Can't login with sqlplus 'sys/password@DEV as sysdba'

Does anyone has idea why I get error message when I am logging using
sqlplus 'sys/password@DEV as sysdba'
ERROR:
ORA-01031: insufficient privileges
But I can login with sqlplus '/ as sysba' to DEV database.
Do I need password file for remote as sysdba with sys user also?
Thanks in advance

Do I need password file for remote as sysdba with sys user also?Yes. You can use orapwd command to create it.

Similar Messages

  • Can't login with name or password External Drive.

    This may have been covered, But as I'm pressed for time i did a search but did not come across a fix for this issue.
    For months i have used a bootable cloned LaCie external drive using OSX 10.4.8. I began having some problems and traced it to the external drive. I did the permissions fix the utilities repair and disk Warrior. When done i decided to re-boot into that external drive and it loaded very slowly and then presanted me with a login window that has no user name. So i put in the name that always comes up and the password and it denied me access. I tried all I could but no access. I even re-cloned the drive and same thing. The external drive mounts on my desktop and i can see everything and i have access to everything but i cannot gain access from the login point. Any suggestions. I could re-install the OS as the drive is a clone and losing the data would be OK. But if these an easier way i would like to know what it is.
    Barry

    Perform the instructions in sections 1 and 2 of this article; if your issue persists, perform the instructions in sections 1 and 3, and then recreate the accounts in the same order they were initially created.
    (18549)

  • Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
    On the password and keychain issue that your post is all about.  I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
    The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
    Two tips I can share, at least with webmail access:
    1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
    2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
         I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
    Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
    BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
    From my experimentation, here's my observation:
    1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
    2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
    The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

  • Can't login even after resetting password using install disk

    I have been unable to login in using the password on this computer. Twice now I have reset the password using the install disk that came with the computer. After resetting. I quit the installer and then reboot using the computer's startup disk. When I try to login with the new password, it won't let me uses the password even though the new hint is correct. How can I solve this?

    I think you have two choices...
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
    It'll boot like a newly setup Mac, but all your stuff should still be there once filling out the stuff.
    Or, an Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120
    Just be sure to select Preserve Users & Settings.
    But first...
    "Try Disk Utility
    1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes. (May or may not work)

  • My Iphone 4s ios 8.1.3 and has been upgraded to 8.2 cant login with the correct password, it is correct on pc but is read wrong in the device. also mail. help me please

    My Iphone 4s ios 8.1.3 and has been upgraded to 8.2 cant login with the correct password, it is correct on pc but is read wrong in the device. also mail. help me please

    Hi Eslam El-Gammal,
    Welcome to the Apple Support Communities!
    I understand that after resetting your iPhone, you are being prompted for Apple ID information that is not yours. This can happen if an iPhone is restored without turning off the Find My Phone feature. For more information on this, please refer to the attached article. 
    Find My iPhone Activation Lock - Apple Support
    Best regards,
    Joe

  • Can't login with opera?

    Hi, since the end of last week I can't login with Opera. I just get 500 internal server error.
    Login with FF works, but FF doesn't remember forum password (and I know others have the same problem). Could you please fix that rather that opera login :-)

    Try this (from a post i made a while ago):
    To log in easily, go to the login page, view source, and look for the following INPUT field: site2pstoretoken
    Then, construct a URL as follows: https://login.oracle.com/sso/auth?site2pstoretoken=<site2pstoretoken>&ssousername=<login email>&password=<password>
    In FF, not in IE, it seems that old tokens work. So, after logging out the old token can be used: https://login.oracle.com/sso/auth?site2pstoretoken=<site2pstoretoken>

  • My iPad 4 tried to open application but repeatedly iCloud asked for login with apple id password. I put my apple id password correct,even i reset it again but still it does not accept in iPad .i am bored with this 3rd class application.please help

    My iPad 4 tried to open application but repeatedly iCloud asked for login with apple id password. I put my apple id password correctly,even i reset it again but still it does not accepted in iPad .i am bored with this  class application.please help.After every 1 second icloud logoin asked.

