I found, which I not sure is related to the iPhoto issue:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>OSBuild</key>
<string>10.10.2:14C109</string>
<key>appRecords</key>
<array>
<array>
<string>AppRecord</string>
<string>DiskImageMounter</string>
<string>com.apple.DiskImageMounter</string>
<string>396</string>
<string>10.10.1</string>
<integer>7</integer>
<integer>0</integer>
<integer>1</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
</array>
<array>
<string>AppRecord</string>
<string>com.apple.ncplugin.weather</string>
<string>com.apple.ncplugin.weather</string>
<string>32.3</string>
<string>1.0</string>
As for the TimeCapsule indeed, I use it as an extended drive but I'm surprised it would be considered a FAT-32 formatted drive as this is an Apple device.
I asked the apple reps if I could use the TimeCapsule for such purpose and no one raised a concern. It's also surprising that I didn't have an issue with this prior to the upgrade to OS X Yosemite.
Having said the above, thank you for your help - if the TimeCapsule is indeed the issue, perhaps I can solve the issue by transferring the iphoto library to an OS extended hard drive.

Since upgrading to OS X yosemite my printer will not work.

Since upgrading to OS X Yosemite my printer will not work.

I found the solution in another thread. Thanks to frankglyn who posted it there.
I've just copied it here, as this seems to be the most active thread on this subject.
The solution (steps A to C) worked fine for me and others and should work for you as well, until Kodak will come with an updated driver. Then, you can revert the changes as also described below (steps 1 to 7)
A) in Spotlight Type Terminal and then press enter.
This should bring up the terminal window/program.
B) In the Terminal type sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
It will ask for your password.
C) After that type following: sudo launchctl stop org.cups.cupsd
After that if you are lucky the printer driver should start to work. (which it did in my case)
I hope this works out for you, if not then you can do following to revert the changes:
In case you want/have to revert the changes:
1) Open the terminal as usual (Spotlight type Terminal hit enter and wait for the terminal window to appear)
2) then type: cd /etc/cups
3) then type: sudo nano cups-files.conf
4) 'type in your password'
This brings up a command line editor which you can use to edit the file
5) Remove the last line which says Sandboxing Relaxed
6) press 'ctrl x'
And then confirm with y when being asked if you want to save the changes
7) after that type sudo launchctl start org.cups.cupsd

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I s

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I subscribe to Adobe's Premium Support? Every time I've tried (through contact support) I just get taken on an unending loop.

I think we need a lot more information.
Exactly what does the message say?
Exactly what files are you trying to open?
Exactly how are you trying to open them (what menu command or button or mouse action or keyboard shortcut)?
And lastly, what version of Lightroom are you using?

My iMac keeps showing an install bar every time I reboot or restart since upgrading to OS X Yosemite. This never occurred in any of the previous OS. Is this new or a problem?

My iMac keeps showing an install bar every time I reboot or restart since upgrading to OS X Yosemite. This never occurred in any of the previous OS. Is this new or a problem? I have an iMac (27-inch Mid 2010), Mac OS X (10.6.7).

they moved to a progress bag instead of the spinning gear or beach ball

Outlook stopped syncing with iCloud - All of the sudden (6/12) outlook stopped syncing saying my username/password failed to authenticate. I didn't change anything. Can login to iCloud via safari

outlook stopped syncing with iCloud - All of the sudden (6/12) outlook stopped syncing saying my username/password failed to authenticate. I didn't change anything. Can login to iCloud via safari

outlook stopped syncing with iCloud - All of the sudden (6/12) outlook stopped syncing saying my username/password failed to authenticate. I didn't change anything. Can login to iCloud via safari

Can no longer access Facebook via Safari on iPhone

Ever since I loaded IOS 6 onto my iPhone 4, I cannot get to Facebook via Safari...it automatically reverts to the fb app. Even if I put www.facebook.com into the browser. I still access fb via Safari on my ipad (new ipad). This is important as I have low vision and the font is too small on the app.

I have the problem after upgrading my iPad to iOS 6.
It started with the app store, then facebook app and finally can't access to any apple.com page.
Already restore the iPad and now I can access to app store. Still working to get back my access to facebook.
If anyone has an idea about this?

Can't sign in yahoo mail via safari after upgraded to iOS6

After upgraded to iOS6, I was able to sign in yahoo mail via safari only the first time but after that could not. Every time when I tried to sign in yahoo mail, it returned to sign in page. I have had the same problem with other upgraded iphones, but not iphone with iOS 5.
But if I clear history and cookies in the safari setting, I can sign in yahoo mail only once. Every time when I want to sign in yahoo mail, I have to go to the safari setting and clear history and cookies. I have no problem with gmail and hotmail.

After upgraded to iOS6, I was able to sign in yahoo mail via safari only the first time but after that could not. Every time when I tried to sign in yahoo mail, it returned to sign in page. I have had the same problem with other upgraded iphones, but not iphone with iOS 5.
But if I clear history and cookies in the safari setting, I can sign in yahoo mail only once. Every time when I want to sign in yahoo mail, I have to go to the safari setting and clear history and cookies. I have no problem with gmail and hotmail.

Can't login to Hotmail

When I try to login to Hotmail I get a blank page, except for a "Choose File" button in the upper left corner, followed by "no file selected."
I've been using Hotmail for many years and never seen this problem with Safari or any other browser. I can access Hotmail from Camino and Firefox without a problem.
Has anyone else seen this problem?

Most signs point to a programming conflict between Apple's strict adherence to the most current WebKit standards and Hotmail's lack of including Safari as a "legitimate" browser.
For now, the issues with using Hotmail inside Safari a seem to be Hotmail's. However, as they adopt the most current WebKit standards it should be expected to work properly.
I have seen a report dated April 6 (elsewhere) that one or more users now find that Hotmail works with Safari 4 beta, so perhaps Microsoft have now updated Hotmail to actually do what they say it can.

Can't login to Hotmail via Safari since upgrading to OS X Yosemite

Similar Messages

Maybe you are looking for