Can't make a 1 1/4" bleed on one side of document...

Hey everyone.
I'm having difficulties customizing my bleed margin in Illustrator CS4.
I'm doing a book cover design and my client asked that there be a 1/8" bleed all around except for the left side, which they need to be 1 1/4" to accomodate a spine.
Problem is that Illustrator won't let me!  It says that the numeric value has to be between 0 and 1 only.  Isn't there a workaround??
Thanks,
B.

As far as I have been able to find, Illustrator maxes out their bleed at 1". My "workaround" is usually to switch to InDesign (which can handle bleeds up to 6") or build the files at a 50% scale (and direct my printer to adjust in their RIP). Or you could do it the old-school way and let out your artboard to the bleed size + crops and manually create crop marks.
If you do find a real workaround, I'd love to know what it is as well.

Similar Messages

  • How can I make two copies of the same picture one with my watermark and one without for printing for clients?

    how can I make two copies of the same picture one with my watermark and one without for printing for clients?

    Export the photo twice, once with a watermark and once without a watermark.

  • How can I make the ipod stop itself after playing one song?

    How can I make the ipod stop itself after playing one song?

    When playing a song, are the controls at the top of the screen there? (Genius, Shuffle, Loop?)
    If not, tap the center of the page once to expose them
    now keep tapping the circle on the left part of the exposed controls untill a one (1) appears...

  • HT1515 can I make the Airport Express secured so no one else can use it?

    Can I make the Airport Express secured so no one else can use it?

    Choose a security protocol, WPA2 personal suggested. Then choose and install a strong password. Only users who are cognizant of your password will be able to connect to your wifi network. Of course, you'll need to do this via your Airport Utility application.

  • How can I make more than 1 chart arrays in one chart?

    hello everybody,
    I'm a student from the htl mödling. this year I'll have my diploma and I have to simulate a protection for a high voltage wire. I have to create three zones in a chart, than I must measure voltage and current of the three hot wires to calculate each impedance. is this impedance out of the zones the system is okay, if it's not there is a failure. now i have to know in which zone the failure is.
    how can i do this?
    please help me!
    yours karin

    The default history length of a chart is 1024. To make it longer is a right click option.

  • How can i make a full screen image on a one page website

    I am making a one page website with 5 items. I want with each item a fullscreen (responsive) image. Can i do that in Adobe muse?

    When you say "responsive" do you mean; Desktop/Phone/Tablet.

  • How can I make a form where text flows from one line to another?

    I have created a fillable multi page form in Adobe Acrobat Pro XI. The form was originally created in InDesign, using lines for text. I saved as an interactive pdf, opened in Acrobat Pro, and created a form using the "Create Form" function. This worked great, but some parts of the form have multiple lines that need to be filled out, so the customer would continue typing and the type would flow from one line to the next. Right now the lines are individual fields. Can I easily convert these fields so that the text goes from one line to the next as the person filling out the form types?
    Thank you for the help.

    The easiest way is to do a slight redesign to get rid of the lines and then use a multiline field instead of multiple single line fields. If you really need to have the lines, you can use an approach that's demonstrated in the following sample: https://workspaces.acrobat.com/?d=AG6oZ3bi3DYHokxDPeWN7A
    You may come across attempts to use JavaScript to automatically move to the next field when the previous one is filled-up, but I've never seen this work very well.

  • How can we make use of DIMENSIONS in SAP Business One ??

    Hello everyone... how can the dimensions be used for detailed information.. pls reply on it.. its urgent,,
    Thanx
    Abhay Sharma
    +91-98996-89449

    Maybe a bit closer this time?
    <b>IF you have your branches set up as "Profit Centers",</b> then you can run an individual trial balance on each profit center as follows...
    Reports > Financials > Trial Balance > Trial Balance - Selection Criteria Window
    On the Selection Criteria Window, uncheck "BP" box and then select the account categories/accounts you want to have in the trial balance.
    Then select the "Expanded" button in the lower right hand corner and it leads to the Expanded Selection Criteria Window.
    Select the individual Profit Center (branch) you want and then run the report...you might want to then run a report with all branches as a control/audit report...
    Hope that helps...
    Zal

  • Can i make 2 link point-to-point with one ap ?

    I wonder if i can connect 2 branch with one headqueater, the idea is out one ap1300 with 2 atennas ominidirections, each one to a brach with a ap.
    pls help

    Take a look at the bridge distance calculator here:
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps458/prod_technical_reference09186a00800a912a.xls
    This shows us that, assuming a 12 dBi omni (such as the ANT24120) at your root, the 13.5dBi Yagi is complete overkill for a 300 meter link- you could get 54 megs with the 10 dBi Yagi or even the 8.5 dBi patch antenna.
    On the other hand, even with the dish on the other side, you can't get a 54 mbps datarate over 3 km. Depending on your bandwidth requirements, a 36 meg link to the second branch may be acceptable... but remember that the link to the first branch is contending for the same channel, plus protocol overhead, so you're going to get less than half the nominal datarate for each link.
    So, depending on your bandwidth requirements, you have several different options:
    1) The star topology you described. Lowest bandwidth option since both links are on the same channel.
    2) A pair of 1300s with 9dBi patch antennas for link 1, and another pair of 1300s with the built-in antenna option for the second link. Better than option 1: this gives you 54 megs on link 1 and 36 on link 2.
    3) A pair of 1300s with 9dBi patch antennas for link 1, and a pair of 1400s with the built-in antenna or a pair of 1300s with dishes for link 2. This gives you 54 megs on each link.