    Find Apple ID
    https://iforgot.apple.com/applied
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESK

    I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESKTOP APP OR EVEN SOLUTION OF RUN OF IMSLIBREPLACER  IM STIILL NOT ABLE TO LOGIN TO MY CREATIVE CLOUD FOR DEKTOP APP . PLEASE HELP ME AS I NEED TO GET IN AND EXPLORE MORE OF MY DOWNLOADED S/W
    I HAVE TRIED ALL POSSIBLE SOLUTION BUT AM AMAZED HOW THIS IS HAPPENING TO ME.
    PLEASE PLEASE HELP ME .Creative Cloud Connection

    Hi Alfred,
    I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
    1) Go to Start button>> Control panel>> Uninstall a program.
    2) Check if you see Browser safeguard there, if yes then uninstall it.
    3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
    -Ankit

  • When I go to update my apps and it asks me to login with my daughters password and on her phone it ask her for my id

    when I go to update my apps, it asks me to login with my daughters password and on her phone it ask her for my id & password .
    Well our names pop up and it ask for the password. But when we enter them it wont work. But if an app is downloaded, the
    correct name and password shows up. We both have Iphone 6 plus. She downloaded her information on my computer when she
    did her first restore. Do we have to restore them all over again?

    Go to Settings>iTunes & App Store
    Click on the Apple ID that appears and select Sign Out
    Regards,
    Steve

  • Can you login with a pc into open directory like you login with a mac into open directory?

    Can you login with a pc into open directory like you login with a mac into open directory.

    AustinRockes16,
    Have you considered posting your question on a Windows forum, asking on a general iMac forum where most users use OS X probably may not yield the results you are looking for.

  • Login Problems Can't login I Forgotten my password I did't get the confirmation email.

    Login Problems Can't login I Forgotten my password I request a password Reset but I did't get the confirmation email.

    Would you please clarify what site you are trying to log in to?
    If the service is not a Mozilla service, it might be best to contact the customer support of that site instead of Mozilla Support, as they'll be better able to help resolve your problem.
    Thanks! :)

  • [Solved] Can't login with current keyboard layout and `@` in password

    Hi, I'm a new arch user. I followed archwiki to install Enlightenment17. All went fine but I have a problem to login since during setup I inserted '@' in root/regular user passwords. During setup I selected the Italian layout and all seems ok, except grafical login through entrance (from aur, but I tested also kdm, with same results): password not recognized. Before asking, is not a CAPS/NUMLOCK issue since the password works using it in console login. I discovered that I can type '@' with the following combination: SHIFT+2; in an italian keybord this should print a double quote (") but in entrance (and kdm) it correponds to '@'. After login this way, the keyboard works normally (for instance using 'su'). So the problem is limited to graphical login (entrance and kdm) during which a different keyboard layout is used.
    Did I miss some config file?
    For the sake of clarity:
    1) /etc/locale.gen has "it_IT.UTF-8 UTF-8" uncommented
    2) /etc/locale.conf contains "LANG=it_IT.UTF-8"
    3) /etc/vconsole.conf contains "KEYMAP=it"
    4)
    $ locale
    LANG=it_IT.UTF-8
    LC_CTYPE="it_IT.UTF-8"
    LC_NUMERIC="it_IT.UTF-8"
    LC_TIME="it_IT.UTF-8"
    LC_COLLATE="it_IT.UTF-8"
    LC_MONETARY="it_IT.UTF-8"
    LC_MESSAGES="it_IT.UTF-8"
    LC_PAPER="it_IT.UTF-8"
    LC_NAME="it_IT.UTF-8"
    LC_ADDRESS="it_IT.UTF-8"
    LC_TELEPHONE="it_IT.UTF-8"
    LC_MEASUREMENT="it_IT.UTF-8"
    LC_IDENTIFICATION="it_IT.UTF-8"
    LC_ALL=
    Thanks for any help.
    Last edited by bull3t (2013-03-03 14:10:15)

    cfr wrote:Have you tried specifying a variant?
    I exclude a variant problem considering that in any other condition the keyboard layout is right. The system is configured for an it KEYMAP but it is obvious that in entrance/kdm is used an 'us' map. Is this hardcoded somewhere? I also tryed to comment out any entry in /etc/locale.gen except 'it_IT.UTF-8 UTF-8': still 'us' keymap in graphical login screen.
    Probably a kind user with a non-us keyborad layout could create a dummy user with password containing '@' or '#' or any other special symbol to verify that this condition is reproducible, a first step for a bug report.
    Cheers

  • Can not login with email address and password registered with HP

    I set up an eprint D110 at another location.  I am trying to send to that printer.  I can not login to eprint with the email address and password that I set up.  What do I do now?

