Can't Login to my VM Server

Hi,
I had created a VM two months ago and I can login and everything running fine. Then I convert the package to pay-as-you-go before the trial period expired. Today I try to login again but I can't log into my server using the same password. I don't
know what is happening. Anyone can provide some advice on this? Thanks in advance.

Hello,
Based on your description, you create a free Azure VM two months ago and then convert the free trial subscription to a pay-as-you-go account before the 30 days trial ends (last month). Did you cannont to the server successfully after convert to
pay-as-you-go? Or it is you first time connection after convertion?
Just as Jessica post above, you can check the service status on the Windows Azure Management Portal and verify the Subscription you used is active.
If the Subscription is correct and server is running, and you did get any information about failed connection, then you should connect to Windows Azure support.
You can contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/ .
Reference:http://blogs.msdn.com/b/wats/archive/2013/10/12/windows-azure-30-day-s-free-trial-uncovered.aspx
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Similar Messages

How can I login on a remote server ?

I want to copy some files from a remote server automatic by using a java program ,how can i do it?
I just can't login!!
i use the following code but I get nothing only the black green!!!
Any advise may be useful,
thanks in advance!
Socket s = SocketOpener.openSocket(host, port, timeout);
try
          System.out.println(s);
          BufferedReader read = new BufferedReader(new InputStreamReader(s.getInputStream()));
          PrintWriter write = new PrintWriter(s.getOutputStream(),true);
          write.println("username");
          write.println("passwd");
     //     write.println("ls");
     //     write.println();
          boolean more=true;
          while(more)
               String line= read.readLine();
               if (line==null)more=false;
               else System.out.println(line);
     System.out.println("error");
     catch (IOException e)
     //     System.out.println("error"+e);

Why u r using Socket Class? Instead of this u use RMI.
In RMI u can access server remotely.I don't know that u know anything about RMI or not.If yes then ok,otherwise mail me I will tell u total detail of how to use RMI.
My email address
[email protected]

Can not login to OS X Server 10.4

Hi, I'm using OX Server 10.4 with Open Directory.
I've been experiencing a strange behaviour sometimes. Every other month or so, users stop being able to login via SSH to my server.
Disabling and enabling SSH in sharing doesn't do the trick...maybe it is some ApplePasswordService issue.
I just reboot the server as I never found any way to resolve this either here or at any other site.
Today, feeling confident that it could be an ApplePasswordService issue
I've done the following:
prompt>NeST -stoppasswordserver
prompt>NeST -startpasswordserver
Didn't work either...
I reboot the server and now I can not login locally with my personal or admin account, so now it's complicated.
Booted in Safe mode (pressing shift when booting) but i get the same thing. After entering the username and password the server shows that progress colour circle spinning forever.
Booting in single user I was able to check the logs.
In /var/log/secure i get:
SecurityAgent[104]:Showing Login Window
SecurityAgent[104]:User Authenticated: continue login process
And nothing else after that.
I've done "fsck -fy" in single user also without any result. I really need some help here...
Any ideas please ?
Thank you very much.
Regards
David

I think I made a mistake and typed a command made for NetInfo. Now, could that disable Open Directory authentication ? If so, How can I restore the Open Directory authentication ?

Can't Login to Embedded Web Server for HP Officejet Pro 8600 N911g

I have a HP Officejet Pro 8600 N911g that I am trying to access in order to update the adress book for the scanner but in order to do that I must login. I have never set up a user name or password for it. Is there a default username and password?

Hello @jessescopely,
Welcome back to the HP forums.
I understand that when you try to access the EWS (Embedded Web Server) for your Officejet pro 8600, you are prompted for a username and password.
Unfortunately there is no default username or password.
On rare occasions this can be fixed by restoring the network defaults.
Go into the Setup menu.
Select the Network sub menu.
Choose Restore Network Defaults.
I have also sent you via private message the steps to reset your printer back to factory defaults.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
If neither of those clear the password, please call our technical support at 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Can't login to Mac X server after an unexpected CPU reboot

I'm using Mac X server 10.4.10.
Here is an interesting situation....after an unexpected system reboot, I was not able to login. This happened 2 twice. The first time, I was able to boot from another drive which was a clone of the drive with the difficulty, I went in to the passwd file located on the drive with the difficulty and enabled the root user, and after doing a startup on the drive with the difficulty, I was able to use the root ID to login. After doing so, I was able to reset the passwords normally used, and they worked going forward.
Some time later, the unexpected reboot occured again. I tried the above method to regain acess and it did not work. So now, I'm wondering what is part of a normal shut down process that is needed to be in place in order for the next login to work.
I ran all the built in disk maint routines but that did not help. I can boot from another drive and have full access to the data, I can also do a restore and over write the OS info with a baseline functional install, but I am wondering if there is another short cut way of resolving this. I'm thinking that there is an encrpyted file that gets out of sync if a proper shut down is not done resulting in an normal login process from happening. I'm not using keychains and do not have any speacial features enabled as well as just running bare bone defualt configs.
This is not the ned of the world...I can redue the install pretty easy and still have access to the data...just wondering if anyone has a short cut process to fix this.

