Can't make a Backup Domain Controller

I have one Open Directory Master and three replicas. The Master is also set to be the Windows Primary Domain Controller. But none of the replicas can join the domain or join as the Backup Domain Controller.
When I search the logs on the Master, I see:
could not find new user/computer luca$ in passdb
luca (a replica) is in Workgroup Manager. I even added a Kerberos entry for it.
Any help is greatly appreciated.

Solved my own problem...
Turns out that some users on the network took it upon themselves to join a Workgroup with the same name as our Domain. Samba doesn't seem to like that at all. So make sure your workgroup names are never the same as your domain names.

Similar Messages

  • Problematic issues in installing backup domain controller on Virtual Machine

    Hello,<o:p></o:p>
    I have a physical domain controller - windows Server 2012 R2 Standard installed
    in my domain environment and this is a first root domain controller.
    I have also Hyper-V Server 2012 R2 installed and joined in that domain. 
    Now I want to install an additional (Backup) domain controller as a virtual
    machine hosted on Hyper-V Server. So while promoting VM as a DC all actions and
    steps go well but the problem arise when I press the install button at the end
    of the promotion - installation gets stuck in the process of writing some
    configuration files on first DC and also in the process of replication. Unfortunately
    VM does not promote as a DC and it goes to restart.
    The error event log with - NETLOGON source is logged on the virtual machine as
    well.
    Do you have some suggestions with this issue, or experience how to resolve this..
    Thanks a lot in advance,
    GMG
    <o:p></o:p>

    Now I want to install an additional (Backup) domain controller
    There is no backup DC. All DCs are RW except RODCs.
    I would recommend first checking the health status of the existing DC using
    dcdiag command. Also, please check the IP settings in use: Please make sure that the existing DC has its primary IP address in use and that public DNS servers are set as forwarders and not in IP settings of the DC. For the new DC, please make sure
    that it points to the existing DC as primary DNS server and once promoted you can see the recommendations here to update the configuration: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
    Please also disable temporary all security software in use on the DCs and make sure that needed ports for AD replication and authentication are not blocked or filtered between the DCs.
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • STMS Backup Domain Controller.

    Hi,
    I  want to configure a backup domain controller in my SAP system. The current controller is on my Production (PRD). I would like to configure the backup controller on Development (DEV).
    Currently, my OS is on AIX. The NFS is at Production for /usr/sap/trans.
    My question is, if I have a hardware problem in PRD that also impact my NFS, the backup controller that was created would also be pointless? Please correct me if I am wrong.
    Hope to get feedback.
    Thanks in advance,
    IAzir.

    Hi,
    I know individual /usr/sap/trans can be implemented in Windows but not in UNIX.
    Unix uses NFS. I might be wrong. Have your tried it before?

  • How can I make a backup of my iWeb page, How can I make a backup of my iWeb page

    How can I make a backup of my iWeb page? Is iWeb also disappearing on June 30?

    Here are some Apple help sheets about backing up your files:
    http://support.apple.com/kb/HT1813
    http://support.apple.com/kb/HT1105
    And I found this one written by an independant guy very thorough and helpful:
    http://iwebfaq.org/site/iWeb_Backup_retrieve.html
    iWeb is not going away, but I would be skeptical about how much longer Apple keeps it around. 
    If you are looking for a new place to host your website, I use and would recommend Little Oak (www.littleoak.net).  They are a Mac hosting company, and are even offering a discount right now for iWeb users (http://www.thewhir.com/web-hosting-news/web-hosting-sales-and-promos-roundup-jun e-29-2012)

  • Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

    Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

    I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
    trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
    The problem was the separated System Reserved Partition. After I removed using this instructions:
    http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
    The upgrade ran ok, and now have my DC as Windows 2012 R2.
    Hope that helps!.

  • How can I make a backup listing of all of my Firefox bookmarks, with complete URLs, so I can print it out from a word processing document?

