Can't login to Server Preferences

Have 10.6.1 Server running as a Open Directory Master. I cannot log in to Server Preferences using either my admin or directory administrator account. I get the message "Unable to authenticate to the Open Directory Master" - "This computer record credentials could not be retrieved from the System keychain."
LDAP/Password server/Kerberos are all listed as running in Server Admin (which is working fine). I also use Open Directory for Kerio Mail Server, and that's working fine.
changeip -checkhostname comes back fine. While I don't have a major need to use Server Preferences, I'm worried that being unable to log in signals a larger problem with Kerberos that I'd like to nip in the bud.

I had a similar problem and was able to fix it. Here was my situation:
I had a ldap master (host foo1) and a ldap slave (host foo2). The slave's server preferences stopped working after it became a slave. I would get the same errors as you did when trying to open server preferences. I did some searches and stumbled across this site: http://www.macgasm.net/2009/11/04/mac-os-x-10-6-1-server-server-preferences-brok e-and-how-to-fix-it/
This only kind of applies to the issue at hand but I was able to take this info and apply it to my problem.
Here is what I did:
I discovered I was missing the password item called com.apple.opendirectory on foo2 (located in the system keychain)
I logged into foo1 and examined the com.apple.opendirectory password item on foo1. I copied all of the info (exported to text) --- including the password. I then logged into foo2 and created a new password item in the system keychain. Making sure to include all of the info from the previous export. The only difference is that I changed the hostname. I then made sure that access control was set to allow all applications.. (this is very important). Server preferences then worked.
An example of what I exported and what I re-created:
name: com.apple.opendirectory
Kind: application password
Account: foo1.yourdomain.com$
Where: Com.apple.opendirectory
Password: some_password
On foo2 I created this password key:
name: com.apple.opendirectory
Kind: application password
Account: foo2.yourdomain.com$
Where: Com.apple.opendirectory
Password: some_password
Notice the host change. This key must be in the system keychain and allow access to all.
Good luck.

Similar Messages

Icloud: can't login, serious server side issues

I'm having serious issues whith iCloud, can't sign in. I have two appleID's: 1 @mac.com and 1 @me.com (although the account name on appleid.apple.com is withouth the email-suffix "@me.com")
I would like to login in on iCloud.com with my @me.com AppleID and on iTunes with @mac.com. Off course merging the two AppleID's would be better.
Issue:
Can't login on mac os x 10.7.3 (Safari icloud.com, system preferences) with neither AppleID's
Safari icloud.com: Connection error, icloud error while connecting to server
Sys prefs: you can't login this moment
Depending where I login, It works with @me.com or without the mail-suffix
Can login on iphone/ipad/ appleid.apple.com
Tried:
- little snitch not present
- deleted ~/Library/AppSupport/iCloud/Accounts
- emptying Safari cache
- resetting passwords on appleid.apple.com
Other observation:
- could login with safari on other account (guest), no longer possible
- after deleting account on iphone, recreating account logged in with me.com appleID, login works but shows @mac.com account name
- on iOS password from mac.com appleID works with me.com
- can login on appleid.apple.com with both appleid's (with correct passwords)
- me.com accountname is NOT in the form of an email addres, when trying to change accountname in a me.com address, this gets refused

Just upgraded to 10.7.4.
Solved some issues.
I can login via System Preferences and with iTunes with two different accoutns. Although. I have to use the password of the @mac.com AppleID to login with the @me.com AppleID (wiht mail-suffix). Like on my iPhone before.
If I login on the Apple support site I have to use the @me.com (without the mail-suffix) and the correct password.
Understand who can.
Left to check: Fotostream, but first I have some real work to do. Thorough troubleshooting next week.
I'm no programmer but I've administered servers (solaris, mac, win) for 8 years in a multi-tier environment and I'm rolling out an identity mgt system in a 40k employee organisation at the moment.