"I would try booting from the cd and resetting the password of a local acount. This will at least allow you to log in. You might want to look into why the server is rebooting though as that seems to be the real problem. "
booting from the install cd...easy......resetting local account...interesting ....how would that be done?

Can't login to Final Cut Server with AD group...

I just setup the Final Cut server and I also linked it to Active Directory so we could use the groups on it. I opened up the preferences and added a group to that from AD and then set them with admin. However, when I login with a user who is a member of that group it won't let me in. The only user I can get on with is the local admin. Does anyone know how I can use the members of the AD group so if their password changes or the group membership changes I don't always have to go and update it?

now when I run:
./adprincadd.pl -dc <fully qualified hostname of AD server> fcsvr/<fully qualified hostname of FCSVR machine>
I get:
No Kerberos TGT!
You must have kerberos ticket that allows writing to the computer record in AD. Use kinit to get a ticket
but kinit give me: Cannot find KDC for requested realm
How can I correct this so I can get the kerberos ticket and resolve this?

Can not login groupspace when admin server is not running

hi Experts,
I am using wc11.1.1.5, I found an issue like this:
1. startup admin server
2. startup WC_Spaces
3. stop admin server
4. login WC_Spaces
At this time, I got the following issue:
=============================
Caused By: oracle.security.jps.service.idstore.IdentityStoreException: JPS-01520
Cannot initialize identity store.
at oracle.security.jps.internal.idstore.util.IdentityStoreUtil.getIdenti
tyStoreFactory(IdentityStoreUtil.java:168)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.getIdmF
actory(AbstractIdmIdentityStore.java:174)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.initSto
re(AbstractIdmIdentityStore.java:124)
at oracle.security.jps.internal.idstore.AbstractIdmIdentityStore.getIdmS
tore(AbstractIdmIdentityStore.java:110)
at oracle.webcenter.framework.service.Utility$1.run(Utility.java:1124)
at oracle.webcenter.framework.service.Utility$1.run(Utility.java:1121)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.webcenter.framework.service.Utility.getDefaultIdentityStore(Ut
ility.java:1118)
at oracle.webcenter.framework.service.Utility.getUserUniqueIdentifier(Ut
ility.java:1046)
at oracle.webcenter.framework.service.Utility.getUserName(Utility.java:6
05)
at oracle.webcenter.webcenterapp.model.security.WebCenterSecurityUtils.g
etUserUniqueID(WebCenterSecurityUtils.java:2050)
at oracle.webcenter.webcenterapp.internal.metadata.WebCenterUserCC.getVa
lue(WebCenterUserCC.java:74)
at oracle.mds.internal.cust.CustomizationUtils.appendCLs(CustomizationUt
ils.java:456)
at oracle.mds.internal.cust.CustomizationUtils.getCLList(CustomizationUt
ils.java:282)
at oracle.mds.core.MDSSession.getMetadataObject(MDSSession.java:3121)
at oracle.mds.core.MDSSession.getMetadataObject(MDSSession.java:1228)
at oracle.mds.core.MOResolver.getMetadataObjects(MOResolver.java:213)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourcePr
ovider.getMetadataObjects(MdsMetadataResourceProvider.java:421)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourcePr
ovider.loadUnmutalbeMetadataResources(MdsMetadataResourceProvider.java:372)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourcePr
ovider.loadResources(MdsMetadataResourceProvider.java:346)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourcePr
ovider.getBootstrapResources(MdsMetadataResourceProvider.java:238)
at oracle.adf.controller.internal.metadata.MetadataService$Bootstrap.add
All(MetadataService.java:905)
at oracle.adf.controller.internal.metadata.MetadataService.initializePag
eFlow(MetadataService.java:657)
at oracle.adf.controller.internal.metadata.MetadataService.getPerUserCac
he(MetadataService.java:760)
at oracle.adf.controller.internal.metadata.MetadataService.getPerUserCac
he(MetadataService.java:729)
at oracle.adf.controller.internal.metadata.MetadataService.getAdfPageFlo
w(MetadataService.java:459)
at oracle.adf.controller.internal.metadata.MetadataService.getPageFlow(M
etadataService.java:448)
at oracle.adf.controller.internal.metadata.MetadataService.getActivity(M
etadataService.java:304)
at oracle.adfinternal.controller.state.ViewPortContextImpl.getPhysicalUR
I(ViewPortContextImpl.java:1074)
at oracle.adfinternal.controller.application.AdfcPageResolver.getPhysica
lURI(AdfcPageResolver.java:75)
at oracle.adf.controller.faces.lifecycle.Utils.getPagePathFromViewId(Uti
ls.java:44)
at oracle.adfinternal.controller.application.model.UpdateBindingListener
.setBindingELVariable(UpdateBindingListener.java:108)
at oracle.adfinternal.controller.application.model.UpdateBindingListener
.beforePhase(UpdateBindingListener.java:61)
================
after restart admin server, this issue was solved.
My question is this normal? this could be a issue for high availability.
Best regards