    Hi there, are you having trouble logging into the ePrint Center at this point (see the image below)?
    If so, you can click on the Forgotten your password link where you will be prompted to enter the e-mail address you used to setup your ePrint Center account. If you can't remember the e-mail you used to setup the account you can do the following:
    From the display on your printers front panel remove web services by clicking Setup>Wireless>Web Services
    Once this is done, re-enable web services by following the same path. The printer should print an information sheet once you've re-enabled web services. This sheet will contain a new printer code. 
    In ePrint Center click the Sign-In button and then select the Sign Up option at the top of the box
    Go ahead and setup a new ePC account and when prompted enter the new printer code from the information sheet
    Your printer is now no longer attached to your old ePC account and will show up in the Printers section of your new account.
    Just be aware that the printer now has a new e-mail address so if you've shared the previous address with family or friends you'll need to let them now the new one.  
    If you found this reply helpful please click the kudos button and if it solves your problem please click the Accept as Solution button so that other forum users may use the solution to help solve their problem.  
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Newbie sqlplus login only works with sqlplus username/password@xe, why?

    I am using the Express edition 10g on an ubuntu linux 686 box . I have the oracle xe service running and have my bash environment setup correctly . However When I say
    just "sqlplus" to connect to my databases
    The sqlplus application prompts me for username first and then for the password. However it never recognized either and gives the following errors
    ORA-01034 : Oracle not available
    ORA-27123 : unable to attach to shared memory segment
    Linux Error: 13: Permission denied.
    If I instead in the same shell I run
    sqlplus username/password@xe
    Then it logs me in fine without any errors.
    I wanted to understand why the first way where I enter my username and password at the prompts does not work and give me the ORA-01034 and ORA-27123 errors since a lot of the installation seemed a bit of a blackbox for me.
    Thanks for your help in advance
    Hari

    Hi Avi,
    I have setup my environment as mentioned in the installation docs
    So despite that I am getting the errors.
    The only way to not get the error is to say sqlplus username/password@xe
    Here is what the ORACLE_HOME and Oracle_SID are set to:
    myname@hjubuntu:~$ echo $ORACLE_HOME
    /usr/lib/oracle/xe/app/oracle/product/10.2.0/server
    myname@hjubuntu:~$ echo $ORACLE_SID
    XE
    myname@hjubuntu:~$ sqlplus
    SQL*Plus: Release 10.2.0.1.0 - Production on Sat Dec 4 00:41:00 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter user-name: myname
    Enter password:
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27123: unable to attach to shared memory segment
    Linux Error: 13: Permission denied
    Thanks
    HJ
    Edited by: 817787 on Dec 3, 2010 9:44 PM

  • Can't Login with SID

    I have seen several threads about this issue, but so far I can't figure it out. I don't know if my problem is different from the other people or if I am just missing something in the other threads.
    I can login as SYSDBA if I set the ORACLE_SID variable, but if I try to specify it, with "/@FN91DMO", it won't work!.
    Here's some commands to show you what is going on:
    $echo $ORACLE_SID
    FN91TRN
    $ll $ORACLE_HOME/dbs/orapwd$ORACLE_SID
    -rw-r-----. 1 oracle dba 1536 Dec  1 21:05 /oracle/home/dbhome_1/dbs/orapwdFN91TRN
    $grep -i REMOTE_LOGIN_PASSWORDFILE /oracle/control/FN91TRN/initFN91TRN.ora
    remote_login_passwordfile=exclusive
    $sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.3.0 Production on Thu Dec 1 21:24:28 2011
    Copyright (c) 1982, 2011, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> show parameter REMOTE_LOGIN_PASSWORDFILE
    NAME                         TYPE      VALUE
    remote_login_passwordfile          string      EXCLUSIVE
    SQL> connect /@FN91TRN as sysdba
    ERROR:
    ORA-01031: insufficient privileges
    Warning: You are no longer connected to ORACLE.
    SQL> I don't understand why I get the insufficient privileges.
    I would be fine with just using the ORACLE_SID variable, but I need the @FN91TRN syntax for RMAN:
    [oracle@lxdb02 ~]$ rman TARGET /@FN91DMO NOCATALOG AUXILIARY /@FN91TRN
    Recovery Manager: Release 11.2.0.3.0 - Production on Fri Dec 2 10:28:06 2011
    Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of internal recovery manager package failed
    RMAN-04005: error from target database:
    ORA-01031: insufficient privilegesCan anyone give me any tips to check toward fixing this? -- Thanks