Can't login to server as administrator

Hello,
after e restart from a 10.6.7-Server (XServe) it is impossible to login through screen sharing nor ssh as administrator.
As Server Admin and Workgroup-Manager shows me it seems to work properly.
In the moment it is impossible to put a keyboard to it, any other suggestions?
Thanks!

Hello Craig,
I think not… I gave permissions for all services to all users and groups just now, any results.
I can't login with root, nor with ladmin.
I was at the server directly today, started up with a screen and a keyboard, any possibility.
An older System started without problem, from an externel HD no problem, from System DVD no problem.
Single user mode worked (but I can't do too much in it).
Safe boot didn't work, there was a kernel panic!
Because all the other systems worked, I think there is a software failure. I really would like to find the error and not to re-initialize the server - there was too much work in it!
Thanks for further help.
Peter

Can't login to server, from Server.app

I have a very odd problem. After an clean install of Lion Server 10.7.2 i can't access my server from server.app or Server admin?
I have tryied this solution but no luck http://support.apple.com/kb/TS3960?locale=en_US
The servermgrd IS loaded?
Anybody theres have a clue??

As root go to /System/Library/LaunchDaemons and edit com.apple.servermgrd.plist and change the "Disabled" boolean to "<true/>". Then say:
launchctl load -w /System/Library/LaunchDaemons/com.apple.servermgrd.plist
For some reason that I have not discovered yet the system keeps changing the bool back to "false" on occasion.
- Kent

Can't login to server while trying to add a new member to group.

While trying to login to add another user to the enterprise group, "unexpected error" comes up hence can't login to create a new user, although sending the new user an invitation.
Can someone please solve this asap?

I figured it out. For any of you having problems with the new Sync (there are lots of posts out there from unhappy people) I have the fix.
If you revert back to FF 28 everything works great. FF staff will tell you about the gloom and doom of using older versions. They don't seem too concerned that those of us who have relied on Sync for years and probably only use FF because of Sync are unhappy with the new less secure version and in my case can't even register a new account.
I think you can get away with going up to higher versions and maintaining the old Sync. If anyone knows what the highest working version is please post it. I will probably upgrade one version at a time to see where it stops working and will post here.

Can't login to Server app after hardware and hostname change

I used Carbon Copy Cloner to completely clone a Mac mini Server onto another Mac mini Server. (The idea being that I can install and configure additional software just once and then easily set up identical servers by copying all hard drive contents.) This seemed to work great – the second Mac mini runs fine, including logins, networking etc.
To avoid conflicts between the two servers, I changed the computer name in System Preferences/Sharing and ran:
sudo scutil --set HostName someothername
sudo changeip oldip newip
The problem is that the Server app won't let me log in on the second Mac mini. It lists "This Mac" in the "Choose a Mac" dialog, but when I enter the correct username and password, login is refused (the login dialog is "shaken"). But the same login works for the operating system and SSH, and the account was definitely "allowed to administer this server". On the original Mac mini I cloned from, I can login with this account just fine.
I even added the user account to the "Open Directory Administrators" group using ldapmodify on the command line, but that didn't help.
Is it possible that there's something in the user directory that's bound to the hardware (maybe the Ethernet MAC address) or the hostname?
Do you have any idea how I could fix this? I'm grateful for any help…

this hasn't worked for me.
When i follow the additional steps using terminal, the second command brings back the same outcome - 'David is not in the sudoers file. this incident will be reported'.
I've been having trouble with login on for a week but didn't realise this was the problem. I've reset passwords, reinstalled OSX (twice) and now, bizarrely, i can log onto the mac mini as the administrator, but once logged in, the 'administrator' password doesnt work for anything. I can run Software Update because it comes up with a message:
"Software Update wants to make changes. Type an administrator name and password to allow this".
I then put in my password but it shakes and tells me its wrong.
Can anyone advise any other solution? I'm kind of stuck - because the system doesn't recognise my admin password for updates, i cant update anything. And also because my itunes library was set up by a newwer version (I reinstalled OSX believing it would fix it reverting it back to a previous version) i can't listen to any music.

Can't login to server after upgrading to 2012 R2 from 2008 R2.