Admin server's purpose is - to control other managed servers.For High availability you can use clustered enviroment and other stuffs as suggested by oracle.
Without running Admin server how security->myrealms>Users will work ?Users will not be available ,that's why you are getting such errors.
Regards,
Hoque

Can't Login to Netware 4 server using Client 3.4

Hi,
I have a small network with a dedicated server and two workstations
connected using a linksys switch. The dedicated server is running
netware 4.x (an old character based netware system). Both workstations
have Windows 98 and log in to the server using Novell Intranetware 4.11
software for Windows 95, which is several years old. Recently, I added a
workstation and downloaded client 3.4 to use to access the server rather
than install the Intranetware. It turns out that I can't get this
workstation to log into the server using client 3.4. I get the login
screen, but it reports it can't find a server or tree, even though I
entered them correctly. Does anybody know why it won't access the server
while the other workstations can?
Thanks very much.

On Sun, 10 Jul 2005 17:58:38 GMT, [email protected] wrote:
>No, I didn't try installing it IPX only. Would I just reinstall the
>client software and choose IPX? Also, what is the term frame type mean?
It is a method for packaging data for transmital over IPX.
>Where do I find out what frame type the computers have?
At the console enter the command CONFIG. The displayed output will
include the frame type. On the workstation, go into the Control
Panel, Network, and find the NWLink IPX/SPX/NetBios Compatible
Transport Protocol, and open its properties. Set the frame type to
match the server. If more than one frame type was displayed on the
server, use 808.2 if it is listed.
>Is there any
>other info I might need besides the login, server name, tree, and
>context? This new workstation has Windows 98. In the Windows control
>panel under network settings, what client should be installed? It gives
>3 options.
>
> 1. Netware client 32 bit
> 2. Netware client shell 4.x
> 3. Netware client 3.x
These option are for the Microsoft client for NetWare, which is not
aware of NDS. Install the Novell Client for NetWare. Choose Custom
install, IPX only.
Donald Albury
Novell Product Support Volunteer SysOp
Sorry, no replies to e-mail responses
"If something is so complicated that you can't
explain it in 10 seconds, then it's probably not
worth knowing anyway." Bill Waterson

10.6 client can't login to 10.9 server

Wondering if there were any known issues with 10.6 clients connecting to 10.9 server.
When the user tries to log in, they get the invalid username and password message. It does work from 10.9.
We just upgraded from 10.6 to 10.9 server. We had a work through a number of issues with that. We changed our hostname before upgrading and things were working until we upgraded to 10.9 server. Had to rebuild open directory and fix some DNS issues. Our DNS server is now on a different server.
These errors from system log may be relevant.

Verify that your network is functional and correctly-configured, and that your DNS services are correct, as a starting point. Then definitely check the logs on the server, looking for clues around the particular errors being encountered.
Beachballs within the administrative tools can be triggered by network errors and by invalid DNS configurations, and wonky network settings can derail the distributed authentication.

Can not login in Cisco Presence server

Hello. I have installed a new Cisco IM and Presence server. But I cannot login to it with my login and password((( Instead I get:
"Database communication error" message. What it could be?