  • How can I make my Music playing on more than One AirPlay device ?

    How can i Play my IPhone Music on more AirPlay devices than One ?
    When i double Click the home button to come to the AirPlay options it's only avaiable to select One of the airPlay devices, the device chosen before turns off.
    So can anybody Tell me how to do that, or is it impossible to do that ?
    Sincerely
    JLK

    Not possible to do so at this time.

  • How can I make the playlist column appear on the left side of iTunes?

    Help! I'm left handed nearly always set everything up to the left side of the page. I'm having trouble training my brain to navigate on the new iTunes home page. Moving playlist info. etc. to the right said of the page is uncomfortable for me and distracting. Anyone know how to move this column from the right side of the page to the left?

    Well, that was easy! Thanks, Steve. Much appreciated!

  • How can I make a second copy so I can make some changes, but lose the original document?

    How can I make a copy of my new pdf convert to word document without losing the original document?

    Hi mariponce,
    Is it the Word document that you want to make a copy of, or the PDF? In either case, you can choose File > Save As (in the appropriate application), and give the file a new name. For example, if you have a file named "HappyTimes.docx," you could choose File > Save As, and name the file "HappyTimes2.docx." Then, you'll have two Word files, and you can edit one and leave the other intact.
    Best,
    Sara

  • How can I make row labels appear on the right

    I am creating a timeline for a web development project in numbers
    I have changed the content scale to get it to fit on two pages (it's illegible on one page) but the tasks are overlaid on the grey column containing row labels
    How can I make the row labels appear on the right side instead of the left side?

    Thanks Badunit - that was a big help
    The counterintuitive part of this whole exercise is that to get the timeline printed as I want, I've got to leave the column representing Week 8 blank
    Print View:
    Normal View:
    Numbers has got Excel beat in so many ways, but there are some baffling bits to it!

  • Make Data Merge import certain page of pdf or indesign document

    I don't know if it is possible but can you make Data Merge import certain page of pdf or indesign document, this would be great addition for indesign

    Here are a couple of questions that might help understand what might need to be done to achieve your request:
    * How do you propose to identify the desired page(s) within a PDF and an ID document, so the merge field placeholder knows how to find it?
    * How do you propose to keep track of the page if they're re-ordered in an updated document?
    * What if the identification marker is within text and flows to a different page - would you want to retrieve the original page (before the reflow) or the new page to which the marker would have flowed?
    Perhaps the scripters could comment on the possibility of scripting these.
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices
    aybekDes wrote:
    I don't know if it is possible but can you make Data Merge import certain page of pdf or indesign document, this would be great addition for indesign

  • How can I make a print-ready book-file in lightroom 4, with bleeds and crop marks?

    I am wondering if its possible to make a file that includes bleed and crop marks from lightroom 4?  I have made a book, but it lacks these features, which makes the printers unable to print my book. Do I have to use indesign instead?

    I am wondering if its possible to make a file that includes bleed and crop marks from lightroom 4?  I have made a book, but it lacks these features, which makes the printers unable to print my book. Do I have to use indesign instead?

Maybe you are looking for

  • Invalid Cursor Position Error

    Help! I am using JRun3.1 and developing a web interface to a database. In this particular screen, I am using CachedRowSet (I downloaded this and added it to jrun classpath). I am getting "Invalid cursor position" error. I feel there is a problem with

  • OMWD plant not appearing

    In transaction OMWD the plant is not appearing . I need to assign the valuation grouping code for the plant but the plant itself doesnt appear . The fields are greyed out . hence i cannot add or delete rows. Can u tell me where is the actual assignme

  • Time field in Smartforms

    How is the time field formatted in smartform. Format that has to appeared is hh:mm. But i'm getting hh:mm:ss. How to quote this?

  • Adobe Photoshop CS5 "Installer failed to initialize"

    Hey! So i Just downloaded CS5, I Open the .dmg and then i click on the install and i get a message which says "Installer failed to initialize". According to the support app this is the reason: "cpsid_83570: Conflicting processes running while install

  • Facetime Can't work

    I use ID-A on FaceTime and now I apply for 2ed ID-B for my FaceTime ID-B is already passed but it can't work on FaceTime my friend is same with me but her ID-A and ID-B both can work what's wrong with my iPad?Or what I should do? would you do me a fa