I upgraded my Server 2008 R2 server to Server 2012 R2 standard. I am at the login screen. I press control + alt + del and select the Administrator account (as usual). I enter my password and press enter. The screen turn black
and flickers, and then returns to the control + alt +delete screen. No matter how many times I attempt to login, it doesn't work. If I reboot the server, it rolls back to 2008 R2.
What can I do to get past this issue?

Hi Smidley,
In addition, I also recommend you can follow this article to perform the upgrade and feedback.
Note: you need to evaluate if software installed on your Windows Server 2008 R2 is compatible and supported on Windows Server 2012/2012R2. When you find any incompaticle software you need to upgrade or uninstall.
Windows Server 2008R2 in-place upgrade to Windows Server 2012/2012R2
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Anna

Can't login to Server App

I was working on my Mac Mini Server when it suddenly crashed and I was forced to press the power button to shut down. When I restarted my Mac Mini Server it started beeping so I powered off again.
Then I powered on my Mac Mini Server and it worked fine. However when I tried to open the Server App and tried to login it was not accepting my login details even if they were correct. Each time I tried the Server window just shakes.
Can somebody please help me in resolving this issue.
Thanks

As root go to /System/Library/LaunchDaemons and edit com.apple.servermgrd.plist and change the "Disabled" boolean to "<true/>". Then say:
launchctl load -w /System/Library/LaunchDaemons/com.apple.servermgrd.plist
For some reason that I have not discovered yet the system keeps changing the bool back to "false" on occasion.
- Kent

Can't login to Server.app after 10.7.3

I installed the 10.7.3 Server Combo update today, and now when I try to use Server.app to administer my server, it just shakes to tell me they are invalid (even though I'm logged in to the server with that username/password). Anyone else run into something like this?

this hasn't worked for me.
When i follow the additional steps using terminal, the second command brings back the same outcome - 'David is not in the sudoers file. this incident will be reported'.
I've been having trouble with login on for a week but didn't realise this was the problem. I've reset passwords, reinstalled OSX (twice) and now, bizarrely, i can log onto the mac mini as the administrator, but once logged in, the 'administrator' password doesnt work for anything. I can run Software Update because it comes up with a message:
"Software Update wants to make changes. Type an administrator name and password to allow this".
I then put in my password but it shakes and tells me its wrong.
Can anyone advise any other solution? I'm kind of stuck - because the system doesn't recognise my admin password for updates, i cant update anything. And also because my itunes library was set up by a newwer version (I reinstalled OSX believing it would fix it reverting it back to a previous version) i can't listen to any music.

Can't login to server application

I have not been using my server functionality much since I got my Mac mini server for my home network, so it has been awhile since I tried to access the server functionality. I can signon locally to my mini with an account with local admin privilege. When I try to startup the server application, I select my mini, and then I try to enter the same username and password to access the server, but those credentials fail to allow access.
I need a way back in. I really do not have any server functions configured, so I can nuke the configuration, but somehow I need to know how to establish a configuration at the expense of the current inaccessible configuration.

Please see this URL, posted in a previous thread.
http://java.sun.com/j2ee/1.4/docs/relnotes/troubleshooting.html#1026910
It is always a good idea to search the forum before posting a question.

Can't login SQL Server 2008 R2 Express management studio

Hi i recently installed SQL Server 2008 R2 management studio. When I try to login i select 'Database engine' as the server type, I'm not sure what server name I'm
supposed to be using but I tried .\SQLEXPRESS and authentication is 'SQL server Authentication'. But as for login and password I don't have one. During the installation I was not prompted to provide a login/password. As with the 2005 server installation I
could by selecting 'mixed'. So how do i login for the first time on SQL server 2008 if i dont know/have my login/password?