Have a look at this link, discussing about a Similar issue
http://stackoverflow.com/questions/8075784/error-message-provider-shared-memory-provider-error-0-no-process-is-on-th
Satheesh
My Blog |
How to ask questions in technical forum

Users can't login after upgrading to Server 4

I've upgraded my classroom server to OS X Yosemite 10.10 and Server.app to Server 4. All of my client stations are running OS X Mavericks 10.9.5. Users were unable to login. I've then upgraded the entire lab to 10.10, that seems to have fixed the issue. Sort of. 2 of the client stations are still unable to login. They are Mid 2010 Mac Minis, I have 4 of them with the same specs, yet 2 work fine and 2 don't. The rest of the lab is also Mac Minis, all newer than the previous, all working fine. Any suggestions as to why those 2 don't want to cooperate?

In server administration, under Open Directory was set to Open Directory Master. I changed it to Standalone Server which is what we have and that took care of everything.

Can't login to admin server

Hello, I have a problem which is driving me crazy.
I simply can not login to the admin server.
I'm connecting to the flash admin-frontend which is hosted on the same server which the FMS is running on. The FMS version is 3.0.1 and it's running on RHEL5.
I've set the user and password in conf/fms.ini. I have checked that I have permission to connect in conf/Users.xml. Everything seems like it should work, but it just won't let me in and when looking in the logs (logs/admin.00.log) I just get a lot of lines saying "Failed login attempt from..."
Apart from this the server works. We are still using it for streaming and we have been able to login to the admin interface before, but it was a long time ago and now it just won't work anymore.
Any ideas?

Thanks for the reply.
The admin log just contains a lot lines like these:
2011-04-01 14:57:31 22552 (w)2671165 Failed login attempt from 130.239.57.123 at Fri 01 Apr 2011 02:57:31 PM CEST. -
2011-04-01 14:57:32 22552 (w)2671165 Failed login attempt from 130.239.57.123 at Fri 01 Apr 2011 02:57:32 PM CEST. -
And here's the Users.xml, I'm actually not sure why there's a password in here as well, or how it is updated (since it's encrypted).
<Root>
    <UserList>
        
        <User name="${SERVER.ADMIN_USERNAME}">
            
            <Password encrypt="true">dTh0eXJlcw=</Password>
            
            
            
            
            
            <Allow>all</Allow>
            
            
            
            
            
            <Deny></Deny>
            
            
            
            
            <Order>Allow,Deny</Order>
        </User>
    </UserList>
    <AdminServer>
        <HTTPCommands>
            
            
            
            
            <Enable>${USERS.HTTPCOMMAND_ALLOW}</Enable>
            
            
            
            
            <Allow>ping</Allow>
            
            
            
            <Deny></Deny>
            
            
            
            
            
            <Order>Deny,Allow</Order>
        </HTTPCommands>
    </AdminServer>
</Root>

Can't login to iCloud Panel on PC

after installing iCloud panel and trying to login I get message "Can't login because of a server error" I check iCloud status and all is OK. I've done numerous cycles of uninstalling rebooting reinstalling ad rebooting. Same result.

I suffered this problem, too. The error message is useless. I found a fix!
The same problem occurs in iTunes, but iTunes gives a better error message: "0x80090318". I googled the solution.
Open a command prompt as administrator. “C:∖windows∖system32∖netsh winsock reset”. Reboot. Done. Good luck!

How do i login to a Specific Server Node

We have three Server nodes in our production cluster for the Portal. We deployed a .ear file for custom webdynpro development. SDM during the the Deplyment should have deployed the .ear file on the server nodes. But it looks like the .ear file was not deployed on some server nodes.
My problem i do not know a way whyere i can specifically login to the specific Server node to check the Appliation.
My end users are getting Errors and i can not see them becuase i am not logged in to the same server node.
Any help is Appreciated.
Sudheer.

One way that I achieve this is by modifying the saplb_* cookie in the request. You can use firefox cookie editor addon to modify the cookie before a request is sent.
For e.g. your saplb_* cookie might have this value (J2EE31487700)31487750
here the node is 0 if you change the last digit to one it will go to node 1 so the value will be (J2EE31487700)31487751
Hope this helps.
To make sure the node is changed to 1, you can check the response cookie and it should contain a trailing 1.

Missing Images and CSS when going to portal/server.pt can't login

Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
    ======= Diagnostic Run Complete =======
    Startup completion percentage: 100% (50 steps out of 50 complete)
    ===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
    Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
    AllowOverride None
# Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
    Options Indexes
    AllowOverride None
    Order allow,deny
    Allow from all
    <Files *.html>
        SetHandler type-map
    </Files>
    SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
    RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of        .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external

I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps.

Can't Login to my VM Server

Similar Messages

Maybe you are looking for