    Ok, so here are the tnsping and lsnrctl outputs:
    $lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 03-DEC-2011 04:51:43
    Copyright (c) 1991, 2011, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
    Start Date                01-DEC-2011 21:17:20
    Uptime                    1 days 7 hr. 34 min. 23 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   /oracle/home/dbhome_1/network/admin/listener.ora
    Listener Log File         /oracle/home/dbhome_1/log/diag/tnslsnr/lxdb02/listener/alert/log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=lxdb02.pugetsound.edu)(PORT=1521)))
    Services Summary...
    Service "FN91CFG" has 1 instance(s).
      Instance "FN91CFG", status READY, has 1 handler(s) for this service...
    Service "FN91CNV" has 1 instance(s).
      Instance "FN91CNV", status READY, has 1 handler(s) for this service...
    Service "FN91DMO" has 1 instance(s).
      Instance "FN91DMO", status READY, has 1 handler(s) for this service...
    Service "FN91TRN" has 1 instance(s).
      Instance "FN91TRN", status READY, has 1 handler(s) for this service...
    The command completed successfully
    $tnsping FN91TRN
    TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 03-DEC-2011 04:52:11
    Copyright (c) 1997, 2011, Oracle.  All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = <removed>)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = FN91TRN)))
    OK (0 msec)
    $Here are the parameters:
    $sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.3.0 Production on Sat Dec 3 04:54:30 2011
    Copyright (c) 1982, 2011, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> show parameter SEC_CASE_SENSITIVE_LOGON;
    NAME                         TYPE      VALUE
    sec_case_sensitive_logon          boolean      TRUE
    SQL> show parameter remote_login_passwordfile;
    NAME                         TYPE      VALUE
    remote_login_passwordfile          string      EXCLUSIVE
    SQL> select * from v$pwfile_users;
    no rows selectedThat was my problem !!! I had an extra "d" in the password file. I had orapwdFN91TRN instead of orapwFN91TRN.
    I recreated it like this:
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> exit
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    $rm /oracle/home/dbhome_1/dbs/orapwdFN91TRN
    $orapwd file=/oracle/home/dbhome_1/dbs/orapwFN91TRN password=test entries=2After I started the database, I could connect with the SID:
    SQL> connect sys/test@FN91TRN as sysdba
    Connected.
    SQL>  show parameter remote_login_passwordfile;
    NAME                         TYPE      VALUE
    remote_login_passwordfile          string      EXCLUSIVE
    SQL> select * from v$pwfile_users;
    USERNAME                 SYSDB SYSOP SYSAS
    SYS                      TRUE  TRUE  FALSEThank you for all of the help. It is very much appreciated. I read through those instructions, but I just didn't catch the name difference. Thank you for catching it for me.

Maybe you are looking for

  • PlzzReply.. rlly Urgent:Transfer Struct. Prefix Error while Activating ODS

    Hello BW Gurus, When I am trying to activate my newly created ODS , the following error is one among the 3-4 errors : "Transfer Structure prefix is not defined for T90CLNT090 system". I am using ECC 5.0:BW 3.5 I followed the steps provided in the fol

  • Mail showing the same mail messages twice

    i configured my apple mail program a couple weeks ago, and everything was fine. then i look in my verizon email inbox, and now there is 2 of every email. that wasn't there earlier. my other email accounts in apple mail don't have this problem. what a

  • How to set up an RSS reader or RSS feed

    Can you please help me to set up an RSS feed. 

  • Ade wont show my ereader

    ok guys you have been so much help so far and i am hoping that once again you will be able to help me.  after having my authorizations reset my e reader worked fine intell today.  now when i plug in my libre it doesnt show up in my bookshelves like i

  • Field limitations - import chart of accounts

    Hello All! I have a client that has decided they would like to import their general ledger chart of accounts.  They have decided on a segmented chart of accounts, with the first segment being 8 characters.  In that segment they want to use a '.' in t