Hi,
Try below links :
http://blogs.msdn.com/b/sqlexpress/archive/2006/11/22/connecting-to-sql-express-user-instances-in-management-studio.aspx
http://stackoverflow.com/questions/360141/how-to-connect-to-local-instance-of-sql-server-2008-express
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/e880c3be-a874-4979-8874-7044c087318d/sql-server-express-default-username-and-password
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Can't login to Server management app

I installed Lion server this evening and I was able to access the Server management app. However just recently I'm no longer able to connect. Even the dashboard server widget doesn't display any info and just says "network error". The only thing I can think of that might have caused it was running the disk utility and verifying/repairing permissions. Is there any way that I can regain access to the Server management settings? Thanks.

Just confirmed that nothing is listening on port 311 which Apple document (http://support.apple.com/kb/ts1629) as
311
TCP
Server Admin, Workgroup Manager, Server Monitor, Xsan Admin
asip-webadmin
Remote server administration
Trying to figure out why nothing is listening on that port, but does anyone else have any ideas? On my "test" server, there is a listener on the port (I can telnet to the port and get connected).

Error on Opening "Embedded OC4J Server Preferences"

When I tried to open Tools-->Embedded OC4J Server Preferences, I got the following error:
java.lang.NullPointerException
     at oracle.ide.net.URLFactory.newURL(URLFactory.java:85)
     at oracle.jdevimpl.runner.oc4j.Oc4jWorkspaceConfig.transmogrifyConfigFiles(Oc4jWorkspaceConfig.java:224)
     at oracle.jdevimpl.runner.oc4j.Oc4jWorkspaceConfig.configureAll(Oc4jWorkspaceConfig.java:112)
     at oracle.jdevimpl.runner.oc4j.EmbeddedServerAdminCommand.doit(EmbeddedServerAdminCommand.java:50)
     at oracle.ide.CommandProcessor.invokeImpl(CommandProcessor.java:391)
     at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:343)
     at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:110)
     at oracle.ide.IdeAction.performAction(IdeAction.java:665)
     at oracle.ide.IdeAction$1.run(IdeAction.java:857)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
But it works in my colleague machine. What is wrong in my environment? We use Jdev 10g 9.05.1
Dan

If you have Web project, check if HTML Root Directory has got a Null value ?
Double-click on the project to bring up project properties
Select Input Paths
See the value for HTML Root Directory.
If it is Null or invalid, edit to make sure it is valid and Click ok.
If not, create a new/empty project and see if you can launch Embedded OC4J server preferences dialog for that project.
raghu
JDev Team

Missing Images and CSS when going to portal/server.pt can't login

Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
    ======= Diagnostic Run Complete =======
    Startup completion percentage: 100% (50 steps out of 50 complete)
    ===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
    Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
    AllowOverride None
# Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
    Options Indexes
    AllowOverride None
    Order allow,deny
    Allow from all
    <Files *.html>
        SetHandler type-map
    </Files>
    SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
    RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of        .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external

I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps.

OS X Server clients can't login after IP renumber and domain Name change

I can not seem to get the logins working again on my OS X server (10.9.4 w/ server 3.1.2 on a 1 yr old. MacMini) after I needed to renumber the IP and change the domain name. I destroyed the Open Directory server, recreated it and created one test account. If I log in to the client with a local account I can connect to the server (Go>Connect To Server) from the client using my newly created account, but when I try to login to the server using the same network account login I get the "shaking head" response immediately. I have rebound the server to this client and it says that network accounts are available, but seem to be at a loss to understand why it won't let me login...
The only error message I see in any of the logs is the following:
(AFP Error Log:) Sep 15 20:21:47 isis.mydomain.com AppleFileServer[3032] <Info>: major error <1>: No credentials were supplied, or the credentials were unavailable or inaccessible.
I'm not sure what credentials it is referring to. I created a self signed certificate that I am using with OD, could that be the one?

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. Follow these instructions to rebuild the Kerberos configuration on the master.
5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
7. Reboot the master and the clients.
8. Don't log in to the server with a network user's account.
9. Disable any internal firewalls in use, including third-party "security" software.
10. If you've created any replica servers, delete them.
11. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.

Can't login to Server Preferences

Similar Messages

Maybe you are looking for