    == Issue
    ==
    I have a problem with my bookmarks, cookies, history or settings
    == Description
    ==
    How can I make a backup listing of all of my Firefox bookmarks, with completely written out URLs, so I can print it out from a word processing document? Please email me the answer-
    [email protected]
    <blockquote>duplicate. Locked. Please continue [https://support.mozilla.com/en-US/forum/1/727213 here] -MJB</blockquote>
    == Firefox version
    ==
    2.0.0.4
    == Operating system
    ==
    PPC Mac OS X Mach-O
    == User Agent
    ==
    Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4
    == Plugins installed
    ==
    *-Netscape Navigator Default Plug-in
    *Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Test Your JVM.
    *Plugin that plays RealMedia content
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
    *Shockwave Flash 9.0 r260
    *Provides support for Digital Rights Management
    *Provides support for Windows Media.
    *Java 1.3.1 Plug-in (CFM)
    *Macromedia Shockwave for Director Netscape plug-in, version 8.5.1
    *Java 1.3.1 Plug-in

    Hello.
    Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].

  • How can I make a backup to an external hard drive from iPhoto if it won't open?

    how can I make a backup to an external hard drive from iPhoto if it won't open? I just wan't to make a backup to my pictures not my entire computer so how does Time Machine work on that?

      you could also clone the drive or volume, or just some of the user folders. look for carbon copy cloner, then enable the "use checksum to insure file integrity."
      you can have multiple iPhoto Library catalogues in different locations.
    Continue to use TimeMachine and make sure it has 350% or more capacity than your system and data.

  • How can I make a backup from my Macbook Pro?

    How can I make a backup from my Macbook Pro?

    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
         used to manage backups and to restore backups. Time Machine
         requires a backup drive that is at least twice the capacity of the
         drive being backed up.
    See Mac Basics- Time Machine. Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Although you can buy a complete external drive system, you can also put one together if you are so inclined.  It's relatively easy and only requires a Phillips head screwdriver (typically.)  You can purchase hard drives separately.  This gives you an opportunity to shop for the best prices on a hard drive of your choice.  Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu.  You can find reviews and benchmarks on many drives at Storage Review.
    Enclosures for FireWire and USB are readily available.  You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports.  I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.)  You can find enclosures at places such as;
      1. Cool Drives
      2. OWC
      3. WiebeTech
      4. Firewire Direct
      5. California Drives
      6. NewEgg
    All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover.  Usually the only tool required is a small or medium Phillips screwdriver.

  • How can I make a custom domain email for my client?

    I have an Adobe Muse subscription, with hosting through Adobe, and the Domain name is also with Adobe. How can I make an email for a particular domain for my client so that it will use a "company email" (even if it just redirects to say a gmail or yahoo that is fine) to read "[email protected]?

    Hello,
    As I can see you have a WebBasic Creative Cloud site, I would suggest you to use GoogleApps for your e-mail services.
    Please have a look at the article which would help you achieve this : http://helpx.adobe.com/business-catalyst/partner/setting-google-apps-email-business.html
    Hope this helps.
    Regards,
    Sachin

  • IMac with OS X 10.5.8, iTunes 10.6.3 - and now i can't make a backup for iPhone 4s

    I have bought an Iphone 4S and want to make a backup to get my old dates. But, my iMac has Version 10.5.8 - and doesn't allow me to install iTunes 11.1. which is requestet from the iphone to make the backup. What can I do??

    If it's an Intel iMac, upgrade the computer to Mac OS X 10.6.3 and then 10.6.8 and make the backup.
    If it's a PowerPC Mac, you can't back the device up to the computer but may be able to back it up to iCloud.
    (97226)

  • Can I make the personal domain go away?!

    Problem: I played with the personal domain thing in the 2.0 phase of iWeb, and decided to wait until the update fixed things. I USED to have my GoDaddy URLS point to each of my various iWeb sites, which they still do. However, when I publish now, iWeb loads to that personal domain, and I can't make it stop. I never changed the CNAME or anything on my GoDaddy site, just went on .Mac to add a personal domain to the list.
    Can I make iWeb STOP trying to load to that personal domain? I deleted it from the .Mac page, but iWeb still shows it at the bottom of the pane as a green dot followed by my email (domain). Now EVERY site loads to that domain, followed by /sitename.
    Old domain: www.swatphysician.com pointed to
    Old iWeb site: http://web.mac.com/macdaddymd/iWeb/swatphysician
    New iWeb is www.swatphysician.com/swatphysician
    I tried republishing the entire thing to .Mac after I deleted that personal domain from .Mac, but it did the same. What I want to do is go back to the old way... use my GoDaddy redirect to point to the various sites by their own personal domain names (www.76whs.com, www.76lancers.com, etc.).
    Can I make iWeb forget it ever heard of my personal domain?!

    I explored the possibility of setting up the personal domain feature, but was unable to get the support needed from my host to ensure that it would function properly. I'm considering simply using web forwarding to send people where they need to go. I added and removed the personal domain information from within my .Mac account and it had nothing to do with iWeb. Maybe I'm clueless on this, but that was my experience.
    Anyone who has previously been pointing to their .Mac iWeb site will discover that all the addresses will change after upgrading to iWeb 2.0.1 version. At least, that was my experience. Blog entries have a completely new method for naming pages (old pages are given new URLs based on the new naming system). The entire site was under an iWeb folder (as you pointed out in your message). The new sites are located directly under your .Mac account name.

  • Can't make offline backup after system copy

    Hi to all!
    After the system copy of Solution Manager 7.01 ehp 1 from Windows to RHEL Linux I can't make the offline backup. SolMan work normaly.
    Online backup works normally too.
    But I have no *.spi and *.spu files in the backup directory (like benziefn.spi). I tried to update brtools - it doesn't help. I run brtools under orasid user.
    Thanks for help!
    BR0051I BRBACKUP 7.40 (9)
    BR0055I Start of database backup: benziefn.afd 2014-06-02 10:00:47
    BR0484I BRBACKUP log file: /oracle/SM1/sapbackup/benziefn.afd
    BR0477I Oracle pfile /oracle/SM1/112_64/dbs/initSM1.ora created from spfile /oracle/SM1/112_64/dbs/spfileSM1.ora
    BR0280I BRBACKUP time stamp: 2014-06-02 10:00:50
    BR0057I Backup of database: SM1
    BR0058I BRBACKUP action ID: benziefn
    BR0059I BRBACKUP function ID: afd
    BR0110I Backup mode: ALL
    BR0077I Database files for backup:
    /oracle/SM1/origlogA/log_g11m1.dbf
    /oracle/SM1/origlogB/log_g12m1.dbf
    /oracle/SM1/origlogA/log_g13m1.dbf
    /oracle/SM1/origlogB/log_g14m1.dbf
    /oracle/SM1/origlogA/cntrl/cntrlSM1.dbf
    BR0061I 42 files found for backup, total size 83909.619 MB
    BR0143I Backup type: offline_force
    BR0111I Files will be compressed
    BR0130I Backup device type: disk
    BR0106I Files will be saved on disk in directory: /oracle/SM1/sapbackup_remote/benziefn
    BR0140I Number of parallel copy processes: 8
    BR0280I BRBACKUP time stamp: 2014-06-02 10:00:50
    BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRBACKUP:
    c
    BR0280I BRBACKUP time stamp: 2014-06-02 10:01:31
    BR0257I Your reply: 'c'
    BR0259I Program execution will be continued...
    BR0064I Database instance SM1 will be shut down now
    BR0280I BRBACKUP time stamp: 2014-06-02 10:01:31
    BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRBACKUP:
    c
    BR0280I BRBACKUP time stamp: 2014-06-02 10:01:34
    BR0257I Your reply: 'c'
    BR0259I Program execution will be continued...
    BR0370I Directory /oracle/SM1/sapbackup_remote/benziefn created
    BR0202I Saving init_ora
    BR0203I to /oracle/SM1/sapbackup_remote/SM1 ...
    BR0202I Saving /oracle/SM1/112_64/dbs/initSM1.sap
    BR0203I to /oracle/SM1/sapbackup_remote/SM1 ...
    BR0280I BRBACKUP time stamp: 2014-06-02 10:01:34
    BR0198I Profiles saved successfully
    BR0280I BRBACKUP time stamp: 2014-06-02 10:01:34
    BR0307I Shutting down database instance SM1 ...
    BR0278E Command output of '/oracle/SM1/112_64/bin/sqlplus /nolog < /oracle/SM1/sapbackup/.benziefn.spi':
    SQL*Plus: Release 11.2.0.3.0 Production on Mon Jun 2 10:01:34 2014
    Copyright (c) 1982, 2011, Oracle.  All rights reserved.
    SQL> SP2-0310: unable to open file "/oracle/SM1/sapbackup/.benziefn.spu"
    SQL>
    SQL> SQL> SQL> SQL> SQL> SQL> ORA-01012: not logged on
    SQL>
    BR0280I BRBACKUP time stamp: 2014-06-02 10:01:34
    BR0279E Return code from '/oracle/SM1/112_64/bin/sqlplus /nolog < /oracle/SM1/sapbackup/.benziefn.spi': 0
    BR0302E SQLPLUS call for database instance SM1 failed
    BR0309E Shutdown of database instance SM1 failed
    BR0056I End of database backup: benziefn.afd 2014-06-02 10:01:34
    BR0280I BRBACKUP time stamp: 2014-06-02 10:01:35
    BR0054I BRBACKUP terminated with errors
    BR0292I Execution of BRBACKUP finished with return code 5
    BR0280I BRTOOLS time stamp: 2014-06-02 10:01:35
    BR0668I Warnings or errors occurred - you can continue to ignore them or go back to repeat the last action
    BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:

    BR0051I BRBACKUP 7.40 (9)
    BR0055I Start of database backup: benzipxv.afd 2014-06-02 12:12:39
    BR0484I BRBACKUP log file: /oracle/SM1/sapbackup/benzipxv.afd
    BR0477I Oracle pfile /oracle/SM1/112_64/dbs/initSM1.ora created from spfile /oracle/SM1/112_64/dbs/spfileSM1.ora
    BR0280I BRBACKUP time stamp: 2014-06-02 12:12:46
    BR0057I Backup of database: SM1
    BR0058I BRBACKUP action ID: benzipxv
    BR0059I BRBACKUP function ID: afd
    BR0110I Backup mode: ALL
    BR0077I Database files for backup:
    /oracle/SM1/origlogA/log_g11m1.dbf
    /oracle/SM1/origlogB/log_g12m1.dbf
    /oracle/SM1/origlogA/log_g13m1.dbf
    /oracle/SM1/origlogB/log_g14m1.dbf
    /oracle/SM1/origlogA/cntrl/cntrlSM1.dbf
    BR0061I 42 files found for backup, total size 83909.619 MB
    BR0143I Backup type: offline_force
    BR0111I Files will be compressed
    BR0130I Backup device type: disk
    BR0106I Files will be saved on disk in directory: /oracle/SM1/sapbackup/benzipxv
    BR0140I Number of parallel copy processes: 8
    BR0280I BRBACKUP time stamp: 2014-06-02 12:12:46
    BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRBACKUP:
    c
    BR0280I BRBACKUP time stamp: 2014-06-02 12:12:48
    BR0257I Your reply: 'c'
    BR0259I Program execution will be continued...
    BR0064I Database instance SM1 will be shut down now
    BR0280I BRBACKUP time stamp: 2014-06-02 12:12:48
    BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRBACKUP:
    c
    BR0280I BRBACKUP time stamp: 2014-06-02 12:12:50
    BR0257I Your reply: 'c'
    BR0259I Program execution will be continued...
    BR0370I Directory /oracle/SM1/sapbackup/benzipxv created
    BR0202I Saving init_ora
    BR0203I to /oracle/SM1/sapbackup/SM1 ...
    BR0202I Saving /oracle/SM1/112_64/dbs/initSM1.sap
    BR0203I to /oracle/SM1/sapbackup/SM1 ...
    BR0280I BRBACKUP time stamp: 2014-06-02 12:12:50
    BR0198I Profiles saved successfully
    BR0280I BRBACKUP time stamp: 2014-06-02 12:12:50
    BR0307I Shutting down database instance SM1 ...
    BR0278E Command output of '/oracle/SM1/112_64/bin/sqlplus /nolog < /oracle/SM1/sapbackup/.benzipxv.spi':
    SQL*Plus: Release 11.2.0.3.0 Production on Mon Jun 2 12:12:50 2014
    Copyright (c) 1982, 2011, Oracle.  All rights reserved.
    SQL> SP2-0310: unable to open file "/oracle/SM1/sapbackup/.benzipxv.spu"
    SQL>
    SQL> SQL> SQL> SQL> SQL> SQL> ORA-01012: not logged on
    SQL>
    BR0280I BRBACKUP time stamp: 2014-06-02 12:12:51
    BR0279E Return code from '/oracle/SM1/112_64/bin/sqlplus /nolog < /oracle/SM1/sapbackup/.benzipxv.spi': 0
    BR0302E SQLPLUS call for database instance SM1 failed
    BR0309E Shutdown of database instance SM1 failed
    BR0056I End of database backup: benzipxv.afd 2014-06-02 12:12:51
    BR0280I BRBACKUP time stamp: 2014-06-02 12:12:51
    BR0054I BRBACKUP terminated with errors
    BR0292I Execution of BRBACKUP finished with return code 5
    BR0280I BRTOOLS time stamp: 2014-06-02 12:12:51
    BR0668I Warnings or errors occurred - you can continue to ignore them or go back to repeat the last action
    BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:

  • How can i make a backup ?

    hello !!!
    i want make a backup for my Macbook pro

    The easiest way is usually using a backup software.
    With your Mac by default you got the 'Time Machine'. It's a nice software.
    As 'clintonfrombirmingham' already meantioned, you should get an external drive to back up, so if something happens to the harddisk (drop the laptop etc.), you can restore it to a different disk.
    Having that said, Time Machine is nice and all, but I'd recommomend using 'Carbon Copy Cleaner'.
    It does  essentially the same as Time Machine, however the backups you do with CCC are bootable.
    Means, in case the harddisk in your laptop dies, you can use the CCC backupon an external disk to boot your MacBook up from.
    In general, if it's just for smaller files, not the whole HD, just get a Dropbox.

  • How can I make a backup of all my Emails?

    I have to make a backup of my Emails and files etc. (DDS) in Mozilla Thunderbird in connection with moving my Email from an old account to a new account. Can anyone please advise how to do this?

    Backup the entire profile.
    http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Backing_Up_and_Restoring

  • Error -1. Can`t make a backup

    Friend, I`m having some problems to make a backup with TC.
    My TC has 1T and I`m running Lion 10.7.2
    I accidently deleted my sparsebundle and now when I try to run a backup I receive de following msg:
    The image of the backup disk "Volume/Time Capsule of XXXXXXXX/Mac Mini of XXXXXXX.sparsebundle cannot be accessed (error -1) (I`m brazilian and my system is in portuguese so, sorry about the poor translations).
    Of course TC can`t acces it, I DELETED =P, how do I fix this? Any ideas?
    Thx in advance!

    Friend, I`m having some problems to make a backup with TC.
    My TC has 1T and I`m running Lion 10.7.2
    I accidently deleted my sparsebundle and now when I try to run a backup I receive de following msg:
    The image of the backup disk "Volume/Time Capsule of XXXXXXXX/Mac Mini of XXXXXXX.sparsebundle cannot be accessed (error -1) (I`m brazilian and my system is in portuguese so, sorry about the poor translations).
    Of course TC can`t acces it, I DELETED =P, how do I fix this? Any ideas?
    Thx in advance!

Maybe you are looking for